March 2023 - openSUSE Users - openSUSE Mailing Lists

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[opensuse] Project management software question for project managers
by Ted Byers 15 Apr '24

15 Apr '24

I am looking for project management software I can install on my Suse box. Alas, there are quite a number of prducts that claim to be suitable project management products, but I am hoping to obtain a little help separating the wheat from the chaffe. Basically, when I open the project management software, I want to be able to choose from among a number of projects that are under way, and then see the relation between a client's wish list and the functional requirements specs, and then how these specs relate to the UML diagrams that have been created, and from there, what tasks have been defined for each requirement and the identity of all persons involved, the developers and their managers, and the person who designed the code that supports the requirement. And with that, I want to be able to see the project's timeline, the related bugs, &c. I would even want to be able to open the source code files and examine the code that was actually written. Here is my wish list: 1) a web application that stores data in either PostgreSQL or MySQL. 2) easy integration with UML tool (or has it's own UML tool that supports round trip engineering) 3) resource management (e.g. computers, and development tools, that can be used, personelle assigned to each task) 4) documentation of relation between functional requirements specs to specific tasks and specific unit and integration tests. 5) time/effort tracking 6) bug tracking, including data relating the existance of the bug, and effort required to fix it, to the person who wrote the original code, the person who supervised him or her, and the person who designed the 'feature' in question, the time taken to complete the original task, and the technologies used (to imprrove accountability as well as to determine retraining and continuing education needs (people aren't disposable, so instead of taking a harsh aproach to problems identified, I prefer to use education as a corrective, but I can't design corrective instruction without knowing precisely what the need is). I also need to know if a developer has a higher than normal bug rate simply because he doesn't take enough time to ensure the job is done right, or because I haven't adequately trained him, or because of a poor choice of tools, or somethng else that may be my fault. 7) use of task effort tracking history to generate provisional effort/cost estimates from new project's functional requirements 8) easy integration with open source ERP products like OFBiz (which may make trakcing resources and manpower easier, as well as connect real production data to the enterprise's accounting systems) 9) easy integration with CMS products, like Wordpress (especally for production documentation, includng degin documentation and user guides and reference manuals) 10) easy integration with verion control systems such as subversion. If there is a decent product that supports all of this, great (and language used to implement it doesn't matter), but if I have to write code to add missing requirements, then I am limited to those implemented using Perl or Java (and running on Tomcat). I don't know PHP well enough, and I don't know Ruby at all; and I really don't want to think about implementing this sort of thing in C++ (though I could if absolutely necessary). If you have project management experience, and use tools that are available for Suse Linux, what software product(s) did you use, and with what result? While I await relies, I will continue to review web documentation for those products I have found so far, to see if any of them are a) suitable for use in production and b) to see to what extent they support the features I am after. I have seen a number of products so far in my search, that deserve to be nameless, because they provide no way to relate cost estimates to one's team's track record, or to the details of the design, and seem satisfied with production of a pretty gantt chart (which is why I have formed the view that there is a whole lots of chaffe in the set of applications that call themselves project menement software - I have yet to find anything that really has the potential of being labelled wheat). Thanks Ted -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

No Login, no Graphics after update to Tumbleweed 20230211-0
by Peter Maffter 30 Mar '24

30 Mar '24

Hello, after the update the screen only shows a '-'. All the usual other tty screens that you get with e.g. STRG-ALT-F1 are also gone. I can connect to the PC via ssh from my Ubuntu Laptop and check what is going on. I am using an old GTX 570 on that PC. Previously when the G06 stuff was installed instead of updating the needed G04 stuff, I was able to install NVIDIA-Linux-x86_64-390.157.run manually and the login and XFCE worked. But now even that fails. :-( Any pointers? Is that the beginning of the things that are named in Subject "Nvidia 390x driver users - glibc 2.37 will bring bad news" ? I do have strange output about signature and verification: 2023-02-13T00:08:13.628957+01:00 machine4 kernel: [ 3.411047][ T527] nvidia: loading out-of-tree module taints kernel. 2023-02-13T00:08:13.628957+01:00 machine4 kernel: [ 3.411690][ T527] nvidia: module license 'NVIDIA' taints kernel. 2023-02-13T00:08:13.628958+01:00 machine4 kernel: [ 3.412304][ T527] Disabling lock debugging due to kernel taint 2023-02-13T00:08:13.628958+01:00 machine4 kernel: [ 3.418769][ T527] nvidia: module verification failed: signature and/or required key missing - tainting kernel 2023-02-13T00:08:13.628963+01:00 machine4 kernel: [ 3.426827][ T538] tg3 0000:0d:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:e6:5d:d3 2023-02-13T00:08:13.628964+01:00 machine4 kernel: [ 3.427483][ T538] tg3 0000:0d:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) 2023-02-13T00:08:13.628964+01:00 machine4 kernel: [ 3.428122][ T538] tg3 0000:0d:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] 2023-02-13T00:08:13.628965+01:00 machine4 kernel: [ 3.428740][ T538] tg3 0000:0d:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] 2023-02-13T00:08:13.628965+01:00 machine4 kernel: [ 3.482616][ T527] nvidia-nvlink: Nvlink Core is being initialized, major device number 241 2023-02-13T00:08:13.628966+01:00 machine4 kernel: [ 3.488784][ T527] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem 2023-02-13T00:08:13.628971+01:00 machine4 kernel: [ 3.489637][ T527] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.157 Wed Oct 12 09:19:07 UTC 2022 (using threaded interrupts) 2023-02-13T00:08:13.628972+01:00 machine4 kernel: [ 3.499362][ T527] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.157 Wed Oct 12 09:15:25 UTC 2022 2023-02-13T00:08:13.628972+01:00 machine4 kernel: [ 3.505733][ T527] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver 2023-02-13T00:08:13.628973+01:00 machine4 kernel: [ 3.506428][ T527] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 Update openSUSE Tumbleweed 20230211-0 -> 20230212-0 did not help either. Boot to the recover modes of 6.1.10-1 or 6.1.8-1 does not help . 6.1.8-1 recovery at least says that "Failed to start X Display Manager" and gives the F1,F2,...ttys. but when I install NVIDIA-Linux-x86_64-390.157.run the F1,F2, ttys are also gone. Please help. Thanks in advance BR Pete

12 68

[oS-en] iotop complains of missing feature in kernel
by Carlos E. R. 18 Feb '24

18 Feb '24

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 cer@Telcontar:~> sudo /usr/sbin/iotop -o -d 3.3333 Total DISK READ : 1169.77 K/s | Total DISK WRITE : 12.79 K/s Actual DISK READ: 1168.61 K/s | Actual DISK WRITE: 48.84 K/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 2041 be/4 news 490.70 K/s 0.00 B/s ?unavailable? texpire 9622 be/4 cer 0.00 B/s 6.98 K/s ?unavailable? firefox --sm-client-id 27~-9abbeba61260 [LS Thread] 8039 idle cer 679.07 K/s 0.00 B/s ?unavailable? tracker-miner-fs-3 12912 be/4 cer 0.00 B/s 5.81 K/s ?unavailable? firefox --sm-client-id 27~beba61260 [IndexedDB #45] * * ... CONFIG_TASK_DELAY_ACCT not enabled in kernel, cannot determine SWAPIN and IO % cer@Telcontar:~> uname -a Linux Telcontar 5.14.21-150400.24.33-default #1 SMP PREEMPT_DYNAMIC Fri Nov 4 13:55:06 UTC 2022 (76cfe60) x86_64 x86_64 x86_64 GNU/Linux cer@Telcontar:~> - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCY850Sxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVjxsAnREQY/RUTyYZuN8ZczMy KHE36e4GAJ9E6Pia/flb5Of5gQuYU1S9i0oirA== =W0vq -----END PGP SIGNATURE-----

