July 2003 - openSUSE Users - openSUSE Mailing Lists

SAMBA Problem
by Stephen P. Molnar, Ph.D. 29 Jul '03

29 Jul '03

I have just reinstalled SusE v8.1 on my linux box (last resort to fix a number of problems that have occurred over the past few months). The platform is on a small LAN. Before reinstalling I could connect to the LAN. Now when I attempt to envoke samba I get the following: abnormal:~ # mount -t smbfs abnormal:~ # mount -t smbfs //igor/N /mnt Error connecting to 10.0.0.1 (No route to host) 2082: Connection to igor failed SMB connection failed or abnormal:~ # smbmount //igor/N /mnt Error connecting to 10.0.0.1 (No route to host) 2083: Connection to igor failed SMB connection failed What is the solution to this problem? Thanks in advance.a

5 11

No sound in my headphones :-(
by Tarjei Huse 29 Jul '03

29 Jul '03

Hi, I'm using SUSE 8.2 w/ Alsa on a dell inspiron 8500. After switching from RH to SuSE I now got the strange problem that while my loudspeakers are working ok, I cannot get the PC to switch to using the headphones. If I plug the headphones in, no sound comes out of any speaker. I've tried fiddeling with alsamixer, but with no changes happening. Has anyone encountered this problem before and know how to solve it? Tarjei

5 6

Port forward -For cams-
by Hipolito A. Gonzalez M. 29 Jul '03

29 Jul '03

I installed to Linux with iptables in two office The linux are router with iptables (Ipmasq), Squid, DNS, Firewall and Samba. All is good, but before, They had one computer in each office conected to internet with Real IP, and a card-pci for cams. From the another office, with the Eclipse software (for windows), you put the another IP and you can see the cams in the another office. All is good. and viceversa. Now, I install the linux for sharing the internet in both office, and I want to do an ip forward. Tha manual said: Port 10008, but not TCP or UDP. Only said it. Tha linux boxes has two NIC, one for the internal network and another to the external network. Internal in both places: 192.168.0.0/24 I put it in my firewall script: iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -t filter -A FORWARD -p tcp -s 192.168.0.0/24 -d 0/0 --dport 80 -j DROP iptables -t nat -A PREROUTING -i eth0 (external nic) -p tcp -s (other office's IP) -d (mi real) --dport 10008 -j DNAT --to-destination 192.168.0.2 (internal IP to the computer with Eclipse software) iptables -t nat -A PREROUTING -i eth0 (external nic) -p upd -s (other office's IP) -d (mi real) --dport 10008 -j DNAT --to-destination 192.168.0.2 (internal IP to the computer with Eclipse software) But it doesn't work. I try too: iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -t filter -A FORWARD -p tcp -s 192.168.0.0/24 -d 0/0 --dport 80 -j DROP iptables -t nat -A PREROUTING -i eth0 (external nic) -s (other office's IP) -d (mi real) -j DNAT --to-destination 192.168.0.2 (internal IP to the computer with Eclipse software) I am forwarding all, and the packets are sent in the anohter office to the internal computer, But I belive that the internal computer is not answering. What is happening? Any idea? Thank you!!!

1 0

Internal Pc's can't access services at firewall box !
by edvega＠racsa.co.cr 29 Jul '03

29 Jul '03

Hi guys... I had a SuSE 8.0 box acting as a Firewall (with 2 nics)... it also had installed an Apache Web Server, and my problem is that any of my internal Pc's can't reach any service at the Firewall Box. I setup the Firewall Rules using YaST, and even set to don't protect the Firewall from the internal Network... Any clue of how to setup or modify that box in order to allow internal traffic to legitime services provided by the Firewall on my internal Network ? Thanks !! bye --ed

3 3

unsuscribe
by David Lorenzo 29 Jul '03

29 Jul '03

===== - David - __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com

2 1

sftp
by Erik Jakobsen 29 Jul '03

29 Jul '03

Hi. With my SuSE 8.2, I have succeded using sftp to connect to another computer in the local network here. I have used it in Konqueror. As I run dhcp, I would have used sftp://name_of_computer, but I should put in its dynamic address to get linked with it. What's the reason for that ?. -- Med venlig hilsen - Best regards. Erik Jakobsen - eja(a)urbakken.dk. Licensed radioamateur with the callsign OZ4KK. SuSE Linux 8.2 Proff. Registered as user #319488 with the Linux Counter, http://counter.li.org.

1 0

Gcc-3.3 to gcc-2.95.3
by Donn aka n5xwb Washburn 29 Jul '03

29 Jul '03

SuSE 8.2 I install gcc-2.95.3 and removed gcc-3.3. Kernel 2.5.72 now compiles and runs. It was rather easy to compile and upgrading is enjoyable again. It is available at "http://public.www.planetmirror.com/pub/gnu/" and other places. Look for "gcc-2.95.3.tar.gz" -- 73 de Donn Washburn __ " http://www.hal-pc.org/~n5xwb " Ham Callsign N5XWB / / __ __ __ __ __ __ __ 307 Savoy St. / /__ / / / \/ / / /_/ / \ \/ / Sugar Land, TX 77478 /_____/ /_/ /_/\__/ /_____/ /_/\_\ LL# 1.281.242.3256 a MSDOS Virus "Free Zone" OS Email: n5xwb(a)hal-pc.org Info: http://www.knoppix.net

5 5

KDE Styles
by Jose Thadeu Cavalcante 29 Jul '03

29 Jul '03

Hi, After I install KDE 3.1.2 from SuSE site, my favorite KDE Style (.NET ...) disapear. How can I recover it? Thanks Thadeu

1 0

Worldclock
by Erik Jakobsen 29 Jul '03

29 Jul '03

Hi. Are there a worldclock with SuSE 8.2, as there have been with other versions ?. I mean the program, that shows a worldcard, and the diferent times on the different continents. -- Med venlig hilsen - Best regards. Erik Jakobsen - eja(a)urbakken.dk. Licensed radioamateur with the callsign OZ4KK. SuSE Linux 8.2 Proff. Registered as user #319488 with the Linux Counter, http://counter.li.org.

2 2

tosh utils install problem
by Gedi 29 Jul '03

29 Jul '03

Hi all, I'm trying to install the toshiba utilities app for my tosh laptop. Upon running ./configure I am recieving Gtk+ library errors as follows : (snip..) checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include checking for dnet_ntoa in -ldnet... (cached) no checking for dnet_ntoa in -ldnet_stub... (cached) no checking for gethostbyname... (cached) yes checking for connect... (cached) yes checking for remove... (cached) yes checking for shmat... (cached) yes checking for IceConnectionNumber in -lICE... (cached) yes checking for gtk_main in -lgtk... (cached) no configure: warning: *** GTK+ libraries not found. X code will not be built. *** ./configure: line 1: gtk-config: command not found ./configure: line 1: gtk-config: command not found creating ./config.status creating Makefile creating src/Makefile creating doc/Makefile (..snip) I have the latest version of Gtk+ installed on my machine. Does anyone have any ideas? Thanks

2 2