March 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] acpid requires systemd?
by Felix Miata 25 Apr '24

25 Apr '24

Can this be true? If so, why? Zypper won't let me upgrade acpid without breakage unless systemd is installed too. I have systemd locked out, as I'd rather test things I can understand in Factory, not major overhaul stuff. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

Re: [opensuse-factory] repository priorities with Tumbleweed
by Thomas Langkamp 16 Jul '15

16 Jul '15

> No, please don't confuse people, if you add more repos than just > Tumbleweed you really had better know what you are doing or bad things > can, and will, happen :) I understand. I just would like to add the following to http://en.opensuse.org/Portal:Tumbleweed - between ## is the new stuff: "The only supported method of repo use for Tumbleweed is to have only the main repos (Oss, Non-oss, and Update) and the Tumbleweed repo active. ## If you use more repositorys you have to know how repo-priorities work, but even then Tumblweed does NOT support this ## " It would also be good to move this information to "Special concerns" and to move the whole "Special concerns"-section up. For example "Special Concerns Virtual Machines ... Third Party Drivers ... ## Non-Standard Repos: Only use Oss, Non-oss, and Update combined with the Tumbleweed-Standard repo. Everything else is not supported and might break the system ## " >You do know the legal reasons behind why packman is there, right? Yes. Then I do not whish you personaly to support Packman with TW - I understand now that this is not possible from your perspectivg. But...as the OS community discusses right now if/how to strengthen Tumbleweed... one way would be, that Packman+TW would be supported BY Packman. So I will ask the Packman-guys to do that... I hope this is possible for them. Without Packman Tumbleweed is so ... "anti-multimedia" ;) thanks anyway :D -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 18

[opensuse-factory] Export broken for KinfoCenter
by Roger Luedecke 30 Jan '15

30 Jan '15

Export button is greyed out no matter what. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] YaST2 "install/remove" doesn't display solver diagram
by Kyrill Detinov 13 Jan '14

13 Jan '14

Hello. There is a regression in YaST2 *Qt* "install/remove software" module. It doesn't show solver diagram. First, no dependencies on libqdialogsolver. Second, installed libqdialogsolver doesn't help. Reported ages ago. And confirmed. All the info is provided. https://bugzilla.novell.com/show_bug.cgi?id=785431 WBR Kyrill

3 3

Re: [opensuse-factory] Nothing provides /usr/bin/php5
by Sascha Peilicke 11 Jan '14

11 Jan '14

On 12/01/2011 11:44 AM, Kyrill Detinov wrote: > > Hello. > > We have one package affected in standard repo: leechcraft-eiskaltdcpp. > The program itself doesn't require php5. But the package includes > example scripts with shebang '!/usr/bin/php5'. So the package isn't > installable. > > Also I see the same problem with pgfouine from Contrib (written in > PHP) and eiskaltdcpp from filesharing repo. Maybe more in third-party > repositories. > > Can we have symlink /usr/bin/php -> php5 in php5 package? Or affected > packages should be fixed? > Please file a bug against php5 and assign to Cristian Rodríguez. -- Viele Grüße, Sascha -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] SOLVED: postfix does not run
by Christian Boltz 06 Nov '13

06 Nov '13

Hello, Am Freitag, 22. März 2013 schrieb Patrick Shanahan: > /etc/postfix/main.cf had @_some-parameter_@ setting for every > "xxxxxxx_directory =" line. > > After correcting "xxxxxxxx_directory =" settings per my Tumbleweed > machine, postfix appears working correctly. > > This mess probably occurred on installing/upgrading postfix: > postfix-2.9.6-2.1.x86_64 Sun Mar 10 11:14:39 2013 > but the rpm main.cf does not contain "@.............@". This sounds like https://bugzilla.novell.com/show_bug.cgi?id=796162 which should be fixed since some time. I'd guess some older postfix package broke your main.cf. Nevertheless, if you want to be really sure, uninstall postfix, move away /etc/postfix and re-install the postfix package. Regards, Christian Boltz -- Argh, ich wollte heute doch gar nicht mehr siggen! [Michael Hoffmann in dag°] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] 12.3 RC1 R128 trouble (was: ...install mysteries)
by Felix Miata 12 Jul '13

12 Jul '13

On 2013-02-18 16:40 (GMT+0100) Roger Oberholtzer composed: > I am installing 12.3 RC1 on a machine that happily runs earlier versions > of openSUSE. The graphics is, admittedly, an older ATI Rage XL (MACH64). > It runs as a server, and this is on the MB. It is usually only seen > during install. > The install was a bit of a PITA because, no matter what display I used, > I could not get a graphic install to work. I tried setting various > resolutions and even 'No KMS' in the initial install screen. The screen > would go black, and I could do nothing. No virtual terminals. Nothing. > Eventually I had settle for the text install. Using 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage Mobility M3 AGP 2x (rev 02) here. 11.4 works OK. I installed HTTP started by Grub using latest factory-snapshot with nomodeset on cmdline. Graphical install worked fine, though slow with only 384M RAM, but resulting X is unusable. The left half of the screen is fine, but the right side is a mess, as if there were some kind of buffer misalignment repeating portions and omitting others. Using nomodeset produces mostly black screens with colored lines in various places at various times in attempting to start the login manager, and kills keyboard. Bunch of Xorg.0.log files: http://fm.no-ip.com/Tmp/Linux/Xorg/os123r128/ Anyone looked for a match to any of these upstream R128 bugs? http://tinyurl.com/bz5lfmv I've commented in the last bug in that list. Exiting X makes the system unresponsive to keyboard and mostly empties the screen to black. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Re: What is the purpose of the systemd journal service?
by Linda Walsh 14 May '13

14 May '13

Cristian Rodríguez wrote: > El 15/09/12 11:49, Per Jessen escribió: > >> I do want to log, but I've looked at the journal already and didn't see >> anything that wasn't already in /var/log/messages, /var/log/mail etc. >> Seems like a duplication of effort and a waste of space in >> /var/log/journal. (which afaict can just be deleted). > > It is significantly more powerful than traditional logging: > > For example > > journalctl /usr/bin/foo --> get messages from program foo > > journalctl /dev/sda --> hard-drive problems ? > > journalctl -p error --> only errors > --- I assume the full power of linux's text utilities can be used on them - like grep, sort, awk, perl... vim... Having logs recorded in a non-text binary format tends to make MS logs out-a-sight, out-a-mind, where as I often go and poke around in /var/log and look to see if I notice anything 'new'. If I can't look at the whole stream as a text (messages, warnings, etc), I don't get a field for what is right or wrong behavior and certainly wouldn't be able to pick out an anomaly if I had to query each item separately -- that global view is a good way to look for 'warts'... MS makes it much to painful to do hat -- 1 error / page, everything in 300 separate queries ... ug! > Currently it is not a full replacement for syslog but I suggest you to > check it out. > I tend to use ngsyslog for the filtering benefits. -- really has some powerful filtering in the 2.x line -- had to label ng3x taboo, so it won't overwrite a working config with a non working config... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

27 129

[opensuse-factory] t1lib droppable?
by pgajdos＠suse.cz 18 Apr '13

18 Apr '13

Hi list, let us consider removing t1lib from factory. t1lib is unmaintained, see e. g.: CVE-2010-2642 CVE-2011-1552 CVE-2011-1553 CVE-2011-1554 CVE-2011-0433 Packages which requires t1lib for build in factory: evince texlive VFlib3 evince and VFlib3 could perhaps drop --with-t1lib configure switch, texlive could either use its own copy or drop support as well -- it appears from code that it uses t1lib as fallback if freetype2 can't handle given font. Opinions? Do you see any drawbacks? Thanks, Petr

4 5

[opensuse-factory] Tumbleweed, future directions
by Greg KH 10 Apr '13

10 Apr '13

Hi all. So Tumbleweed is, I think, almost 2 years old now. It seems to be working fairly well, or at least well enough for my daily use, and I haven't heard any complaints about it in a long time which means that either no one is using it, or it's working for others :) Anyway, with the advent of 12.3 soon, I have been thinking if Tumbleweed needed to change any to make things work better. My original set of complaints a year or so ago about OBS issues that keep us having a "proper" rolling distribution, still pretty much are the same: - the build-number issue - build speed - dependancy rebuild problems. Build speed of OBS has increased recently, I don't know if it's just my imagination, or if I have a higher priority for my repos now, or if new hardware really was added to the build system, but I'm happy things seem to be working better in that area at the moment. But the other two issues are still big ones, as the recent GNOME update in Tumbleweed proved quite well. So, I was thinking about maybe, when 12.3 changing Tumbleweed from being an "add-on" repo on top of the 12.3 repos, to being a "full" distro snapshot. That would resolve the build number problems we have had, but the dependancy rebuild issue would increase. The rebuild problem can be manually handled, much like FACTORY currently is, but odds are, I would lean toward the conservative side, having more rebuilds than are probably necessary just to ensure that systems work well. That means that libreoffice would be updated on a weekly basis for users, which might get annoying over time :) Any thoughts by anyone about this? Or should I just do it and see how well it works out? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

15 24

[opensuse-factory] after dup fro 12.2 to 12.3 grub menu still 12.2
by Daniele 05 Apr '13

05 Apr '13

Hi guys, I'm not a big fun of zypper dup but I did it ! New system is up and running but grub menu still show 12.2 instead of 12.3. Under Yast, boot loader options: Distributor and Default section -> openSUSE 12.2 Is a known issue ? worth a bugreport ? Better way to fix menu entry ? I never touched grub 2 configuration files... Daniele. -- *** Linux user # 198661 ---_ ICQ 33500725 *** *** Home http://www.kailed.net *** *** Powered by openSUSE *** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 15

[opensuse-factory] Multiple repos during installation?
by Andrey Borzenkov 05 Apr '13

05 Apr '13

Is it possible to use multiple repo (like primary and update) during installation? I do not see where I can add them in installer. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

13 30

[opensuse-factory] 'su' seems to ignore "-p" (preserve environment)... in factory...
by Linda Walsh 03 Apr '13

03 Apr '13

Plays havoc with my remoteX stuff... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 44

[opensuse-factory] 'which' missing from 'base build root'
by Dimstar / Dominique Leuenberger 02 Apr '13

02 Apr '13

Hi all, What a nice surprise I had to see this morning: some 'old' package (last touched > 12 months ago) suddenly fails to build.. Builderror? -bash: which: command not found yes, right: which was split out into a sep. package. No consideration or pre-announcement was done (or I missed it). And to make the whole story fun: BuildRequires: which => unresolvable: nothing provides which great stuff! I think everybody would appreciate if such fundamental changes, if not handled transparently, would be communicated upfront. As a wrapup: the 'submit' came in with: https://build.opensuse.org/request/show/161218 The submitter added as submit text: "Please wait for which, adjtimex, time to go in first since those packages have been split from util-linux." * Are we (packagers) now supposed to add BuildRequires: which to whatever uses it (I don't object it.. but where does it stop?) * When can we expect 'which' to actually appear in Factory, so that builds are possible again? Best regards, Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 20

[opensuse-factory] Proposal for new Bugzilla category
by Robert Schweikert 02 Apr '13

02 Apr '13

Hi developers, Yes, as a rare occasion a mail from the board on the factory list. The board has been approached about consideration of a new Accessibility (a11y) category in Bugzilla. While this is a technical issue, this specific technical issue carries with it a large community component and thus after discussion during the last board call we felt it was appropriate to approach the developer community with the proposal outlined below. We have weight both pros and cons for adding a new category in Bugzilla. The summary of the board discussion is available in the meeting minutes of the board call from 2013-03-25 (https://en.opensuse.org/openSUSE:Board_meeting#Meeting_2013-03-25) Proposal: Add an Accessibility category to Bugzilla Accessibility bugs should be treated as major bugs, even issues that may appear small or minor to non handicapped users may have a profound effect on users that depend on a11y technology. It is preferable that accessibility fixes get released as updates in the current distribution. We do not have a dedicated team to address a11y bugs, thus the regular development teams and package maintainers are responsible for fixing a11y issues, just as they are today. However, these bugs will likely have a higher priority assignment than they have today. ========= The board is in favor of having an accessibility category in Bugzilla. However, ultimately this is a decision that rests with the development community. If there is no clear consensus within the developer community the board would appreciate if the release team could reach a conclusion and post a decision to the list. The developer community and release team may of course consider alternate proposals or work flows to address this expressed need. We would very much appreciate if you would consider this request and discuss the issue. Thank you, Your openSUSE Board -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 12

