December 2005 - openSUSE Users - openSUSE Mailing Lists

10.1a4: YOU not able to access remote online update servers
by Reinhard Gimbel 24 Dec '05

24 Dec '05

Hello community ! While installing 10.1a4 I found YOU not working. I also did various test after the installation was finished (without success so far ...). YOU is neither able to get the suseserver list and is not able to access sample remote online update servers like "ftp.suse.com". Network settings seem to be o.k. (I could "ping" and "ftp" "ftp.suse.com" or "ftp.gwdg.de"). The same hardware worked without any problem under various 10.0 snapshots (betas, RC1 and finally GM). As soon as I disable the the YAST2_LOADFTPSERVER-option and run YOU again with sample server setting like "ftp.suse.com" for servername and "pub/suse" (no leading slash !) for the folder on the server this two strings seem to be concatenated in a weird manner. With the next call to modify these settings the string for the folder is displayed as "%2fpub/suse" and as soon as this settings are stored the resulting path is displayed as "ftp://ftp.suse.com/%2f%252fpub/suse". The next attempt to open this obviously wrong setting shows "%2f%2f&2fpub/suse" and after exiting this dialog the resulting string is "ftp://ftp.suse.com/%2f%252f%252f%252fpub/suse". There seems to be a bug in the stringhandling for the path to access the remote online update server ! I filed this behaviour as bug #140744. Anyone out there who could give advice ? -- Never give up ! Best regards, Reinhard.

3 3

Slowly upgrading my system....
by Phil Burness 24 Dec '05

24 Dec '05

I'm about to start upgrading my system from a P111 800Mhz to probably an AMD Sempron 2800 64bit processor. I'll obviously be starting with the motherboard, CPU and memory. My plan was to swap the hard drives / DVD / CD devices straight over, then sometime later upgrade the hard drives (bigger capacity) and graphics card. What effect will I see if I take the drives as they are and connect them straight to the new motherboard / processor? I want to avoid a new install at this stage - although later I'd like to go to 64 bit. Phil -- Phil Burness Linux User since 1991 - currently using SuSE 9.3 Warrington - United Kingdom

3 5

Moving hard disk from hdc to hda
by Shibu Basheer 24 Dec '05

24 Dec '05

My SuSE 10 is installed on hda (IDE1). I would like to move it to IDE0 (hda). If I move it SuSE fails to boot up, I guess lilo or grub cannot find the root drive expected to be at hdc2. How will I fix this? Thank you. Shibu

6 7

NFS file locking problem between SuSE 10 Client and 9.3 server
by Jörg Spilker 24 Dec '05

24 Dec '05

Hello, i´ve some NFS filelocking problem between my SuSE 10.0 based clients and the 9.3 based server. /home is located on the server (with SuSE 9.3 and a recent kernel (2.6.15)). The clients are equiped with SuSE 10.0 and the default 2.6.13 kernel. Applications which are using NFS filelocking on /home (examples: eclipse, skype, banshee) are not working. The server log shows the following message: Dec 19 21:35:55 daolin kernel: lockd: cannot monitor 192.168.9.10 I know now (after googling for some minutes), that the reason for the message is, that the lockd on the server cannot contact the status daemon on the client site. rpcinfo on Server/Client shows the following info: Server: Suse Linux 9.3 with Kernel 2.6.15 daolin:/var/log # rpcinfo -p daolin Program Vers Proto Port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100004 2 udp 795 ypserv 100004 1 udp 795 ypserv 100004 2 tcp 798 ypserv 100004 1 tcp 798 ypserv 100007 2 udp 814 ypbind 100007 1 udp 814 ypbind 100007 2 tcp 817 ypbind 100007 1 tcp 817 ypbind 100009 1 udp 834 yppasswdd 600100069 1 udp 849 fypxfrd 600100069 1 tcp 851 fypxfrd 100011 1 udp 858 rquotad 100011 2 udp 858 rquotad 100011 1 tcp 877 rquotad 100011 2 tcp 877 rquotad 391002 2 tcp 601 sgi_fam 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100021 1 udp 2262 nlockmgr 100021 3 udp 2262 nlockmgr 100021 4 udp 2262 nlockmgr 100021 1 tcp 3171 nlockmgr 100021 3 tcp 3171 nlockmgr 100021 4 tcp 3171 nlockmgr 100005 1 udp 724 mountd 100005 1 tcp 739 mountd 100005 2 udp 724 mountd 100005 2 tcp 739 mountd 100005 3 udp 724 mountd 100005 3 tcp 739 mountd Client: Suse Linux 10.0 with Kernel 2.6.13-15-default daolin:/var/log # rpcinfo -p lotus Program Vers Proto Port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 391002 2 tcp 749 sgi_fam 100007 2 udp 810 ypbind 100007 1 udp 810 ypbind 100007 2 tcp 811 ypbind 100007 1 tcp 811 ypbind 100024 1 udp 32779 status 100021 1 udp 32779 nlockmgr 100021 3 udp 32779 nlockmgr 100021 4 udp 32779 nlockmgr 100024 1 tcp 32803 status 100021 1 tcp 32803 nlockmgr 100021 3 tcp 32803 nlockmgr 100021 4 tcp 32803 nlockmgr i´m not sure but i think that status is the service which the server can´t contact. There are no firewall rules active during my tests. I can telnet the tcp port for status from daolin. What looks strange for me are the high port numbers for lockmgr and status on the client. I really don´t know what is wrong. Greetings, Jörg

