August 2021 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Bug in usb drivers? "Not enough bandwidth for new device state"
by Markus Egg 28 Feb '22

28 Feb '22

SuSE Tumbleweed with newest updates and upgrades. 5.7.1-1-default #1 SMP Wed Jun 10 11:53:46 UTC 2020 (6a549f6) x86_64 x86_64 x86_64 GNU/Linux Just recently started to give error messages when plugging in e.g. USB Headsets, Arduino Uno into some Exsys USB 3.0 hub. This was working fine in Tumbleweed before and in e.g. SuSE 13.1. The error message is e.g.: [...]usb 2-1.4.3: new full-speed USB device number 10 using xhci_hcd [...]usb 2-1.4.3: New USB device found, idVendor=2341, idProduct=0043, bcdDevice= 0.01 [...]usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [...]usb 2-1.4.3: Manufacturer: Arduino (www.arduino.cc) ...serialnumber... [...]kernel: usb 2-1.4.3: Not enough bandwidth for new device state. [...]kernel: usb 2-1.4.3: can't set config #1, error -28 This error message started on Jun 04, after making an update (zypper up) on June 3rd. A USB3.0 stick is working on the Exsys Hub. The Arduino is working on some other USB 3.0 Port of another hub. Regression? Any hints how to get this away? Found only another occurrence of this bug: http://opensuse92.rssing.com/chan-20813128/all_p1407.html Best regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

Audio problem Leap-15.3
by Mark Hounschell 09 Feb '22

09 Feb '22

On a machine I did a "zypper dup" to update from 15.2 to 15.3, the 15.3 does not have sound at bootup. Sound card is: # lspci | grep -i audio 16:00.4 Audio device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller The 15.2 works fine. 15.2: #dmesg | grep -i audio [ 0.502138] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 9.892740] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 9.894094] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 9.894980] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.895870] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.896760] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.897662] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 9.897662] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.897663] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 9.897664] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 9.897664] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 9.912613] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input4 [ 9.913543] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input5 [ 9.914476] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input6 [ 9.915416] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input7 [ 9.916344] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input8 On 15.3: #dmesg | grep -i audio [ 0.132048] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 5.112574] hdaudio hdaudioC0D0: Unable to bind the codec Yet when I go into Yast and reconfigure the card, the sound works until a reboot happens. What am I missing? Mark

13 116

How to connect via WiFi
by Wolfgang Mueller 22 Jan '22

22 Jan '22

My new computer is an HP 15s-eq2147 FHD RYZ5-5 16GB 512 SSD DOS It has no cable connection to the internet, but only access via WiFi. Installing Leap 15.3 was no problem, but so far I did not manage to establish a WiFi connection. Using Yast, I set up a wicked service with fixed address, getting this list: Device Name: wlan0 Configured with address 192.168.2.16/24 (acer.ariannuccia.zz) Starting automatically on cable connection I find it somewhat absurd that a cable connection is required even for WiFi. Since I have no cable connection, I am looking for a work around. Any idea? The "Authentication Mode" offers these 5 options: No Encryption WEP - Open WEP - Shared Key WPA-EAP ("enterprise") WPA-PSK ("home") On my router (192.168.2.1) there are these "Encryption type": Unencrypted (not recommended) WPA2 (very secure) WPA / WPA2 (secure) WPA (secure) For avoiding problems with the correspondence of these methods, I have selected "No Encryption" on my computer and "Unencrypted (not recommended)" on my router. But the connection does not work. Any attempt to ping the router from the new computer is rejected with the reply: connect: Network is unreachable Any help would be welcome. Thank you in advance and best regards, Wolfgang

10 42

smartctl
by mcgarrett 07 Dec '21

07 Dec '21

I have been beating my head against smartctl for over two hours now. I cannot seem to get the command "long" accepted, as the various tutorials explain. When I try to insert it, I get an error, like this: linux1:~ # smartctl long /dev/nvme0n1 smartctl 7.0 2019-05-21 r4917 [x86_64-linux-5.3.18-57-default] (SUSE RPM) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org ERROR: smartctl takes ONE device name as the final command-line argument. You have provided 2 device names: long /dev/nvme0n1 (It doesn't like "short" either.) And my typing is getting worse! It doesn't help that my drive is called /dev/nvme0n1. As I mentioned earlier, the lightning strike has damaged something in this, my main computer, and I'm trying to find out what. For those who missed the earlier post, the only thing I can connect to here is the internet. I cannot see the printers or the laptop machine, and nmap basically doesn't work. I started this quest at 11:30 PM and it's now 3:30 AM. I'm going to bed! --doug

5 10

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171) So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Problem with software raid and Tumbleweed
by Markus Egg 15 Sep '21

15 Sep '21

Hello, I got Tumbleweed Snapshot20210115 and wanted to install it on a rather old machine with a software raid1 (UEFI raid). On this raid some Windows 10 is already existing. The installer of Tumbleweed Snapshot20210115 does not recognize this software raid1. It only shows single harddiscs and no raid volume. An older snapshot 20190704 is able to see that software raid1 but I cannot do any zypper dup with that one (this version was running previously before some hardware crash). Any help for that - either a snapshot which can handle software raid1 or some way to set zypper dup running again with the older snapshot? BR and thanks in advance Markus

14 46

Sluggish Seamonkey
by James Knott 13 Sep '21

13 Sep '21

I use Seamonkey for email and I've noticed it's sometimes very sluggish when I press a key or move the mouse. It someties takes several seconds to respond. If I kill & restart it, it works OK for a while. Other apps don't seem to have the problem. Anyone else seen this? Running on Leap 15.3 & KDE tnx jk

6 18

access windows partition
by Douglas McGarrett 31 Aug '21

31 Aug '21

I used to be able to access the windows partition and read/write to it. I have a very new win 10 version-- OS build 19041.1165 with experience pack 120.2212.3530.0. I have turned off the hibernate, as far as I can tell, but I still cannot access Windows. What am I dong wrong, or has MS "fixed" it? --doug

9 27