[opensuse-factory] Problems with VMware-Workstation
by James PEARSON 31 Mar '13

31 Mar '13

Hello all I am hoping that someone can provide me with some advice about the missing header.h file issue I am encountering when trying to install VMware-Workstation on V12.3 # Issue When VMware-Workstation starts and tries to compile its required internal modules I get the following error: C header files matching your running kernel were not found. # How to reproduce I did a fresh installation of v12.3 x86_64 this morning using the openSUSE-12.3-DVD-Build0094-x86_64.iso Then I did a zypper up and tried to install the lastest version of VMware-Workstation (VMware-Workstation-Full-9.0.1-894247.x86_64.bundle) # Comments As I recall in order to build an out-of-kernel driver, you need to have the proper kernel headers installed. kernel-desktop-devel-3.7.9-1.1.2.x86_64 is installed but /lib/modules/3.7.9-1.1-desktop/build/include/linux/version.h does not exist in the same place as on V12.2 Has the "linux/version.h" changed directories or do I need to install another programme in order to get it? VMware-Workstation works fine on V12.2 and I have compared V12.3 and V12.2 below ############### V12.3 ############### # [3.7.9-1.1-desktop] VMware-Workstation installation programme : START... # OS Info: Linux M2N32 3.7.9-1.1-desktop #1 SMP PREEMPT Thu Feb 21 16:15:10 UTC 2013 (8dec968) x86_64 x86_64 x86_64 GNU/Linux # Listing the versions of installed packages... kernel-source-3.7.9-1.1.2.noarch kernel-desktop-3.7.9-1.1.2.x86_64 kernel-desktop-devel-3.7.9-1.1.2.x86_64 gcc-4.7-7.1.1.x86_64 make-3.82-154.1.1.x86_64 gcc-c++-4.7-7.1.1.x86_64 # Making sure that the kernel headers exist before installing VMware... # /lib/modules/3.7.9-1.1-desktop/build/include/linux/version.h ERROR: /lib/modules/3.7.9-1.1-desktop/build/include/linux/version.h was not found... ############### V12.2 ############### # [3.4.28-2.20-desktop] VMware-Workstation installation programme : START... # OS Info: Linux Sabertooth 3.4.28-2.20-desktop #1 SMP PREEMPT Tue Jan 29 16:51:37 UTC 2013 (143156b) x86_64 x86_64 x86_64 GNU/Linux # Listing the versions of installed packages... kernel-source-3.4.28-2.20.1.noarch kernel-desktop-3.4.28-2.20.1.x86_64 kernel-desktop-devel-3.4.28-2.20.1.x86_64 gcc-4.7-2.1.1.x86_64 make-3.82-151.1.2.x86_64 gcc-c++-4.7-2.1.1.x86_64 # Making sure that the kernel headers exist before installing VMware... # /lib/modules/3.4.28-2.20-desktop/build/include/linux/version.h # Checking to see if /lib/modules/3.4.28-2.20-desktop/build/include/linux/version.h exists... /lib/modules/3.4.28-2.20-desktop/build/include/linux/version.h exists... All comments welcome TIA James -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 7

[opensuse-factory] Broken factory repo
by Jiri Slaby 30 Mar '13

30 Mar '13

Hi, for a couple of days I'm seeing factory repo broken. Is this expected? Checking whether to refresh metadata for factory-oss Retrieving: http://download.opensuse.org/factory/repo/oss/content [done] Retrieving: http://download.opensuse.org/factory/repo/oss/media.1/media [done] Retrieving: http://download.opensuse.org/factory/repo/oss/content [done] Retrieving: http://download.opensuse.org/factory/repo/oss/media.1/media [done] Retrieving: http://download.opensuse.org/factory/repo/oss/media.1/media [done] Retrieving: http://download.opensuse.org/factory/repo/oss/content.asc [done] Retrieving: http://download.opensuse.org/factory/repo/oss/content.key [done] Retrieving repository 'factory-oss' metadata [error] Repository 'factory-oss' is invalid. [|] Valid metadata not found at specified URL History: - File /var/tmp/TmpFile.51yVt5 doesn't contain public key data Please check if the URIs defined for this repository are pointing to a valid repository. Warning: Disabling repository 'factory-oss' because of the above error. # zypper lr factory-oss Alias : factory-oss Name : factory-oss URI : http://download.opensuse.org/factory/repo/oss/ Enabled : Yes Priority : 99 Auto-refresh : On Keep Packages : Off Type : yast2 GPG Check : On GPG Key URI : Path Prefix : Parent Service : MD Cache Path : /var/cache/zypp/raw/factory-oss thanks, -- js suse labs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] auditing what process forked binary X ?
by Cristian Rodríguez 28 Mar '13

28 Mar '13

Hi: In about 3 machines I have the following annoying log message: modprobe[1062]: FATAL: Error inserting padlock_sha (/lib/modules/3.9.0-rc3-1-desktop/kernel/drivers/crypto/padlock-sha.ko): No such device This means: - Something is forking modprobe and trying to probe a module that is not going to ever work in the machines, since they have no VIA processors. - It should not be doing that and has to be stopped :-) the module will load automatically if the running system matches x86cpu:vendor:*:family:*:model:*:feature:*00AA* - It is not systemd, udev or any of the service files. - It is also not any of the few remaining legacy sysvinit scripts. - It is not a custom configuration. - I suspect it might be Networkmanager but have no evidence to prove it. Is there any way to know "what process forked modprobe" using the audit subsystem or any other facility ? thanks. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 19

[opensuse-factory] lua v5.2 & v5.1 coexistence -- separate -devel/headers should be allowed
by darx＠sent.com 27 Mar '13

27 Mar '13

Default lua install on 12.3/Factory is v5.2, rpm -qa | grep -i lua | sort liblua5_2-5.2.1-2.2.1.x86_64 lua-5.2.1-62.1.x86_64 lua-devel-5.2.1-2.2.1.x86_64 lua-doc-5.2.1-2.2.1.noarch It is installed with alternatives support, update-alternatives --list lua /usr/bin/lua5.2 Attempt to co-install lua51 requires *deinstall* of lua 52 devel, zypper in lua51 lua51-devel lua51-doc Loading repository data... Reading installed packages... Resolving package dependencies... Problem: lua51-devel-5.1.5-2.1.3.x86_64 conflicts with lua-devel provided by lua-devel-5.2.1-2.2.1.x86_64 Solution 1: deinstallation of lua-devel-5.2.1-2.2.1.x86_64 Solution 2: do not install lua51-devel-5.1.5-2.1.3.x86_64 Choose from above solutions by number or cancel [1/2/c] (c): Lua v51 & v52 headers represent different lua API. E.g., luajit build (from upstream) requires 5.1 API. The lua v51 & v52 app & devel packages should install in separate namespaces, and be selectable with update-alternatives. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 11

[opensuse-factory] Adding "Wine" YAST Pattern?
by Trent Hawkins 27 Mar '13

27 Mar '13

Hi Factory, I'm busy playing with 12.3 release. Unfortunately Crossover stopped playing nicely with openSUSE sometime last year and requires a bit of mucking around with dependencies. See this thread here for more details: http://forums.opensuse.org/english/get-technical-help-here/applications/484… Codeweavers themselves said: "Unfortunately we no longer support Crossover 12.x on Opensuse 12.x because of all the missing libraries in the distro and other issues like you're seeing. We gave up after Crossover 11.3 because trying to keep Crossover installing and running correctly on OpenSuse was like playing whack-a-mole and as soon as we would fix for one missing library another would disappear, be moved, or renamed." Anyway i've had problems with 12.2 and 12.3 on 64 bit installing all the necessary dependencies to make Crossover run. Now i can get it to work by installing all the dependencies listed here: http://wiki.winehq.org/Recommended_Packages and here http://wiki.winehq.org/WineOn64bit, but this is a bit cumbersome. Therefore i was wondering what the possibility might be of having a new Pattern in Yast Software Management for "Wine/Crossover" which i can click to get all the necessary dependencies in one go? Obviously this is a longer term request, so i'm just putting it out there for people's opinions. Cheers, Trent -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 14

[opensuse-factory] gcc 4.8
by Alin M Elena 26 Mar '13

26 Mar '13

Hi, With gcc 4.8 in factory now... shall we make a staging repo to see what needs fixed in order to make 4.8 default? regards, Alin -- Without Questions there are no Answers! ______________________________________________________________________ Alin Marin ELENA Advanced Molecular Simulation Research Laboratory School of Physics, University College Dublin ---- Ardionsamblú Móilíneach Saotharlann Taighde Scoil na Fisice, An Coláiste Ollscoile, Baile Átha Cliath ______________________________________________________________________

3 2

Re: [opensuse-factory] Adding "Wine" YAST Pattern?
by Trent Hawkins 26 Mar '13

26 Mar '13

On 26 March 2013 11:50, Patrick Shanahan <paka(a)opensuse.org> wrote: > > * Trent Hawkins <trent.hawkins83(a)gmail.com> [03-25-13 20:17]: > > I'm busy playing with 12.3 release. > > Which is released and discussed on opensuse, rather than factory. Yep. I was just curious about this being a possibility now that SUSE is no longer supported by Crossover. Happy to post tech questions relating to 12.3 in the forums > > > Unfortunately Crossover stopped playing nicely with openSUSE sometime > > last year and requires a bit of mucking around with dependencies. > > I have crossover 12.1.0 running on 12.3 x86_64 (Tumbleweed) w/o and probs > that I can see, installed via zypper. Tumbleweed? Already? > > > See this thread here for more details: > > > > > > http://forums.opensuse.org/english/get-technical-help-here/applications/484… > > > > Codeweavers themselves said: > > > > "Unfortunately we no longer support Crossover 12.x on Opensuse 12.x > > because of all the missing libraries in the distro and other issues like > > you're seeing. We gave up after Crossover 11.3 because trying to keep > > Crossover installing and running correctly on OpenSuse was like playing > > whack-a-mole and as soon as we would fix for one missing library another > > would disappear, be moved, or renamed." > > > > Anyway i've had problems with 12.2 and 12.3 on 64 bit installing all > > the necessary dependencies to make Crossover run. Now i can get it to > > work by installing all the dependencies listed here: > > http://wiki.winehq.org/Recommended_Packages and here > > http://wiki.winehq.org/WineOn64bit, but this is a bit cumbersome. > > I did *not* go outside "zypper in ./crossover" to find and/or install > *any* dependencies that were not automagically installed by zypper. Stupid question i know, but i am I assume you installed the rpm (not explicitly stated) Trent -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Installation started from inside Windows - does it work?
by Carlos E. R. 25 Mar '13

25 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 At <http://doc.opensuse.org/documentation/htmlsingle/openSUSE/opensuse-referenc…> it documents a method to start the 12.3 installation from inside Windows. Apparently it runs an install.exe, that modifies the Windows start sequence so that next boot happens from the DVD. Has this method been verified? In particular regarding Windows 8 and UEFI. IMHO, this method should be removed from the installation media and documentation. (I post this intentionally in the factory mail list in order to reach the developers that created the DVD and the documentation) You can see a recent sample of an installation using this method here: <http://forums.opensuse.org/showthread.php?t=484820> - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEARECAAYFAlFQXbMACgkQtTMYHG2NR9UUZgCgjohd+nhDLNUoLPlpssSQxM4V vAEAnRaj6AgnAg0MjEof/oGsjeRW3EBV =qp1j -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] No active session after GNOME login/no ACLs are applied
by Andrey Borzenkov 25 Mar '13

25 Mar '13

It may be related to various problems with sound etc that were reported. I just found that there is no active session from the logind PoV so no ACL is applied so no access to devices. https://bugzilla.novell.com/show_bug.cgi?id=811185 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Next release?
by Thomas Taylor 24 Mar '13

24 Mar '13

Any word yet on what the next release will be? Is there a link yet? Thanks, Tom -- "Anyone who stops learning is old, whether at twenty or eighty." Henry Ford -- Tom Taylor - retired penguin AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 12.2-x86_64 openSUSE 12.3-x86_64 KDE 4.7.2, FF 7.0 KDE 4.10.00, FF 19.0 claws-mail 3.9.1 registered linux user 263467 KG7CFC - 2 meter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] Libgee 0.9.92 to enter Factory soon
by Dimstar / Dominique Leuenberger 22 Mar '13

22 Mar '13

Hi all, Together with the efforts of pushing GNOME 3.8 to Factory soon, I will prepare with the submission of libgee 0.9.92. There are some confusions there that I would like to address beforehand: libgee 0.6.x shipped gee-1.0.pc since libgee 0.7.x, the .pc file stepped 'back' to gee-0.8.pc gee-0.8 in this case is newer than gee-1.0, and a conscious decision by upstream (it's not a version per se, rather a API version). The packages in the GNOME stack are already prepared for this, but there might be more packages not playing nice there yet. Those will need to be patched, hopefully together with upstream. the bare minimum is to change configure(.ac) to detect the right pkgconfig file (gee-0.8 instead of gee-1.0). Should there REALLY be a need to keep gee 0.6 alive for a short while, then I would be willing to maintain that but also would want to work towards a drop of this extra package prior to the next release... Without voices, gee 0.9.92 (gee-0.8) will be the only one alive within short time. Best regards, Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] postfix does not run
by Patrick Shanahan 22 Mar '13