2 3

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

[oS-EN] Question on full disk encription
by Carlos E. R. 02 Sep '23

02 Sep '23

Hi, new laptop here, and I decided to install Leap 15.4 with full disk encryption, no LVM (a feature I wanted to have for years, so I'm happy). It asks for the password twice (contrary to my customs, I'm using plymouth). It asks once before grub loads. Well, ok, there is no separate /boot, so it has to read "/" which is encrypted. Nice. But after selecting the boot entry in grub, it asks again. Once, despite being 3 partitions ("/", "/boot" and swap). Ok. Is there some way to make it ask only once? I guess not, but perhaps I'm wrong. -- Cheers / Saludos, Carlos E. R. (from Elesar, using openSUSE Leap 15.4)

10 60

KDE keyboard layout not starting on login
by Stratos Zolotas 15 May '23

15 May '23

Hello, I have a strange issue that appears in two systems. One Tumbleweed and one 15.4. I use en and gr keyboard layouts configured from the KDE settings. Although the setting is valid and as soon as I apply it the keyboard layout indicator appears in the system tray, after reboot it disappears and I have to go and re-apply the settings (it is not deleted just not "executed") to make it visible and working again. I usually use keep last session on KDE but I also tried to start with a clean session or with a manual saved session. Nothing seems to affect the keyboard layout indicator, it is always disappearing after reboot. Both systems were working as expected before. The only difference is that the issue on 15.4 appeared just after dist-upgrading from 15.3. Any ideas on how to debug it? Regards Stratos

3 6

[oS-en] Suddenly, mouse wheel doesn't work.
by Carlos E. R. 25 Apr '23

25 Apr '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Suddenly, mouse wheel doesn't work. It was working, and suddenly it stopped working. I was seeing strange messages in log related to usb, so I unplugged/replugged the mouse, no effect. I downgraded the kernel several versions, no effect. Middle button, which shares the wheel, works. Leap 15.4. XFCE. What can I do to diagnose? This one is a trackball. I connected at the same time a second mouse, cheapo, and it works fine. Telcontar:~ # hwinfo --mouse 59: USB 00.1: 10503 USB Mouse [Created at usb.122] Unique ID: PsRb.FBtr+tYVKV1 Parent ID: k4bc.029GFTetOb3 SysFS ID: /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.1 SysFS BusID: 1-13:1.1 Hardware Class: mouse Model: "Holtek USB Keyboard" Hotplug: USB Vendor: usb 0x04d9 "Holtek Semiconductor, Inc." Device: usb 0x2020 "USB Keyboard" Revision: "1.01" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" <=== WTF? No such thing. Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-id/usb-CYKB13_USB_Keyboard-event-if01, /dev/input/by-path/pci-0000:03:00.0-usb-0:13:1.1-event Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v04D9p2020d0101dc00dsc00dp00ic03isc01ip02in01" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #62 (Hub) 61: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: Mwf_.z_8Swe_nwg5 Parent ID: 2XnU.BpLUUanApo2 SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:29:00.3/usb5/5-3/5-3:1.0 SysFS BusID: 5-3:1.0 Hardware Class: mouse Model: "Logitech TrackMan Wheel" <========= Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc404 "TrackMan Wheel" Revision: "2.20" Compatible to: int 0x0210 0x0023 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event0, /dev/input/by-path/pci-0000:29:00.3-usb-0:3:1.0-event-mouse, /dev/input/by-id/usb-Logitech_Trackball-event-mouse, /dev/input/by-id/usb-Logitech_Trackball-mouse, /dev/input/by-path/pci-0000:29:00.3-usb-0:3:1.0-mouse Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v046DpC404d0220dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #64 (Hub) Telcontar:~ # - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCY9gjZRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV/vAAmwYh1wv5utPK0ta/zdr5 cu6bp5ThAJ9nYxhbeAvQzSu6GWB0joUYDysLsg== =TWyg -----END PGP SIGNATURE-----

8 23

[oS-en] Machine doesn't hibernate.
by Carlos E. R. 13 Apr '23

13 Apr '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, (same new laptop, Lenovo L14 Gen3, new Leap 15.4 install) I do "systemctl hibernate" as root, and machine recovers instantly. It just flickers the screen to black for an instant, then prompts for user password (XFCE). Tried also Gnome. Mar 29 20:47:06 Laicolasse dbus-daemon[1664]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.80" (uid=1000 pid=3705 comm="/usr/bin/wireplumber ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.2" (uid=0 pid=1662 comm="/usr/lib/bluetooth/bluetoothd ") Mar 29 20:47:06 Laicolasse dbus-daemon[1664]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.80" (uid=1000 pid=3705 comm="/usr/bin/wireplumber ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.2" (uid=0 pid=1662 comm="/usr/lib/bluetooth/bluetoothd ") Mar 29 20:47:06 Laicolasse systemd-sleep[4303]: INFO: Done. Mar 29 20:47:06 Laicolasse systemd[1]: systemd-hibernate.service: Deactivated successfully. Mar 29 20:47:06 Laicolasse systemd[1]: Finished Hibernate. Mar 29 20:47:06 Laicolasse systemd[1]: Reached target System Hibernation. Mar 29 20:47:06 Laicolasse systemd[1]: Stopped target Sleep. Mar 29 20:47:06 Laicolasse systemd-logind[1718]: Operation 'sleep' finished. Mar 29 20:47:06 Laicolasse systemd[1]: Stopped target System Hibernation. Mar 29 20:47:06 Laicolasse ModemManager[1799]: <info> [sleep-monitor] system is resuming Mar 29 20:47:06 Laicolasse NetworkManager[1806]: <info> [1680115626.2953] manager: sleep: wake requested (sleeping: yes enabled: yes) Mar 29 20:47:06 Laicolasse NetworkManager[1806]: <info> [1680115626.2954] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external') Mar 29 20:47:06 Laicolasse kernel: Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) Mar 29 20:47:06 Laicolasse kernel: Bluetooth: hci0: Device setup in 119038 usecs It says there "wake requested". By whom? I did not touch any key. Ideas? journal: <https://paste.opensuse.org/pastes/62e56c840f4a> Machine does suspend to ram, both using "systemctl suspend" or closing the lid. In BIOS config there is an option that says: Sleep State: Windows and Linux vs Linux S3 hibernation I left at default, the first option. Maybe I can try the second option. Trying [...] Power led flashes fast for some seconds, then stays on constantly. The red led on the back stays red. The screen stays black. I wait. I think nothing happens. Machine doesn't react to ping, nor keyboard. I have to press and hold the power button for 4 seconds, then press for power up and fresh full boot. Ideas? I don't have log for previous boot, journal was not persistent. Changing that :-( Behaviour for sleep has changed. Now to wake up from suspend to ram I have to press the power on button, the keyboard is ignored. Oh, at some moment the Caps Lock led became permanently "on" now. Maybe "init 1" did that? Or coming back from sleep? It seems I have to reboot to try to hibernate and have some log, but too many problems to keep using this "Linux S3" mode. Will revert after testing once more. Hibernating... Crashing Changing bios booting... <https://paste.opensuse.org/pastes/46f774d01960> last lines: Mar 29 21:30:21 Laicolasse systemd-sleep[5061]: Entering sleep state 'hibernate'... Mar 29 21:30:21 Laicolasse kernel: PM: hibernation: hibernation entry - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZCSVlxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVyh8AnA4KLKy7iwOae0npsrXv 0WRYVZ0+AJ0cm9Vvs+wt9WTzL60EV+GjI1bWCQ== =Ym2v -----END PGP SIGNATURE-----

