February 2008 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Update directory
by Carl Spitzer 05 Feb '08

05 Feb '08

I know how to do an update using a disk but as there are so many 1.6 gig I can not use that method with a system which only has a CDRW. I can however copy the i386 directory to flash and take it to the other. Problem is the error messages I get when trying to either use the usb or a local directory /Storage0/i386 and pointing to it with Yast. How do I overcome this in 10.0? Its an old box not likely to handle 10.3 yet. -- _______ _______ _______ __ / ____\ \ / / ____|_ _\ \ / / | | \ \ /\ / / (___ | | \ \ / / | | \ \/ \/ / \___ \ | | \ \/ / | |____ \ /\ / ____) |_| |_ \ / \_____| \/ \/ |_____/|_____| \/ | \ /|\ || |\ / |~~\ /~~\ /~~| //~~\ | \ / | \ || | X |__/| || |( `--. |__ | | \| \_/ / \ | \ \__/ \__| \\__/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] That USB-mounted camera drive and opensuse 10.3?
by mark 05 Feb '08

05 Feb '08

This is *weird*. I couldn't sudo mount it, I couldn't mount it as root... but on a whim, I pulled up konquerer, which I never use, saw /dev/sdd1, and for the hell of it, went to tools->run shell command, and did a mount /dev/sdd1 /mnt/usb... and it worked, no complaints about needing to specify the filesystem type or anything.... mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Can't produce any usable output with LyX
by Carlos E. R. 05 Feb '08

05 Feb '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Content-ID: <alpine.LSU.1.00.0802031222400.22559(a)nimrodel.valinor> Hi, I'm trying to write an article using LyX. I define the language as Spanish. I write a single word, "olé". I export to ascii, and I get "Ole'". Useless. I then specify "utf8". Now, when converting, I get a pop window that says "an empty ouput file was generated", and then another "LaTeX Error: file 'CJK.sty' not found ". I search for CJK.sty, and found it in package texlive-cjk-2007-69.noarch.rpm which I install, even though I don't understand why I have to install CJK support to write in Spanish: Description : CJK LaTeX is a macro package for LaTeX to enable typesetting Chinese, Japanese, and Korean. It supports (simultaneously) various CJK encodings, such as Big5, GB, JIS, KS, and CNS. It doesn't do any good: I still get the same error in LyX, and I can't get any output whatsoever in any format. As always, LyX fails very short of the mark: it is useless. At least in SuSE. How can I get LyX to work? I have _never_ been able to get LyX to really work (in years). I suppose it works somewhere, but for me, that I have no idea of Tex and that I simply want it to work out of the box, it has never worked. Never, since suse 5 or 6. And I keep trying because I like the idea... (I'll try removing anything related to lyx and tex and reinstalling. Who knows.) [...] Same thing: doesn't work, different symptoms. With one document: - export to plain text (ps2ascii) uses incorrect tildes. - export to plain text, now is more correct, but if I use "insert program listing", the listing does not get the to the output. With another document (ie, one with more than a single word), I still get "LaTeX Error: file 'CJK.sty' not found" (and I don't have any idea of eastern languages). On the xterm I see: Could not find LaTeX command for character 0xfffd. LaTeX export will fail. How can I find and remove that char, or otherwise configure lyx to forget that char and write a "?" in its place, or whatever is needed for it to work? I create a new empty document, using the "docbook_article" template, and try to produce output, and it fails - as always: An error occurred whilst running sgmltools -b dvi 'newfile1.sgml' Traceback (most recent call last): File "/usr/bin/sgmltools", line 83, in <module> tool.processFile(curfile) File "/usr/share/sgml/misc/sgmltools/python/SGMLtools.py", line 230, in processFile dssslfile = utils.findStylesheet(stylesheet, self._aliases) File "/usr/share/sgml/misc/sgmltools/python/utils.py", line 307, in findStylesheet return findStylesheet(name, aliases) File "/usr/share/sgml/misc/sgmltools/python/utils.py", line 317, in findStylesheet raise IOError, "Couldn't resolve pubid [%s]" % id IOError: Couldn't resolve pubid ["-//SGMLtools//DOCUMENT Docbook Style Sheet for Print//EN"] Error: Cannot convert file and nothing is created. Lyx is useless, and I'm very frustrated :-( - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) iD8DBQFHpcIktTMYHG2NR9URAjuBAJ0RUupac79GiNHVnYUoOdlYc/M99wCfQvNk i80rnP2UYbG3UNhqSZQKa7k= =/8xu -----END PGP SIGNATURE-----

