January 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] IPv6 Rogue Router Security Issue
by Lew Wolfgang 30 Dec '17

30 Dec '17

Hi Folks, There seems to be a flurry of IPv6 talk going on, maybe this is time for me to bring up the rogue router problem again? I asked about this a couple of times over the years but could never find anyone to comment on it. First, here's the RFC that describes the problem: https://tools.ietf.org/html/rfc6104 Rogue routers have affected me personally at a customer's site. This is a large, professionally managed, dual-stacked network with a number of v4 class B addresses and thousands of hosts. Subnets seem to be /20 CIDR in size, so there are plenty of "neighbors" on any given subnet. I've encountered the situation where misconfigured Windows systems will advertise themselves as an IPv6 router. They then happily accept traffic and drop it all silently on the floor. This problem doesn't seem to bother other Windows boxes too much, but it absolutely kills SSH connections. SSH preferentially tries IPv6 port 22, which when sent to a dumb Windows box results in very long hangups and connection failures. My workaround for my cohort of Linux desktops and servers was to disable IPv6 for both ssh and sshd. This will work for as long as the host network supports dual stacks, but eventually? Then there's the issue of intentional MITM attacks using this vector. If a bad actor has physical access to a subnet, or has compromised a host on that subnet, your goose is cooked. This link mentions some mitigations, but they're quite technical and may require hardware support. https://community.infoblox.com/t5/IPv6-Center-of-Excellence/Holding-IPv6-Ne… So, what is the threat to a home IPv6 user who has WiFi and an Internet of Things with minimal/non-existent security? I personally feel safer behind a nice natted IPv4 firewall with ACL rules between my copper and WiFi subnets. I just feel that I have more control of the situation with a simpler network. Has SUSE addressed this issue? Tell me I don't have to worry about it! Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 67

[opensuse] Again, trying to find a suitable video editor.
by Carlos E. R. 02 Dec '17

02 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I simply can't find a suitable video editor that works. My goal is to extract the interesting parts of a TV recording. Ie, mark the start of the movie, the end, the commercials inside, and dump all that into a single file, perhaps recoding. One limitation is that movies here have two sound tracks, one in Spanish, and the other one in the original language, typically English. I want to keep both, obviously. I don't need any transition or effect, just a simple editor that allows me to remove unwanted sections. I have tried: pitivi - crashes on start LiVES - works for an hour at 100% CPU and can't load the file. dvbcut - says my mpeg file is not a video (and it certainly is!) tragtor - can convert, but not edit. openshot - almost. My video has two sound tracks, and this tool ignores the second track. cinelerra-cv - I can't make head or tails of it. I tell it to load a video file, it does, but then I don't see how to do anything. It doesn't even display the video. I may have to read the manual, but I dislike having to read a manual for a GUI. Still... kdenlive - Well... crashes too often. I can mark the cuts, but it does not display what I'm cutting. And only one sound track. HandBrake - no edit. Avidemux - one sound track only. Kino - abandonware. Lightworks ?? Shotcut - Segmentation fault on start. cer@Telcontar:~/Videos/Fusion/trabajo> shotcut QSqlDatabase: QSQLITE driver not loaded QSqlDatabase: available drivers: QMYSQL QMYSQL3 QSqlQuery::exec: database not open QSqlQuery::exec: database not open Database::Database(QObject*) Failed to get version. QSqlQuery::exec: database not open bool Database::upgradeVersion1() Failed to create thumbnails table. Database version is 0 Segmentation fault cer@Telcontar:~/Videos/Fusion/trabajo> Flowblade ?? I don't understand the tool. May need some reading. At least it runs. I would like something that would produce a command line to ffmpeg in a GUI. Then I could modify further the options. This would be ideal. tragtor works this way, but has no editor. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlbbJ80ACgkQtTMYHG2NR9UmagCeK8UbAAz5/lAjBvscdhzBuxtb WUQAn2jmzoy7810hldN4WwVWQktgVp2g =muqW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

28 199

[opensuse] Digikam, etc. cannot upload from iPhone 6S
by Dennis Gallien 21 May '17

