November 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Spec'ing a 50 TB dedicated storage subsystem and room to grow?
by Greg Freemyer 22 Feb '19

22 Feb '19

All, I bought a used iSCSI based Drobo in 2016 with 50TB in it. It works great, but it isn't fast by today's standards. (100 MB/sec absolute max). And I never got it to work from openSUSE (Windows and Mac did work). I now need to buy something similar, but with fast I/O and Linux support: 10 Gbit Ethernet and fibre-channel may be my only options? Or are there point-to-point SAS external racks I should consider? Also, I will likely want to put a SSD based cache in the mix at some point. It could be integrated into the storage subsystem, or I could use something like bcache and have the SSD be in the server,. It just needs to be reliable and fast. Recommendations? (I'm thinking used and $10K at the high-end for the subsystem including PCIx cards and switches, if needed.) == details I need to buy a server with 50TB usable disk for a production environment. A high speed disk subsystem is critical. And the project may scale up over time. It doesn't need to be a fail-over cluster, just a single server. I'm looking at used equipment most likely. I was thinking one with 4 CPU sockets would let me start with 2 CPUs and then expand to 4 later on. Lots of RAM capacity would also be great. My first thought was to get a Dell R920 and throw a bunch of disks in it. https://goo.gl/images/x3Rfj2 24 disk slots! But then I looked at what size drives are available for those slots: 2.5 inch. I only see 2TB drives max. I'm hoping to use a Dell server because it's the preferred brand at my (new) job. Unless I'm missing something a standalone rack mount Dell won't work. So, now I'm looking at a used R820 most likely and some sort of disk subsystem to support it. I picked it because it is only a 5-year old design and it has 4 CPU sockets I can expand into as the server demand increases over time. Also 3TB max ram is way above what this will require, even long term. https://media.adn.de/media/DE/DocLib/Poweredge_Easy_Matrix.pdf A used, barebones R820 can be had for under $2K. Just add CPUs and ram. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 41

[opensuse] Leap 15.0 won't boot on a Lenovo T420
by 712＠vivaldi.net 07 Dec '18

07 Dec '18

Hello, I've installed Leap 15.0 on a Lenovo T420 laptop twice, and both attempts resulted in a non-bootable system. During the first installation, I used the Suggested Partitioning option (no other OS on the HD). The installation completed without any warning/error messages. After the restart, the system was stuck and showed exactly the screen shown in the first 8 seconds of this video (not mine and advance apologies for the music): https://www.youtube.com/watch?v=zfr6OldZGVM Using Hiren's rescue cd, I was able to boot the system from the cd, then start Leap 15.0 from HDD0. I saw a short notice that GRUB2 was starting (never saw that when booting from the HDD), then Leap 15.0 was starting, and I could log in. Leap 15.0 appeared to be running fine from the HDD. Then I wiped the HDD, and reinstalled Leap 15.0 with the Guided Setup. I noticed a GPT entry in the proposed partitioning scheme, but I didn't touch that and didn't change anything else. Installation completed OK. After the restart it was stuck again just like in the video. At both attempts, I've changed the boot order and disabled network boot in the BIOS to no avail. I've tried *every* available boot option in the BIOS to no avail, including UEFI / Legacy Boot etc. This laptop has been running Leap 42.3 for months with none of above issues. Because I need a running OS on this laptop, I now installed Linux Mint, and it boots fine from the HDD. Just thought I'd bring this to your attention. Regards, Fritz -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 19

[opensuse] Q: MySQL 5.6 for Leap 15.0 [CORRECTED]
by Andrei Verovski 03 Dec '18

03 Dec '18

Hi ! *** Sorry, made a mistake in previous post, 5.6 version. *** For accounting system we need old MySQL 5.6, and NOT newer. Is it available anywhere in repositories (may be private) for Leap 15 ? I looked here, and through software search, not found anything. http://download.opensuse.org/repositories/server:/database/openSUSE_Leap_15… mysql-community-server RPMs here built for very old SLES 11 and can't be installed on leap 15 due to missing library dependencies. https://dev.mysql.com/downloads/file/?id=468312 Thanks in advance Andrei -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] nfsroot with Leap?
by Daniel Spannbauer 03 Dec '18