22 Mar '13

Factory in a VBox (oracle 4.2.10) postfix will not start with following error: 23:17 crash-Fact: ~ # rcpostfix status Checking for service Postfix: postfix.service - Postfix Mail Transport Agent Loaded: loaded (/usr/lib/systemd/system/postfix.service; enabled) Active: failed (Result: exit-code) since Thu, 2013-03-21 23:15:58 EDT; 1min 31s ago Process: 3130 ExecStart=/usr/sbin/postfix start (code=exited, status=1/FAILURE) Process: 3117 ExecStartPre=/etc/postfix/system/update_postmaps (code=exited, status=0/SUCCESS) Process: 3114 ExecStartPre=/etc/postfix/system/update_chroot (code=exited, status=0/SUCCESS) Process: 3111 ExecStartPre=/etc/postfix/system/config_postfix (code=exited, status=0/SUCCESS) Process: 3108 ExecStartPre=/bin/echo Starting mail service (Postfix) (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/postfix.service Mar 21 23:15:53 crash-Fact.wahoo.no-ip.org postfix/postmap[3124]: fatal: file /etc/postfix/main.cf: parameter setgid_group: unkno...oup@ Mar 21 23:15:54 crash-Fact.wahoo.no-ip.org update_postmaps[3117]: postmap: fatal: file /etc/postfix/main.cf: parameter setgid_gro...oup@ Mar 21 23:15:54 crash-Fact.wahoo.no-ip.org postfix/postmap[3125]: fatal: file /etc/postfix/main.cf: parameter setgid_group: unkno...oup@ Mar 21 23:15:55 crash-Fact.wahoo.no-ip.org update_postmaps[3117]: postmap: fatal: file /etc/postfix/main.cf: parameter setgid_gro...oup@ Mar 21 23:15:55 crash-Fact.wahoo.no-ip.org postfix/postmap[3126]: fatal: file /etc/postfix/main.cf: parameter setgid_group: unkno...oup@ Mar 21 23:15:56 crash-Fact.wahoo.no-ip.org update_postmaps[3117]: postalias: fatal: file /etc/postfix/main.cf: parameter setgid_g...oup@ Mar 21 23:15:56 crash-Fact.wahoo.no-ip.org postfix/postalias[3127]: fatal: file /etc/postfix/main.cf: parameter setgid_group: unk...oup@ Mar 21 23:15:57 crash-Fact.wahoo.no-ip.org postfix[3130]: fatal: file /etc/postfix/main.cf: parameter setgid_group: unknown grou...roup@ Mar 21 23:15:58 crash-Fact.wahoo.no-ip.org systemd[1]: Failed to start Postfix Mail Transport Agent. Mar 21 23:15:58 crash-Fact.wahoo.no-ip.org systemd[1]: Unit postfix.service entered failed state I have not had this VBox running for several days. Do not know when problem started. Do not know where to turn. tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] various packages have bad bash-code in the complete-routines...list included:
by Linda Walsh 21 Mar '13

21 Mar '13

The following files in /etc/bash.completion.d have bad "bash shell script" wireless-tools, pgrep pkill pkg_install mii-diag kldload ipsec ifupdown _gcc/gcc They all seem to use a single square bracket with a variable name that is not quoted. Either have to use double square brackets OR quote your varnames, otherwise, [ $USERLAND = GNU ] becomes [ = GNU ] when USERLAND isn't defined -- the others have similar problems that all manifest upon login: -bash: [: too many arguments -bash: [: =: unary operator expected -bash: [: =: unary operator expected -bash: [: =: unary operator expected -bash: [: =: unary operator expected -bash: [: too many arguments -bash: [: =: unary operator expected -bash: [: =: unary operator expected -bash: [: =: unary operator expected -bash: [: =: unary operator expected -bash: [: =: unary operator expected -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Fwd: [opensuse-project] Packaging Kolab.org Groupware
by Jos Poortvliet 20 Mar '13

20 Mar '13

Not everybody is on -project, so I thought it's worth to share this here. As Georg Greve said in his talk at the last openSUSE Conference: Groupware is the last of the three pillars of modern IT which Free Software isn't covering very well (we've got Browsers and Office nailed). Kolab is the only real free and open solution out there, and it's an incredibly good one. But the downside is that it is big and not easy to deploy - that's where good, quality packages matter. So, if you care about groupware & server things and want to do a service to Software Freedom, chipping in here would really make a difference! And if you're looking for a Groupware solution at your job or for a client - consider Kolab over the less-open (or closed) stuff, it's good AND a proper Free Software project. ---------- Forwarded Message ---------- Subject: [opensuse-project] Packaging Kolab.org Groupware Date: Wednesday 20 March 2013, 17:49:44 From: Torsten Grote <grote(a)kolabsys.com> To: opensuse-project(a)opensuse.org Dear all, you might have heard that the truly Free Software Groupware Kolab has been released recently in version 3 and has undergone a major rewrite. It supports several native clients and now also mobile phones with ActiveSync. Soon there will also be CalDAV and CardDAV support. So you'll have all freedom to synchronize your personal data across all your devices without relying on big 'cloud' providers. The old Kolab 2 had been packaged for OpenSUSE, but is totally outdated now. Aeneas Jaißle restarted the packaging efforts for Kolab 3 and has made amazing progress. Everything is packaged and can be installed right away. Thanks Aeneas! You can read more about the progress and the current state of the packages in Aeneas' blog [1]. We are still looking for more people who could test the packages and provide feedback. If somebody wants to help with packaging that would even be more awesome. Some little help can already have a big impact and take some weight off of Aeneas' shoulders. You'll find the packages at the OpenSUSE Build Service [2] [3]. Some more outdated information is in the OpenSUSE wiki [4]. If somebody could help bring this up to date, this would be very much appreciated. If you like to get in touch with Aeneas, you'll find him at OBS [5]. And if you haven't tried out Kolab yet, you probably should. There is a public demo [6] if you just want to take a quick look. Kind Regards, Torsten [1] https://kolab.org/blogs/aeneas-jai%C3%9Fle [2] https://build.opensuse.org/project/show?project=server%3AKolab%3AUNSTABLE [3] https://build.opensuse.org/project/show?project=server%3AKolab%3AExtras [4] https://en.opensuse.org/SDB:Kolab [5] https://build.opensuse.org/home?user=aeneas_jaissle [6] https://MyKolab.com -- To unsubscribe, e-mail: opensuse-project+unsubscribe(a)opensuse.org To contact the owner, email: opensuse-project+owner(a)opensuse.org -----------------------------------------

4 6

[opensuse-factory] rpmlint: warn if -ansi is used to build packages
by Cristian Rodríguez 19 Mar '13

19 Mar '13

Hi: Will be cool if rpmlint could warn when upstream packages attempt to use the -ansi gcc option because it inhibits usage of gcc builtin functions while optimizing (list here --> http://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#Other-Builtins) most recently it caught my attention that it also disables the new "optimize-strlen" pass in gcc 4.7, in particular this: "for hosted compilations where stpcpy is available in the runtime and headers provide its prototype, e.g. void foo (char *a, const char *b, const char *c, const char *d) { strcpy (a, b); strcat (a, c); strcat (a, d); } can be optimized into: void foo (char *a, const char *b, const char *c, const char *d) { strcpy (stpcpy (stpcpy (a, b), c), d); } " when -ansi is used and (defined(_GNU_SOURCE) || (_XOPEN_SOURCE >= 700 || _POSIX_C_SOURCE >= 200809L)) is false, there is no stpcpy prototype and hence no optimization. Thoughts ? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 28

[opensuse-factory] no sound with kernel3.9rc2
by Alin M Elena 19 Mar '13

19 Mar '13

Dear All, I hope the celebration for 12.3 release is over and you are ready to roll the factory. I was playing with kernel 3.9.rc2 form KH and I had the unpleasant surprise to find myself without sound... With 3.8.2 kernel and prior everything is ok. I have pasted links to the alsa-info.sh outputs and attached the kernel log for both cases. no sound http://www.alsa-project.org/db/?f=75737f80ac2a65b7b3e0a39e7cb1330335c72def works http://www.alsa-project.org/db/?f=9b80d10ef648afb39e9d87a2c57fd8d112b138b7 regards, Alin -- Without Questions there are no Answers! ______________________________________________________________________ Alin Marin ELENA Advanced Molecular Simulation Research Laboratory School of Physics, University College Dublin ---- Ardionsamblú Móilíneach Saotharlann Taighde Scoil na Fisice, An Coláiste Ollscoile, Baile Átha Cliath ----------------------------------------------------------------------------------- http://alin.elenaworld.net ______________________________________________________________________

8 24

[opensuse-factory] Kernel panic and no adsl with 12.3
by Juan Erbes 19 Mar '13

19 Mar '13

Today I installed the 12.3 final version, after 2 days of downloading the iso. The first impresion was good, compared with 12.2, at least the installer selected the right system partition, because I hatte in a partition 12.2 and in other 12.1, and it selected the 12.1 partitio to format and install on it. The Grub installer and the first boot worked fine, but the problem apeared in the automatic configuration, because at 85% I got a kernel panic, and any time I rebboted and go to the automatic configuration receibed the kernel panic. The only way to get the system aup, was cancelling the the automatic configuration. The other problem, is with Yast and the adsl module, it requested to install the smpppd package, and it was installed from the dvd, but do'nt find a way to get the adsl device up, to connect to internet. I'm using now the 12.2 version They are a 2 years old bug about this problem, and never resolved for the first install, because one must try to install some packages experimenting with some times with a package from the before version of the distribution, until get the adsl connection up: https://bugzilla.novell.com/show_bug.cgi?id=721872 I attached the /var/log/warn file Thanks, Juan -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/

3 7

[opensuse-factory] openSUSE 12.3 A Fine Release!
by Trent Hawkins 18 Mar '13

18 Mar '13

Well SUSE team you've done a stirling effort with 12.3! Just booted up RC2 to find that my bug in Beta and RC1 where incorrect power stats where provided has been squashed - https://bugzilla.novell.com/show_bug.cgi?id=804197 linux@linux:~> acpi -V Battery 0: Discharging, 65%, 01:57:34 remaining Battery 0: design capacity 5600 mAh, last full capacity 5055 mAh = 90% Adapter 0: off-line Thermal 0: ok, 51.5 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 99.0 degrees C Cooling 0: Processor 0 of 3 Cooling 1: Processor 0 of 3 Cooling 2: Processor 0 of 3 Cooling 3: Processor 0 of 3 Cooling 4: LCD 6 of 15 Cooling 5: LCD 6 of 15 Now the only persistent bug is in vgaswitcheroo, which seems to be confined to the 3.7.xxx kernel series. I have updated my openSUSE 12.2 Tumbleweed install to 3.8 Kernel Desktop and found that vgaswitcheroo now successfully switches off my discrete AMD GPU. If switcheroo was working correctly i would expect the above command to provide a battery time estimate of > 5 hours. I'm not suggesting this is a problem that needs to be dealt with, this will be resolved on the next Kernel update. A few other comments: 1. I noticed that the boot time of the KDE Live image was fast! 2. I like the artwork, although have to get used to dark theme. 3. The KDE live image has a great selection of applications, including Libreoffice and Digikam. I won't need to download the full DVD now. Thanks again, Trent -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 9

[opensuse-factory] Heads-up: uaccess/ACLs broken (no sound, no bluetooth....)
by Stefan Seyfried 18 Mar '13

18 Mar '13

Hi, as a heads up: factory seems to have problems with the uaccess-tag in undev-rules adding ACLs to devices for the logged in users. In my case, bluetooth-applet was not showing up (no permission on /dev/rfkill) and sound did not work (only dummy output in pavucontrol available). https://bugzilla.novell.com/show_bug.cgi?id=809918 The quick "fix" for me was (as root, after logging in) chown seife /dev/rfkill /dev/snd/* have fun, seife -- Stefan Seyfried "If your lighter runs out of fluid or flint and stops making fire, and you can't be bothered to figure out about lighter fluid or flint, that is not Zippo's fault." -- bkw -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Google calendar not functioning under OS 12.3-GM
by Thomas Taylor 18 Mar '13

18 Mar '13

I finished installing OS 12.3-GM yesterday and find that the Google calendar is not being displayed, just a blank screen. The display was working under OS 12.3-RC2 and previous. The other categories under Google appear to be displayed correctly. When I reboot to windblows the calendar is displayed but not like it was a couple of days ago. I'm wondering if Google made ANOTHER change (improvement??) to their calendar or if there was a change from OS 12.3-RC2 to OS 12.3-GM? I'm using the same Nvidia Linux driver that I had previously (310.40) so that's not the problem. Thanks, Tom -- "Celebrate what you've accomplished, but also raise the bar a little each time you succeed", Mia Hamm -- Tom Taylor - retired penguin AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 12.2-x86_64 openSUSE 12.3-x86_64 KDE 4.7.2, FF 7.0 KDE 4.10.00, FF 19.0 claws-mail 3.9.1 registered linux user 263467 linxt-At-comcast-DoT-net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] Instructions on the wiki for creation a USB bootable stick may be wrong for 12.3
by Carlos E. R. 18 Mar '13

18 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 At <http://en.opensuse.org/Live_USB_stick#Linux_instructions_3> it says: +++·································· Bootable USB from DVD or Net-install ===================================== Download one of the DVD or Net Installation images from http://software.opensuse.org/ Linux instructions - ------------------- Install syslinux/isohybrid - --------------------------- If you would like to boot the from a USB stick then you can make the ISO bootable by installing syslinux. # zypper in syslinux # isohybrid openSUSE-12.1-DVD-x86_64.iso Once completed just follow whichever set of above LiveUSB instructions you like, and take care to read the Booting from USB-DVD section below afterward. ··································++- Apparently running isohybrid breaks booting (the iso contains two partitions, on a GPT structure, for use with UEFI). Those instructions in the wiki should be corrected. Reference: <http://forums.opensuse.org/english/get-technical-help-here/pre-release-beta…> I can attest that the USB stick (DVD image) without isohybrid boot fine in my BIOS only laptop. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlEzcHIACgkQja8UbcUWM1wDvwD/S40Q25CNeVoVxM7qQqMh8ZvZ m74jUcTNuaVbXYttZvIA/3mGtUUhOFqR7ywAATBJtEVmfM6UVmo4WdR6eaSBs0CG =FFBF -----END PGP SIGNATURE-----

