July 2014 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Re: Why is systemd[1] is mounting noauto partitions?
by Dirk Gently 13 Feb '15

13 Feb '15

Araluen wrote: > On Sun, 2014-06-01 at 16:13 -0400, Dirk Gently wrote: >> Linda Walsh wrote: >>> Felix Miata wrote: >>>> WRT openSUSE: The fence is down. The barn is empty. For all practical >>>> purposes the herd has been lost. If you don't want a system dependent >>>> on systemd... >>> --- >>> Well, that's until it goes a bit too far. >>> >>> Remember, it's just something to help help your system boot faster by >>> doing parallel boot. And now? Seems like it fell a bit short of that >>> initial goal, as well. If you already booted direct from HD and used >>> parallel boot in the run scripts, there seems to be a slowdown. What >>> I don't understand is why people keep converting more to systemd, when >>> it didn't make good on its initial promises. >> >> >> >> More importantly, shaving a couple of seconds off of boot time is >> really sooooper-dooooper important, why, exactly? >> >> Systemd is doing the equivalent of fouling up the reliability of all the >> critical control systems of an automobile, all for the stated goal of >> gettin the engine to start in 3 seconds rather than 4. >> >> The rsultant calamities would wind up in court as criminal malfeasance. >> >> Nobody has yet explained WHY saving a couple of seconds at boot time >> is ooh soooo important (And I remember the days when unix systems with only >> 1 MB of memory took 15 minutes to boot up) that it justifies fucking up the >> entire concept of run-levels, and using well-debugged shell-scripts rather than >> some pulled-out-of-the-ass custom scripting language which is NOT anywhere >> close to fully debugged, and config files full of XML crud. >> >> I think we both agree that the net effect of the trade-offs is not beneficial to users or system >> administrators, but it sure does stroke the ego of Lennert Poettering and Kay Sievert. There's >> going to be a special place in hell for those two. >> > > Well then, if we are compromising system stability for such a negotiable > benefit, how do we turn the situation around? > Or is it full speed ahead and damn the torpedoes. Unlike Farrugut's order at the Battle of Mobile Bay, going full-speed ahead is not going to achieve any useful objectives, yet the dangers of systemd are still there. For one, systemd is making APPLICATIONS now dependant on the systemd API, which means when even the biggest fanboys here, at Redhat, and other distributions finally are forced to admit that systemd is a crock of shit.... we won't be able to remove it.... in other words, unlike Farragut, the probability of eventually being blown out of the water by a systemd torpedo is 100%. SysV init has problems, but without a doubt, it does NOT present itself as being a massive security hole, nor present the risk of making a system unbootable. > > Cheers, Mark > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

33 291

[opensuse] No sound in Minecraft
by Mike 03 Feb '15

03 Feb '15

I've asked on the minecraft forums without a response so I'm trying here in case that it might be a SuSE configuration issue. I do not have sound in the game. This has been a problem for several versions nowCurently running 1.7.5. I've also tried the last 2 snapshots. I can play music fine and was able to play the sound files in .mineraft/assets/objects/* via Amarok. I have deleted the assets folder and had re-downloaded everything. I looked in the bug list and I found a few sound related issues, but they suggested that there was some sounds. The log only mentions minecraft:mob.witch.idle, but there are no sounds at all in game, but in options everything is set to 100%. I tried to force an older version in profile editor but still no sound going back to 1.4.2. I see a java Playback Stream in the mixer and volume is 100% there too. Any ideas? Relevant entries in dev console [16:00:51 INFO]: Minecraft Launcher 1.3.11 (through bootstrap 4) started on linux... [16:00:51 INFO]: System.getProperty('os.name') == 'Linux' [16:00:51 INFO]: System.getProperty('os.version') == '3.7.10-1.24-desktop' [16:00:51 INFO]: System.getProperty('os.arch') == 'amd64' [16:00:51 INFO]: System.getProperty('java.version') == '1.7.0_51' [16:00:51 INFO]: System.getProperty('java.vendor') == 'Oracle Corporation' [16:00:51 INFO]: System.getProperty('sun.arch.data.model') == '64' [10:12:37 INFO]: Client> [10:12:37] [Server thread/INFO]: Changing view distance to 12, from 10 [10:16:23 INFO]: Client> [10:16:23] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:46:00 INFO]: Client> [10:46:00] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:46:08 INFO]: Client> [10:46:08] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:47:14 INFO]: Client> [10:47:14] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:47:20 INFO]: Client> [10:47:20] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:55:42 INFO]: Client> [10:55:42] [Client thread/INFO]: Stopping! [10:55:42 INFO]: Client> [10:55:42 INFO]: Client> SoundSystem shutting down... [10:55:42 INFO]: Client> Author: Paul Lamb, www.paulscode.com [10:55:42 INFO]: Client> [10:55:48 ERROR]: java.io.IOException: Stream closed [10:55:48 INFO]: Game ended with no troubles detected (exit code 0) -- Collector of vintage computers http://www.ncf.ca/~ba600 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] DenyHosts daemon mode on openSUSE 11.3
by LLLActive＠GMX.Net 23 Jan '15

23 Jan '15

Hi, I am trying to run DenyHosts on OS 11.3. I can get it to sync and update the hosts.deny file, but with "rcdenyhosts status" it reports as being "unused" just after I started it with "rcdenyhosts start". I tried also with yast, setting up as a service (daemon) and starting it. It also stops immediately. In the denyhosts.log file there is no error info, just what it used to set it up at start. I've gone through the configs several times, no joy. Anyone got DenyHosts running properly? :-/ Dreiel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] running a program before shutdown
by Benjamin 23 Nov '14

