June 2012 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Looking for a CRM package - that can print customer history
by Duaine Hechler 30 Jun '12

30 Jun '12

I am desperately looking for a CRM package that can print anything close to this (customer with service history) ? Note: For some dumb reason, most of the mainstream CRM's - DON'T have a print function (not even to PDF) Thanks, Duaine --------------------------- Name: Kilo, Kathy (Charles, Dr) ***** 44 miles ***** Addr1: 38 Countryside Lane CSZ: St. Louis, MO 63131 Phone: (C-Kathy) 1-636-734-5557 (H) 314-966-3050 (W) 314-434-6500 Email: kathy(a)kkilo.com (or) kathy.kilo-peterson.l8j8(a)statefarm.com Make: Mason & Hamlin - Ampico Model: RA S/N: 36211 (1927) Dir: Merge onto I-270 W.......................................... 12.7 mi Merge onto I-64 E/US-40 E/US-61 S via EXIT 12A-B............ 1.9 mi Take EXIT 27 toward Spoede Rd............................... 0.3 mi Enter next roundabout and take the 2nd exit onto S Forty Dr. 0.1 mi Turn right onto S Spoede Rd................................. 0.1 mi Turn right onto Clayton Rd.................................. 0.3 mi Turn left onto N Geyer Rd................................... 0.9 mi Turn right onto Countryside Ln.............................. 0.4 mi Turn left to stay on Countryside Ln......................... 0.1 mi Turn right to stay on Countryside Ln........................ 0.1 mi Total Travel Estimate: 34 minutes / 21.51 miles Text: 06/19/12: Bottom roll problems again; play/repeat switch acting up; play/reroll chain off and partially wrapped around bottom gear Total 3.5 hrs 05/09/12: Roll does not rewind - pull off top spool; bottom spool problems Found bottom spool leaking air, again, to continuously try and turn off. Applied LOTS of grease to the shaft and finally stopped. Also, found a loose hose to the Ampico switch, once connected, Ampico expressions started working again. Tried reroll and replay many times seems to be fixed again. N/C Bought $25 Spanish roll. Sending invoice soon. 04/09/12: Roll does not rewind - pull off top spool 03/19/12: Bottom spool problems - left as Auto Reroll 01/30/12: Rolls stopped after 2 rolls. Found the large roll slready on, not properly set on the right side flange and roll spindle - roll was underneath the roll spindle. Really need the 3/8" elbows so the drawer can be pushed in. 01/2?/12: Coustomer closed the drawer and the hoses became disconnected. Put a little thin film of CA on the nipple and reattached the hoses. 01/20/12: Install rebuilt box pump; lubed left end of the bottom spool to keep from dumping into reroll; started to test with test roll - checked on the first test and found that the tubing was different or may be an an Ampico B - so stopeed and buttoned it up. Tempo is still no right - don't know how to get to it. 01/13/12: Tuned, replaced 3 drawer to action hoses 3/8" x 14-1/2"; tried to fix tempo lever - could not find to right place to adjust it. Before doing Ampico test roll - check vacuum at box pump - was not at 30" - box pump needed rebuild. Gave customer the history of the piano. Not invoiced yet. 12/22/11: Check player piano tracking and hoses. Total $85 Tracking seems ok; fixed bottom spool roll shut off (found spool air tube clogged; CA'ed far left hose (view from underneath looking front) Sold rolls - Alpine Storm & Washington Post March. -- Duaine Hechler Piano, Player Piano, Pump Organ Tuning, Servicing& Rebuilding Reed Organ Society Member Florissant, MO 63034 (314) 838-5587 dahechler(a)att.net www.hechlerpianoandorgan.com -- Home& Business user of Linux - 11 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Trying to format a usb memory
by Robert Rawlinson 30 Jun '12

30 Jun '12

When I try to format using: sudo /sbin/mkfs.vfat -F 32 MULTIBOOT /dev/sdb1 I get the following error: mkfs.vfat 3.0.10 (12 Sep 2010) MULTIBOOT: No such file or directory I copied this from a message on e-mail. Can someone point me towards an answer? Bob R -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Suddenly, broken NFS ownership on client side
by Carlos E. R. 30 Jun '12