3 9

[oS-EN] Can't see the WiFi on new laptop
by Carlos E. R. 13 Apr '23

13 Apr '23

Hi, on my new laptop (Lenovo L14 gen 3) I can not see the WiFi. Network manager doesn't see it. tlp-stat says there is no WiFi: Laicolasse:~ # tlp-stat --rfkill --- TLP 1.4.0 -------------------------------------------- +++ Wireless bluetooth = on wifi = none (no device) wwan = on hci0(btusb) : bluetooth, not connected Laicolasse:~ # Laicolasse:~ # hwinfo --wlan Laicolasse:~ # > Laicolasse:~ # inxi --bluetooth -n -N > Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 > IF: eth0 state: up speed: 100 Mbps duplex: full mac: f4:a8:0d:7a:49:01 > Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter driver: N/A > Bluetooth: Device-1: Foxconn / Hon Hai Wireless_Device type: USB driver: btusb > Report: bt-adapter ID: hci0 state: up address: 60:E9:AA:A0:1A:4A > Laicolasse:~ # I don't see it on the journal: <https://paste.opensuse.org/pastes/ccc804e35e3c> The laptop is customized, and in the papers it clearly says WiFi is included: Wireless - RZ616 Wi-Fi 6E 11AX (2x2) & Bluetooth 5.1 Ethernet - Ethernet con cable Laicolasse:~ # lsusb Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 30c9:0050 Luxvisions Innotech Limited Integrated RGB Camera Bus 003 Device 003: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader Bus 003 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 06cb:00f9 Synaptics, Inc. Bus 001 Device 002: ID 0489:e0d8 Foxconn / Hon Hai Wireless_Device Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Laicolasse:~ # --verbose Bus 001 Device 002: ID 0489:e0d8 Foxconn / Hon Hai Wireless_Device Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x0489 Foxconn / Hon Hai idProduct 0xe0d8 bcdDevice 1.00 iManufacturer 5 MediaTek Inc. iProduct 6 Wireless_Device iSerial 7 000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x00fe bNumInterfaces 3 bConfigurationValue 1 iConfiguration 8 Config_01 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 3 bFunctionClass 224 Wireless bFunctionSubClass 1 Radio Frequency bFunctionProtocol 1 Bluetooth iFunction 4 BT_FUNCTION Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 1 BT_ACL_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0011 1x 17 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0011 1x 17 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0019 1x 25 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0019 1x 25 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0021 1x 33 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0021 1x 33 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0031 1x 49 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0031 1x 49 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 6 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 2 BT_SCO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x003f 1x 63 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x003f 1x 63 bytes bInterval 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 3 BT_ISO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0a EP 10 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 3 BT_ISO_If Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0a EP 10 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x000c bNumDeviceCaps 1 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000000 (Missing must-be-set LPM bit!) Device Status: 0x0001 Self Powered What's next? Was the WiFi not included? Some command to reveal it? inxi seems to see it. lsusb seems to confirm. The Lenovo L15 can be obtained with Ubuntu, but not the L14 (15/14 are the inches). -- Cheers / Saludos, Carlos E. R. (from Elesar, using openSUSE Leap 15.4)

12 90

[oS-en] about epson1:libusb: scanner
by Carlos E. R. 11 Apr '23

11 Apr '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I had a bug that have been nagging me for a few years, for forgetting to report. I plugged my Epson scanner (Perfection 1650): <0.6> 2023-03-27T13:42:49.583719+02:00 Telcontar kernel - - - [145303.237970][T12173] usb 3-1: new full-speed USB device number 3 using xhci_hcd <0.6> 2023-03-27T13:42:49.919401+02:00 Telcontar kernel - - - [145303.574601][T12173] usb 3-1: New USB device found, idVendor=04b8, idProduct=0110, bcdDevice= 3.02 <0.6> 2023-03-27T13:42:49.919413+02:00 Telcontar kernel - - - [145303.574606][T12173] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <0.6> 2023-03-27T13:42:49.919414+02:00 Telcontar kernel - - - [145303.574608][T12173] usb 3-1: Product: EPSON Scanner <0.6> 2023-03-27T13:42:49.919415+02:00 Telcontar kernel - - - [145303.574609][T12173] usb 3-1: Manufacturer: EPSON I opened up gimp, selected File, Create Xsane device dialog. Then I would select the first entry in the photo, using epson2 library: https://paste.opensuse.org/pastes/d884de97a177 An one day, suddenly, that library failed, and I had to select the "epson" library instead. That could be Leap 15.2 or 15.3. So, today, as I was going to scan some papers I remembered and decided to report, so started to take notes as I prepared the scanner. And today it works! Heisenbug? :-o - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZCGEhhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVyHMAniPFPeEFYWOu21cytI55 Ge1W/16/AJ0bLkQWAyx5nE70wnYIu7Rnx2mCKw== =KKdI -----END PGP SIGNATURE-----

3 7

[oS-en] Instant message client?
by Carlos E. R. 03 Apr '23

03 Apr '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Do we have some instant message client? Something that can send a text message to a mobile phone, from a script? Say whatsapp, signal, telegram... :-? - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZCFgzhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVsjEAn3Ssx4aen17N/zV55ccI AZ8IwlKOAJ4403ez85yFtAbNu2cGXAAeA6yjPQ== =TouZ -----END PGP SIGNATURE-----

16 54

Re: four or maybe six modules
by Per Jessen 01 Apr '23

01 Apr '23

gebser(a)mousecar.com wrote: > It's been a very long time since I messed with modules. And I never > enjoyed running insmod or modprobe and then-- probably-- having to run > rmmod... and that was back when there were four or maybe six modules > to deal with. Now we have > > # lsmod|wc -l > 177 Here only 71 with the latest TW (i586). Only 59 on a Raspi. On the openSUSE mailing list server, only 40. There are also times when modules are loaded unnecessarily. I think even the 2.2 series kernel had more than four or five modules :-) Much will depend on what you do with your Linux systems, how many you have and how varied they are. How much you dabble with the hardware. -- Per Jessen, Zürich (15.7°C) Member, openSUSE Heroes (2016 - present) We're hiring - https://en.opensuse.org/openSUSE:Heroes