03 Dec '18

Hello, Did anyone configure a system to use a nfs root? If yes, how? I tried to build a initrd for nfsroot with dracut, but it alwys searches for a local root device at startup. Regards Daniel -- Daniel Spannbauer Systemadministration marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4-6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] 42.3: KDE on-screen clock 2 hours off
by Mikhail Ramendik 02 Dec '18

02 Dec '18

Hello, I have an OpenSUSE 42.3 system. now fully updated with zypper up. Network time sync is enabled. The timezone is Dublin. which should be GMT. If I open a Konsole window and run "date", I get the correct time (now 13:50 GMT) But the clock in the system tray is off by 2 hours, showing 11:50! I have right-clicked the clock and selected "Digital Clock Settings" and the timezone is correct, Dublin. I tried adding a Moscow rime zone, now on mouseover I get "GMT 11:50 MSK 14:50", even though actually it's GMT 13:50 MSK 16:50 - and the GMT in the command line is correct! How can I fix this? Thanks! -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 16

[opensuse] How to make your Linux machines visible to other Linux machines - TechRepublic
by James Knott 02 Dec '18

02 Dec '18

I recently came across this article. How does it affect OpenSUSE? I couldn't find that pack name in Yast. https://www.techrepublic.com/article/how-to-make-your-linux-machines-visibl… -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Copying a home dir from one PC to another
by Liam Proven 01 Dec '18

01 Dec '18

I have a new desktop. \o/ I want to copy my home directory -- all of it -- from my old one to my new one. They're on the same LAN. I do not have write access to a local fileserver, though. So what's the best way? I don't really want to do it over ssh, because there's no need for encryption -- it's pointless overhead. Old machine runs Tumbleweed. New one has Tumbleweed, Leap 15 and Win10. Neither is a server for anything at all. -- Liam Proven - Technical Writer, SUSE Linux s.r.o. Corso II, Křižíkova 148/34, 186-00 Praha 8 - Karlín, Czechia Email: lproven(a)suse.com - Office telephone: +420 284 241 084 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 43

[opensuse] Trying to adjust the swapiness of clamd
by Carlos E. R. 30 Nov '18

30 Nov '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm trying to force the clamd process to swap agresively, because by default it eats 500 MB of my limited memory even when it is doing nothing but waiting. Sorting process list in "top" by "RES" column shows that clamd is the 5th process using most memory in my system: top - 14:21:12 up 7 days, 14 min, 1 user, load average: 0,60, 0,70, 0,74 Tasks: 532 total, 2 running, 529 sleeping, 0 stopped, 1 zombie %Cpu(s): 5,8 us, 1,6 sy, 0,0 ni, 91,0 id, 1,7 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 8174528 total, 7765124 used, 409404 free, 24892 buffers KiB Swap: 25165820 total, 5177256 used, 19988564 free. 1970388 cached Mem PID USER PR NI VIRT RES SHR SWAP S %CPU %MEM TIME+ COMMAND 7098 cer 20 0 4249152 1,415g 61572 392760 S 0,000 18,15 295:54.17 thunderbird-bin 7494 cer 20 0 3040184 839476 51296 256248 S 0,330 10,27 155:16.49 Web Content 7341 cer 20 0 2858436 746840 41012 202296 S 3,300 9,136 74:35.03 Web Content 5221 cer 20 0 10,139g 740952 137364 464756 S 1,650 9,064 134:50.52 firefox 12020 vscan 20 0 711128 552372 1660 0 S 0,000 6,757 0:00.00 clamd ... Apparently this is done with cgroups, about which I know close to nothing. First I see: <https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/ht…> but I do not understand how to make use of it, except that I want to change memory.swappiness of the process. But I do not see where is that virtual file for the clamd process, if it exists. The examples there do things like: ~]# echo 1G > /cgroup/memory/lab1/memory.limit_in_bytes but they have a "lab1" entry for the particular process they are managing. I don't know how that entry appears. This is what I have: Telcontar:~ # ls /sys/fs/cgroup/memory/ cgroup.clone_children cgroup.sane_behavior memory.limit_in_bytes memory.move_charge_at_immigrate memory.pressure_level memory.swappiness notify_on_release cgroup.event_control memory.failcnt memory.low_limit_in_bytes memory.numa_stat memory.soft_limit_in_bytes memory.usage_in_bytes release_agent cgroup.procs memory.force_empty memory.max_usage_in_bytes memory.oom_control memory.stat memory.use_hierarchy tasks Telcontar:~ # So I continue googling. Aparently systemd can control cgroups. On systemd documentation site, <http://0pointer.de/blog/projects/resources.html>, I see that cgroup settings can be set on the systemd unit file. systemd for Administrators, Part XVIII Managing Resources ... Managing Other Resource Parameters which gives the exact example I want to try: [Service] ControlGroupAttribute=memory.swappiness 70 Fantastic! So I create "/etc/systemd/system/clamd.service.d/override.conf" file: [Service] ControlGroupAttribute=memory.swappiness 100 And try: Telcontar:~ # systemctl daemon-reload Telcontar:~ # systemctl status clamd.service ● clamd.service - Clamav antivirus Deamon Loaded: loaded (/usr/lib/systemd/system/clamd.service; disabled; vendor preset: disabled) Drop-In: /etc/systemd/system/clamd.service.d └─override.conf Active: active (running) since Mon 2018-10-15 14:07:56 CEST; 1min 2s ago Main PID: 12020 (clamd) Tasks: 2 (limit: 512) CGroup: /system.slice/clamd.service └─12020 /usr/sbin/clamd Oct 15 14:07:55 Telcontar clamd[12020]: Mail files support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: OLE2 support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: PDF support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: SWF support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: HTML support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: XMLDOCS support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: HWP3 support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: Self checking every 3600 seconds. Oct 15 14:07:56 Telcontar systemd[1]: Started Clamav antivirus Deamon. Oct 15 14:08:49 Telcontar systemd[1]: [/etc/systemd/system/clamd.service.d/override.conf:2] Unknown lvalue 'ControlGroupAttribute' in section 'Service' Telcontar:~ # What? The lvalue is copied from the documentation! How can I then do it? - -- Cheers Carlos E. R. (from 42.3 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlvEiR4ACgkQtTMYHG2NR9XivACdGYCwgSru7a07vrXoejO/VP3A zXAAnjnb3Alv/2OxyH9Yit2rdBca2J0H =ZRmA -----END PGP SIGNATURE-----