1 0

Sorry, relaying denied from your location
by Paul W. Abrahams 24 Dec '05

24 Dec '05

On one of my machines (not on the network I'm sending this from) I get the message "Sorry, relaying denied from your location" whenever I attempt to send email to an address not in the same domain as the sender. Other machines on the same network (running Windows) have no such problem, so I would guess the cause lies in my own machine. Where should I look to correct the problem? Paul

4 9

Why isn't my LAN, etc. working??? (SuSE 9.3)
by bernd 24 Dec '05

24 Dec '05

I have setup everything in yast (NFS, NIS, CUPS, etc.). I even downloaded and installed LISA, because it isn't on the cd's. I can ping every machine (2-9.3pro, 1-winxp) on the network successfully. I can access the SuSE machines via FISH only, not LAN. Sometimes I am told that the LISA daemon isn't running, yet when I check the running processes, it is on. I can't access printers; NFS doesn't mount; NIS hangs for a bit then timeouts, and shows up in the logs as a failed service. Sometimes if I fiddle with things, I'll get them to work, but the moment I reboot it to see if things took, all goes back to the way it was. My knowledge is limited. Yast is most usually my friend because I'm filling in boxes, etc. Please point me in the right direction. Thanks, Bernd

2 3

Ldap info
by ka1ifq 23 Dec '05

23 Dec '05

Hello All: I am looking for a good tutorial for an LDAP beginner, or maybe even a good beginner book. I have Googled and am still at it but decided to ask the list also. TIA Mike

2 1

Postfix clue ?
by Laurent Renard 23 Dec '05

23 Dec '05

Here's my "telnet localhost 25" : ehlo localhost 250-xxx.xxxxxx.myftp.org 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250 8BITMIME I cannot send & receive emails using my dyn dns name ... but i can acces it using telnet in port 25 Who could help me to enable pop or imap ? -- Laurent Renard

3 5

Default font
by Roland Turcan - RoTurSoft 23 Dec '05

23 Dec '05

Hello all! I would like to ask, which font is always present on all Linux distributions and could be sure, that user it has got for 100%. Thanks. TRoland.

2 1

Cheap pci network card ok ?
by SheridanJ West 23 Dec '05

23 Dec '05

Im looking to install (not bought yet a couple of ADMtek AN983 10/100 PCI netcards into a suse 9.2 box. It seems to compatible with Linux and the tulip driver (whatever that is) the suse hardware db has no mention of such a card, mfr etc So can anybody here tell me what it might be called, and whether suse will pick it up I'd rather ask the question now rather than find out it does not work. Card features 10/100M Fast Auto-Negotiation Ethernet PCI Card, 32bit PCI bus unit Complies with IEEE802.3, 100BASE-TX, IEEE802.3u 10BASE-T, stands Supports Half/Full-duplex flow control Support ACPI, supply PCI power management fuction to operation system with OSPM function PCI 2.2 plug & play The hardware db is telling me nothing exists. Anybody have any experiences with this card on the list ? Thanks