4 10

Re: Heads up: removing the mkinitrd wrapper
by Per Jessen 01 Apr '23

01 Apr '23

Carlos E. R. wrote: > On 2023-03-30 18:42, Per Jessen wrote: >> Carlos E. R. wrote: >> >>> Or, copy the old script to /usr/local/sbin, unless that is not >>> advisable. >> >> Or - oh horror - move with the times. > > I think I'm entitled to be recognized as an old fart by now :-p I'm sure you are, but does that prevent you from moving with the times? >> I still think the main point is that you don't actually dabble with >> building initrds yourself, you are happy to follow instructions to do >> so, when needed. In the future, no one is going to direct you to run >> mkinitrd, so what is the point of having an alias. > > Per, > > You may have read from me and Andrei the multiples scenarios in which > people have to run mkinitrd manually. I have been in most of them. No, I have totally missed that. I thought you were talking about having to create initrds manually. For the last couple of years, I have not been in a single situation where I _had_ to run mkinitrd. dracut was very useful though. -- Per Jessen, Zürich (16.2°C) Member, openSUSE Heroes (2016 - present) We're hiring - https://en.opensuse.org/openSUSE:Heroes

7 11

Re: [oS-EN] Question on full disk encription
by David C. Rankin 01 Apr '23

01 Apr '23

On 3/28/23 08:01, cagsm wrote: > On Tue, Mar 28, 2023 at 12:42 PM Carlos E. R. > <robin.listas(a)telefonica.net> wrote: >> new laptop here, and I decided to install Leap 15.4 with full disk >> encryption, no LVM (a feature I wanted to have for years, so I'm happy). >> It asks for the password twice (contrary to my customs, I'm using plymouth). >> It asks once before grub loads. Well, ok, there is no separate /boot, so >> it has to read "/" which is encrypted. Nice. >> But after selecting the boot entry in grub, it asks again. Once, despite >> being 3 partitions ("/", "/boot" and swap). Ok. > > doesnt the official opensuse pages state about the situation about > double entry of passphrases. i have double passphrase questionaire as > well with 15.4 fresh install via the propsed partition setup on a > notebook. btrfs or something and the snapshot filesystem stuff and > all. not expert though > >> <https://en.opensuse.org/SDB:Encrypted_root_file_system#Avoiding_to_type_the…> The page says: <quote> Warning: Do this only if you have an encrypted root partition **that includes /boot** (no separate /boot partition)! The key added to the initrd can be used to decrypt your root partition, therefore having the initrd on an unencrypted /boot partition would defeat encrypting your root partition. </quote> How do you handle the case of a separate /boot partition? -- David C. Rankin, J.D.,P.E.

4 10

leap 15.5 install - keyboard question
by Per Jessen 31 Mar '23

31 Mar '23

I'm just starting a test installation, and I used X mode by mistake - the machine had a former life and X was enabled by default (.ssh/config). In the YaST GUI (which looks really good, btw), I change locale to UK English, then keyboard to US English. It's just our normal setting, muscle memory. While YaST was doing whatever, I switched to a libreoffice document and realised the keyboard had changed. Presumably to US English. I'll wait and see if it switches back, but is this change to be expected? When we do a "normal" install without X, changing the keyboard layout only takes effect for the system being installed. -- Per Jessen, Zürich (14.9°C) Member, openSUSE Heroes (2016 - present) We're hiring - https://en.opensuse.org/openSUSE:Heroes

3 10

[oS-EN] Machine for disk encryption password happens too fast.
by Carlos E. R. 31 Mar '23

31 Mar '23

Hi, New machine (Lenovo L14 Gen3). Full disk encryption using discrete partitions with the same password ("/", "/home", swap). On boot, the Lenovo logo flashes instantly and the prompt for the disk encryption key pops fast. At this point, ctr-alt-del is ignored. There is no time nor message to press F1 for bios config or F12 for boot menu. I have to press and hold the power button for 4 seconds to power off, then power up again, and start pressing F1 or F12 fast, so that it is read. Slow pressing doesn't work. Press F1 and hold doesn't work. Question: Is it possible to insert a delay? -- Cheers / Saludos, Carlos E. R. (from Telcontar, using openSUSE Leap 15.4)

4 12

With all the talk about WiFi lately
by joe a 30 Mar '23

30 Mar '23

Another FYI from Mr. Sunshine: https://www.theregister.com/2023/03/30/wifi_spec_ambiguity_leak/?td=rt-3a

1 0

Re: Heads up: removing the mkinitrd wrapper
by Per Jessen 30 Mar '23

30 Mar '23

Simon Becherer wrote: > Am 30.03.23 um 18:42 schrieb Per Jessen: >> Carlos E. R. wrote: >> >>> Or, copy the old script to /usr/local/sbin, unless that is not >>> advisable. >> >> Or - oh horror - move with the times. >> >> I still think the main point is that you don't actually dabble with >> building initrds yourself, you are happy to follow instructions to do >> so, when needed. In the future, no one is going to direct you to run >> mkinitrd, so what is the point of having an alias. >> >> > well, the instructions you will google will lack 1 or 2 years... Some of them will, no doubt. Others might just say "rebuild your initrd". If Carlos is at that point - googling, having to apply his own imagination, read a man page - he'll work it out. > and you will somtimes face a bug for the workaround you will > nee to do yourselfe a mkinitrd. example: > https://bugzilla.opensuse.org/show_bug.cgi?id=1181768 Certainly, that will always remain. I build my own initrds all the time. http://bugzilla.opensuse.org/show_bug.cgi?id=1206781 > but this mails here will move away from the original post/problem, > so maybe we should stop or go to another list. I very much agree. -- Per Jessen, Zürich (16.3°C) What is "querulant" in Englisch?

3 3

Fwd: 20230326 last snapshot to contain i586 in the main repo
by Andrei Borzenkov 30 Mar '23

30 Mar '23

---------- Forwarded message --------- From: Dominique Leuenberger <dimstar(a)opensuse.org> Date: Tue, Mar 28, 2023 at 2:00 PM Subject: 20230326 last snapshot to contain i586 in the main repo To: <factory(a)lists.opensuse.org> Another heads-up to the i586 users, Snpashot 20230326 is the last snapshot that will carry i586 binaries in the main repositories. If you are running a 32-bit installation of Tumbleweed, make sure to check your repositories and have them point to the correct locations: OSS: http://download.opensuse.org/ports/i586/tumbleweed/repo/oss/ NON-OSS: http://download.opensuse.org/ports/i586/tumbleweed/repo/non-oss/ Update: http://download.opensuse.org/ports/i586/update/tumbleweed/ Starting with Snapshot 0328, the i586 binaries will no longer be shipped in the main repository. Cheers, Dominique

5 15

[oS-EN] Questions on Gnome classic
by Carlos E. R. 30 Mar '23

30 Mar '23

Hi, I'm trying gnome classic - what I use normally is XFCE, so the normal gnome is way too different for my taste. The classic seems more comfortable to me. I expected after a reboot to get the same desktop, but no. I had to restart the terminal and gkrellm. When closing, I did not see a tick or something to save the session. Is it somewhere else? When I press [Alt][F2] to type a command, it doesn't autocomplete (XFCE does). Is it a setting somewhere? -- Cheers / Saludos, Carlos E. R. (from Elesar, using openSUSE Leap 15.4)

3 7

El Reg Smiles on 15.5 Beta - good press
by David C. Rankin 30 Mar '23

30 Mar '23

The Register, Has done a test-drive of the 15.5 Beta and provided good ink regarding the experience. Though it hasn't fully kicked the tires, the install was "impeccable". Also noteworthy is the increasing traffic seen by SUSE/openSUSE as user apparently shy away from Ubuntu's "containerized" snappy offering (are you listening SUSE?) Good press is -- good press. https://www.theregister.com/2023/03/28/opensuse_is_thriving_and_leap/ -- David C. Rankin, J.D.,P.E.