7 21

[opensuse] Re: openSuSE 10.3 & camera USB h/d
by mark 05 Feb '08

05 Feb '08

mark wrote: > I used to mount it with no trouble under SuSE 10.0; now it *insists* > it needs to know the filesystem type. > > Anyone got a clue? Googling, I'm finding folks asking about this, > but no answers. > Well, I got it to accept usbfs... but now it looks more like something on /proc.... Following myself up again - what I should have added to the last is: ll /mnt/usb total 4 drwxr-xr-x 6 root root 0 2008-01-07 14:31 ./ drwxr-xr-x 9 root root 4096 2008-02-03 14:59 ../ dr-xr-xr-x 2 root root 0 2008-01-07 14:31 001/ dr-xr-xr-x 2 root root 0 2008-01-07 14:31 002/ dr-xr-xr-x 2 root root 0 2008-01-07 14:31 003/ dr-xr-xr-x 2 root root 0 2008-01-07 14:31 004/ -r--r--r-- 1 root root 0 2008-01-07 15:15 devices I've also tried msdos, umsdos, and vfat, and all of them tell me wrong filesystem type. mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] [OT] Let's thank Henne for his excellent work
by Jerry Feldman 05 Feb '08

05 Feb '08

I'd just like to take this opportunity to publicly thank Henne for his hard work on these listservs. Keeping listservs up and running can take a lot of time and effort. We all expect the listserv to be up and running 24x7, and it generally is. OpenSuSE has about 50 listservs on different topics, and in different languages. -- -- Jerry Feldman <gaf(a)blu.org> Boston Linux and Unix PGP key id: 537C5846 PGP Key fingerprint: 3D1B 8377 A3C0 A5F2 ECBB CA3B 4607 4319 537C 5846

16 15

[opensuse] ATA/UDMA problem when switching from SUSE 10.0 to openSUSE 10.3
by Sven.Hartrumpf＠FernUni-Hagen.de 04 Feb '08