3 3

Re: [SLE] Tar backup question
by Matt Stamm 23 Dec '05

23 Dec '05

---------- Original Message ---------------------------------- From: Art Fore <art.fore(a)comcast.net> Date: Thu, 22 Dec 2005 16:10:05 -0800 >I have my system back up now and want to back it up. I would like to >backup the full disk with tar except for the /tmp /media /proc /dev >directories to a usb drive /media/SEAGATE. > >Could someone please write me the EXACT sytax to do this? The last time >I tried this, I ended up filling up the disk I was backing up with >nothing on the /media/SEAGATE drive even though I though I was following >the help on tar I found on the internet. > >Art > >-- >Check the headers for your unsubscription address >For additional commands send e-mail to suse-linux-e-help(a)suse.com >Also check the archives at http://lists.suse.com >Please read the FAQs: suse-linux-e-faq(a)suse.com > > > Art, I've been using tar to backup parts of my system for some time. I backup to a separate hard drive That I installed for backups only. I'm no tar expert but I'll post the script (see below), along with two file, the first indicating what gets backed-up, and a second indicating what to exclude (I'm not using that right now, but it's commented in the script) Maybe it will help. Matt Stamm ------- tar script ---->>> #!/bin/sh # mount backup partition mount /dev/hdd1 /mnt/backup # create log and tar file names today=`date +%Y-%m-%d` logfile="/mnt/backup/fbu$today.log.txt" tarfile="/mnt/backup/fbu$today.tar" # record starting time echo "Start..." > $logfile date >> $logfile echo "" >> $logfile # create tar # to exclude: --exclude-from=/root/backup/exclude_files \ tar \ --create \ --verbose \ --gzip \ --file=$tarfile \ --files-from=/root/backup/backup_files \ >> $logfile # record ending time echo "Done..." >> $logfile date >> $logfile # un-mount the backup partition umount /dev/hdd1 ----- backup_files (file) ---->> /home/matts/Backups /home/matts/MyStuff /home/matts/public_html /root/backup /srv/www/htdocs/MyStuff /var/lib/mysql ----- exclude_files (file) ---->> /home/matts/.kde /home/matts/.kde2 /home/matts/.mozilla /home/matts/.wine

1 0

Threading scripts?
by Rikard Johnels 23 Dec '05

23 Dec '05

Hello all! I have a small script to convert and resize images from my digital camera. #!/bin/bash ############################################################### # Converting Pentax .pef and .jpg files to 600x400 size jpegs # and store them in ./preview folder # Script must be run in the directory of the picturefolder you want to # convert from. # Utils used: 'dcraw', 'exiftools', 'ImageMagick' ############################################################### # # ToDO: Clean up the code. # Call with options or paths (from other scripts) # ############################################################### # # Tell us how many files we will convert. # echo `ls |wc -l` "files to convert" echo "creating ./preview folder" mkdir ./preview # Loop, convert and resize .pef files for infile in `ls *.pef |cut -d. -f1` # Find file name w/o extension do echo "converting RAW "$infile # Use dcraw to convert the RAW file and pipe to STD_OUT. # Grab the pipe directly into convert. dcraw -w -h -c $infile.pef |convert -resize 600x400 - ./preview/$infile.jpg # Use exiftool to write the metatags exiftool -q -overwrite_original -tagsfromfile $infile.pef ./preview/$infile.jpg done # Loop and convert (resize) the jpg's for infile in `ls *.jpg |cut -d. -f1` do echo "converting jpeg "$infile # No need to do anything but resize. convert -resize 600x400 $infile.jpg ./preview/$infile.jpg done ########################################## Is there anyway to thread this into multiple pipes?, so i can tell the script to convert two or more images at the time? Prefarably with a switch to set the number of threads. (ie. foo -n 3 to convert 3 images in parallell) -- /Rikard ----------------------------------------------------------------------------- email : rikard.j(a)rikjoh.com web : http://www.rikjoh.com mob : +46 (0)736 19 76 25 ------------------------ Public PGP fingerprint ---------------------------- < 15 28 DF 78 67 98 B2 16 1F D3 FD C5 59 D4 B6 78 46 1C EE 56 >