1 0

[oS-en] /etc/resolv.conf
by Carlos E. R. 30 Mar '23

30 Mar '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 New machine with 15.4 Name solving not working (after playing with YaST networking module). /etc/resolv.conf was empty. I restarted network nmcli off nmcli on and /etc/resolv.conf was populated, but incorrectly: Laicolasse:~ l /etc/resolv.conf g lrwxrwxrwx 1 root root 26 Mar 27 19:13 /etc/resolv.conf -> /run/netconfig/resolv.conf Laicolasse:~ # cat /etc/resolv.conf ### /etc/resolv.conf is a symlink to /run/netconfig/resolv.conf ### autogenerated by netconfig! # # Before you change this file manually, consider to define the # static DNS configuration using the following variables in the # /etc/sysconfig/network/config file: # NETCONFIG_DNS_STATIC_SEARCHLIST # NETCONFIG_DNS_STATIC_SERVERS # NETCONFIG_DNS_FORWARDER # or disable DNS configuration updates via netconfig by setting: # NETCONFIG_DNS_POLICY='' # # See also the netconfig(8) manual page and other documentation. # ### Call "netconfig update -f" to force adjusting of /etc/resolv.conf. search valinor Laicolasse:~ # See that there is no DNS entry. However: Laicolasse:~ # nmcli eth0: connected to eth0 "Realtek RTL8111/8168/8411" ethernet (r8169), F4:A8:0D:7A:49:01, hw, mtu 1500 ip4 default inet4 192.168.2.17/16 route4 0.0.0.0/0 route4 192.168.0.0/16 inet6 fe80::f6a8:dff:fe7a:4901/64 route6 fe80::/64 lo: unmanaged "lo" loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536 DNS configuration: servers: 80.58.61.254 80.58.61.250 interface: eth0 Use "nmcli device show" to get complete information about known devices and "nmcli connection show" to get an overview on active connection profiles. Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details. Laicolasse:~ # As you see, the DNS information is there. Just not in etc/resolv.conf where it is needed. How do I make it go there? (machine is currently running text mode) - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZCIgORwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV358An1d73/buBx7T2sU7+Y44 DuFnqrkwAJ9WfZ3Vn4uHxz3WrjXD1Iw1RNcgqA== =+amE -----END PGP SIGNATURE-----

4 33

SuSE Linux/openSUSE boxes to give away
by Axel Braun 30 Mar '23

30 Mar '23

Hi, I have a bunch of SuSE Linux/openSUSE boxes to give away: https://paste.opensuse.org/pastes/73af85a65ee3 Except 2 they are complete with book and media. Boxes are for free if you cover the transport - fully free if you pick them up. If you are interested, drop me a mail Cheers Axel

4 3

System rollback
by Roger Oberholtzer 29 Mar '23

29 Mar '23

A colleague did a zypper dup of his Tumbleweed system a bit ago. Seems it borked his system. So he is using a read-only snapshot. I want to help him revert to the state before the backup. He has a standard Tumbleweed layout (initially installed in November, so surely using the current preferred layout). He has made no changes to the system since then. I have read the information related to this here: https://doc.opensuse.org/documentation/leap/reference/html/book-reference/c… Which is pretty good. Before I follow the advice contained there, I am just asking if this is what one should do: 1. Boot with a recent read-only snapshot. We are using the one just before the current non-functioning one. 2. Run: snapper rollback 3. Reboot into the default image That's it? If so, seems too easy. Which makes me suspicious... -- Roger Oberholtzer

3 2

Tumbleweed: Problems with YapStocks Widget in Plasma. Did we change something particular in Tumbleweed with QT?
by Stakanov 28 Mar '23

28 Mar '23

file:///home/entropy/.local/share/plasma/plasmoids/com.librehat.yapstocks/ contents/ui/main.qml:92:5: Type MainPage unavailable file:///home/entropy/.local/share/plasma/plasmoids/com.librehat.yapstocks/ contents/ui/MainPage.qml:109:9: Type PriceChart unavailable file:///home/entropy/.local/share/plasma/plasmoids/com.librehat.yapstocks/ contents/ui/PriceChart.qml:23:1: module "QtCharts" is not installed I was aware of this issue in the past, but normally installing QTCharts did solve. I tried with the qt6 version of charts, did not help, then did a QT5 version install parallel to it but the error persists. This widget worked flawlessly for years now, I am somewhat puzzled about what may have changed, must have been very recently. Any suggestion?

1 0

Leap 15.4 on Lenovo Yoga Slim 7 Pro R5H/16/512 14 - graphics, trackpad, mouse problems
by Per Inge Oestmoen 27 Mar '23

27 Mar '23

Problems with Lenovo Yoga Slim 7 Pro R5H/16/512 14! I have the above machine, but cannot get the graphics, trackpad and mouse to work properly. The problem is that with kernel version 5.14.21-150400.24.46-default (64-bit) the trackpad and mouse works with no problem. However, the screen resolution is limited to 800x600. The screen's native resolution is 2880×1800. Then, I tried to upgrade the kernel, with the kernels found here: https://download.opensuse.org/repositories/Kernel:/stable:/Backport/standar… When I upgrade to one of these kernels, I get 2880×1800. But, there is a big "but" here: The mouse and trackpad do not work properly. The cursor just jumps unpredictably over the screen. As a result, both the mouse and the trackpad become unusable. I then had to go back to the 5.14.21-150400.24.46-default which was installed when I installed Leap 15.4. Then the trackpad (and mouse if I choose to attach it) both work properly again. However, I am then stuck with a very coarse 800x600 screen resolution, which is certainly not functional. There is no way to change the resolution, as far as I can see. So what do I do in order to make the Lenovo Yoga Slim 7 Pro R5H/16/512 14 work with Linux? Is there a known kernel which will do the trick, or is there a way to change the resolution (and also get the correct color depth)? I assume that the correct kernel will solve the situation, but where is it to be found? Here is my machine. You can see the technical data of the machine in detail: http://www.coldsiberia.net/technics/20230318_224141_2000.jpg Sincerely, Per Inge Oestmoen, Norway