04 Feb '08

Hi all. I have two similar ATA drives that are recognized by SUSE 10.0 as UDMA 100, see boot.msg excerpt: <6>PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. <6> ide2: BM-DMA at 0x8800-0x8807, BIOS settings: hde:pio, hdf:pio <6> ide3: BM-DMA at 0x8808-0x880f, BIOS settings: hdg:pio, hdh:pio <7>Probing IDE interface ide2... <4>hde: SAMSUNG SP1213N, ATA DISK drive <4>hdf: SAMSUNG SP1614N, ATA DISK drive <4>ide2 at 0xa000-0xa007,0x9802 on irq 10 <7>ide_acpi_hwif_get_handle: ENTER: device ide2 <7>ide_get_dev_handle: ENTER: pci 00:11.0 <7>ide_get_dev_handle: for dev=0x11.0, addr=0x110000, parent=0xdff6ec00, *handle=0x00000000 <7>ide_acpi_hwif_get_handle: ide_get_dev_handle failed (-19) <7>ide_acpi_init: no ACPI object for ide2 found <6>hde: max request size: 128KiB <6>hde: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) <6>hde: cache flushes supported <6> hde: hde1 hde2 < hde5 hde6 hde7 hde8 > hde3 hde4 <6>hdf: max request size: 128KiB <6>hdf: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) <6>hdf: cache flushes supported <6> hdf: hdf1 hdf2 A parallel installation of openSUSE 10.3 on the same machine treats the second ATA disk as PIO/4, see boot.msg excerpt below. If I trusted the messages, I would conclude openSUSE 10.3 shows a regression here. Any similar effects, any help? <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>pata_via 0000:00:04.1: version 0.3.1 <6>scsi0 : pata_via <6>scsi1 : pata_via <6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d800 irq 14 <6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d808 irq 15 <6>ata1.00: ATAPI: _NEC DV-5700B, 1.91, max UDMA/33 <6>ata1.00: configured for UDMA/33 <5>scsi 0:0:0:0: CD-ROM _NEC DV-5700B 1.91 PQ: 0 ANSI: 5 <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 <7>PCI: setting IRQ 10 as level-triggered <6>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 <6>scsi2 : pata_pdc202xx_old <6>scsi3 : pata_pdc202xx_old <6>ata3: PATA max UDMA/100 cmd 0x0001a000 ctl 0x00019802 bmdma 0x00018800 irq 10 <6>ata4: PATA max UDMA/100 cmd 0x00019400 ctl 0x00019002 bmdma 0x00018808 irq 10 <6>ata3.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100 <6>ata3.00: 234493056 sectors, multi 16: LBA48 <6>ata3.01: ATA-7: SAMSUNG SP1614N, TM100-30, max UDMA/100 <6>ata3.01: 312581808 sectors, multi 16: LBA48 <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/100 <5>scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1213N TL10 PQ: 0 ANSI: 5 <5>scsi 2:0:1:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5 <6>ACPI: CPU0 (power states: C1[C1] C2[C2]) <6>ACPI: Processor [CPU0] (supports 16 throttling states) <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>USB Universal Host Controller Interface driver v3.0 <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 <7>PCI: setting IRQ 9 as level-triggered <6>ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 <6>uhci_hcd 0000:00:04.2: UHCI Host Controller <6>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:04.2: irq 9, io base 0x0000d400 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.22.16-0.1-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:04.2 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 <6>uhci_hcd 0000:00:04.3: UHCI Host Controller <6>uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:04.3: irq 9, io base 0x0000d000 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.22.16-0.1-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:04.3 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 < sda5 sda6 sda7<6>usb 1-2: new full speed USB device using uhci_hcd and address 2 <4> sda8 > sda3 sda4 <5>sd 2:0:0:0: [sda] Attached SCSI disk <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sdb: sdb1 sdb2 <5>sd 2:0:1:0: [sdb] Attached SCSI disk <6>usb 1-2: new device found, idVendor=050f, idProduct=0003 <6>usb 1-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 1-2: configuration #1 chosen from 1 choice <6>hub 1-2:1.0: USB hub found <6>hub 1-2:1.0: 4 ports detected <4>Marking TSC unstable due to: possible TSC halt in C2. <6>Time: acpi_pm clocksource has been installed. <6>usb 1-2.1: new low speed USB device using uhci_hcd and address 3 <6>usb 1-2.1: new device found, idVendor=046d, idProduct=c00e <6>usb 1-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 1-2.1: Product: USB-PS/2 Optical Mouse <6>usb 1-2.1: Manufacturer: Logitech <6>usb 1-2.1: configuration #1 chosen from 1 choice <6>usb 1-2.2: new low speed USB device using uhci_hcd and address 4 <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x6 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:04:5b:20:00/00:00:00:00:00/f0 Emask 0x30 (host bus error) <6>ata3: soft resetting link <6>usb 1-2.2: new device found, idVendor=046a, idProduct=0001 <6>usb 1-2.2: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 1-2.2: configuration #1 chosen from 1 choice <6>usbcore: registered new interface driver hiddev <6>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 <6>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:04.2-2.1 <6>ata3.00: configured for UDMA/100 <6>input: HID 046a:0001 as /class/input/input2 <6>ata3.01: configured