6 8

Changing Icons
by A. den Oudsten 23 Dec '05

23 Dec '05

Dear girls and guys, I have installed SUSE 10.0 and after that Netscape 7.2, WordPerfect 8 for Linux, Lyx and Gimp. Every time I start up the system now the icons for these applications have changed. Also when I use Konquerer all files in, for instance, /bin , /lib, /sbin and /usr/share/lyx/doc show changed icons. My system is: AMD K7 1200MHz Athlon 266MHz MSI-K7T-266-Pro VIA-KT266 socket-A GEFORGE-2 MX-200 32MB AGP + TV-Out LG CDRW 16x10x40x DDR-DRAM 512 MB NEC ZIP drive DVD drive PHILIPS TRUST AMI MOUSE Serial I 'm curieus how to solve this Thanks, André den Oudsten

1 0

Re: [SLE] Ldap info
by Clint Tinsley 23 Dec '05

23 Dec '05

I have posted quite a bit of information posted here: http://idahopcug.apcug.org/Linux/ldap.htm ----- Original Message ----- From: "ka1ifq" <ka1ifq(a)sbcglobal.net> To: suse-linux-e(a)suse.com Subject: [SLE] Ldap info Date: Fri, 23 Dec 2005 12:36:17 -0500 > > > Hello All: > > I am looking for a good tutorial for an LDAP beginner, or maybe even a good > beginner book. I have Googled and am still at it but decided to ask the list > also. > > TIA Mike > > -- > Check the headers for your unsubscription address > For additional commands send e-mail to suse-linux-e-help(a)suse.com > Also check the archives at http://lists.suse.com > Please read the FAQs: suse-linux-e-faq(a)suse.com

1 0

dell graphics i810
by steve 23 Dec '05

23 Dec '05

Hi I've googled around for ages but can't get a Dell 486 graphics to work. sax2 throws me back at the command line and startx. Yast didn't create X11/xorg.conf Any ideas? Thanks, Steve.

4 4

SUSE 10.0 KDE 3.5 supplemental update - missing rpms?
by Roger Oberholtzer 23 Dec '05

23 Dec '05

My SUSE 10 system has been in the middle of updating to kde 3.5 for a few days. Seems the media tags have been changing these past few days, breaking updates in progress. At this point, the update is looking for kdebase3-3.5.0-15.i386.rpm. I have refreshed the install sources, but the error persists. I do not see that in the yast sources when I peek around in ftp.suse.com://pub/suse/i386/supplementary/KDE/update_for_10.0 or any mirror. Has it gone missing? Am I blind? Until it is resolved, I will have a part 3.4 / part 3.5 install, which does not sound like a good idea. -- Roger Oberholtzer OPQ Systems AB

6 11

Re: [SLE] Installing PHP5 onto Apache (Suse 10.0)
by John Meyer 23 Dec '05

23 Dec '05

Lester Caine wrote: > John Meyer wrote: > >> Lester Caine wrote: >> >>> John Meyer wrote: >>> >>>> I downloaded it from the web site onto CDs. This computer doesn't >>>> have a DVD player. >>> >>> >>> If it's on the DVD then I would expect to find it on the CD's or on >>> the FTP site. I've just updated to 5.0.4 via the Yast update so it >>> must be round somewhere :( >>> >> Probably right, hey, do you know if when you do the online update, by >> default does it just give you security updates or does it give you >> all of the updates? > > > All the updates that are available, but some you may have to enable > yourself. 5.0.4 update was not a 'security' one, but was selected > Hold on, I see it, but it's blacked out (the check box,) for some reason Do I have to uninstall php4 and install php5?

5 17

Re: [Fwd: Re: [SLE] Fwd: [OT] Watch out for counterfeit eBay requests]
by Kai Ponte 23 Dec '05

23 Dec '05

> > >system. However, when I double-click on these files (they all seem to > > >end in .exe or .scr) KDE just asks what I want to do with the file. > > > > > >Something must be broken. > > Yeah, Windows. > > Those are windows applications, and I think the .scr denotes a screen > > saver. > There are a number of extensions that cause things to execute on Windows > such as .exe, .com, .scr, .bat, .vbs. Sorry to pollute the list with that comment. It seemed humorous at the time. Yes, .scr is another executable extension denoting a Win32 binary executable. Simply put most programmers just make the .scr extension to screen savers to Windows will put the file in the saver list. Other than that, they are exactly the same as the .exe files. The others listed all do similar things, though .com is an older 16-bit binary (Anyone remember edlin and debug?) and .bat/.vbs are scripting tools, similar to .sh When you get these in your spam email, they are designed for people running Windows as a local administrator who don't know any better. -- kai ponte www.perfectreign.com linux - genuine windows replacement part