3 8

[opensuse] with the system kernel a lot of noise with wlan. With the kernel stable not. What could be the cause?
by stakanov 30 Nov '18

30 Nov '18

I am getting following errors (but only if I do use the system kernel, not with kernel stable - which I cannot use at the time for precaution because I am using EXT4. [ 161.024433] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 161.267921] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 161.365341] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 164.574845] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 164.820236] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 164.917233] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 182.261799] wlan1: authenticate with 00:0b:3b:d1:30:4f [ 182.307554] wlan1: send auth to 00:0b:3b:d1:30:4f (try 1/3) [ 182.310068] wlan1: authenticated [ 182.311690] wlan1: associate with 00:0b:3b:d1:30:4f (try 1/3) [ 182.315551] wlan1: RX AssocResp from 00:0b:3b:d1:30:4f (capab=0x431 status=0 aid=1) [ 182.322833] wlan1: associated [ 182.322890] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 185.182991] fuse init (API version 7.26) [ 197.863584] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=216.58.205.227 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=26162 PROTO=TCP SPT=443 DPT=59146 WINDOW=0 RES=0x00 RST URGP=0 [ 197.866873] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=216.58.205.227 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=26166 PROTO=TCP SPT=443 DPT=59146 WINDOW=0 RES=0x00 RST URGP=0 [ 226.552113] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=172.217.23.174 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=33933 PROTO=TCP SPT=443 DPT=57620 WINDOW=0 RES=0x00 RST URGP=0 [ 226.570121] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=172.217.23.174 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=33948 PROTO=TCP SPT=443 DPT=57620 WINDOW=0 RES=0x00 RST URGP=0 [ 239.107772] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 240.934644] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=159.122.87.153 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=14876 DF PROTO=TCP SPT=443 DPT=36474 WINDOW=0 RES=0x00 RST URGP=0 [ 240.943036] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=159.122.87.153 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=14878 DF PROTO=TCP SPT=443 DPT=36474 WINDOW=0 RES=0x00 RST URGP=0 [ 364.107361] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 371.311723] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=52.22.196.254 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=234 ID=15597 DF PROTO=TCP SPT=443 DPT=51308 WINDOW=0 RES=0x00 RST URGP=0 [ 379.223441] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.183 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=11299 DF PROTO=TCP SPT=443 DPT=34470 WINDOW=0 RES=0x00 RST URGP=0 [ 379.412010] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=188.121.36.239 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=117 ID=19790 DF PROTO=TCP SPT=80 DPT=49338 WINDOW=0 RES=0x00 RST URGP=0 [ 379.449340] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.183 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=11435 DF PROTO=TCP SPT=443 DPT=34466 WINDOW=0 RES=0x00 RST URGP=0 [ 382.615402] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=188.121.36.239 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=117 ID=19790 DF PROTO=TCP SPT=80 DPT=49346 WINDOW=0 RES=0x00 RST URGP=0 [ 385.782100] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=188.121.36.239 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=117 ID=19790 DF PROTO=TCP SPT=80 DPT=49348 WINDOW=0 RES=0x00 RST URGP=0 [ 390.640599] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.173 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=59801 