for UDMA/100 <6>ata3: EH complete <6>input: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:04.2-2.2 <6>usbcore: registered new interface driver usbhid <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/100 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/100 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <4>ata3.01: limiting speed to UDMA/66:PIO4 <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/66 <6>ata3: EH complete <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/66 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/66 <6>sd 2:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK <6>sd 2:0:1:0: [sdb] Sense Key : Aborted Command [current] [descriptor] <4>Descriptor sense data with sense descriptors (in hex): <6> 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6> 00 00 20 5e <6>sd 2:0:1:0: [sdb] Add. Sense: Scsi parity error <4>end_request: I/O error, dev sdb, sector 8279 <3>Buffer I/O error on device sdb1, logical block 4108 <4>lost page write due to I/O error on sdb1 <3>Buffer I/O error on device sdb1, logical block 4109 <4>lost page write due to I/O error on sdb1 <3>Buffer I/O error on device sdb1, logical block 4110 <4>lost page write due to I/O error on sdb1 <3>Buffer I/O error on device sdb1, logical block 4111 <4>lost page write due to I/O error on sdb1 <6>ata3: EH complete <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>kjournald starting. Commit interval 5 seconds <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:46:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/66 <6>ata3: EH complete <4>ata3.01: limiting speed to UDMA/33:PIO4 <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:46:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:46:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:46:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:46:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:46:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>sd 2:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK <6>sd 2:0:1:0: [sdb] Sense Key : Aborted Command [current] [descriptor] <4>Descriptor sense data with sense descriptors (in hex): <6> 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6> 00 00 00 46 <6>sd 2:0:1:0: [sdb] Add. Sense: Scsi parity error <4>end_request: I/O error, dev sdb, sector 63 <3>Buffer I/O error on device sdb1, logical block 0 <4>lost page write due to I/O error on sdb1 <6>ata3: EH complete <6>EXT3 FS on sdb1, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x4 <3>ata3.01: cmd ca/00:08:57:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 4096 out <4> res 51/84:01:5e:20:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for UDMA/33 <6>sd 2:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK <6>sd 2:0:1:0: [sdb] Sense Key : Aborted Command [current] [descriptor] <4>Descriptor sense data with sense descriptors (in hex): <6> 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6> 00 00 20 5e <6>sd 2:0:1:0: [sdb] Add. Sense: Scsi parity error <4>end_request: I/O error, dev sdb, sector 8279 <3>Buffer I/O error on device sdb1, logical block 1027 <4>lost page write due to I/O error on sdb1 <6>ata3: EH complete <4>ata3.01: limiting speed to PIO4 <3>ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.01: BMDMA stat 0x6 <3>ata3.01: cmd ca/00:10:5f:20:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 8192 out <4> res 51/84:04:6b:20:00/00:00:00:00:00/f0 Emask 0x30 (host bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>scsi 0:0:0:0: Attached scsi generic sg0 type 5 <5>sd 2:0:0:0: Attached scsi generic sg1 type 0 <5>sd 2:0:1:0: Attached scsi generic sg2 type 0 <6>Linux agpgart interface v0.102 (c) Dave Jones <6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 <4>3c59x: Donald Becker and others. <6>0000:00:0d.0: 3Com PCI 3c905C Tornado at f881a000. <6>agpgart: Detected VIA Twister-K/KT133x/KM133 chipset <6>agpgart: AGP aperture is 32M @ 0xe6000000 <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 <7>PCI: setting IRQ 5 as level-triggered <6>ACPI: PCI Interrupt 0000:00:04.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 <7>PCI: Setting latency timer of device 0000:00:04.5 to 64 <4>sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 0:0:0:0: Attached scsi CD-ROM sr0 <7>parport_pc: VIA 686A/8231 detected <7>parport_pc: probing current configuration <7>parport_pc: Current parallel port base: 0x378 <6>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>parport_pc: VIA parallel port: io=0x378, irq=7 <6>input: Power Button (FF) as /class/input/input3 <6>ACPI: Power Button (FF) [PWRF] <6>input: Power Button (CM) as /class/input/input4 <6>ACPI: Power Button (CM) [PWRB] <4>i2c-adapter i2c-9191: sensors disabled - enable with force_addr=0xe200 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 <4>rtc_cmos: probe of 00:05 failed with error -16 <6>Adding 2369576k swap on /dev/sda4. Priority:-1 extents:1 across:2369576k <6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel(a)redhat.com <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:43:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:43:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:43:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:43:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:43:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:43:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/100 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <4>ata3.00: limiting speed to UDMA/66:PIO4 <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:43:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:43:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/66 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:43:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:43:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/66 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:43:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:43:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/66 <6>ata3.01: configured for PIO4 <6>sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK <6>sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] <4>Descriptor sense data with sense descriptors (in hex): <6> 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6> 00 a3 cf 43 <6>sd 2:0:0:0: [sda] Add. Sense: Scsi parity error <4>end_request: I/O error, dev sda, sector 10735427 <3>Buffer I/O error on device sda8, logical block 3944 <4>lost page write due to I/O error on sda8 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:44:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:4a:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/66 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <4>ata3.00: limiting speed to UDMA/33:PIO4 <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:44:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:4a:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:44:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:4a:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:44:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:4a:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:44:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:4a:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:44:cf:a3/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:4a:cf:a3/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK <6>sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] <4>Descriptor sense data with sense descriptors (in hex): <6> 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6> 00 a3 cf 4a <6>sd 2:0:0:0: [sda] Add. Sense: Scsi parity error <4>end_request: I/O error, dev sda, sector 10735428 <3>Buffer I/O error on device sda8, logical block 3945 <4>lost page write due to I/O error on sda8 <3>Buffer I/O error on device sda8, logical block 3946 <4>lost page write due to I/O error on sda8 <3>Buffer I/O error on device sda8, logical block 3947 <4>lost page write due to I/O error on sda8 <3>Buffer I/O error on device sda8, logical block 3948 <4>lost page write due to I/O error on sda8 <3>Buffer I/O error on device sda8, logical block 3949 <4>lost page write due to I/O error on sda8 <3>Buffer I/O error on device sda8, logical block 3950 <4>lost page write due to I/O error on sda8 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:37:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:37:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:37:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:37:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:37:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:37:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:37:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:37:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:37:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:37:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:01:37:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out <4> res 51/84:01:37:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for UDMA/33 <6>ata3.01: configured for PIO4 <6>sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK <6>sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] <4>Descriptor sense data with sense descriptors (in hex): <6> 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 <6> 00 23 5c 37 <6>sd 2:0:0:0: [sda] Add. Sense: Scsi parity error <4>end_request: I/O error, dev sda, sector 2317367 <4>printk: 1 messages suppressed. <3>Buffer I/O error on device sda6, logical block 3944 <4>lost page write due to I/O error on sda6 <6>ata3: EH complete <4>ata3.00: limiting speed to PIO4 <3>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 <3>ata3.00: BMDMA stat 0x4 <3>ata3.00: cmd ca/00:07:38:5c:23/00:00:00:00:00/e0 tag 0 cdb 0x0 data 3584 out <4> res 51/84:01:3e:5c:23/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) <6>ata3: soft resetting link <6>ata3.00: configured for PIO4 <6>ata3.01: configured for PIO4 <6>ata3: EH complete <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:0:0: [sda] 234493056 512-byte hardware sectors (120060 MB) <5>sd 2:0:0:0: [sda] Write Protect is off <7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:1:0: [sdb] Write Protect is off <7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>loop: module loaded