2 1

help restore my gui?
by Steve Lett 23 Dec '05

23 Dec '05

Silly stuff... Trying to install a new video card and ran into a snag with the sound system dropping offline. ?? Still working on that issue when I had to go to the office today. While I was out the power dropped long enough that the system crashed. I think my shutdown software isn't working. But that and the video card business are other topics... I powered up a little while ago and it only gets to the text prompt, no more to the gui and I'm mostly lost at the command line. I've been poking around and trying to figure out what is hosed, but cannot. I know only a little bit and vi looks daunting. I must need to edit a config file, but ... which one? The messages I see on the screen just when it stops loading and hits the command prompts tells me what's wrong I think, just not what file to edit: Starting Sound Driver: emu10k1 done Restoring the previous Sound Setting: failed then Master Resource Control: Run Level 5 has been reached Failed Services in Runlevel 5: alsasound skipped services in runlevel 5: nfs smbfs I don't comprend the runlevel bit yet, but since I've acheived Runlevel 5, I should be able to get a gui but I don't know how to get there so.... 1. anyone know what file I need to edit to fix the problem with the sound? 2. can I get the bugger to a gui so I can use tools I know how to use instead of that god awful vi? I would probably corrupt the crap outta a config file trying to use that thing. Thanks for any help! Steve Registered Linux User #287453 ---------------------------------------- '87 Street Comanche #24/100 '92 Cherokee '88 Grand Wagoneer '87 Grand Wagoneer '81 Wagoneer ...and they say there's only one... --------------------------------------- -- _______________________________________________ Check out the latest SMS services @ http://www.linuxmail.org This allows you to send and receive SMS through your mailbox. Powered by Outblaze

3 3

file encryption in Linux
by Joe Burgess 23 Dec '05

23 Dec '05

Hello. I am looking for something like truecrypt. I want a program, that will have a encrypted file, and then mount that file as a virtual drive. Is this possible? If it isn't, I am just looking for a good file encrypter, that is easy too use. Thanks! -- --Joe Burgess RootSmart.com Administrator/Webmaster Skype: rootsmart Email: admin(a)rootsmart.com VoiceMail: (206)-202-ROOT(7668) http://www.rootsmart.com

4 3

kernel-of-the-day ?
by Per Jessen 23 Dec '05

23 Dec '05

This isn't exactly opensuse specific, but I got no reply on suse-linux-e, so I'm trying here instead: I've never used the SUSE kotd before, so bear with me - I seem to have a problem finding the kernel source RPMs. Am I looking in the right place: ftp://ftp.suse.com/pub/projects/kernel/kotd/10.0-i386/SL100_BRANCH/ I had expected to find a pile of RPMs with the vanilla kernel source and a stack of patches etc. /Per Jessen, Zürich

2 3

RPM removal problems
by sargon 23 Dec '05

23 Dec '05

I recently upgraded my MPlayer-athlon1 via Jan Engelhardt's APT repository. He had a problems with the RPMs from a couple of days ago, as those RPMs did not properly upgrade the RPM database (I was left with two different versions). After fighting this for half an hour (I ended up removing everything which needed MPlayer-athlon1, then removing MPlayer-athlon1, installing the older RPM, then re-installing all those apps), I thought I had a clean RPM database. However, after upgrading to the new version in his repository, I still have the older version in the database, meaning I now have two versions of MPlayer-athlon1, MPlayer-athlon1-1.0pre7try2-28 and MPlayer-athlon1-1.0pre7try2-29. When I try to remove the old one, I get this error: /var/tmp/rpm-tmp.24859: line 1: DEFINE_FLAVOR_DEL: command not found /var/tmp/rpm-tmp.24859: line 2: flavor_del: command not found error: %preun(MPlayer-athlon1-1.0pre7try2-28) scriptlet failed, exit status 127 I have rebuilt the RPM database numerous times, both before and after trying to remove MPlayer-athlon1-1.0pre7try2-28. Howe can I get a clean database, with only one version of MPlayer-athlon1, without completely rebuilding my laptop? All suggestions are greatlyappreciated. Thanks. Sargon

