March 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] backporting OBS build of Base:System(systemd v = 228) to Leap; builds, but rpm install returns "Problem: nothing provides this-is-only-for-build-envs needed by systemd" ?
by PGNet Dev 02 Mar '16

02 Mar '16

I want to use systemd-boot for UEFI boot on openSUSE Leap 42.1. Leap's systemd is at v = systemd-210-86.1.x86_64. systemd-boot available for v >= 220. Base:System provides build for latest systemd, v = 228. I'm attempting to build @OBS for Leap, using those sources. I've managed to build 'successfully' -- at least no errors reported -- here: https://build.opensuse.org/package/show/home:pgnd:Base:System/systemd When I attempt to install locally from that repo, zypper up systemd Loading repository data... Reading installed packages... Resolving package dependencies... Problem: nothing provides this-is-only-for-build-envs needed by systemd-228-14.1.x86_64 Solution 1: do not install systemd-228-14.1.x86_64 Solution 2: break systemd-228-14.1.x86_64 by ignoring some of its dependencies The prjconf https://build.opensuse.org/project/prjconf/home:pgnd:Base:System contains Ignore: systemd-mini:this-is-only-for-build-envs Ignore: libsystemd0-mini:this-is-only-for-build-envs Ignore: udev-mini:this-is-only-for-build-envs Ignore: libudev-mini1:this-is-only-for-build-envs which was necessary/sufficient to eliminate build-time errors @OBS. What additional, or fixed, config is necessary to get past this uninstallable dep? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] touchpad on asus laptop not recognized
by Daniel Bauer 02 Mar '16

02 Mar '16

Hi, The touchpad on my Asus GL552VW-CN113T is not recognized by leap. hwinfo --mouse only sees the USB mouse I have attached per cable, but not the touchpad: 32: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: MtLc.n6HbfhE0Bn4 Parent ID: k4bc.2DFUsyrieMD SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0 SysFS BusID: 1-6:1.0 Hardware Class: mouse Model: "Logitech M-BJ58/M-BJ69 Optical Wheel Mouse" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc00e "M-BJ58/M-BJ69 Optical Wheel Mouse" Revision: "11.10" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Speed: 1.5 Mbps Module Alias: "usb:v046DpC00Ed1110dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (Hub) when I unplug the USB mouse, hwinfo --mouse gives no output at all. gsynaptics and xf86-input-synaptics are installed... Any hints? Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com room in Barcelona: https://www.airbnb.es/rooms/2416137 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Organizing Team Meeting 4 Notes
by ddemaio 02 Mar '16

02 Mar '16

Hi all, Here is the update from our Organizing Team Meeting from March 1. The take away from this week's meeting is: 1. The Program Committee has selected the Theme for oSC16: openSUSE & You<http://bit.ly/1QxzN2H> 2. Currently there are 39 registered attendees with 29 proposal submission - Submit your proposal at http://bit.ly/1o1Nn7I 3. The poll released last week (http://svy.mk/21w9pS9) will close on March 15. Make your vote count. v/r Doug Week 3 note - http://community.opensuse.org/meetings/opensuse-project/2016/opensuse-proje… Week 3 note -http://community.opensuse.org/meetings/opensuse-project/2016/opensuse-project.2016-02-23-17.00.html Week 2 notes -http://community.opensuse.org/meetings/opensuse-project/2016/opensuse-project.2016-02-16-17.00.html Week 1 notes -http://community.opensuse.org/meetings/opensuse-project/2016/opensuse-project.2016-02-02-16.59.html

1 0

[opensuse] switching console without Alt key :-(
by jdd 02 Mar '16

02 Mar '16

Hello I have a small keyboard that do not have any Alt key, do you know an other way to switch terminal in init 3 mode (no X)? thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 28

[opensuse] which spreadsheet program to choose?
by Felix Miata 02 Mar '16

02 Mar '16

I'm using 42.1 with KDE3 as primary OS and DE, with 13.1, 13.2, TW, Mageia, Fedora and more, with Plasma5, KDE4 and TDE, available on other machines. I've been using OS/2 to run Quatro Pro for DOS for over 20 years, but I needed a bit more flexibility for a bug hunt project, more columns on screen at once than a DOS app can manage. I tried KSpread (kde3-koffice-spreadsheet), which just cost me 5 day's work as explained on the opensuse-kde3 list on 2016-02-29 04:01 (UTC-0500). (Archiving seems to be broken at least for -kde3 if not others) I tried installing LibreOffice, but it was unusable, ignoring the DE's DPI, resulting in insanely tiny text in both UI and content, and icons worse than uselessly small. I tried Apache's OpenOffice, but it crashes on startup: https://lists.opensuse.org/opensuse/2016-02/msg01431.html Cloud SS apps like Google's are not an option. The only others I recognize as spreadsheets in YaST are Calligra (KDE?), and Gnumeric (Gnome). Anyone have a spreadsheet to recommend? Maybe I should stick with KOffice, just with other file formats than .sxc? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 19