12 23

[opensuse-factory] Tumbleweed
by Basil Chupin 18 Mar '13

18 Mar '13

I want to install and try out Tumbleweed. I finally found a reference on the 'net to Tumbleweed which pointed to http://en.opensuse.org/Portal:Tumbleweed I started to read this but after several seconds wondered if what was written there is latest - afterall it talks about oS 12.1, with 12.3 "just around the corner". Is there a more uptodate info on how to install Tumbleweed? (I guess that I am correct to assume that one first installs a stock-standard version of oS and then 'massages' it to do a 'dup --from....' to get Tumbleweed?) BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.1-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] "does not contain desired medium" with tumbleweed update
by Andi Kleen 18 Mar '13

18 Mar '13

Hi, I'm trying to "dup" a Tumbleweed system to the latest and greatest. But always get now (even after refreshing repositories) Retrieving package branding-openSUSE-12.2-11.6.15.noarch (1/496), 10.0 KiB ( 2.0 KiB unpacked) Media source 'http://download.opensuse.org/distribution/openSUSE-current/repo/oss/' does not contain the desired medium similar for other packages. I presume it still looks for 12.2, but 12.3 is already there? Is there a workaround? Thanks, -Andi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] repo stats
by Ilya Chernykh 18 Mar '13

18 Mar '13

Repo statistics were removed by coolo. Was it replaced by anything? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] RFC: new package python-pika for Factory
by Matwey V. Kornilov 17 Mar '13

17 Mar '13

Hi, This mail to discuss submitting python-pika (devel project is devel:languages:python) to Factory. python-pika is the most famous python package to develop AMQP client applications and thought as of python-client library for RabbitMQ. rabbitmq-server is already a part of Factory. This way submitting of python- pika may be considered as improvement of support of AMQP in openSUSE. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Tumbleweed: NV34 card scrmables colors after update
by Achim Gratz 17 Mar '13

17 Mar '13

I have an old computer with an FX5200 AGP card. I've tried to update it this weekend to the latest Tumbleweed and the colors in X are all scrambled. Only the colors are wrong and it looks like the order of the bits is reversed or something: the tinier the expected color variation, the more drastic the actual result. I can't find any parameter that seems to influence that and searching the bugbase has also come up empty. Does somebody has an idea of what to try? Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Samples for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldSamplesExtra -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 5

Re: [opensuse-factory] no sound with kernel3.9rc2
by Alin Marin Elena 16 Mar '13

16 Mar '13

Yes is normal... I have headphones plugged in. tried the command by hand... there is no change... i have tried with pulse from multimedia libs which has the fix the same... Alin On 16 March 2013 07:18, Alin Marin Elena <alinm.elena(a)gmail.com> wrote: > Yes is normal... I have headphones plugged in. > > tried the command by hand... there is no change... > > Alin > > > On 16 March 2013 02:27, Greg Freemyer <greg.freemyer(a)gmail.com> wrote: >> >> Your volume for the main speakers is set to 0%. >> >> I doubt that is a kernel issue. >> >> Did you try the commands to adjust the speaker volume from the command >> line? They worked for me even though the gui controls had no effect. >> >> Also, the patch only was submitted to factory a day or two ago. Is in >> yet? >> >> Greg >> >> Alin M Elena <alinm.elena(a)gmail.com> wrote: >> >> >Hi Greg, >> > >> >I do not think is realted to that bug as I run already factory and >> >packages >> >shall be fixed... >> >on top of that... the only thing I change to make the things to work is >> >to >> >boot a different kernel all the rest is the same. >> > >> >Alin >> > >> >On Fri 15 Mar 2013 16:12:15 Greg Freemyer wrote: >> >> On Fri, Mar 15, 2013 at 1:07 PM, Alin M Elena <alinm.elena(a)gmail.com> >> >wrote: >> >> > Thank you Cristian, >> >> > >> >> > still no sound... >> >> > here is the alsa-info.sh output >> >> > >> >> > >> >> > >http://www.alsa-project.org/db/?f=f73151ce6be2b8ef0755d3a580915f4d38896559 >> >> > >> >> > >> >> > Alin >> >> > >> >> > On Fri 15 Mar 2013 13:45:55 Cristian Rodríguez wrote: >> >> >> El 15/03/13 09:52, Alin M Elena escribió: >> >> >> > Dear All, >> >> >> > >> >> >> > I hope the celebration for 12.3 release is over and you are >> >ready to >> >> >> > roll >> >> >> > the factory. >> >> >> > >> >> >> > I was playing with kernel 3.9.rc2 form KH and I had the >> >unpleasant >> >> >> > surprise to find myself without sound... With 3.8.2 kernel and >> >prior >> >> >> > everything is ok. >> >> >> > >> >> >> > I have pasted links to the alsa-info.sh outputs and attached the >> >kernel >> >> >> > log >> >> >> > for both cases. >> >> >> > >> >> >> > no sound >> >> >> > >> >http://www.alsa-project.org/db/?f=75737f80ac2a65b7b3e0a39e7cb1330335c72 >> >> >> > def >> >> >> > works >> >> >> > >> >http://www.alsa-project.org/db/?f=9b80d10ef648afb39e9d87a2c57fd8d112b13 >> >> >> > 8b7 >> >> >> > >> >> >> > regards, >> >> >> > Alin >> >> >> >> Looks like the same bug I had. Fix is in bugzilla. >> >> >> >> https://bugzilla.novell.com/show_bug.cgi?id=805865 >> >> >> >> summary: pulseaudio is turning down your volume. >> >> >> >> === >> >> Simple mixer control 'Speaker',0 >> >> Capabilities: pvolume pswitch >> >> Playback channels: Front Left - Front Right >> >> Limits: Playback 0 - 127 >> >> Mono: >> >> Front Left: Playback 0 [0%] [-57.50dB] [on] >> >> Front Right: Playback 0 [0%] [-57.50dB] [on] >> >> === >> >> >> >> fyi: I'm not experienced looking at alsa info, so I may be >> >> misinterpreting your outputs. >> >> >> >> Greg >> >> -- >> Sent from my Android phone with K-9 Mail. Please excuse my brevity. > > -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] unsubscribe
by Luis González 16 Mar '13

16 Mar '13

unsubscribe -- Luis González @ GMAIL -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] Tumbleweed: systemd-htop-service fails
by Patrick Shanahan 15 Mar '13

15 Mar '13

systemd-htop-service fails: 11:33 Crash: ~ # systemctl status htop.service htop.service - Process view on a Virtual Terminal with htop. Loaded: loaded (/usr/lib/systemd/system/htop.service; enabled) Active: failed (Result: start-limit) since Thu, 2013-03-14 11:31:05 EDT; 2min 30s ago Process: 16107 ExecStop=/usr/bin/sh -c /usr/bin/clear > /dev/tty${HTOP_TTY} < /dev/tty${HTOP_TTY} (code=exited, status=1/FAILURE) Process: 16103 ExecStart=/usr/bin/sh -c /usr/bin/htop ${HTOP_PARAMS} > /dev/tty${HTOP_TTY} < /dev/tty${HTOP_TTY} (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/htop.service Mar 14 11:31:05 Crash systemd[1]: Unit htop.service entered failed state Mar 14 11:31:05 Crash systemd[1]: Stopping Process view on a Virtual Terminal with htop.... Mar 14 11:31:05 Crash systemd[1]: Starting Process view on a Virtual Terminal with htop.... Mar 14 11:31:05 Crash systemd[1]: Failed to start Process view on a Virtual Terminal with htop.. Mar 14 11:31:05 Crash systemd[1]: Unit htop.service entered failed state Note: there is a new version for 12.3 but not Tumbleweed ??? -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 13

[opensuse-factory] Warning, openSUSE:Tumbleweed is now empty
by Greg KH 14 Mar '13

14 Mar '13

With the release of openSUSE 12.3, openSUSE:Tumbleweed is now empty, to allow for easier updating. For those of you who wish to keep Tumbleweed 12.2 running for a while, without having to upgrade, I suggest you do NOT update your Tumbleweed system for a while until you wish to upgrade. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 6

[opensuse-factory] Tumbleweed: libreoffice (liblpsolve55-0) wants to downgrade
by Patrick Shanahan 14 Mar '13

14 Mar '13

"zypper dup" wants to downgrade libreoffice wants to install liblpsolve55-0-5.5.2.0-2.1.1 to replace liblpsolve55-5.5.0.13-23.1.2 this replacement draws libreoffice-3.6.3.2.4-2.4.1 seems incorrect? -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 4

[opensuse-factory] Tumbleweed: apsupcd no longer starts
by Patrick Shanahan 14 Mar '13

14 Mar '13

systemctl enable apcupsd.service succeeds systemctl start apcupsd.service fails /lib/systemd/system/apcupsd.service wants "/sbin/apcupsd" where it actually is: /usr/sbin/apcupsd which is incorrect, file location or systemd script? apcupsd-3.14.10-57.8.x86_64 has it at /usr/sbin/apcupsd -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Re: [obs submit-request 159411] server:php:applications/php5-pear-DB: created by pgajdos
by Ralf Lang 14 Mar '13

14 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 14.03.2013 16:22, pgajdos(a)suse.cz wrote: > On Thu, Mar 14, 2013 at 04:15:47PM +0100, Ralf Lang wrote: >>> https://build.opensuse.org/request/show/159411 >>> >>> Description: - really run tests >>> >> >> Why would we? Any new test for old bugs would fail and stall >> upgrades. Is this a new policy? > > No, but why there is > > %check %{__pear} run-tests > > at all then? Good catch. I'd suggest to remove it altogether. - -- Ralf Lang Linux Consultant / Developer Tel.: +49-170-6381563 Mail: lang(a)b1-systems.de B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlFB64UACgkQCs1dsHJ/X7CtAwCgtlJopCMRDYUqjfPBhxEjN/cq s1sAnApwXpa3b3fcXIA+o7VsWGA6GOqX =t9cA -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed: klipper icon does not show
by Patrick Shanahan 14 Mar '13

14 Mar '13

system is up-to-date (12.3 based) klipper icon does not show in tray but is running/active and work maybe related: attempting to log out of present kde session via "leave" locks screen for >30 seconds, then proceeds configured short-cut keys do work outside kde apps I do not believe this is related to 12.3 specifically as it started about a week ago. -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed wants to revert kernel
by Patrick Shanahan 14 Mar '13

14 Mar '13

This morning at 8:55am my time, gmt -5, I did a zypper dup and my kernel was updated to: kernel-desktop-3.8.2-31.1.x86_64 Later today 12.3 became available via Tumbleweed repos but zypper wants to downgrade the kernel to: kernel-desktop-3.7.10-1.1.1.x86_64 Should I do the downgrade or lock kernel-desktop from openSUSE Current OSS/openSUSE Current updates confused. -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] current repo links not updated again
by Greg KH 14 Mar '13

14 Mar '13

Can someone please update the "current" repo links to point to the 12.3 release? They weren't updated for 12.2 either, does this need to be added to a checklist somewhere so that it gets done automatically for the next release? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] the next staging project: giflib5
by Stephan Kulow 13 Mar '13

13 Mar '13

Hi, Is anyone interested in fixing the 10 packages needing an update for giflib5? I set up openSUSE:Factory:Staging:giflib5 after reverting the update in openSUSE:Factory and will add maintainers happily. But all packages in there are branches of the devel project, so just submit the fixes to the devel project. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 17

[opensuse-factory] oh crap....
by Robert Schweikert 13 Mar '13

13 Mar '13

Well, Still a few hours to the release, thus I'll take the liberty to post to factory ;) After switching my repos to 12.3 from 12.2, running "zypper in zypper" and then "zypper dup" I ended up with a weird network state. The network has a bridge configured and there is one ethernet card. The bridge uses a static IP, everything is IPv4 and needless to say I did not make any network changes right before or while I was running zypper dup. The machine is also an nis client. Running ypwhich produces: ypwhich: Can't communicate with ypbind But ypbind is running: systemctl status ypbind.service ypbind.service - NIS/YP (Network Information Service) Clients to NIS Domain Binder Loaded: loaded (/usr/lib/systemd/system/ypbind.service; enabled) Active: active (running) since Tue, 2013-03-12 20:46:14 EDT; 12min ago Process: 1608 ExecStartPost=/usr/share/ypbind/ypbind-systemd-post (code=exited, status=0/SUCCESS) Main PID: 1605 (ypbind) CGroup: name=systemd:/system/ypbind.service └ 1605 /usr/sbin/ypbind -n I can also get into the machine via ssh. But trying to get out fails: traceroute www.gmail.com traceroute to www.gmail.com (74.125.226.214), 30 hops max, 40 byte packets using UDP 1 triumph.rjsdomain (192.168.1.6)(H!) 3004.348 ms (H!) 3003.268 ms (H!) 3002.193 ms the routing table appears to be OK: # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gateway.rjsdoma 0.0.0.0 UG 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 and I can ping the gateway: # ping gateway PING gateway.rjsdomain (192.168.1.1) 56(84) bytes of data. 64 bytes from gateway.rjsdomain (192.168.1.1): icmp_seq=1 ttl=64 time=0.415 ms 64 bytes from gateway.rjsdomain (192.168.1.1): icmp_seq=2 ttl=64 time=0.332 ms 64 bytes from gateway.rjsdomain (192.168.1.1): icmp_seq=3 ttl=64 time=0.341 ms ^C --- gateway.rjsdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.332/0.362/0.415/0.043 ms Tried restarting the network, no success. ifconfig shows the following info. # ifconfig br0 Link encap:Ethernet HWaddr 6C:F0:49:06:05:6A inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4941 errors:0 dropped:0 overruns:0 frame:0 TX packets:3220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:734351 (717.1 Kb) TX bytes:576571 (563.0 Kb) eth0 Link encap:Ethernet HWaddr 6C:F0:49:06:05:6A inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5575 errors:0 dropped:0 overruns:0 frame:0 TX packets:3768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:927474 (905.7 Kb) TX bytes:672689 (656.9 Kb) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:6645 errors:0 dropped:0 overruns:0 frame:0 TX packets:6645 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:434935 (424.7 Kb) TX bytes:434935 (424.7 Kb) I thought a bound interface has 0.0.0.0 If I remove the bridge and just use eth0 as the network device things work. Putting the bridge back in place (using YaST) kills the network again. :( Anyway, I am stumped and need help. Thanks, Robert -- Robert Schweikert MAY THE SOURCE BE WITH YOU SUSE-IBM Software Integration Center LINUX Tech Lead rjschwei(a)suse.com rschweik(a)ca.ibm.com 781-464-8147 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 10