30 Jun '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Using NFS on 11.4 both server and client. Today I see this - I changed nothing - on the client: minas-tirith:~ # l /var/cache/zypp/nfs_packages/11_4/ total 12 drwxr-xr-x 29 4294967294 4294967294 4096 Jun 29 00:23 ./ drwxr-xr-x 6 4294967294 4294967294 4096 Feb 12 03:01 ../ - -rw-r--r-- 1 4294967294 4294967294 0 Jun 3 2011 11.4 drwxr-xr-x 3 4294967294 4294967294 19 Mar 24 01:36 EXT.P_NVidia/ drwxr-xr-x 5 4294967294 4294967294 52 May 9 2011 Ext_Packman/ drwxr-xr-x 2 4294967294 4294967294 6 May 9 2011 Ext_Videolan/ drwxr-xr-x 2 4294967294 4294967294 4096 Jun 9 15:16 Ext_google-talkplugin/ The same directory on the server side: Telcontar:~ # l /var/cache/zypp/packages.link/ total 12 drwxr-xr-x 29 root root 4096 Jun 29 00:23 ./ drwxr-xr-x 6 root root 4096 Feb 12 03:01 ../ - -rw-r--r-- 1 root root 0 Jun 3 2011 11.4 drwxr-xr-x 3 root root 19 Mar 24 01:36 EXT.P_NVidia/ drwxr-xr-x 5 root root 52 May 9 2011 Ext_Packman/ drwxr-xr-x 2 root root 6 May 9 2011 Ext_Videolan/ drwxr-xr-x 2 root root 4096 Jun 9 15:16 Ext_google-talkplugin/ What happened to the users name? It should be root, not that number. /etc/exports (server): /data/storage_c/repositorios_zypp/ 192.168.1.0/24(fsid=1234,rw,no_root_squash,nohide,no_subtree_check,insecure) /etc/fstab (client): 192.168.1.14:/data/storage_c/repositorios_zypp/ /var/cache/zypp/nfs_packages nfs defaults,noauto,nofail 0 0 - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iEYEARECAAYFAk/s3JUACgkQtTMYHG2NR9UzEwCgixB+5IS5qdcLV9LbBSx/TCsU 8yYAoJP+G6ViDPA738LEq+i2KLkJY3of =hhop -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] Re: [opensuse-offtopic] I HATE the Irishman......
by Odd Ball 30 Jun '12

30 Jun '12

Basil Chupin schreef: > ....called Murphy! :-( > > With reference to the thread of mine re SATA 3 and using mobile > rack(s) which are SATA 2 compliant, I ordered another such mobile rack > on Tuesday together with another 1TB HDD to match the one I bought at > the end of April. > > So, both got delivered yesterday - and away I went about installing > the racks and the HDDs. > > Now, one would think that after all these years I would know better > and would have checked things out to make sure that everything would > come together without hassles, right? WRONG! :-( > > The damn racks were too long to fit in the case - they hit the > capacitors and whatever on the motherboard so couldn't be used :-( . > > OK, so I installed the second HDD just as I did the first one. Great. > 2 useless mobile racks now sitting in the plastic bag ready to go into > the garage..... > > I remove the computer from the workbench and place it in its normal > spot where it is used daily. Start it up -- and I have no access to > the network :-( . The onboard LAN has suddenly gone belly-up :'( . > > Today I managed to find and buy a PCIe network card but then > discovered that I couldn't install it because the video card is so > damn big that it covered the PCIe slot where the network card had to > go. Had to move the video card to another slot. Something which was > only a 5 minute job max ended up taking over an hour. > > There is more to this saga but I'll stop here :-) . > > BC > Some days or better not to remember, or better do? ...(?) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Inssider on 12.1
by James Knott 30 Jun '12