2 3

Re: New package xfce4-docklike-plugin
by Liam Proven 25 Mar '23

25 Mar '23

On Sat, 25 Mar 2023 at 17:46, Manfred Hollstein <mhollstein(a)t-online.de> wrote: > > Hi there, > > I'd like to request acceptance of the new package included with our > Xfce4 distribution: > > <https://build.opensuse.org/request/show/1074344> > > Citing from its home page: > > A modern, minimalist taskbar for Xfce. > > Docklike Taskbar behaves similarly to many other desktop environments > and operating systems. Wherein all application windows are grouped > together as an icon and can be pinned to act as a launcher when the > application is not running. Commonly referred to as a dock. > > You can find all details about this new package at the following URL: > > <https://docs.xfce.org/panel-plugins/xfce4-docklike-plugin/start> > > The only thing which I believe is missing there is the hint that you > need a (new) Xfce panel to which you add the new docklike-plugin > allowing you to easily access all your terminal related windows and/or > add your preferred applications you are usually working with. > > HTH, cheers. I 100% endorse this. It's an excellent little plugin that makes Xfce, already by far my favourite desktop on openSUSE, Debian, Fedora etc., far more versatile as well as much more modern-looking. -- Liam Proven ~ Profile: https://about.me/liamproven Email: lproven(a)cix.co.uk ~ gMail/gTalk/FB: lproven(a)gmail.com Twitter/LinkedIn: lproven ~ Skype: liamproven IoM: (+44) 7624 277612: UK: (+44) 7939-087884 Czech [+ WhatsApp/Telegram/Signal]: (+420) 702-829-053

1 0

Repositories problems
by Frank McCormick 25 Mar '23

25 Mar '23

Can someone help me to sort out which repositories I should have enabled on Tumbleweed. This is a followup to problems I posted the other day relative to that huge update. It was suggested at that time I remove certain repositories which I did using YAST. Today I noticed when I do a refresh, then a zypper dup I get this: desktop-tumbleweed frank ~> sudo zypper ref Repository 'Main Repository (NON-OSS)' is up to date. Repository 'Main Repository (OSS)' is up to date. Repository 'Main Update Repository' is up to date. Repository 'Double Commander (openSUSE_Tumbleweed)' is up to date. Repository 'libdvdcss repository' is up to date. Repository 'X11:Utilities' is up to date. Repository 'graphics' is up to date. Repository 'Base:System' is up to date. Repository 'X11:lxde' is up to date. Repository 'openSUSE:Tumbleweed' is up to date. Repository 'openSUSE-20221228-0' is up to date. Repository 'openh264' is up to date. Repository 'Packman' is up to date. Repository 'openSUSE-Tumbleweed-Source' is up to date. Repository 'vivaldi' is up to date. All repositories have been refreshed. desktop-tumbleweed frank ~> sudo zypper dup Loading repository data... Warning: Repository 'openSUSE:Tumbleweed' metadata expired since 2023-03-24 06:25:41 EDT. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Warning: Repository metadata expired: Check if 'autorefresh' is turned on (zypper lr), otherwise manualy refresh the repository (zypper ref). If this does not solve the issue, it could be that you are using a broken mirror or the server has actually discontinued to support the repository. Reading installed packages... Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Computing distribution upgrade... Nothing to do. These are the repositories I have enabled according to zypper: desktop-tumbleweed frank ~> zypper repos Repository priorities in effect: (See 'zypper lr -P' for details) 90 (raised priority) : 2 repositories 99 (default priority) : 13 repositories # | Alias | Name | Enabled | GPG Check | Refresh ---+--------------------------------------+----------------------------------------+---------+-----------+-------- 1 | download.opensuse.org-non-oss | Main Repository (NON-OSS) | Yes | (r ) Yes | Yes 2 | download.opensuse.org-oss | Main Repository (OSS) | Yes | (r ) Yes | Yes 3 | download.opensuse.org-tumbleweed | Main Update Repository | Yes | (r ) Yes | Yes 4 | home_Alexx2000 | Double Commander (openSUSE_Tumbleweed) | Yes | (r ) Yes | Yes 5 | http-opensuse-guide.org-38a6533d | libdvdcss repository | Yes | (r ) Yes | Yes 7 | https-download.opensuse.org-6a0df1c6 | graphics | Yes | (r ) Yes | Yes 9 | https-download.opensuse.org-8feb7d1a | X11:lxde | Yes | (r ) Yes | Yes 6 | https-download.opensuse.org-34a895cf | X11:Utilities | Yes | (r ) Yes | Yes 8 | https-download.opensuse.org-88275063 | Base:System | Yes | (r ) Yes | Yes 10 | https-download.opensuse.org-d98d69c0 | openSUSE:Tumbleweed | Yes | (r ) Yes | Yes 11 | openSUSE-20221228-0 | openSUSE-20221228-0 | Yes | (r ) Yes | Yes 12 | openh264 | openh264 | Yes | (r ) Yes | Yes 13 | packman | Packman | Yes | (r ) Yes | Yes 14 | repo-source | openSUSE-Tumbleweed-Source | Yes | (r ) Yes | Yes 15 | vivaldi | vivaldi | Yes | (r ) Yes | Yes desktop-tumbleweed frank ~> The Vivaldi and Double Commander repos are for app I use regularly. Is the repository which apparently is not refreshing one that should be removed ? Thanks for any and all help.

3 2

repo problems
by Frank McCormick 25 Mar '23

25 Mar '23

The YAST version of my repo list is here: https://paste.opensuse.org/pastes/1a53f68cdab5 Thanks

2 1

FYI
by joe a 25 Mar '23

25 Mar '23

May mean nothing. https://www.theregister.com/2023/03/23/suse_announces_new_ceo_arriving/

8 15

This morning dup on Tumbleweed is strange.
by Frank McCormick 24 Mar '23

24 Mar '23

Attempted a zypper dup on my installation this morning. I got this error messagage on one of the repositories. Warning: File 'repomd.xml' from repository 'openSUSE:Factory' is unsigned. Note: Signing data enables the recipient to verify that no modifications occurred after the data were signed. Accepting data with no, wrong or unknown signature can lead to a corrupted system and in extreme cases even to a system compromise. Note: File 'repomd.xml' is the repositories master index file. It ensures the integrity of the whole repo. Warning: We can't verify that no one meddled with this file, so it might not be trustworthy anymore! You should not continue unless you know it's safe. File 'repomd.xml' from repository 'openSUSE:Factory' is unsigned, continue? [yes/no] (no): Retrieving repository 'openSUSE:Factory' metadata ................................................................................................[error] Repository 'openSUSE:Factory' is invalid. [http-download.opensuse.org-fa10a0de|http://download.opensuse.org/tumbleweed/repo/oss/] Valid metadata not found at specified URL History: - Signature verification failed for repomd.xml - Can't provide /repodata/repomd.xml Please check if the URIs defined for this repository are pointing to a valid repository. Warning: Skipping repository 'openSUSE:Factory' because of the above error. Then zypper told me it was going to upgrade 2063 packages!! It didn't seem reasonable to me so I aborted the upgrade. What should I have done ? Has anyone else experienced this? Thanks

11 50

yet another "I have a strangeness with zypper" thread. Protocol error.... with TW zypper dup.
by Stakanov 23 Mar '23

23 Mar '23

My zypper dup command complains a lot about: - Download error (curl) for 'https://download.opensuse.org/tumbleweed/repo/ oss/x86_64/libX11-xcb1-1.8.4-1.2.x86_64.rpm': Error code: Curl error 92 Error message: HTTP/2 stream 1 was not closed cleanly: PROTOCOL_ERROR (err 1) A new attempt will be made... Eventually then the package will go through and the issue will repeat shortly after with some other package. This lengthens of course the procedure remarkably. One system needed the whole night to do the dup. This with TW on bare metal. My TW instance running on that machine that is KVM had a lot of curl error 55 (canceled after 5 attempts). Now my question is: does the mirror have an issue, does my modem have an issue, or do I have an issue on my local machine with some setup? By guessing I would say the mirror does have a problem with upholding the connection (maybe for server overload) or my internetprovider has a problem with the quality delivered? But you may point me to what is the cause here. Just to be sure that I can or cannot do something about it. I did have a dup of > 3200 packages, but I think this could be normal (maybe some rebuild that forced to update all....