DF PROTO=TCP SPT=443 DPT=33688 WINDOW=0 RES=0x00 RST URGP=0 [ 390.797843] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.173 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=59810 DF PROTO=TCP SPT=443 DPT=33688 WINDOW=0 RES=0x00 RST URGP=0 [ 393.648659] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=64.30.230.22 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=12579 DF PROTO=TCP SPT=443 DPT=40082 WINDOW=9300 RES=0x00 ACK RST URGP=0 [ 394.389016] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.220 DST=192.168.50.37 LEN=40 TOS=0x08 PREC=0x00 TTL=54 ID=39750 DF PROTO=TCP SPT=443 DPT=51920 WINDOW=0 RES=0x00 RST URGP=0 [ 394.398024] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.220 DST=192.168.50.37 LEN=40 TOS=0x08 PREC=0x00 TTL=54 ID=39751 DF PROTO=TCP SPT=443 DPT=51920 WINDOW=0 RES=0x00 RST URGP=0 [ 394.877650] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=152.195.15.114 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=49852 DF PROTO=TCP SPT=443 DPT=40200 WINDOW=0 RES=0x00 RST URGP=0 [ 394.943567] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=216.58.205.234 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=62468 PROTO=TCP SPT=443 DPT=45320 WINDOW=0 RES=0x00 RST URGP=0 [ 397.147595] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=4364 DF PROTO=TCP SPT=443 DPT=33880 WINDOW=0 RES=0x00 RST URGP=0 [ 397.152185] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=4365 DF PROTO=TCP SPT=443 DPT=33880 WINDOW=0 RES=0x00 RST URGP=0 [ 397.157498] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=56299 DF PROTO=TCP SPT=443 DPT=33882 WINDOW=0 RES=0x00 RST URGP=0 [ 397.161730] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=56300 DF PROTO=TCP SPT=443 DPT=33882 WINDOW=0 RES=0x00 RST URGP=0 [ 397.210861] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=34.199.18.114 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=236 ID=38193 DF PROTO=TCP SPT=443 DPT=59810 WINDOW=0 RES=0x00 RST URGP=0 [ 397.263189] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=42212 DF PROTO=TCP SPT=443 DPT=33878 WINDOW=0 RES=0x00 RST URGP=0 [ 397.267533] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=42213 DF PROTO=TCP SPT=443 DPT=33878 WINDOW=0 RES=0x00 RST URGP=0 [ 397.317183] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=34.199.18.114 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=234 ID=38217 DF PROTO=TCP SPT=443 DPT=59804 WINDOW=0 RES=0x00 RST URGP=0 [ 476.462472] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=27566 DF PROTO=TCP SPT=443 DPT=33876 WINDOW=0 RES=0x00 RST URGP=0 [ 489.106950] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 614.106412] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 739.106042] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Which protocol is causing the noise? And is anybody able to understand what that is, seems to be a kind of search or a failed handling of some protocol? How can I switch it off? Thank you. PS. I am suffering from a privoxy problem that I try to debug. Could this be related? (Privoxy listens but traffic is nor resolved via privoxy). _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Q: MySQL 5.7 for Leap 15.0
by Andrei Verovski 29 Nov '18

29 Nov '18

Hi ! For accounting system we need old MySQL 5.7, and NOT newer. Is it available anywhere in repositories (may be private) for Leap 15 ? I looked here, and through software search, not found anything. http://download.opensuse.org/repositories/server:/database/openSUSE_Leap_15… mysql-community-server RPMs here built for very old SLES 11 and can't be installed on leap 15 due to missing library dependencies. https://dev.mysql.com/downloads/file/?id=468312 Thanks in advance Andrei -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0