September 2001 - openSUSE Users - openSUSE Mailing Lists

nvidia glx driver.
by Carlos 01 Sep '01

01 Sep '01

Hello, After installing the nvdia glx driver, all GL aplications that are run by users exit with a Segmentation Fault but they run perfectly run by root. Anyone knows why this might happen and how to solve it? Regards, Carlos.

2 1

Inital Runlevel problem
by Ray Booysen 01 Sep '01

01 Sep '01

I am running Suse 7.2. My problem is that as soon as the computer boots up (it was running for a week before it got booted again) it loads the kernel then goes into init 0 and shuts down. I can override this in lilo by booting with "linux init 3 " but what is the problem Thanks Ray Booysen

3 3

ssh authentication failure
by Cliff Sarginson 01 Sep '01

01 Sep '01

Hello I am trying to establish ssh on my network..with one suse linux system I have a problem. I have enabled rhosts authentication and from other non-Suse machine it all works fine. However here is the output from a ssh -v session. I have in the config file disable other authentication mechanisms, but they appear to be still tried ..?? Clues anyone thanks Cliff OpenSSH_2.9p1, SSH protocols 1.5/2.0, OpenSSL 0x0090601f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Seeding random number generator debug1: Rhosts Authentication disabled, originating port will not be trusted. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ debug1: restore_uid debug1: ssh_connect: getuid 500 geteuid 500 anon 1 debug1: Connecting to willow [192.168.1.1] port 22. debug1: temporarily_use_uid: 500/100 (e=500) debug1: restore_uid debug1: temporarily_use_uid: 500/100 (e=500) debug1: restore_uid debug1: Connection established. debug1: identity file /home/cliff/.ssh/identity type 0 debug1: identity file /home/cliff/.ssh/id_rsa type -1 debug1: identity file /home/cliff/.ssh/id_dsa type -1 debug1: Remote protocol version 1.99, remote software version OpenSSH_2.2.0 debug1: match: OpenSSH_2.2.0 pat ^OpenSSH[-_]2\.[012] Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_2.9p1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client 3des-cbc hmac-md5 none debug1: kex: client->server 3des-cbc hmac-md5 none debug1: dh_gen_key: priv key bits set: 202/384 debug1: bits set: 518/1024 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'willow' is known and matches the DSA host key. debug1: Found key in /home/cliff/.ssh/known_hosts2:1 debug1: bits set: 515/1024 debug1: len 55 datafellows 49296 debug1: ssh_dss_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: service_accept: ssh-userauth debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: authentications that can continue: publickey,password debug1: next auth method to try is publickey debug1: try privkey: /home/cliff/.ssh/id_rsa debug1: try privkey: /home/cliff/.ssh/id_dsa debug1: no more auth methods to try Permission denied (publickey,password). debug1: Calling cleanup 0x8064ea0(0x0)

1 0

Moving a w98 installation
by michael norman 01 Sep '01

01 Sep '01

Hi I have two hard drives, the better of which is the first (hda1). I dual boot w98 and SuSE 7.2. Because of the way that w98 insists on being on the first drive I have it installed as hda1 and SuSE on the rest of the first drive. At the moment I use the second (hdb) older slower drive as a spare mainly for backups and test installs. I want to put w98 on that drive and I understand that if I use grub rather than lilo I can then set grub to fool w98 into thinking that is on the first drive. Rather than going through another painful w98 install I'd like to just move the present w98 install to that drive. Is there a linux utility that I can use to do this ? That is create an image of the win98 install, move it to hdb1 and then set up grub to boot it so I can check that it works before I remove it from hda1 and reorganise that drive ? The w98 partition is about 4.0 gigs and the second drive is 6.4 gigs. Thanks for any pointers anyone can offer. Mike

9 12

Test
by Jerry Van Brimmer 01 Sep '01

01 Sep '01

Test, delete please.

5 11

Min. install of 7.2
by Vidor Demeter 01 Sep '01

01 Sep '01

Hi, Can anybody tell me what is the minimum install of SuSE 7.2? I want to d/l only the necessary files and after installation I would like to get the rest of installation by FTP. Is that possible? I have a ADSL line to the Internet. Thanks Vidor

2 1

KNetload
by Harrell, Tim 01 Sep '01

01 Sep '01

Whatever happened to the knetload app that was in KDE 1? It was quite nice being able to have it docked in the panel. Is there an equivalent in KDE 2-2? _________________________________________________________ Tim Harrell

2 1

RE: Re: [SLE] Min. install of 7.2
by vidord＠netscape.net 01 Sep '01

01 Sep '01

Martin Webster <mwebster(a)ntlworld.com> wrote: >On Friday 31 August 2001 10:43 pm, Vidor Demeter wrote: >> Can anybody tell me what is the minimum install of SuSE 7.2? >> I want to d/l only the necessary files and after installation >> I would like to get the rest of installation by FTP. >> Is that possible? >> I have a ADSL line to the Internet. > >You only need to get the bootdisk image (and utilities to create it) plus the >modules disk. Then, you should be able to install the rest via FTP. > >http://www.mirror.ac.uk/sites/ftp.suse.com/pub/suse/i386/7.2/disks/ or >similar mirror is best. > >M > Thanks, I'll try it vidor __________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/

3 2

Defeault kernel compile options SuSE 7.2 2.4.2-4gb
by BoeFranklin＠netscape.net 01 Sep '01

01 Sep '01

I have an IBM PC CAM pro and couldn't get it to work with the ibmcam module that came with 7.2 so I downloaded it from http://www.linux-usb.org/ibmcam/ to compile. I didn't know the parms for the kernel compile SuSE used, so I just let it rip. When I go to use the camera, the module sees it (unlike before) but blows up. I haven't found the kernel sources to try to compile something to see the flags used so I was wondering if anyone could tell me what the defaults SuSE used for 2.4.2-4gb? This is the error I get: Unable to handle kernel paging request at virtual address c88ea000 Thanks in advance... Boe -- My other computer is OS/390! __________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/

2 1

New problem with KDE 2.2 and koffice 1.1
by wolfi 01 Sep '01

01 Sep '01

Hi alltogether, I have a new problem with KDE 2.2 and koffice 1.1 Koffice 1.1rc1 imported .doc-files in KDE 2.1.2, then I upgraded to KDE 2.2 and koffice 1.1 final. In KDE 2.2 koffice 1.1 final does not import .doc files. I then decided to go back to koffice 1.1rc1, but in KDE 2.2 the release candidate does not import .doc files either. So it seems to be a problem between KDE 2.2 and koffice (??). Anybody got an idea ??? T.i.A. Wolfi ================================== mailto:wolfi_z@web.de

1 0