[opensuse-factory] OK, folks, time to make it known!
by Basil Chupin 13 Mar '13

13 Mar '13

I keep seeing, "Only 2 days to go!" when it comes to the release of 12.3. But I also know that the Gold is made available for downloading BEFORE the 'official' release. This has been so in the past. So, where is 12.3 Gold available for download? Now, come on, give out with the info..... :-) . BC -- Using openSUSE 12.3 x86_64 with KDE 4.10.1 & kernel 3.8.2-1 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 11

[opensuse-factory] [12.3] Timeout exceeded when accessing .../suse/setup/descr/app-icons.tar.gz
by Felix Miata 12 Mar '13

12 Mar '13

Retrieving repository 'OSS' metadata...[*] <subject> Abort, retry, ignore? [a/r/i/?] (r): Trying again... Retrieving repository 'OSS' metadata...[*] Why when doing a zypper ref is access to an icons archive preventing the refresh from proceeding? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Adding installer to Rescue CD
by Erwin Van de Velde 12 Mar '13

12 Mar '13

Hi, Would it be possible to add the installer/updater to the 12.3 Rescue CD as well? Can be similar to the one of the Network install CD. I like keeping a rescue CD or USB stick at hand in case of trouble and it would be nice if it was multifunctional :-) Best regards -- Erwin Van de Velde G+: http://profiles.google.com/erwin.vandevelde -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 13

[opensuse-factory] Adding 12.3 repo to Base:System
by Andrey Borzenkov 11 Mar '13

11 Mar '13

Would it be possible to add repo for 12.3 to it? Just so that branched packages inherit it by default? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Very slow loading of kernel/initrd with os12.3
by Joschi Brauchle 11 Mar '13

11 Mar '13

Hello, I have been testing openSUSE 12.3 since Beta 1 in VirtualBox and found everything great. I decided to install several physical machines with RC2 over the weekend. But now I experience a problem that was not there in virtualbox: Loading of the initrd via grub legacy from harddisk is **extremely slow** on all of the physical machines, e.g. on a very recent Core-i7 system it takes ~20 seconds, on an older Core2Duo up to 60 seconds! These times are only for loading the initrd, not booting the system! During these 20-60 seconds, the HDD led of the machines are constantly on/flashing. The problem exists even with the "stock" kernel and initrd from the oss repo under /boot/x86_64/loader, if I copy then to the boot partition and add them to grub. The problem does **not** exist if I boot the machine from CD or PXE! This is our disk layout: --------- # fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000ec0fc Device Boot Start End Blocks Id System /dev/sda1 * 2048 305151 151552 83 Linux /dev/sda2 305152 17092607 8393728 82 Linux swap / Solaris /dev/sda3 17092608 976773119 479840256 8e Linux LVM --------- The /boot partition is ext4. How do I debug this problem? Currently there is no further output except the grub screen showing ------ root (hd0,0) kernel ... initrd ... <flashing cursor> ------ We have not had this issue with openSUSE 12.2 or with 12.3 in Virtualbox. I guess I should open a bugzilla about this? Best regards, J Brauchle

11 23

[opensuse-factory] New Package Racket
by Togan Muftuoglu 11 Mar '13

11 Mar '13

Hi, I would be submitting racket to factory. Currently racket is developed in devel:languages:misc. You can find more information about Racket and what you can do with it http://www.racket-lang.org/ Racket (formerly called PLT Scheme) is a multi-paradigm programming language in the Lisp/Scheme family, that also serves as a platform for language creation, design, and implementation. The programming language is known for its powerful macro system which enables the creation of embedded and domain-specific languages, language constructs such as classes or modules, and separate dialects of Racket enable different semantics. Racket's interactive mode encourages experimentation, and quick scripts easily compose into larger systems. Small scripts and large systems both benefit from native-code JIT compilation. When a system gets too big to keep in your head, you can add static types. Togan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] [RFC] A better way to update config.{guess,sub}
by Ismail Doenmez 11 Mar '13

11 Mar '13

Hi, With every new architecture, one needs to update config.guess and config.sub files to recent version so configure scripts will work. This is cumbersome because these files are huge and the patches will have to be refreshed with each release. Hence I'd like to propose a better way to do this. First of all, we'll package gnuconfig (http://git.savannah.gnu.org/cgit/config.git/tree/) which contains official GNU config.guess/sub files. Then add an rpm macro like %update_config_guess_sub . which will copy the latest config.{guess,sub} from the filesystem to the directory passed by the second parameter. This way we won't have ugly patches around. Comments? -- SUSE LINUX Products GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 18

[opensuse-factory] 12.3 -- if it isn't too late....
by Basil Chupin 11 Mar '13

11 Mar '13

....could the following programs be added to the list of programs which are installed by default, please?: make gcc libpangox The first 2 are required to compile the nVidia driver, and the last is required by a number of programs which will not run without it and the only way to find out why they won't is to run the program in a terminal to get the error message. It would also be very nice if- mc and nano were also added to this list of default installs. BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.1-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 27

[opensuse-factory] Questions re Tumbleweed
by Basil Chupin 11 Mar '13

11 Mar '13

I just installed oS 12.2 and then "upgraded" it to Tumbleweed. The burning question I have about TW is: how can I install - and/or should I install - latest versions of programs/applications/DE in TW? For example, TW has only KDE 4.9.5 but v 4.10 has been around for a while (and I have it in oS 12.2). Also, the latest version of LibreOffice is 4.0 but the one in TW is 3.6. Can I use the KDE 4.10 repo used for 12.2 to upgrade KDE in TW? But re LibreOffice, I install it manually as a download from the LO site. Can I do the same in TW? Thanks -- Using openSUSE 12.3 x86_64 KDE 4.10.00 & kernel 3.8.1-30 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 17

[opensuse-factory] Installation from Factory fails
by Thomas Worm 10 Mar '13

10 Mar '13

Hello, I try to install current factory. But in setup it says: - 'repo2solv.sh' '-o' '/var/cache/zypp/solv/openSUSE-13.1-1.1.6/solv' '/var/cache/zypp/raw/openSUSE-13.1-1.1.6' susetags2solve susetag: line 1933731: bad dependency '=Prc: grub2-1' gzip: stdout: Broken pipe How can I fix this? -- Mit freundlichen Grüßen, Thomas Worm ****************************** Thomas Worm Handel & Dienstleistung Postfach 2207 D-90009 Nürnberg Hausanschrift: Hintere Cramergasse 3 D-90478 Nürnberg ****************************** Telefon: +49 1803 030505000* Telefax: +49 1803 030505050* * 9 Ct./Min. aus dem dt. Festnetz, max 42 Ct./Min aus dem dt. Mobilfunknetz, andere Netze abweichend Allgemeiner Kontakt: info(a)thomas-worm.de Buchhaltung: buchhaltung(a)thomas-worm.de ****************************** Geschäftsführer: Thomas Worm thomas.worm(a)thomas-worm.de Kontoverbindung: Inhaber: Thomas Worm H. u. D. Kontonummer: 38 56 38 Bankleitzahl: 760 606 18 Kreditinstitut: Volksbank-Raiffeisenbank Nürnberg eG Steuernummer: 240-290-21429 USt-ID: DE250745940 ISBN-Verlagsnummer: 3-86749 ****************************** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Zypp errors when trying to refresh Factory repository
by Raymond Wooninck 10 Mar '13

10 Mar '13

Hi, Finally today a new factory was published for the daring ones :-), but it seems that zypp is refusing to accept it. During the refresh it comes up with the error the it failed to cache the repo. History: - repo2solv.sh -o /var/cache/zypp/solv/Factory-OSS_1/solv /var/cache/zypp/raw/Factory-OSS_1 sustags2solv: sysetags: line 1933490: bad dependency: =Prc: grub2-1 gzip: stdout: Broken pipe gzip: stdout: Broken pipe gzip: stdout: Broken pipe gzip: stdout: Broken pipe Try Again ? Any solutions ? Raymond -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] 12.3 RC2 apcupsd: wrong path in service file
by dieter 10 Mar '13

10 Mar '13

Hi, current factory-snapshot: apcupsd-3.14.10-3.1.3.x86_64 contains a systemd service file /usr/lib/systemd/system/apcupsd.service which has the path /sbin/apcupsd, But the apcupsd binary is installed in /usr/sbin/apcupsd. Either the path in the service file should be corrected or a link should be created in /sbin to make it work. Dieter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 12.3 RC2 - a regression in one part?
by Basil Chupin 10 Mar '13

10 Mar '13

I installed RC2 late yesterday (my Australian time) and only just had to chance to do some "playing around" with it. Am I doing something wrong or is this a known regression in 12.3? I always configure the system to have own set of widgets for each Desktop and then place all my apps I use daily in the launcher on the taskbar - and I sort them according to their importance to ME. KDE 4.10 in 12.2 respected this placement - but this was not so for a while until some "fix" was done for 12.2 (or KDE for 12.2). RC2 has regressed to what occurred before the fix in 12.2: the icons will NOT stay in their positions in the launcher - they move around on reboot. And yes, I do have the correct settings in Taskbar Manager Settings. Have I missed some new option which affects this (like I did with the new config option in Konsole) or is this a regression? BC -- Using openSUSE 12.2 x86_64 KDE 4.10.1 & kernel 3.8.2-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Fwd: [Reminder] GSoC Ideas on Ideas Page and Mentors
by Saurabh Sood 10 Mar '13

10 Mar '13

Hi, We have about 15 days to have a solid ideas page for Google Summer of Code this year. Applications start on the 17th of March. At the moment, I put up the projects from last year's ideas page on the wiki page, but they are open to be taken by mentors. Feel free to add your name to the mentors. There is a lot of interest among students about Google Summer of Code for openSUSE, and I have got many mails from prospective students about the ideas that we have on the ideas page. I think we should spend some effort into making our participation successful. Our Ideas Page: https://en.opensuse.org/openSUSE:GSOC_ideas Please put up your ideas / make yourself available for mentoring on the ideas that we already have on the page. -- Regards,. Saurabh Sood Have a lot of fun! -- Regards,. Saurabh Sood Have a lot of fun! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] re: bugzilla bug #806628 - raw scripts forced into /bin/sh (ignoring user's current shell) ... bug priority raised
by Linda Walsh 09 Mar '13

09 Mar '13

Sorry, ... Probably should be fixed before 12.3 ships... Fortunately, the fix is easy -- just remove the offending patch: bash-3.2-longjmp.dif I copied and pointed the old bug to a new one that's I could set the right flags on... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] Security issue in TYPO3 CMS
by Thomas Worm 09 Mar '13