5 6

Re: if some automated p2p method of rsync existed
by Per Jessen 23 Mar '23

23 Mar '23

Carlos E. R. wrote: > This could be improved if some automated p2p method of rsync existed > to propagate the updates also from mirror to mirror. It has to be > invented, AFAIK. Somewhat offtopic, but never mind. It's been too long without a good rant :-) Nothing needs to be "invented", there are various technologies/solutions that could be applied. Distributed filesystems, some sort of internet multicast, maybe super sparrow, content distribution networks. The main hurdle - virtually regardless of which solution - is the mirror operator. She is generally happy to volunteer some Terabytes of disk space, some network bandwidth and 20mins for setting up an rsync cron-job. Some mirror operators (if you are listening here, you know who you are) are certainly very cooperative and more than happy to help out, but to most, running an openSUSE mirror is not a priority. Insignificant hurdles, in comparison - openSUSE Heroes. -- Per Jessen, Zürich (16.8°C) Member, openSUSE Heroes (2016 - present) We're hiring - https://en.opensuse.org/openSUSE:Heroes

2 3

Lost the plasma X11 session option.
by Boyd Lynn Gerber 23 Mar '23

23 Mar '23

Hello, I rebooted my macgine after a kenel update and now no KDE X11 options abailable in Desktop Session choices. Any ideas on how to get back the KDE X11 op[tion? Regards, -- Boyd Gerber <gerberb(a)zenez.com> 801 849-0213 ZENEZ 1042 East Fort Union #135, Midvale Utah 84047

2 2

[oS-en] Can't trigger Firefox remotely
by Carlos E. R. 23 Mar '23

23 Mar '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I used this tiny script, run in my desktop machine, to open firefox in my "mediaserver" and display a youtube there: cer@Telcontar:~> cat /home/cer/bin/IsengardFirefox #!/bin/bash ssh cer(a)isengard.valinor "DISPLAY=:0 firefox $1 $2 $3" cer@Telcontar:~> Both machines have been upgraded to 15.4 since then, and now the script fails: cer@Telcontar:~> IsengardFirefox https://www.youtube.com/watch?v=Y-4S7cdo3tY Invalid MIT-MAGIC-COOKIE-1 keyNo protocol specified Error: cannot open display: :0 cer@Telcontar:~> This is a solution we concocted on this thread: Archived-At: <https://lists.opensuse.org/archives/list/users@lists.opensuse.org/message/2…> Date: Sun, 18 Sep 2022 14:01:49 +0200 (CEST) From: "Carlos E. R." <robin.listas(a)telefonica.net> To: oS-en <users(a)lists.opensuse.org> Subject: [oS-en] How can I fire up firefox on another computer using ssh? Why doesn't it work now? Verbose try: cer@Telcontar:~> IsengardFirefox https://www.youtube.com/watch?v=Y-4S7cdo3tY OpenSSH_8.4p1, OpenSSL 1.1.1l 24 Aug 2021 SUSE release 150400.7.25.1 debug1: Reading configuration data /home/cer/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 20: Applying options for * debug1: Connecting to isengard.valinor [192.168.1.16] port 22. debug1: Connection established. debug1: identity file /home/cer/.ssh/id_rsa type 0 debug1: identity file /home/cer/.ssh/id_rsa-cert type -1 debug1: identity file /home/cer/.ssh/id_dsa type 1 debug1: identity file /home/cer/.ssh/id_dsa-cert type -1 debug1: identity file /home/cer/.ssh/id_ecdsa type -1 debug1: identity file /home/cer/.ssh/id_ecdsa-cert type -1 debug1: identity file /home/cer/.ssh/id_ecdsa_sk type -1 debug1: identity file /home/cer/.ssh/id_ecdsa_sk-cert type -1 debug1: identity file /home/cer/.ssh/id_ed25519 type -1 debug1: identity file /home/cer/.ssh/id_ed25519-cert type -1 debug1: identity file /home/cer/.ssh/id_ed25519_sk type -1 debug1: identity file /home/cer/.ssh/id_ed25519_sk-cert type -1 debug1: identity file /home/cer/.ssh/id_xmss type -1 debug1: identity file /home/cer/.ssh/id_xmss-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_8.4 debug1: Remote protocol version 2.0, remote software version OpenSSH_8.4 debug1: match: OpenSSH_8.4 pat OpenSSH* compat 0x04000000 debug1: Authenticating to isengard.valinor:22 as 'cer' debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: algorithm: curve25519-sha256 debug1: kex: host key algorithm: ecdsa-sha2-nistp256 debug1: kex: server->client cipher: chacha20-poly1305(a)openssh.com MAC: <implicit> compression: none debug1: kex: client->server cipher: chacha20-poly1305(a)openssh.com MAC: <implicit> compression: none debug1: kex: curve25519-sha256 need=64 dh_need=64 debug1: kex: curve25519-sha256 need=64 dh_need=64 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ecdsa-sha2-nistp256 SHA256:IL.... debug1: Host 'isengard.valinor' is known and matches the ECDSA host key. debug1: Found key in /home/cer/.ssh/known_hosts:65 debug1: rekey out after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: rekey in after 134217728 blocks debug1: Skipping ssh-dss key /home/cer/.ssh/id_dsa - not in PubkeyAcceptedKeyTypes debug1: Skipping ssh-dss key carloser(a)cvs.sf.net - not in PubkeyAcceptedKeyTypes debug1: Skipping ssh-dss key carloser(a)shell.sf.net - not in PubkeyAcceptedKeyTypes debug1: Skipping ssh-dss key carloser(a)cf.sf.net - not in PubkeyAcceptedKeyTypes debug1: Will attempt key: /home/cer/.ssh/id_rsa RSA SHA256:domyQmwzSv4RGTBnyqQtTl5MSxLX9JYfyFL5sMqDEYE agent debug1: Will attempt key: cer@nimrodel RSA SHA256:lD... agent debug1: Will attempt key: /home/cer/.ssh/id_ecdsa debug1: Will attempt key: /home/cer/.ssh/id_ecdsa_sk debug1: Will attempt key: /home/cer/.ssh/id_ed25519 debug1: Will attempt key: /home/cer/.ssh/id_ed25519_sk debug1: Will attempt key: /home/cer/.ssh/id_xmss debug1: SSH2_MSG_EXT_INFO received debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,sk-ssh-ed25519@openssh.com,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ecdsa-sha2-nistp256@openssh.com,webauthn-sk-ecdsa-sha2-nistp256@openssh.com> debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/cer/.ssh/id_rsa RSA SHA256:domy... agent debug1: Server accepts key: /home/cer/.ssh/id_rsa RSA SHA256:domy... agent debug1: Authentication succeeded (publickey). Authenticated to isengard.valinor ([192.168.1.16]:22). debug1: channel 0: new [client-session] debug1: Requesting no-more-sessions(a)openssh.com debug1: Entering interactive session. debug1: pledge: network debug1: client_input_global_request: rtype hostkeys-00(a)openssh.com want_reply 0 debug1: Remote: /home/cer/.ssh/authorized_keys:8: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding debug1: Remote: /home/cer/.ssh/authorized_keys:8: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding debug1: Sending command: DISPLAY=:0 firefox https://www.youtube.com/watch?v=Y-4S7cdo3tY Invalid MIT-MAGIC-COOKIE-1 keyNo protocol specified Error: cannot open display: :0 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype eow(a)openssh.com reply 0 debug1: channel 0: free: client-session, nchannels 1 Transferred: sent 2884, received 3088 bytes, in 0.6 seconds Bytes per second: sent 4834.0, received 5175.9 debug1: Exit status 1 cer@Telcontar:~> - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZBBB1Bwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVXzAAnRC+uQwNE4NhAqs47gfd USocx779AJ9GBbjI+NpGbW+dytHvX8jo7CSyLQ== =8iiA -----END PGP SIGNATURE-----