30 Jun '12

I'm trying to run InSSIDer on openSUSE 12.1. However, whenever I try to start it, I get an error: Unhandled Exception: System.TypeLoadException: Could not load type 'Extensions.NewsFeed.NewsFeedView' from assembly 'MetaGeek.inSSIDer.Extensions.NewsFeed, Version=0.1.1.429, Culture=neutral, PublicKeyToken=null'. at (wrapper managed-to-native) System.MonoType:GetPropertiesByName (System.MonoType,string,System.Reflection.BindingFlags,bool,System.Type) at System.MonoType.GetProperties (BindingFlags bindingAttr) [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.AttributedModel.AttributedPartCreationInfo+<GetExportMembers>d__4.MoveNext () [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.Any[MemberInfo] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.AttributedModel.AttributedPartCreationInfo.IsPartDiscoverable () [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.AttributedModel.AttributedModelDiscovery.CreatePartDefinitionIfDiscoverable (System.Type type, ICompositionElement origin) [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.Hosting.TypeCatalog.get_PartsInternal () [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.Hosting.TypeCatalog.CreateIndex () [0x00000] in <filename unknown>:0 at System.Lazy`1[System.Collections.Generic.IDictionary`2[System.String,System.Collections.Generic.List`1[System.ComponentModel.Composition.Primitives.ComposablePartDefinition]]].get_Value () [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.Hosting.TypeCatalog.GetCandidateParts (System.ComponentModel.Composition.Primitives.ImportDefinition definition) [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.Hosting.TypeCatalog.GetExports (System.ComponentModel.Composition.Primitives.ImportDefinition definition) [0x00000] in <filename unknown>:0 at System.ComponentModel.Composition.Hosting.AssemblyCatalog.GetExports (System.ComponentModel.Composition.Primitives.ImportDefinition definition) [0x00000] in <filename unknown>:0 ... It doesn't matter if I do this as root or mere mortal. I downloaded the 64 bit RPM from: https://github.com/metageek-llc/inSSIDer-2-Cross-Platform/downloads The Windows version of this app runs very well. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] annoying thunderbird popups
by lynn 29 Jun '12

29 Jun '12

12.1 zypper updated yesterday. I get one of these every 2 minutes when in tb. A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: resource:///modules/gloda/indexer.js:1452 Very annoying. Any ideas? L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] Uninstalling kernel and "linux" link
by Andrea Turrini 29 Jun '12

29 Jun '12

Hi all, In my system I have enabled the multiversion for kernel-desktop so I have just uninstalled kernel 3.1.10-1.13.1 since I have seen it was removed from the Update repo. So I have uninstalled also the corresponding kernel-devel, kernel-desktop-devel and kernel-source. I have noted that in /usr/src the "linux" link still points to the missing linux-3.1.10-1.13 (thus the link is broken) instead of the correct linux-3.1.10-1.9. Is this a wanted behaviour? or is it a bug? Should I report it? Best, Andrea -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Audio recording via S/PDIF input?
by Mark Hounschell 28 Jun '12

28 Jun '12

This may not be the best place to ask but since I am using SuSE Linux, figured I'd give it a try. Any SuSE users out there with experience recording audio to a PC (running SuSE Linux) from a digital source using the motherboards SPDIF input? My digital source is the Analog to Digital section of an RME ADI-2. My MB is a GIGABYE GA-770TA-UD3. My SuSE is 11.4. I'm trying to use audacity-2.0.0-71.1.i586. It doesn't seem to work. My symptoms are similar to what, I read happens, when the input devices (SPDIF-in) clock isn't properly running in slave mode. IE, the SPDIF-in isn't using the sources (ADI-2) clock for it's clock. I get very-very low levels and when played back doesn't even sound like audio. Thanks in advance Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Repository GNOME:Contrib is dead
by Atri 28 Jun '12

28 Jun '12

Hi! Please note that the repository GNOME:Contrib [1] is now dead. Packages previously in this repository have all been pushed to Factory. If this is in the list of your subscribed repositories, please remove it (using zypper rr <reponame> or from YaST, etc.) Thanks and bye. -- Atri [1] This used to be the development branch of GNOME packages living in Contrib http://download.opensuse.org/repositories/GNOME:/Contrib/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] thunderbird script errors
by George Olson 28 Jun '12

28 Jun '12

I am continuously getting "script errors" with thunderbird, and it is becoming quite disruptive to my regular work. It switches focus to a dialog box with the script error while I am in the middle of other things and has the following words: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Following this is a type of URL or something. This is now happening about every 5 minutes as long as I have thunderbird open. Any ideas on what I should try? Perhaps go back to an earlier version of thunderbird? Here are some of the types of errors I am getting: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://calendar/content/calendar-invitations-manager.js:64 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://trackerbird/content/mailstore.js:183 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://trackerbird/content/mailstore.js:183 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://messenger/content/folderPane.js:1899 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://messenger/content/mailWindow.js:575 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://calendar/content/calendar-invitations-manager.js:64 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: resource:///modules/gloda/indexer.js:1452 A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://messenger/content/tabmail.xml:1480 -- G.O. Box #1: 12.1 | KDE 4.8.4 | AMD Phenom IIX4 | 64 | ATI Radeon HD 3300 | 16GB Box #2: 12.1 | KDE 4.8.4 | AMD Athlon X3 | 64 | nVidia C61 GeForce 7025 | 4GB Laptop: 12.1 | KDE 4.8.3 | Core2 Duo T8100 | 64 | Intel 965GM | 4GB RAM learning openSUSE and loving it -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4