09 Mar '13

Hello, > Unfortunately those versions break > external links and the Typo3 team did > another release some hours > ago to fix this ;-) Thanks for the hint. I noticed that, too, but I hadn't the time yesterday to package the new fix. On Thu, 07 Mar 2013 13:28:53 +0100 Christian Boltz wrote: > Please [...] submit packages with 4.5.25, > 4.6.18 and 4.7.10. The requests are now there: SR#158094 SR#158095 SR#158096 Best Regards, Thomas Re: [opensuse-factory] Security issue in TYPO3 CMS From: Christian Boltz <opensuse@xxxxxxxxx> Date: Thu, 07 Mar 2013 13:28:53 +0100 Message-id: <33239910.GqHY7iePmG(a)tux.boltz.de.vu> Hello, Am Donnerstag, 7. März 2013 schrieb Thomas Worm: the TYPO3 CMS team released a security fix. Because of that I do following SRs to factory: #157586 #157587 #157591 Unfortunately those versions break external links and the Typo3 team did another release some hours ago to fix this ;-) Please revoke the SRs and submit packages with 4.5.25, 4.6.18 and 4.7.10. Please also make sure the fixed packages are included in openSUSE 12.3. I'm not sure if they can still make it into the release (Coolo will probably tell you when accepting the Factory SRs). If he doesn't take the fix into 12.3, request a maintenance update. Regards, Christian Boltz -- Und fuer die Jahre-Hiersein finde ich die zwei Ergebnisse (unechte Mini-FAQ und Etikette) recht duenn!!!!!!!! Ich glaub es hackt. Du kannst ja das Geld zurück verlangen, wenn es Dir nicht paßt. [> toRBEN pOLLmann und Bernd Brodesser in suse-linux] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail: opensuse-factory+owner@xxxxxxxxxxxx -- Mit freundlichen Grüßen, Thomas Worm ****************************** Thomas Worm Handel & Dienstleistung Postfach 2207 D-90009 Nürnberg Hausanschrift: Hintere Cramergasse 3 D-90478 Nürnberg ****************************** Telefon: +49 1803 030505000* Telefax: +49 1803 030505050* * 9 Ct./Min. aus dem dt. Festnetz, max 42 Ct./Min aus dem dt. Mobilfunknetz, andere Netze abweichend Allgemeiner Kontakt: info(a)thomas-worm.de Buchhaltung: buchhaltung(a)thomas-worm.de ****************************** Geschäftsführer: Thomas Worm thomas.worm(a)thomas-worm.de Kontoverbindung: Inhaber: Thomas Worm H. u. D. Kontonummer: 38 56 38 Bankleitzahl: 760 606 18 Kreditinstitut: Volksbank-Raiffeisenbank Nürnberg eG Steuernummer: 240-290-21429 USt-ID: DE250745940 ISBN-Verlagsnummer: 3-86749 ****************************** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] nvidia repo for 12.3 - error
by Carl Fletcher 09 Mar '13

09 Mar '13

Trying to install the nvidia driver in 12.3GM Results in this error #### YaST2 conflicts list - generated 2013-03-09 05:06:59 #### nothing provides ksym(default:init_timer_key) = fb0e29f needed by nvidia-gfxG03-kmp-default-310.32_k3.4.6_2.10-15.1.x86_64 [ ] do not install nvidia-computeG03-310.32-15.1.x86_64 [ ] break nvidia-gfxG03-kmp-default-310.32_k3.4.6_2.10-15.1.x86_64 by ignoring some of its dependencies (work around using Lord_LT drivers) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 12.3 is build disabled now
by Stephan Kulow 08 Mar '13

08 Mar '13

Hi, I almost forgot to tell: 110 builds ought to be enough for everyone and I now enabled again autosubmit to factory, let's restart the fun ;) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] grub2.spec in OBS: The file you look at is not valid UTF-8 text. Please convert the file.
by Andrey Borzenkov 08 Mar '13

08 Mar '13

That is what I get when I try to view https://build.opensuse.org/package/view_file?expand=1&file=grub2.spec&packa… in browser. Could someone explain what it does not like? I guess it started to happen after duwe patches :p TIA -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

Re: [opensuse-factory] why are raw scripts forced into /bin/sh instead of user's shell (a Suse patch to bash)
by Joerg Schilling 07 Mar '13

07 Mar '13

"Carlos E. R." <robin.listas(a)telefonica.net> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > > > El 2013-02-27 a las 22:52 -0600, Larry Finger escribió: > > On 02/27/2013 09:59 PM, Linda Walsh wrote: > > > Why do you think this is SUSE only. Every distro has a default shell, which > > is what you get when you do not specify the shell to use. > > /bin/sh is a link to a shell. Linda, find out which it is in your system. If /bin/sh may be linked to different shells, you need to know that many scripts on Linux are not Shell complatible as they depend on bashisms. Jörg -- EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin js(a)cs.tu-berlin.de (uni) joerg.schilling(a)fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] Tumbleweed virtual terminals (tty1-6)
by Achim Gratz 07 Mar '13

07 Mar '13

Somewhere around the beginning of the year the virtual text terminals sometimes are initialized too late, so that xdm starts before these become available. If that happens you can't switch from vt7 (xdm/X11) back to any of the virtual terminal screens and have to restart xdm before these become available. Is there any setting I may have missed that influences this or is systemd simply missing a dependency here? Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf microQ V2.22R2: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 12

[opensuse-factory] Security issue in TYPO3 CMS
by Thomas Worm 07 Mar '13

07 Mar '13

Hello, the TYPO3 CMS team released a security fix. Because of that I do following SRs to factory: #157586 #157587 #157591 -- Mit freundlichen Grüßen, Thomas Worm ****************************** Thomas Worm Handel & Dienstleistung Postfach 2207 D-90009 Nürnberg Hausanschrift: Hintere Cramergasse 3 D-90478 Nürnberg ****************************** Telefon: +49 1803 030505000* Telefax: +49 1803 030505050* * 9 Ct./Min. aus dem dt. Festnetz, max 42 Ct./Min aus dem dt. Mobilfunknetz, andere Netze abweichend Allgemeiner Kontakt: info(a)thomas-worm.de Buchhaltung: buchhaltung(a)thomas-worm.de ****************************** Geschäftsführer: Thomas Worm thomas.worm(a)thomas-worm.de Kontoverbindung: Inhaber: Thomas Worm H. u. D. Kontonummer: 38 56 38 Bankleitzahl: 760 606 18 Kreditinstitut: Volksbank-Raiffeisenbank Nürnberg eG Steuernummer: 240-290-21429 USt-ID: DE250745940 ISBN-Verlagsnummer: 3-86749 ****************************** -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] [Factory only] Licenses and spdx
by Stephan Kulow 07 Mar '13

07 Mar '13

Hi, I think I did a submit request for all packages that will fail now, so I decided to go ahead and make "invalid-license" a fatal error in rpmlint. To avoid all packages not in factory failing too (I only care for things openSUSE ships as part of the distribution to have a valid license), I added rpmlint-Factory-strict to only apply in openSUSE:Factory:* itself. But I encourage you to add this to your devel project: Support: rpmlint-Factory-strict and fix the fallout. osc service localrun format_spec_file (with uptodate obs-service-format_spec_file from openSUSE:Tools) will rewrite most license strings to the correct format. This is btw something else I encourage you to do: add the _service file from openSUSE:Factory/_project to your devel project's _project (just osc co devel:tools/_project and osc add _service). This way new packages in your devel project will get the spec file format factory expects. And you will always have the option to commit with --skip-local-services. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] Can the Activities icon be changed back to the original colorized version for 12.3?
by Roman Bysh 07 Mar '13

07 Mar '13

Hello all, I know it's late but...Every time I look at the Activities icon 3D box I'm thinking about VirtualBox. It doesn't look right. I think the original colored traffic lights would look great on black. Yes? -- Cheers! Roman ------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 16

[opensuse-factory] secure boot trouble
by Robert Schweikert 06 Mar '13

06 Mar '13

Hi, Installing RC2 on Lenovo Carbon X1 results in: Image failed to verify with *ACCESS DENIED* when Secure Boot is enabled. Booting from the stick to which I dumped the RC2 ISO image is not a problem. The issue occurs after the installation. I setup a custom partitioning scheme /dev/sda1 vfat mounted to /boot/efi /dev/sda2 swap /dev/sda3 xfs mounted as / I think this should work for secure boot. Turning secure boot off allows the installed image to boot and the installation process to continue, i.e. enter the configuration part of the installation process. Later, Robert -- Robert Schweikert MAY THE SOURCE BE WITH YOU SUSE-IBM Software Integration Center LINUX Tech Lead rjschwei(a)suse.com rschweik(a)ca.ibm.com 781-464-8147 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] Correct URL for installing NET-12.3rc2 ?
by Per Jessen 06 Mar '13

06 Mar '13

The NET iso doesn't seem to contain the correct install URL, which one do I use - http://download.opensuse.org/factory/repo/oss http://download.opensuse.org/factory-snapshot/repo/oss thanks Per -- Per Jessen, Zürich (6.8°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

Re: [opensuse-factory] Fwd: Opensuse Mate branding
by Dimstar / Dominique Leuenberger 05 Mar '13

05 Mar '13

On Tue, 2013-03-05 at 19:15 +0100, denisart benjamin2 wrote: > Le 05/03/2013 19:09, Dimstar / Dominique Leuenberger a écrit : > > On Tue, 2013-03-05 at 19:01 +0100, denisart benjamin2 wrote: > > > >> First, Mate uses an own 'gsettings' namespace to avoid conflicts with > >> Gnome keys. We have already build mate-brandings packages like > >> mate-control-center-branding-opensuse. > >> For specific branding I tell now, We provide exactly the same keys as > >> Gnome3. For that I think it is more coherent to use > >> glib2-branding-openSUSE. We search a solution to use adwaita as default > >> theme, because I have not found a solution with inspecting Gnome stuff. > > If we indeed talk about the same keys, then I agree, this should not > > (actually MUST not) be duplicated into another package.. having both > > installed would only result in 'surprises' for the users and maintainers > > (of either of the desktops). > > > > We should just make sure that the glib branding packages does not become > > to a 'dump-it-all' config package (for example, I moved settings from a > > specific extension out in a sep. package, as I did not feel it correct > > to be part of the glib2-branding-openSUSE package...). > > > > We should probably discuss the specific keys, the values you intend to > > set them too and implications this would have on any of the DEs... > > > > Do you have specific examples at hand already? > > > > Dominique > > > > > If you wan't, I have locally make required changes in a local package. > You can find it here : > https://build.opensuse.org/package/view_file?expand=1&file=glib2-branding.g… > . > I have removed Gnome keys, to look at result but you can see that all > Gnome keys have their Mate equivalent. for the org.mate.* keys, I propose to keep them in a mate-specific branding package... not, that there would be a problem to update them in glib2-branding-openSUSE, but it gives you more freedom and flexibility and full ownership. The last one in the file though is trickier: org.freedesktop.Tracker should likely NOT be configured in this file (but more likely in a tracker-branding-openSUSE.. such a default should be for the entire distribution, not only for one specific desktop environment). Then: don't call the file glib2-branding.gschema.override: call it mate-branding.override or so: the name generally does not matter: ALL override files are read and applied as 'the new default', unless the user changed them explicitly (so it's only an override of the default, not of the users choice). Does that help? Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] Fwd: Opensuse Mate branding
by Dimstar / Dominique Leuenberger 05 Mar '13

05 Mar '13

On Tue, 2013-03-05 at 19:01 +0100, denisart benjamin2 wrote: > > > First, Mate uses an own 'gsettings' namespace to avoid conflicts with > Gnome keys. We have already build mate-brandings packages like > mate-control-center-branding-opensuse. > For specific branding I tell now, We provide exactly the same keys as > Gnome3. For that I think it is more coherent to use > glib2-branding-openSUSE. We search a solution to use adwaita as default > theme, because I have not found a solution with inspecting Gnome stuff. If we indeed talk about the same keys, then I agree, this should not (actually MUST not) be duplicated into another package.. having both installed would only result in 'surprises' for the users and maintainers (of either of the desktops). We should just make sure that the glib branding packages does not become to a 'dump-it-all' config package (for example, I moved settings from a specific extension out in a sep. package, as I did not feel it correct to be part of the glib2-branding-openSUSE package...). We should probably discuss the specific keys, the values you intend to set them too and implications this would have on any of the DEs... Do you have specific examples at hand already? Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Fwd: Opensuse Mate branding
by denisart benjamin2 05 Mar '13

05 Mar '13

Hello everyone ! I'm now a maintainer of the Mate development project and we are working on Factory. But after discussing with the main maintainer of Mate project, we have a little conflict and I need your opinion. For providing a default desktop, Gnome use gsettings schemes in glib2-branding-opensuse. I have purposed to add our keys in glib2-branding.gschema.override.in because I want to purpose the same experience that Gnome2. But he wants to use a gschema.override.in in a mate-desktop specific branding package. What do you think about this ? Regards. Benjamin -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New package: arandr
by Stefan Seyfried 05 Mar '13

05 Mar '13

Hi all, I'd like to propose a new package for Factory (and later general openSUSE of course): arandr, "Another XRandR GUI" ARandR is designed to provide a simple visual front end for XRandR. Relative monitor positions are shown graphically and can be changed in a drag-and-drop way. It is written in python with only very little dependencies (mainly the xrandr command line tool and python-gtk) The project's homepage is http://christian.amsuess.com/tools/arandr/ Upstream is active, whenever there is a need to change things due to changed xrandr syntax those changes are done quickly. Patches I made for my package have been incorporated (actually not my patch, but my idea was implemented in an even better way). Actually upstream asked me how to best install it from my home repository, which kicked me to get my butt up and get it included in Factory. I noticed that Pascal already had put it into X11:Utilities in the mean time and that actually looks like a good devel project for it. Right now the instructions for SUSE users on the home page are not as easy as for the other distributions, this is why I want to get it into the distrubution proper, so that "zypper in arandr" will just work for everyone. I'm not going to drop off the edge of our planet's disc soon, and I have to maintain the package for my boss anyway, so including it should be a no-brainer IMHO :-) best regards, seife -- Stefan Seyfried Linux Consultant & Developer Mail: seyfried(a)b1-systems.de GPG Key: 0x731B665B B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] 12.3 RC2: Thunderbird spell check.
by Carlos E. R. 05 Mar '13

05 Mar '13

Hi, I don't remember if I had to install spell checking in thunderbird as a package via yast (I have not found any), or via add-ons for each user. :-? -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 14

