March 2001 - openSUSE Users - openSUSE Mailing Lists

Which package these libraries belong to?
by Alex Daniloff 24 Mar '01

24 Mar '01

Hello SuSE folkz, Recently I was trying KDE2.1 on SuSE7.0 distro. It didn't work out. After its deinstallation I'm getting these messages from SuSEconfig. Could somebody tell me please what package these missing libraries belong to on which SuSE7.0 CD ROM? /sbin/ldconfig: Input file /usr/X11R6/lib/libXrender.so not found. /sbin/ldconfig: Input file /usr/X11R6/lib/libXv.so not found. /sbin/ldconfig: Input file /usr/X11R6/lib/libXmu.so not found. /sbin/ldconfig: Input file /usr/X11R6/lib/libX11.so not found. /sbin/ldconfig: Input file /usr/X11R6/lib/libXft.so not found. Thank you in advance. Alex -- MS Windows users should be covered under the Americans with Disabilities Act! --------------> Try Linux and you'll understand why <--------------

4 3

Re: [SLE] Linksys LNE100TX NIC
by Terry Eck 24 Mar '01

24 Mar '01

Thanks for the reply, I will be getting the LNE100TX to go along with my BEFSR41. I also want to thank Charles Edwards and Victor Cardona for their reply. Terry "R. Brong" wrote: > > Yes. I have the LNE100TX nic and it works nicely. I recommend the router > befsr41 to go with it. > > Bob > > ----- Original Message ----- > From: <tleck(a)mindspring.com> > To: <suse-linux-e(a)suse.com> > Sent: Friday, March 23, 2001 5:33 PM > Subject: [SLE] Linksys LNE100TX NIC > > > Hello, > > I noticed in the SuSE hardware database a NIC called > > Linksys EtherPIC is listed as supported. Does anyone > > know if the LNE100TX is also supported. The card I'm > > considering is version 2 which has Wakeup on Lan Support. > > I do not plan to use this feature. Will this be a problem > > with the tulip driver. I'm running SuSE 7.1 Linux. > > Thanks > > Terry Eck > > > > -- > > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > > For additional commands send e-mail to suse-linux-e-help(a)suse.com > > Also check the FAQ at http://www.suse.com/support/faq > > > >

1 0

Could not configure OPTi 82C931 sound card through YasT2 alsa config neither alsaconf.
by CassiusVM 24 Mar '01

24 Mar '01

Greetings I tryed to configure the OPTi 82C931 sound card through YasT2 and alsaconf, but I get errors messages from boths. Below is the alsaconf error messages: "Loading driver: Starting sound driver: snd-card-opti93x alsactl: Cannot open configuration file '/etc/asound.conf' ... /lib/modules/2.2.16/misc/snd.o: post-install snd failed /lib/modules/2.2.16/misc/snd.o insmod snd-card-opti93x failed No mixer config in /etc/asound.conf, you have to unmute your card! Setting the PCM volume to 100% and the Master output volume to 80% The ALSA sound driver was not detected in this system Could no initialize the mixer, the card was propably not detected correctly." I'm using SuSE 7.0 Professional. Obs: First, I tryed with the ALSA that came in SuSE CD, after I tryed with the ALSA that I get on SuSE 7.0 Update on SuSE Site. Boths the cases generate the error messages under. Thanks in advance, for any help.

1 0

Cascading numbers with wvdial
by Mike Kenzie 24 Mar '01

24 Mar '01

I'm trying to set up another machine that will use a ISP that has 4 different numbers to connect to. In the past I had each in wvdial and I had to manually select the number I wanted. Does some one have a script that will automatically dial the next number if it gets a busy signal?