21 May '17

Not sure if this is a KDE or Solid (or other) issue . . . sorry for message length but trying to include all relevant data I know of . . . Digikam has worked great importing/deleting photos from iPhone 6S for a year, working on 13.2. I recently upgraded 13.2 => 42.1 => 42.2 about a month ago. I can't honestly say whether this problem arose with the Leap upgrade, or with an update since. When Digikam opens it displays the following error message: The specified camera ("/org/kde/solid/udev/sys/devices/ pci0000:00/0000:00:12.2/usb1/1-1/1-1:4.2/net/eth2") is not supported. ~>lsusb shows the camera as: Bus 001 Device 002: ID 05ac:12a8 Apple, Inc. Switching to a different port , , , ~>lsusb Bus 004 Device 003: ID 05ac:12a8 Apple, Inc. Digikam then throws this error when started: The specified camera ("/org/kde/solid/udev/sys/devices/ pci0000:00/0000:00:13.2/usb4/4-2/4-2:4.2/net/eth1") is not supported. Yet still Digikam (and other photo apps) autodetects the phone. It is shown under the Import menu, and when Import for the phone is selected the second Digikam windows opens. At bottom it shows the correct camera media capacity and amount used, while under the Device menu it shows the phone is recognized on the correct usb port. It shows that upload and delete are supported functions. But it cannot see the photo files. (It is seen as an "iPhone5 (PTP mode)"; gphoto2 --list-cameras does not show iPhone6 but that was not a problem before; the udev hwdb shows the same phone ID for both iPhone5 and iPhone6. Tested this with my wife's iPhone 5 and the errors were the same.) gphoto2: --list-ports sees the correct port --list-folders sees the "store_feedface" folder but no files. --abilities shows iPhone 5 with USB support, file preview and upload = yes When I try kio camera:/ in Dolphin I get: camera:/Apple%2520iPhone%25205%2520(PTP%2520mode)@usb:001,002/ An "Apple iPhone 5 (PTP Model)" folder appears with the sub-folder "store_feedface" but no DCIM folder nor any photos. When I try gtkam it can see the iPhone "store-feedface" but not DCIM, no files. Experimenting with this app I once got this error, too: An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Device or resource busy). Make sure no other program (gvfs-gphoto2-volume-monitor) or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. Similarly, when I tried Shotwell it threw: Unable to fetch previews from the camera: Could not claim the USB device (-53) But strangely, darktable uploads (and deletes) the iPhone files even though it uses libgphoto2.so.6 just as all the other apps do. Still works fine with my Canon A570. Digikam Version 5.4.0 Using: KDE Frameworks 5.26.0 Qt 5.6.1 (built against 5.6.1) My suspicion is that the problem is connect to the error "could not claim USB device", as I've seen that several times. Just a wild-ass guess. I checked Bugzilla KDE and Solid, found multiple instances of PTP cameras being recognized but files not retrievable over the last ~5 years. But nothing recent. I did find a 2011 bug report on Ubuntu Launchpad which was reported again in Dec claiming a regression in Digikam, but it wasn't verified. (And that was Digikam4, not 5). Any suggestions where to look further? Again, apologies for length. TIA, Dennis P.S. KDE folks might want to note that the Device Notifier entry always displays the camera twice rather than just once when it's attached, and when the "Open with File Manager" option is chosen, the app errors on not finding the KDE4 version of Dolphin: KDEInit could not launch 'dolphin4': Could not open library 'libkdeinit5_dolphin4'. Cannot load library libkdeinit5_dolphin4: (libkdeinit5_dolphin4: cannot open shared object file: No such file or directory) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 18

[opensuse] leap42.1 - how do I get the hostname displayed on the GUI login/lock screen?
by Per Jessen 17 Mar '17

17 Mar '17

$SUBJ says it all - I'm missing the hostname. When several PC are connected via a kvm switch it's handy being able to tell where you are logging in. -- Per Jessen, Zürich (4.6°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 42

[opensuse] HP printer Leap 42.2
by michael norman 01 Mar '17

01 Mar '17

My HP D2300 usb printer has worked for many years. It is attached to one of my two pcs and shared between the two. This worked fine up to 13.2 but I cannot get 42.2 to share the printer. Sharing fails in Yast whereas it worked up to 13.2, when I try to sahre it using the CUPS interface I am not offered adminstrator settings (I always used my root password for this hitherto) so cannot change the settings to share the printer. All of this works on Linux Mint 18.1 fwiw. Is there a known fix for this ? M -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 35