[opensuse-factory] 12.3 RC2: machine runs warmer.
by Carlos E. R 05 Mar '13

05 Mar '13

Hi, This laptop under 11.4 runs with both cores at 30ºC. Under 12.3 RC it stays at 36ºC, continuously. Kernel regression? load average: 0.18, 0.15, 0.23 I'm having the same apps: thunderbird and mozilla. In fact, in 11.4 I has more tasks running. In 11.4 I use gnome, here xfce. -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 12.3 RC2: Broken display manager when xfce desktop is selected on install.
by Carlos E. R 05 Mar '13

05 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, When you choose XFCE as the default desktop type, the displaymanager is set to "lightdm". I have found two problems with this, so far: Bug 807091 - XFCE ignores .i18n file Bug 807097 - On default XFCE install, display manager fails to halt or reboot machine The second one is the worst for most people, I guess: the machine can not be halted nor rebooted. There has been no answer at all on this report so far. I have tried 'xdm' as display manager: this solves the first issue, but then there are no buttons to halt, reboot, or choose session type. This display manager does not have enough features. Bug 805847 says that "lxdm" has the same problem of not being able to halt or reboot. Besides KDM or GDM, are other display managers that I could try? (I'm going to try wdm next) - -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iF4EAREIAAYFAlE1RhsACgkQja8UbcUWM1yDiAD/QEyRLXnYLa7jzpsEIEUp8aDh eFnS4TZF7Cl+zlSadC8A/1hACnueHFUfYLfoW2GtyoLpm7mXwZnui7POCGLywTAc =fIwe -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] Intel 82574L Gig E Adapter not recognized by kernel 3.8.0-28-desktop
by Bruce Ferrell 04 Mar '13

04 Mar '13

Ok, I have the driver for the card loaded: lsmod | grep e1000e e1000e 252782 0 ./netdriverinfo.sh : 01:00.0 Make/Model = Intel Corporation Gigabit CT Desktop Adapter Ethernet controller = Intel Corporation 82574L Gigabit Network Connection VenID:DevID = 8086:10d3 Driver name = No driver loaded Driver version = No driver loaded Modinfo e1000e as version: 2.1.4-k alias: pci:v00008086d000010D3sv*sd*bc*sc*i* And the Id string seems to be present This worked under 3.7.9 modprobe -r e1000e rr-iii:~ # dmesg [ 3993.357312] e1000e 0000:01:00.0: Disabling ASPM L0s L1 [ 3993.357507] e1000e 0000:01:00.0: irq 59 for MSI/MSI-X [ 3993.357512] e1000e 0000:01:00.0: irq 60 for MSI/MSI-X [ 3993.357519] e1000e 0000:01:00.0: irq 61 for MSI/MSI-X [ 3993.360114] e1000e 0000:01:00.0 eth1: MAC Wakeup cause - Link Status Change [ 3993.430154] device eth1 left promiscuous mode dmesg -C dmesg modprobe e1000e debug=10 rr-iii:~ # dmesg [ 4040.770118] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 4040.770120] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 4040.770137] e1000e 0000:01:00.0: Disabling ASPM L0s L1 [ 4040.770236] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4040.770301] e1000e 0000:01:00.0: irq 59 for MSI/MSI-X [ 4040.770305] e1000e 0000:01:00.0: irq 60 for MSI/MSI-X [ 4040.770308] e1000e 0000:01:00.0: irq 61 for MSI/MSI-X [ 4040.867432] e1000e 0000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:12:90:dd [ 4040.867435] e1000e 0000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 4040.867446] e1000e 0000:01:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-008 [ 4041.002738] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4041.002741] device eth1 entered promiscuous mode modprobe -r e1000e rr-iii:~ # dmesg [ 4040.770118] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 4040.770120] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 4040.770137] e1000e 0000:01:00.0: Disabling ASPM L0s L1 [ 4040.770236] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4040.770301] e1000e 0000:01:00.0: irq 59 for MSI/MSI-X [ 4040.770305] e1000e 0000:01:00.0: irq 60 for MSI/MSI-X [ 4040.770308] e1000e 0000:01:00.0: irq 61 for MSI/MSI-X [ 4040.867432] e1000e 0000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:12:90:dd [ 4040.867435] e1000e 0000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 4040.867446] e1000e 0000:01:00.0 eth1: MAC: 3, PHY: 8, PBA No: E46981-008 [ 4041.002738] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4041.002741] device eth1 entered promiscuous mode [ 4067.818496] e1000e 0000:01:00.0: Disabling ASPM L0s L1 [ 4067.818693] e1000e 0000:01:00.0: irq 59 for MSI/MSI-X [ 4067.818697] e1000e 0000:01:00.0: irq 60 for MSI/MSI-X [ 4067.818700] e1000e 0000:01:00.0: irq 61 for MSI/MSI-X [ 4067.821318] e1000e 0000:01:00.0 eth1: MAC Wakeup cause - Link Status Change [ 4067.891790] device eth1 left promiscuous mode [ 4067.962423] vboxnetflt: dropped 0 out of 0 packets modprobe e1000e ethtool eth1 Settings for eth1: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available Suggestions anyone? I can roll back if needed, but I'd really rather not -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 9

[opensuse-factory] 12. RC2 - Konsole query
by Basil Chupin 04 Mar '13

04 Mar '13

Does anybody know, please, how to get rid of the statusbar (at the bottom) of the Konsole (terminal)? In the past there was an option in Configure Profile to remove it but this option appears to have been removed in the version in 12.3 RC2. BC -- Using openSUSE 12.3 x86_64 KDE 4.10.00 & kernel 3.8.1-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] update on sunday
by Peter Czanik 04 Mar '13

04 Mar '13

Hello, Today I updated my openSUSE 12.3 and run into two changes: - I can use XFCE again - windows is not listed in grub2 any more. I remember, that the second problem came up a few weeks ago, but at that time I was not affected, so I deleted the related e-mails. Today I looked for it in bugzilla and in the archives, but I can't find the solution. Could somebody re-post it? Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] App compat between versions of OpenSuse (specifically related to perl, but including others).
by Linda Walsh 04 Mar '13

04 Mar '13

I opened a bug on this problem as https://bugzilla.novell.com/show_bug.cgi?id=804070 I was told the reason for this was the fault of Perl and their binary instability. Additionally, I was asked for a patch to fix the problem with Gvim (which I provided though it seems that was ignored) to dynamically load those libs (python, perl & ruby) that can be dynamically loaded -- with the result being that if they are not present, the user will be able to still run Vim and it can still do it's job (Editing), but the specific scripting language that is not loadable won't work. In the perl bug for this (https://rt.perl.org:443/rt3/Ticket/Display.html?id=117015) It was said: -------------- 1) Due to Perl's current rapid release policy and maintenance patch policies, ABI changes in minor versions are not necessary anymore. New or radically redesigned (internally) features just dont get added anymore like they did in 5.8. If the interp ABI compatibility system is ever reintroduced (not likely), I would suggest a const table of offsets to the members in the interp library, and a "*(SV ***)(char*)my_perl+PL_ginterpoffsets[ABI_STACK_SP]" for "PL_stack_sp". ------------------------------------------- I.e. 5.16.0, 5.16.1 and 5.16.2 should be binary API compat. and 2) They wanted to better know what the problem is that is causing OpenSUSE to force each version to be incompatible (In installing a factory binary on my 12.1 system (that has all preconditions met -- I'm running a new enough glibc, & such), a new perl (5.16.2) was installed over my previous 5.16.1. Over 1000 modules stopped working due to SuSE not following normal practice and including previous version lib paths (at LEAST anything in the 5.16.x series, if not 5.14 included!). A quick solution was cp -alu <5.16.1-lib> <5.16.2-lib>...which seemed to be the quickest solution at the time. If it was a major version, I likely would have done it as well and planned on doing a cpan-recompile of all binary modules in the near future. Anyway, they asked: ------------------ Can someone explain what the *technical* complaint or feature request here is? Are some vendor linux perl scripts in pure perl hard coded to check $^V/$]? Or are the vendor Perls "XS_VERSION_BOOTCHECK;" and "XS_APIVERSION_BOOTCHECK;" modified to not allow forward compatibility to newer minor releases (and when upgrading the perl to a newer minor perl, all existing XS libs won't load)? Or are absolute versioned paths to perl baked into the OS in C or on shebangs (why wouldn't symlinks fix this?)? Or I want an XS lib compiled with 5.12.4 to load into a 5.16.1 process (change the current policy so major versions are compatible)? ------------------ Are version checks in perl or are they at the binary level so things won't load? And what do you need from the perl community to stop doing this -- they claim it isn't necessary for minor versions. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Question about missing repos in RC2 (eg)
by Basil Chupin 04 Mar '13

04 Mar '13

I installed RC2 yesterday. The list of repos has packman (for example) missing - but I need to use and try out vlc. I manually added the packman repo but as it doesn't yet have an entry for 12.3 I used 12.2. I installed vlc but haven't tried it yet. Looking at the packman download directory there is the entry Factory. Should I have used this Factory rather than 12.2 when adding packman to the list of repos in RC2? BC -- Using openSUSE 12.2 x86_64 KDE 4.10.00 & kernel 3.8.1-2 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] python-irc, python-irclib obsoletion / request to delete
by Boris Manojlovic 03 Mar '13

03 Mar '13

Hello, package python-irclib we have in factory is obsolete and not required by any package, what i would like to do is to make it obsolete (tag it) and push new package python-irc. Question from me should i provide python-irclib fake provides as that is "good practice" or as it is really not compatible with old one just ignore it? I'm just pushing it into devel:languages:python and requested delete too https://build.opensuse.org/request/show/157149 <add to d:l:p https://build.opensuse.org/request/show/157150 < delete of python-irclib from d:l:p (can not yet push to factory as no devel project exist without push of d:l:p -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Tumbleweed kernel packages mismatch
by Vahis 03 Mar '13

03 Mar '13

These appeared first: Kernel-source and kernel-devel, version 3.8.1-30.1 Then, after waiting for a while, these came: kernel-desktop and kernel-desktop-devel, 3.8.0-29.1 Vahis -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] tumpleweed : zypper dup
by ellanios82 03 Mar '13

03 Mar '13

Hello List - am not so experienced XFCE desktop user : perhaps i did something wrong :( ....... this morning did zypper dup [ about 280 MB ] - upon completion, LibreOffice refused to start, complaining : something about libs pango cairo .......... next, did a re-boot hoping probs would be solved: but, seems my user password got messed-up : after konsole yast password re-entry was still not able to log on to xfce however managed to log on to KDE , but KDE was also not ok. - in despair, restored root partition from backup. - pfew!! - for me an anxious 'zypper dup' experience ........ best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] 12-3 RC2: apparmor: unknown service
by Carlos E. R. 03 Mar '13

03 Mar '13

Minas-Anor:~ # chkconfig apparmor apparmor: unknown service (apparmor is installed and running) I thought it was understood that "chkconfig" would be maintained. -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] Network Stack in 12.3
by Dimstar / Dominique Leuenberger 03 Mar '13

03 Mar '13

Hi all, As many are surely aware, there are 'funny' issues in 12.3 when it comes to the network stack. On my machine, I experienced WiFi not being able to connect at all (Intel chip). => Updating the kernel-firmware package (Used Larry's pkg!) worked around this.. Then, NetworkManager and sysconfig seem to cause real pain. sysconfig was updated to 0.80.x (and a respective change added to NM). Now, whenever I use this configuration (tested on cable/LAN), then there is either no default route set, or /etc/resolv.conf is not being written. Having my system back in shape by reverting to sysconfig 0.76.8 and reverting NM to not make use of sysconfig 0.8 features got me running again. Don't get me wrong: I don't say we should kill the progress of sysconfig, but we should postpone this for 13.1, as in my opinion we are way to late in the release to figure out what all goes wrong and needs fixing (the issue is larger than it looks at first, just look at issues caused by this like https://bugzilla.novell.com/show_bug.cgi?id=804052, where yast does not know how to perform the switch anymore between ifup and NM. As such, I very much vote for - Inclusion of kernel-firmware update, as prepared by Larry - Revert sysconfig to 0.78.8 - Revert the change in NetworkManager ( https://build.opensuse.org/package/rdiff?linkrev=base&package=NetworkManage… ) NOTE: Even doing this revert will leave machines which HAD these packages in a 'weird' state: NETWORKMANAGER=yes/no was removed from /etc/sysconfig/network/config with sysconfig 0.80 and rolling back to 0.78.8 adds =no to the system. So those machines might be in a very odd stage... yet, this is a 'rather' small subset of systems which we can possibly manage. Looking forward to some noise here! Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 12.3 RC2: Thunderbird excesive CPU ussage.
by Carlos E. R 02 Mar '13

02 Mar '13

Thunderbird is continously using 80..100% CPU on one core. Global search and indexer is disabled in Th setup. Desktop is XFCE. CPU is: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (two cores) This does not happens in 11.4, the production system on this laptop. RC2 with current updates (Sat Mar 2 13:45:55 CET 2013). -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] 12.3 RC2: can not power off nor reboot from the graphical terminal.
by Carlos E. R 02 Mar '13

02 Mar '13

Hi, I have installed 12-3 RC2, updated. I installed from DVD and the desktop is XFCE. DISPLAYMANAGER="lightdm" (default setting) When I log out, then I click on stop machine or reboot. It asks for confirmation, and I'm returned to the display manager login. No halt, no reboot happens. I have to ctrl-alt-f1, then ctrl-alt-del. Bug 807097 -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] tumbleweed : zypper dup probs
by ellanios82 02 Mar '13