1 0

Re: [opensuse] iptables problem after kernel upgrade.
by Darragh 04 Feb '08

04 Feb '08

On Mon, February 4, 2008 9:30 am, Darragh O'Heiligh wrote: > > >>>> Andreas Jaeger <aj(a)suse.de> 01/02/2008 10:23:41 >>> > "Darragh" <lists(a)digitaldarragh.com> writes: > >> Is there any reason why my IpTables now do not work as a result of the upgrade to 2.6.22.16? >> >> I've even tried adding them again but still nothing! >> >> Any suggestions? > > Could you describe a bit better what exactly does not work? You might want to open a bugreport in our bugzilla, > > > Sorry for the late reply on this. > > When I add a rule via iptables -A .............., it is not shown when I type iptables -L like it would be normally. > > I had a few rules saved and working very well before the kernel update however they've suddenly stopped. > Now that I am at the machine, I am able to provide specific output. Here is the command I am using to add the rule to IpTables. iptables -t nat -A PREROUTING -p tcp -i eth1 -s $i 192.168.2.0/24 --dport 80 -d ! 192.168.2.5 -j DNAT --to 192.168.2.5:3128 Ok. and here are the iptables modules currently running. obtained with lsmod | grep -i iptables iptable_nat 24580 1 nf_nat 37420 1 iptable_nat nf_conntrack_ipv4 28816 2 iptable_nat nf_conntrack 84188 3 iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_filter 19840 0 ip_tables 37848 2 iptable_nat,iptable_filter x_tables 37000 4 xt_tcpudp,iptable_nat,ip_tables,ip6_tables When I type iptables -L I get: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination However, here is the output of iptables-save # Generated by iptables-save v1.3.8 on Mon Feb 4 19:00:26 2008 *nat :PREROUTING ACCEPT [142:12487] :POSTROUTING ACCEPT [58:3921] :OUTPUT ACCEPT [58:3921] -A PREROUTING -s 192.168.2.0/255.255.255.0 -d ! 192.168.2.5 -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.5:3128 COMMIT # Completed on Mon Feb 4 19:00:26 2008 # Generated by iptables-save v1.3.8 on Mon Feb 4 19:00:26 2008 *filter :INPUT ACCEPT [13912:6205034] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12125:4299905] COMMIT # Completed on Mon Feb 4 19:00:26 2008 Am I missing something here? Why is the rule I've just created not showing up with iptables -L? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] openSuSe 10.3 hangs after kernel update
by Vahe Avedissian 04 Feb '08

04 Feb '08

I just used YaST to update to the latest kernel (vmlinuz-2.6.22.16-01). I am running openSuSE x64 (AMD) and my machine now hangs early during the boot process with the following message repeated several times: request_module: runaway loop modprobe binfmt-464c I googled this and all I could find was either 32bie ELF file on an x64 bit machine, or a bad/incompatible disk controller driver. I suspect the install did not go correctly. What is the best way to back off or undo the kernel update and revert to the ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] BUG: kernel 2.6.22.16-0.1-default Breaks Atheros Wireless
by David C. Rankin 04 Feb '08

04 Feb '08

Listmates, The latest online update to 2.6.22.16-0.1-default breaks the madwifi driver because the driver kernel modules ath_pci and ath_hal are NOT installed and CANNOT be installed with yast because of conflicts. 01:14 rankin-p35a~> cat linux/yast/wifi_conflicts.txt #### YaST2 conflicts list - generated 2008-01-31 01:09:17 #### This would invalidate atom:kernel-default-2.6.22.16-0.1.i586. atom:kernel-default-2.6.22.16-0.1.i586 has unfulfilled requirements === atom:kernel-default-2.6.22.16-0.1.i586 === kernel-default-2.6.22.16-0.1.i586 provides kernel-default == 2.6.22.16-0.1, but is scheduled to be uninstalled. kernel-default-2.6.22.16-0.1.i586[update] provides kernel-default == 2.6.22.16-0.1, but another version of that package is already installed. Can't satisfy requirement kernel-default >= 2.6.22.16-0.1 for atom:kernel-default-2.6.22.16-0.1.i586 atom:kernel-default-2.6.22.16-0.1.i586 will be evaluated for installation (freshened) by kernel-default-2.6.22.13-0.3.i586[update] (kernel-default == 2.6.22.13-0.3) (null) Conflict Resolution: ( ) delete kernel-default delete atom:kernel-default-2.6.22.16-0.1.i586 #### YaST2 conflicts list END ### Yast's Solution "delete kernel-default". WTF? And..., of course Yast DELETED the working kernel, and my working kernel modules, from my system, so there is no possibility of going back! Bug filed: https://bugzilla.novell.com/show_bug.cgi?id=357514 -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 8

[opensuse] TV tuner: AverMedia Studio 507
by DimitryASuplatov 04 Feb '08

04 Feb '08

Hello everybody! I have Avermedia studio 507 PCI on my PC and I want it working in openSuSE 10.3. I have used automated procedure to install it (through YAST). It works ok with kdetv, though I want it working with more intelligent programs, like tvtime (because I want audio postprocessing). Unfortunately, it does not work with any other programs Ive tried. The picturee I see looks like incorrect video decoding, though I set video scheme default for my country (Moscow, Russia - SECAM video, D/K audio). By the way, what TV program do you prefer? Any suggestions? Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0