3 3

Strange behavior on connecting to DHCP network
by David McMillan 23 Dec '05

23 Dec '05

Hello, list. I've got another oddball one for the network gurus in the house. I've been able to work around it, so it's not a problem I need *help* with, but I would dearly like to understand what causes it. Here's the summary: I was working at a new job site, and was told that there was a WiFi network available to connect to the internet. Everyone around me was able to connect using XP and W2k laptops, with *no* special settings or software, but I couldn't send or receive any network traffic, even though my connection *looked* fine. After a few days of banging and rattling, I eventually borrowed an XP machine and did a complete cross-comparison the all the network settings received from the DHCP server. After that, I was able to manually change my SuSE 9.1 laptop setup and successfully connect to the internet through this WiFi gateway. Details: 1: Both my SuSE machine and the XP machine were connected to the same WiFi access point. ESSID and MAC IDs matched. Plus, there were *no* other WiFi networks active in the area -- I checked using XP and SuSE wireless tools. 2: Both machines received IP addresses, gateways, and nameserver settings from the DHCP server. 2a: However, these settings did not match: the XP machine was given a 10... IP, and a 10... gateway. My SuSE machine received addresses on a 192... IP subnet. DNS IPs also did not match. 3: When I was on the 192... subnet, I could ping 192...1 (I'm assuming this was the wireless router), and Ethereal picked up traffic, including DNS requests and other internet traffic on the 10... subnet. This was my first clue that something was not right with my received settings, since I could see local DNS traffic routing to nameserver IPs that did not match what the local DHCP server had put into my /etc/resolv.conf. Resolution: 1: ifconfig'd eth1 to a 10... IP that, judging from Ethereal's traffic pickup, was not occupied (I got lucky, here), and matched the subnet mask. 2: Edited /etc/resolv.conf and manually inserted the same DNS IPs that the XP machines were receiving. 3: Manually added the gateway using 'route add default gw 10...' Once I'd done that, everything worked fine. I had complete internet access, just like the Windows machines. I don't beleive that this was a WiFi related issue, since I didn't have to change any WiFi settings to correct for it. I suspect the root problem is somewhere in the local network setup 'above' the wireless router. What I can't understand is *why* the DHCP server treated my SuSE machine differently than all the Windoze machines. My first thought was that the XP/2k machines were using some special client-side software, but this turned out not to be the case. They were running on nothing but stock Windows Wireless Zero Configuration, using the same settings that they used to connect to public WiFi hotspots. There were no special settings or software involved. Related to this, I've just recently started having some trouble using certain public WiFi hotspots with my SuSE laptop -- hotspots that I've used a great deal in the past w/o any trouble. But in just the past two weeks, suddenly I'm not getting a default gateway set up when I connect to the network. I *do* get IP and DNS settings, but I have to add the gateway manually. And again, I've noticed that none of the other people around using Windows laptops are having any trouble. Other WiFi hotspots run by other providers, however, don't give me this trouble. It's all very puzzling.

2 1

Seagate buying Maxtor
by Greg Wallace 23 Dec '05

23 Dec '05

Maybe this is the wrong forum for this, but I just saw the news about this in the paper and thought it was interesting. Greg Wallace

2 1

Error on virusscanning
by Erik Jakobsen 23 Dec '05

23 Dec '05

Hi. I use the f-prot free virusscanner on mu SuSE 10.0 Eval version. There are some errors on the virusscanning. What could be the reason for that ?: Error on scanning /sys/class/scsi_host/host1/scan (access denied) Error on scanning /sys/class/scsi_host/host0/scan (access denied) Error on scanning /sys/bus/i2c/drivers/i2c_adapter/bind (access denied) Error on scanning /sys/bus/i2c/drivers/i2c_adapter/unbind (access denied) Error on scanning /sys/bus/usb/drivers/usb/bind (access denied) Error on scanning /sys/bus/usb/drivers/usb/unbind (access denied) -- Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the callsign OZ4KK http://www.urbakken.dk Registered Linux user #114875 with http://counter.li.org

7 10