02 Mar '13

Hello List xfce ____ - several times in the past, after updates it has been impossible to log on to xfce unless one first logs on to KDE ............... best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] NetworkManager getting fixed in time for GM release of 12.3
by Roman Bysh 02 Mar '13

02 Mar '13

Hello all, I've installed openSUSE 12.3 RC2 on my desktop.Does any one know if the plasmoid-networkmanagement will be working in time for the final release? Now that I've already set it up under YaST. I have an ethernet cable connected to my desktop. However, under the "Wired" tab nothing appears. It should show "Wired connection 1". -- Cheers! Roman ------------------------------------------- openSUSE -- Get it! Discover it! Share it! ------------------------------------------- http://linuxcounter.net/ #179293 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 6

Re: [opensuse-factory] why are raw scripts forced into /bin/sh instead of user's shell (a Suse patch to bash)
by Andrey Borzenkov 02 Mar '13

02 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 В Fri, 1 Mar 2013 00:57:16 +0100 (CET) "Carlos E. R." <robin.listas(a)telefonica.net> пишет: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > > > El 2013-02-27 a las 22:52 -0600, Larry Finger escribió: > > On 02/27/2013 09:59 PM, Linda Walsh wrote: > > > Why do you think this is SUSE only. Every distro has a default shell, which > > is what you get when you do not specify the shell to use. > > /bin/sh is a link to a shell. Linda, find out which it is in your system. > You miss the point. The upstream bash invokes script using the same name under which it has been started: /* The name of this shell, as taken from argv[0]. */ char *shell_name = (char *)NULL; (open?)SUSE patch forces script to always run with /bin/sh There must be some reason why it was changed. I would be interested to know it too. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlEwF54ACgkQR6LMutpd94wrDgCcCdOTNJGZAegMN5H2T0+Nk8IB wtkAn1FVG4c9x9EGjupdSodQVL/mPupE =RkvE -----END PGP SIGNATURE-----

5 5

[opensuse-factory] opensuse 12.3 RC | starting LSB... and freeze
by Luis González 01 Mar '13

01 Mar '13

Hello, I'm installing the opensuse 12.3 RC and I noticed an issue before the installation finished, and after reviewed several times I realized the error (laptop freeze completely) occurred when starting LSB. /var/log/messages not shown relevant info boot.log said Failed to start Network Manager, and of course I do no have network devices. When a launch yast and go to Network Devices, the error occurred again detecting devices... systemctl status NetworkManager.service said Active: failed status = 1/FAILURE What can I do to fix this issue? Can I look in other log files? Any suggestions? thank you! -- Luis González @ GMAIL -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] 12.3 RC2: worrisome kernel warnings:
by Carlos E. R. 01 Mar '13

01 Mar '13

What is this I see on my /var/log/warn? > 2013-03-01T21:58:59.516766+01:00 Minas-Anor kernel: [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) > 2013-03-01T21:58:59.516768+01:00 Minas-Anor kernel: [ 0.000000] ACPI: XSDT 00000000b9ff6120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013) > 2013-03-01T21:58:59.516770+01:00 Minas-Anor kernel: [ 0.000000] ACPI: FACP 00000000b9ff5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516774+01:00 Minas-Anor kernel: [ 0.000000] ACPI: DSDT 00000000b9fe5000 0BA4E (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516776+01:00 Minas-Anor kernel: [ 0.000000] ACPI: FACS 00000000b9f8f000 00040 > 2013-03-01T21:58:59.516778+01:00 Minas-Anor kernel: [ 0.000000] ACPI: HPET 00000000b9ff4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516780+01:00 Minas-Anor kernel: [ 0.000000] ACPI: APIC 00000000b9ff3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516782+01:00 Minas-Anor kernel: [ 0.000000] ACPI: MCFG 00000000b9ff2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516783+01:00 Minas-Anor kernel: [ 0.000000] ACPI: ASF! 00000000b9ff1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516785+01:00 Minas-Anor kernel: [ 0.000000] ACPI: SLIC 00000000b9fe4000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) > 2013-03-01T21:58:59.516789+01:00 Minas-Anor kernel: [ 0.000000] ACPI: BOOT 00000000b9fe3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516791+01:00 Minas-Anor kernel: [ 0.000000] ACPI: SSDT 00000000b9fe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) > 2013-03-01T21:58:59.516806+01:00 Minas-Anor kernel: [ 0.000000] Zone ranges: > 2013-03-01T21:58:59.516807+01:00 Minas-Anor kernel: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] > 2013-03-01T21:58:59.516809+01:00 Minas-Anor kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > 2013-03-01T21:58:59.516811+01:00 Minas-Anor kernel: [ 0.000000] Normal [mem 0x100000000-0x13fffffff] > 2013-03-01T21:58:59.516813+01:00 Minas-Anor kernel: [ 0.000000] Movable zone start for each node > 2013-03-01T21:58:59.516814+01:00 Minas-Anor kernel: [ 0.000000] Early memory node ranges > 2013-03-01T21:58:59.516820+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] > 2013-03-01T21:58:59.516822+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0x00100000-0xb9e60fff] > 2013-03-01T21:58:59.516824+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0xb9ebf000-0xb9f81fff] > 2013-03-01T21:58:59.516826+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0xb9fbf000-0xb9fe1fff] > 2013-03-01T21:58:59.516827+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0xb9ff7000-0xb9ffffff] > 2013-03-01T21:58:59.516829+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] > 2013-03-01T21:58:59.517038+01:00 Minas-Anor kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005784 > 2013-03-01T21:58:59.517040+01:00 Minas-Anor kernel: [ 0.000000] Policy zone: Normal > 2013-03-01T21:58:59.517178+01:00 Minas-Anor kernel: [ 0.056050] mtrr: your CPUs had inconsistent variable MTRR settings > 2013-03-01T21:58:59.517198+01:00 Minas-Anor kernel: [ 0.061564] ACPI: Executed 1 blocks of module-level executable AML code > 2013-03-01T21:58:59.517201+01:00 Minas-Anor kernel: [ 0.063666] ACPI: SSDT 00000000b9e70c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) > 2013-03-01T21:58:59.517203+01:00 Minas-Anor kernel: [ 0.064225] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517205+01:00 Minas-Anor kernel: [ 0.064228] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) > 2013-03-01T21:58:59.517206+01:00 Minas-Anor kernel: [ 0.064444] ACPI: SSDT 00000000b9e6e618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) > 2013-03-01T21:58:59.517210+01:00 Minas-Anor kernel: [ 0.064960] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517212+01:00 Minas-Anor kernel: [ 0.064963] ACPI: SSDT (null) 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) > 2013-03-01T21:58:59.517214+01:00 Minas-Anor kernel: [ 0.065372] ACPI: SSDT 00000000b9e6fe18 001CF (v01 PmRef ApIst 00003000 INTL 20051117) > 2013-03-01T21:58:59.517216+01:00 Minas-Anor kernel: [ 0.065933] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517217+01:00 Minas-Anor kernel: [ 0.065936] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117) > 2013-03-01T21:58:59.517219+01:00 Minas-Anor kernel: [ 0.066168] ACPI: SSDT 00000000b9e70f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) > 2013-03-01T21:58:59.517221+01:00 Minas-Anor kernel: [ 0.066502] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517229+01:00 Minas-Anor kernel: [ 0.066505] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117) > 2013-03-01T21:58:59.518163+01:00 Minas-Anor kernel: [ 0.623345] Simple Boot Flag value 0x5 read from CMOS RAM was invalid > 2013-03-01T21:58:59.518177+01:00 Minas-Anor kernel: [ 0.644255] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > 2013-03-01T21:58:59.519051+01:00 Minas-Anor kernel: [ 2.437877] [Firmware Bug]: Invalid critical threshold (0) > 2013-03-01T21:58:59.519159+01:00 Minas-Anor kernel: [ 2.562025] i915: fixme: max PWM is zero > 2013-03-01T21:58:59.519233+01:00 Minas-Anor kernel: [ 13.666163] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared > 2013-03-01T21:58:59.519237+01:00 Minas-Anor kernel: [ 13.738489] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared > 2013-03-01T21:58:59.519272+01:00 Minas-Anor kernel: [ 15.558156] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20120913/utaddress-251) > 2013-03-01T21:58:59.519276+01:00 Minas-Anor kernel: [ 15.558170] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251) > 2013-03-01T21:58:59.519284+01:00 Minas-Anor kernel: [ 15.558205] lpc_ich: Resource conflict(s) found affecting gpio_ich > 2013-03-01T21:58:59.519376+01:00 Minas-Anor kernel: [ 16.096290] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > 2013-03-01T21:58:59.519439+01:00 Minas-Anor kernel: [ 17.353994] sd 6:0:0:0: [sdb] No Caching mode page present > 2013-03-01T21:58:59.519440+01:00 Minas-Anor kernel: [ 17.353999] sd 6:0:0:0: [sdb] Assuming drive cache: write through > 2013-03-01T21:58:59.519447+01:00 Minas-Anor kernel: [ 17.358376] sd 6:0:0:0: [sdb] No Caching mode page present > 2013-03-01T21:58:59.519449+01:00 Minas-Anor kernel: [ 17.358385] sd 6:0:0:0: [sdb] Assuming drive cache: write through > 2013-03-01T21:58:59.519453+01:00 Minas-Anor kernel: [ 17.372379] sd 6:0:0:0: [sdb] No Caching mode page present > 2013-03-01T21:58:59.519454+01:00 Minas-Anor kernel: [ 17.372387] sd 6:0:0:0: [sdb] Assuming drive cache: write through > 2013-03-01T21:59:16.916633+01:00 Minas-Anor kernel: [ 38.740998] audit_printk_skb: 39 callbacks suppressed Needless to say, I have not seen any of that with other openSUSE versions. Should I worry? I see "firmware bug" above, deprecated calls, resource conflicts... :-? -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Network failure when installing 12.3 RC2
by Carlos E. R. 01 Mar '13

01 Mar '13

Hi, I just installed 12.3 RC2 this afternoon, from the DVD. I use the XFCE desktop. Yast during installation asked for the details of my network (wifi), but the test failed, and the details box was empty. The configuration was that of ifup mode. When I finally booted, I could not login as user (xfce). This has an update that corrects it, but I had no network. Had to login as root. YaST network module said that the configuration was handled by network manager, but there was no applet in sight. I switched to ifup mode, and all the data I had entered during config was there. I accepted, then YaST said that it had to install smpppd, and failed because there was no network. This smpppd package should have been installed earlier from the DVD, if it is necesary. It is absurd that to configure network you have to install a package that requires network. Checking, I did have network running, but there was no default route set, so no access to internet. No matter if I clicked to obtain route from dhcp or manually iinYaST, it was ignored. However, a manual restart of "rcnetwork" succeeded and I got Internet. Then, YaST network module also succeeded to install smpppd, and setup default route as well. And the update repaired XFCE access as user, too. Do you want a bugzilla about this? Several people are reporting very similar issues in the fourm. -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

Re: [opensuse-factory] why are raw scripts forced into /bin/sh instead of user's shell (a Suse patch to bash)
by Ruediger Meier 01 Mar '13

01 Mar '13

On Friday 01 March 2013, Carlos E. R. wrote: > El 2013-02-27 a las 22:52 -0600, Larry Finger escribió: > > On 02/27/2013 09:59 PM, Linda Walsh wrote: > > > > Why do you think this is SUSE only. Every distro has a default > > shell, which is what you get when you do not specify the shell to > > use. > > /bin/sh is a link to a shell. Linda, find out which it is in your > system. And note that if you invoke /bin/bash by the /bin/sh link then some bashisms are disabled. To give an example ... rudi@tenfore:~> ls -l /bin/sh lrwxrwxrwx 1 root root 4 2012-11-13 23:17 /bin/sh -> bash rudi@tenfore:~> bash -c ". .bashrc" rudi@tenfore:~> sh -c ". .bashrc" sh: line 0: .: .bashrc: file not found rudi@tenfore:~> cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] 400 remote error: /usr/local/sbin/bssign 256
by Andrey Borzenkov 01 Mar '13

01 Mar '13

I have created key with "osc signkey --create", but ... bor@opensuse:~/obs/home:arvidjaar:branches:Base:System/grub2> osc results openSUSE_Factory x86_64 failed* openSUSE_Factory i586 failed* bor@opensuse:~/obs/home:arvidjaar:branches:Base:System/grub2> osc rbl home:arvidjaar:branches:Base:System/grub2 openSUSE_Factory x86_64 400 remote error: /usr/local/sbin/bssign 256 bor@opensuse:~/obs/home:arvidjaar:branches:Base:System/grub2> Well ... this is a real bug to be fixed ... what should I do to make it build? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 64 bits isos for the RC2
by Alexis "Agemen" 01 Mar '13

01 Mar '13

Hi everyone ! Serge just pointed out on the french IRC channel that links to the 64 bits ISOs may be broken no software.opensuse.org for the RC2. Going on the website, development version, whatever the ISO we choose, we seem to obtain only i586 or i686 files (according to the names at least). Is there any known problem with the build system ? Are the 64 bits images not generated yet ? Should I report a bug ? Thanks in advance for the hint you could give :-) Best wishes, Alexis -- OrbisGIS supporter. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

13 19