23 Nov '14

Hi everyone! I do have a small problem: I want to run unison before i log out of kde, so that my files are synchronized automatically. I created a .desktop file and placed it in /.kde4/shutdown/. The .desktop file is specified by the command: unison myprofile -batch I tried it, but it seems, that this doesn´t work, because nothing was synchronized after login in again. Although in the systemsettings in the category autostart, my .desktop is listed and set to logout. Any suggestions. Best Benjamin! ps.: I already tried it with a shell-scrpit, which i also placed in the shutdown folder, but this also didn´t work…

8 16

[opensuse] XFS filesystem total failure on return from hibernation.
by Carlos E. R. 05 Oct '14

05 Oct '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, Since yesterday (after an update), I have experimented twice the same problem, on return from hibernation. XFS fails completely, lots of kernel messages. System has to be restarted, recovery is impossible otherwise. It seems to affect one partition only (?), the one that has my home, on xfs. I booted the 13.1 XFCE rescue image, tried to xfs-repair that one. It complained that there was a log, that I should attempt to mount it first. Mount hung. It is unkillable. Reboot of system hung. smartctl -a gives no hint of problem. The hard disk is new (190 hours). I run "xfs_repair -L" on that disk, which succeeds with no error report. I'm at the moment running the long SMART test on that disk. It will take 226 minutes. This is the first report of error in the log: I will put a more complete version of the log in another post. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iF4EAREIAAYFAlMk14AACgkQja8UbcUWM1wgoQD/Ssm98MXd5XSXqi6AkdjhgHmR z+PSYYCkgbupkpnLJAgA/0WO9+HQ9Wgn7XzkVLQkv3RreJT/nZQfJRLx39TqWMar =cU8T -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 13

[opensuse] Curl errors in opensuse 12 and 13
by ianseeks 19 Sep '14

19 Sep '14

Hi Does anyone know why i always get "curl" errors using "zypper" or Yast to refresh/ update the repos? Its random as to which repos fails. see example below I don't ever recall this happening prior to opensuse 12. I expect this email might get dumped by the checking system because i did a copy and paste from a CLI session regards Ian sudo zypper ref root's password: Download (curl) error for 'http://download.opensuse.org/repositories/KDE:/Current/openSUSE_13.1/repoda…': Error code: Connection failed Error message: Could not resolve host: download.opensuse.org Abort, retry, ignore? [a/r/i/? shows all options] (a): r Retrieving repository 'KDE Current' metadata...........................[done] Building repository 'KDE Current' cache ...........................[done] Retrieving repository 'LibreOffice' metadata ...........................[done] Building repository 'LibreOffice' cache ...........................[done] Download (curl) error for 'http://download.videolan.org/pub/vlc/SuSE/13.1/repodata/repomd.xml': Error code: Connection failed Error message: Could not resolve host: download.videolan.org Abort, retry, ignore? [a/r/i/? shows all options] (a): r Download (curl) error for 'http://dl.google.com/linux/earth/rpm/stable/x86_64/repodata/repomd.xml': Error code: Connection failed Error message: Could not resolve host: dl.google.com Abort, retry, ignore? [a/r/i/? shows all options] (a): r Download (curl) error for 'http://packman.inode.at/suse/openSUSE_13.1/Essentials/repodata/repomd.xml': Error code: Connection failed Error message: Could not resolve host: packman.inode.at Abort, retry, ignore? [a/r/i/? shows all options] (a): r Retrieving repository 'packman-multimedia' metadata ...................[done] Building repository 'packman-multimedia' cache .......................[done] Loading repository data... Reading installed packages... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] SuSE 13.1: Evince: Top menus broken
by MarkusGMX 15 Sep '14

15 Sep '14

I have an obvious error in the menu of Evince: http://img5.fotos-hochladen.net/uploads/evincebugqx3fjckpil.jpg Any pointers what that could be? Any changed icon directories in OpenSuSE 13.1 ? Mouse over of course works. On SuSE 12.1 evince was working without problems. Thx in advance -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] opensuse 13.1 annoying limitations
by Marco Calistri 31 Aug '14

31 Aug '14

As per the subject, IMHO this is the list: 1) BLUETOOTH doesn't works completely 2) Power Management "sucks" with laptops 3) Totem warnings the user to download plug-ins which are not necessary or which cannot get downloaded and installed I consider all the above as limitations in a modern O.S. Sorry for my commentary! Regards, -- WARNING TO ALL PERSONNEL: Firings will continue until morale improves. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 27

[opensuse] LibreOffice User Interface does not see gtk theme - howto fix?
by David C. Rankin 07 Aug '14

07 Aug '14

All, I got LO installed by default, but also installed OO to make sure there was continuity in the office templates between the 3x versions and the current 4x. To may my great chagrin, the UI colors of OO and LO are completely different: http://www.3111skyline.com/dl/ss/suse/oo_lo-ui_differences.jpg Obviously OO is picking up the gtk theme and LO isn't. Is there any way to tell LO to use the system colors and theme? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Libreoffice NFS
by Paul Groves 06 Aug '14

06 Aug '14

I have tried opening several libreoffice documents today from my NFS share on my NAS and every file asks to open in read only. Copied to the local HDD, the file opens fine. I have tried turning off file locking inlibre office and it makes no difference. This was working a couple of days ago and the issue has appear on my opensuse 13.1 laptop and desktop and on a few ubuntu machines at work. This is frustrating as a couple of months ago libreoffice broke compatability with CIFS/SMB shares and now NFS isn't working either! -- Paul Groves -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8