[opensuse] Steam Fails to Launch
by Bryon Adams 20 Feb '17

20 Feb '17

Hello, Having trouble launching Steam after an update the other day. The "Verifying Install" window pops up right after I click the icon and promptly closes with no error. Running from a terminal produces the following: removing troublesome steam-runtime libs... bringing in our fixed openssl libraries Running Steam on opensuse 42.2 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1484790260) Installing breakpad exception handler for appid(steam)/version(1484790260) Installing breakpad exception handler for appid(steam)/version(1484790260) assert_20170130180735_1.dmp[4436]: Uploading dump (out-of-process) /tmp/dumps/assert_20170130180735_1.dmp /home/bryon/.local/share/Steam/steam.sh: line 727: 4431 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$STEAMEXEPATH" "$@" assert_20170130180735_1.dmp[4436]: Finished uploading minidump (out-of- process): success = yes assert_20170130180735_1.dmp[4436]: response: CrashID=bp-1596a999-fa5d- 40e3-81e7-034f62170130 assert_20170130180735_1.dmp[4436]: file ''/tmp/dumps/assert_20170130180735_1.dmp'', upload yes: ''CrashID=bp- 1596a999-fa5d-40e3-81e7-034f62170130'' List of packages that were updated the other day: gnome-control-center gnome-control-center-user-faces grub2 gstreamer-plugins-base kmod libkmod2 polkit-gnome xf86-video-intel yast2 gnome-shell gnome-control-center-lang gnome-control-center-goa gnome-control-center-color grub2-i386-pc libgstvideo-1_0-0 kmod-compat polkit-gnome-lang yast2-storage gnome-shell-lang gnome-shell-extensions-common gnome-shell-devel gnome-shell-classic gnome-shell-calendar gnome-shell-browser-plugin grub2-x86_64-efi typelib-1_0-GstVideo-1_0 libgsttag-1_0-0 yast2-network gnome-shell-extensions-common-lang grub2-systemd-sleep-plugin grub2-snapper-plugin libgstaudio-1_0-0 libgstpbutils-1_0-0 libgstapp-1_0-0 libgstriff-1_0-0 typelib-1_0-GstTag-1_0 libgstrtsp-1_0-0 libgstrtp-1_0-0 libgstfft-1_0-0 libgstallocators-1_0-0 gstreamer-plugins-base-lang typelib-1_0-GstAudio-1_0 libgstsdp-1_0-0 typelib-1_0-GstPbutils-1_0 libxmmsclient6 k3b conky k3b-codecs Not sure where to start trying to fix this to be honest. I did do a 'zypper in -f steam' to try reinstalling Steam but I still get the errors. Running on Leap 42.2, no updates are available when I check. -- Regards, Bryon Adams -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 13

[opensuse] fyi only - out of memory with 128GB of RAM!
by Greg Freemyer 20 Feb '17

20 Feb '17

All, I just thought this was worth sharing. I've got the 128GB RAM PC I built up last spring (much discussion on this list). I don't have a swap space setup because who could ever use that much RAM. The OOM background tool just kicked in and killed one of my tasks! Top agrees and says I only have 10GB of RAM free (after killing my task). Setting up swap space now! Greg -- Greg Freemyer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 36

[opensuse] How to grep a save command in order to save the complete output of hwinfo to a txt file?
by stakanov 10 Feb '17

10 Feb '17

I have to put the complete hwinfo from the cli to a txt outputfile. I recall I can do this somehow with grep, but all the web resources speak about long scripts. Notwithstanding, I recall, a very simple command can do this. If somebody is knowledgeable I would appreciate. Seasonal greetings. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 9

[opensuse] systemd hibernate dirs
by Carlos E. R. 09 Feb '17

09 Feb '17

Hi, I see scripts in "/usr/lib/systemd/system-sleep/". What would be the right place to add my own scripts? A pointer to reading about them? -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)

6 30