1 0

Re: [SLE] ppp problems with WvDial
by Jonathan Drews 24 Mar '01

24 Mar '01

Thanks so much for your help; I discovered that I had sveral default dialers in my wvdial.conf. The fix was to delete wvdial.conf and redo the setup; it now works like a charm. However I cannot get kwvdial to work in kde1. Kinternet works great in both KDE2 and KDE1; any suggestions on getting kwvdial working? On Monday 19 March 2001 03:27, you wrote: > Which kernel are you running? > Ppp setup changed with 2.4.x kernels. > Check /usr/src/linux<version>/Documentation/Changes > > On Monday 19 March 2001 14:06, Jonathan Drews wrote: > > Hi: > > > > I get the following messages when I connect to my ISP. I get low connect > > speeds where as with 7.0 the connect speeds were allways high. I thought > > module char-major-108 had something to do with the sound but the sound > > works great on my box. I am running SuSE 7.1. TIA > > > > Mar 18 19:43:20 linux modprobe: modprobe: Can't locate module ppp0 > > Mar 18 19:46:22 linux modprobe: modprobe: Can't locate module > > char-major-108 Mar 18 20:01:05 linux modprobe: modprobe: Can't locate > > module char-major-108 Mar 18 20:01:52 linux modprobe: modprobe: Can't > > locate module char-major-108 Mar 18 20:03:17 linux modprobe: modprobe: > > Can't locate module char-major-108 -- Cheers, Jonathan

3 2

Re: [SLE] interesting idea
by Raymond Fung 24 Mar '01

24 Mar '01

Dear Flavio, Yes ! I think this is what I am expecting for. Seems I need to check out the VPN "howto" then. Thanks, Raymond. Flavio Arthur Leal Ferreira wrote: > What about this alternative: > > you use freeswan to establish two VPN: > when site1 connects to internet it establishes one VPN with site 3; > when site2 connects to internet it establishes one VPN with site 3; > > site 3 routes traffic to the internal network address (fixed) of site 1 > and 2 > via its corresponding logical VPN interfaces. > > Site 1, when connected, has a route to site2's internal network > address(fixed) > through its logical VPN interface; > > Site 2, when connected, has a route to site1's internal network > address(fixed) > through its logical VPN interface; > > telnets, ..., are made using internal network addresses of the > destination LAN. > > > Raymond Fung wrote: > > I have an interesting idea here, but don't know if it is feasible to > > implement > > nor what kind of tools are needed to implement so. The situation is as > > follow : > > > > There are 3 physically disjointed sites, all are LAN of computers. Two > > of the sites > > (namely site 1 and site 2) connects to the Internet through some > > masquerading / NAT > > device using dial-up connections (thus using dynamic IP and private > > IPs), while the > > third site (site 3) has fixed IP address. Now, computers in site 1 wants > > to telnet > > into computers in site 2. As both sites doesn't have fixed IP, can I > > make use of site > > 3 such that some software is run on a host at site 3 waiting for > > connection from > > computers from site 1 and 2. After the two connection are made, > > something like a VPN > > can be established through this site 3 host to link site 1 and 2 > > together ? It would > > be great if I can do whatever service available (such as ftp, telnet > > etc.) between > > site 1 and site 2. This can be represented as the diagram below :

1 0

test ignore
by Pradeep Sangunni 24 Mar '01

24 Mar '01

test ignore

1 0

abnormal eth0 error
by b stephen harding 24 Mar '01

24 Mar '01

Been recieving these errors, maybe someone could enlighten me. "kernel: eth0: Abnormal interrupt, status 00002002" Thanks b stephen harding Black & White Rhino Press

1 0

Problems with mirror
by Avi Schwartz 24 Mar '01

24 Mar '01

Is mirror broken? Few times now I found that mirror creates files which are larger then the original files (one was over 2M larger!). Avi -- Avi Schwartz Get a Life, avi(a)CFFtechnologies.com Get Linux!

1 0

xfree 4.03
by Mitja 24 Mar '01

24 Mar '01

I tried to downloading XFree 4.03 from SuSE ftp server...uh...it is too slow... Is there any mirror server where are new xfree 4.03 files, please? Mitja

4 3