openSUSE Factory March 2010

factory@lists.opensuse.org

76 participants
64 discussions

[opensuse-factory] Cronie as default cron in Factory

by Michal Seben

Hi all! Next week I will move cronie[1] package to Factory, so it will replace old cron. If someone is against this step, please just write what's wrong. As I announced earlier, you could find Cronie in Base:System repo [2] there is also prepared wiki about known changes after switch to cronie [3] [1]https://fedorahosted.org/cronie/ [2]https://build.opensuse.org/package/show?package=cronie&project=Base%3ASys… [3]http://en.opensuse.org/Cron_replace#Differences_between_old_openSUSE.27s_… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

10 years, 11 months

[opensuse-factory] syslog-ng update

by Peter Czanik

Hello, I prepared updated syslog-ng packages with the close supervision of Marius Tomaschewski, the maintainer of the syslog-ng package. They are available in home:czanik in the openSUSE BS. I would like to see these packages included in Factory, to replace the ancient 2.0 syslog-ng, but MT seems to have disappeared (no response to e-mails in the past two weeks). Questions: - it works fine on my machines, but could anybody else test it? - what is the proper way to get syslog-ng updated in factory, if the maintainer seems to be unavailable? - I have now both 3.0 and 3.1 packages there, called syslog-ng and syslog-ng31. The ultimate goal is to include 3.1. Should I drop the current syslog-ng package and rename syslog-ng31 to syslog-ng? Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

11 years, 5 months

[opensuse-factory] Is the upgrade from 32 bits to 64 bit supported? Question for devs O:-)

by Carlos E. R.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm asking here a question not related to factory directly, because I want to reach the devs. You can reply on opensuse list instead if you prefer. To keep it short (longer post in the opensuse list), I'm attempting to upgrade from 11.0 to 11.2 (32 bits) using the retail DVD, wich turns out it has only the x64 version. It offers to upgrade to 64 bit the 32 bit install: The architecture of the system installed in the selected partition is different from the one of this product" [continue] [cancel] I said "continue", then I checked the package list. As far as I could see, it intended to replace all packages with those corresponding to the 64 bits version. If this works, fine... but I was afraid, and I cancelled. Not because risking data (it is a copy), but because of possible waste of time. I thought I'd better RFC. Has anybody done this, an upgrade from 32 to 64 bits? Does it work? Is it "supported"? - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Elessar)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAktvNHIACgkQU92UU+smfQVsTwCfSYFG8N7Owo/PWNu0ylYKGqmr fuQAoJQSLDrMlTDMYeRihU5SfBa0fVz8 =zvu9 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

11 years, 7 months

[opensuse-factory] 11.2 Release Notes

by Karl Eichwalder

It would be good if we would start with collection release notes snippets for 11.2 now. Do not hesitate to provide input! Here is some background information: http://en.opensuse.org/Release_Notes -- Karl Eichwalder R&D / Documentation SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

11 years, 10 months

[opensuse-factory] PAM broken?

by Vahis

I am running latest ML as a VBox guest on an 11.2 host. I can ping in and out. I can ssh in and out, LAN or WAN. I can open LAN Samba shares I can connect in over fish or sftp from LAN and WAN But can't connect out to any hosts over fish or sftp. Host I'm trying to connect over WAN shows: pam_unix2(sshd:auth): conversation failed error: ssh_msg_send: write error: PAM: Authentication failure for 'user' from 'ipaddress' port '33804 ssh2. Host I try to connect in LAN says nothing. I booted the same VBox guest using 11.0 Live KDE CD and everything works from there. What should I look into? Vahis -- http://waxborg.servepics.com -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 years, 1 month

[opensuse-factory] Netiso MS3: Not all needed modules present in repo.

by Oddball

Hi, I updated to MS3, using zypper dup, rebooting complained about two missing kernelmodules: result no desktop starting up, no tty. Fixing the issue using the Netiso leaded to ncurses and trying to load the installmodules 3 times. Not possible to install or repair. 'an error occured'.... All went well untill the install should start: ti connecting to the server, downloading the modules. Than few modules missing, and stop. Rescue did work, but i did not know the commands to get it doing what i needed. Luckily i have a still working 11.1 install. Any ideas as how to get the missing modules installed, and getting the system booted? (amd modules and pata are missing, caught in a glimps) Unfortunately i am not able to get to the bootlog from this install, i will try to get the right names of the missing modules. -- Enjoy your time around, Oddball, aka M9. OS: Linux 2.6.27.19-3.2-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.1 (x86_64) KDE: 4.2.1 (KDE 4.2.1) "release 103" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 years, 1 month

[opensuse-factory] new package: crawl

by Sascha Peilicke

Hello, I'm new to this list and I want to propose the addition of the package 'crawl' to devel:openSUSE:Factory. It contains the Stone Soup version of Dungeon Crawl, a rogue-like game much like Nethack. It isreleased under GPLv2 and is one of the most popular rogue-likes and very actively developed. Still, it hasn't been packaged yet. I was working on the package for quite some time now and I think it's in a good shape to get some reviews on it. The game consists of a terminal-version and a SDL-based tiled version which are split across the packages 'crawl' and 'crawl-sdl'. Currently they are found in the project 'home:saschpe'. -- Kind regards, Sascha Peilicke http://saschpe.wordpress.com

12 years, 1 month

[opensuse-factory] List of features of openSUSE 11.3

by Shayon Mukherjee

Hello, I am looking for a list of Features, some 'KEY' features of openSUSE 11.3.Also what special changes have been made compared to 11.2.As i have plans to make a promo for 11.3,so this would be very essential. Here are some of them http://lists.opensuse.org/opensuse-factory/2010-02/msg00066.html , i would like to know the updated data (if any) ... Thanks in advance -- Regards, SJ(Shayon) openSUSE http://en.opensuse.org/User:Wwarlock Twitter: ShayonM -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 years, 1 month

[opensuse-factory] Oxygen icons on Apache

by Javier Llorente

Hello list-mates, As some of you may know, I've been working on making Oxygen icons available on Apache, and I would like to get some feedback. Do you see any unrecognizable icons at http://www.javierllorente.com/tmp/ ? I want to make it easy to enable. Quoting from the README file included in the apache2-icons-oxygen package In order to enable this collection of icons on Apache, you have to add Include /etc/apache2/mod_autoindex-defaults-oxygen.conf (Apache-wide) to /etc/apache2/httpd.conf. Do not forget to comment the line Include /etc/apache2/mod_autoindex-defaults.conf and comment the following as well in /etc/apache2/default-server.conf Alias /icons/ "/usr/share/apache2/icons/" <Directory "/usr/share/apache2/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> (Virtual hosts) to your virtual host configuration file (usually located under /etc/apache2/vhosts.d/). Is there a better way to do it? My idea is to make Apache's directory listing more beautiful. It's already part of the Apache Build Service project and if you like it, I could submit it to Factory. The latest rpm packages are available at http://download.opensuse.org/repositories/home:/javierllorente/ Build Service project: https://build.opensuse.org/package/show?package=apache2-icons- oxygen&project=home:javierllorente I was also thinking about dropping apache2-icons-crystal unless someone likes Crystal icons. Comments and suggestions are welcome! -- Javier Llorente

12 years, 1 month

[opensuse-factory] gtkterm?

by Sid Boyce

Was this packaged dropped from openSUSE or wasn't there to begin with? I have come across a number guys, mainly newbies, who have got into a rut trying to use minicom, I pointed them to gtkterm which is a GUI with a simple menu that eliminates the confusion. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 years, 1 month

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

openSUSE Factory March 2010