[opensuse] rtl-8732BS
by jdd 02 Mar '16

02 Mar '16

Hello, any chance to have the wifi card rtl-8732BS work with Leap? right now it's not even seen by the kernel thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] Xmodmap is invalid when resume standby mode
by Billy.Zheng 02 Mar '16

02 Mar '16

I use opensuse 42.1 Gnome3 version. When I leave my laptop some minute, and back again, My Xmodmap settings (swap CapsLock and Control) and laptop touchpad VertEdgeScroll became invalid. I don't know what cause this, But basically, But I could resolve this with run following command again when i resume from standy mode. $: xmodmap ~/.Xmodmap $: synclient VertEdgeScroll=1 It have some pain to run this command frequently. so, I hope to resolve this problem (still valid when enter standby mode) at least, I want to automaticly run those command when I wakeup from standby mode. I have tried write a script in /user/lib/systemd/system-sleep case $1/$2 in pre/*) xmodmap /home/zw963/.Xmodmap ;; post/*) xmodmap /home/zw963/.Xmodmap ;; esac it not work. Thanks. -- Geek, Rubyist, Emacser Homepage: http://zw963.github.io -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] add a command line or small script just after an update
by jdd 01 Mar '16

01 Mar '16

hello on my small computer, updating kills my UEFI 32 bits grub.efi. What I need i run the grub2-install --target i386-efi after any update how can I do it? thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] run python script take error.
by Billy.Zheng 01 Mar '16

01 Mar '16

when I run offlineimap, a python script for receive email. get a error message: $: offlineimap Traceback (most recent call last): File "/usr/bin/offlineimap", line 20, in <module> from offlineimap import OfflineImap File "/usr/lib/python2.7/site-packages/offlineimap/__init__.py", line 21, in <module> from offlineimap.init import OfflineImap File "/usr/lib/python2.7/site-packages/offlineimap/init.py", line 28, in <module> from offlineimap import accounts, threadutil, syncmaster File "/usr/lib/python2.7/site-packages/offlineimap/accounts.py", line 26, in <module> from offlineimap.repository import Repository File "/usr/lib/python2.7/site-packages/offlineimap/repository/__init__.py", line 25, in <module> from offlineimap.repository.IMAP import IMAPRepository, MappedIMAPRepository File "/usr/lib/python2.7/site-packages/offlineimap/repository/IMAP.py", line 25, in <module> from offlineimap import folder, imaputil, imapserver, OfflineImapError File "/usr/lib/python2.7/site-packages/offlineimap/imapserver.py", line 26, in <module> from ssl import SSLError, cert_time_to_seconds File "/usr/lib64/python2.7/ssl.py", line 97, in <module> import _ssl # if we can't import it, let the error propagate ImportError: /usr/lib64/python2.7/lib-dynload/_ssl.so: undefined symbol: SSLv2_method Only if i run this script with sudo, it worked fine. $ sudo offlineimap Where to change this behavior, make this python package can work with normal user account. thanks. -- Geek, Rubyist, Emacser Homepage: http://zw963.github.io -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] configuring it works tw891 with Leap
by jdd 01 Mar '16

01 Mar '16

Hello, After a week work on it and various thread right here, I could make my it works tw891 mostly work. I will report the status of the work here. Installing. The easier would be to have a 32 bits grub.cfg in the Leap EFI partition and some other simple config you can find in the other threads, but here what I did with success: http://dodin.info/wiki/pmwiki.php?n=Doc.UEFIBoot Next, I needed to get a network. I was glad have an usb ethernet device, but it can't work more than a handful minutes before failing. I could use an old DLW-G122 wifi dongle, but it was necessary to add "iw" and of course no network... I was glad the usb device accepted to work long enough to install iw, and I get internet :-) https://bugzilla.opensuse.org/show_bug.cgi?id=968953 the next update killed the grub32 install, but I could use my own one on reboot thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0