7 22

[oS-en] Speed testing rotating rust
by Carlos E. R. 22 Mar '23

22 Mar '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 read test: Telcontar:/data/storage_b/copias_usb_drives # hdparm -tT /dev/sde ; hdparm -tT /dev/sde ; hdparm -tT /dev/sde1 ; hdparm -tT /dev/sde1 /dev/sde: Timing cached reads: 27628 MB in 2.00 seconds = 13836.78 MB/sec Timing buffered disk reads: 358 MB in 3.01 seconds = 119.01 MB/sec /dev/sde: Timing cached reads: 27426 MB in 2.00 seconds = 13737.03 MB/sec Timing buffered disk reads: 390 MB in 3.00 seconds = 129.96 MB/sec /dev/sde1: Timing cached reads: 27798 MB in 2.00 seconds = 13921.69 MB/sec Timing buffered disk reads: 390 MB in 3.01 seconds = 129.52 MB/sec /dev/sde1: Timing cached reads: 27474 MB in 2.00 seconds = 13759.55 MB/sec Timing buffered disk reads: 388 MB in 3.00 seconds = 129.26 MB/sec Telcontar:/data/storage_b/copias_usb_drives/20230321 Seagate 2TB - Para_Pili # Read test with dd: Telcontar:/data/storage_b/copias_usb_drives # time dd if=/dev/zero of=dummy bs=1GiB count=1 oflag=direct 1+0 records in 1+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 6.54187 s, 164 MB/s real 0m6.545s user 0m0.005s sys 0m0.149s Telcontar:/data/storage_b/copias_usb_drives # Ok, that is normal. Write test: Telcontar:/data/storage_b/copias_usb_drives/mnt # time dd if=/dev/zero of=dummy bs=1GiB count=1 oflag=direct ; l -h dummy 1+0 records in 1+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 0.533335 s, 2.0 GB/s real 0m0.536s user 0m0.000s sys 0m0.152s - -rwxrwxrwx 1 root root 1.0G Mar 22 20:01 dummy* Telcontar:/data/storage_b/copias_usb_drives/mnt # time dd if=/dev/zero of=dummy bs=1GiB count=10 oflag=direct ; l -h dummy 10+0 records in 10+0 records out 10737418240 bytes (11 GB, 10 GiB) copied, 27.5384 s, 390 MB/s real 0m27.542s user 0m0.000s sys 0m1.501s - -rwxrwxrwx 1 root root 10G Mar 22 20:02 dummy* Telcontar:/data/storage_b/copias_usb_drives/mnt # time dd if=/dev/zero of=dummy bs=1GiB count=20 oflag=direct ; l -h dummy 20+0 records in 20+0 records out 21474836480 bytes (21 GB, 20 GiB) copied, 142.6 s, 151 MB/s real 2m22.604s user 0m0.000s sys 0m3.054s - -rwxrwxrwx 1 root root 20G Mar 22 20:04 dummy* Telcontar:/data/storage_b/copias_usb_drives//mnt # I don't understand how the write can be that fast. It is a cheap Seagate external 2.5 rotating rust thing. It can not have a huge internal ram cache, and the oflag=direct should disable the kernel buffer. mount: /dev/sde1 on /data/storage_b/copias_usb_drives/mnt type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) Telcontar:~ # file -s /dev/sde1 /dev/sde1: DOS/MBR boot sector, code offset 0x52+2, OEM-ID "NTFS ", sectors/cluster 8, Media descriptor 0xf8, sectors/track 63, heads 255, hidden sectors 64, dos < 4.0 BootSector (0x80), FAT (1Y bit by descriptor); NTFS, sectors/track 63, sectors 3907024064, $MFT start cluster 786432, $MFTMirror start cluster 2, bytes/RecordSegment 2^(-1*246), clusters/index block 1, serial number 0a8b67aebb67aba00; containsMicrosoft Windows XP/VISTA bootloader BOOTMGR Telcontar:~ # - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZBtTahwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVjY4An03d/kCDX4klF97pvgV9 IBwCZBmzAJsHCeVWel4ux388OyAKjns2kPCZvw== =MUlt -----END PGP SIGNATURE-----

1 0

Problem Running ADB fastboot tools on TW
by Stakanov 22 Mar '23

22 Mar '23

Host is Tumbleweed. Java is: entropy@localhost:~> java --version openjdk 11.0.18 2023-01-17 OpenJDK Runtime Environment (build 11.0.18+0-suse-3.1-x8664) OpenJDK 64-Bit Server VM (build 11.0.18+0-suse-3.1-x8664, mixed mode) entropy@localhost:~> Now when trying to simply click on it, it gives a window with the uncompressed jar file (which is not what I want, and yes, I have made it executable after downloading. When telling TW to run the jar file with java (e.g. in a terminal to get output of what goes wrong here), it complains as follows: Errore: impossibile trovare o caricare la classe principale .home.entropy.bin.XiaomiADBFastbootTools.jar Causato da: java.lang.ClassNotFoundException: /home/entropy/bin/ XiaomiADBFastbootTools/jar what do I do wrongly, what is my problem here. Anybody having experience with starting this program is highly welcome to comment. Thank you in advance.

3 8

TW update: unexpected file sizes
by Pit Suetterlin 21 Mar '23

21 Mar '23

Hi list, just did a DUP on my TW laptop (i.e., to TW20230318) and got two complaints about file size mismatches: Downloaded data exceeded the expected filesize '14.6 KiB' of 'http://download.opensuse.org/repositories/science/openSUSE_Tumbleweed/noarc…'. Downloaded data exceeded the expected filesize '151.5 KiB' of 'http://download.opensuse.org/repositories/science/openSUSE_Tumbleweed/noarc…'. Their "master"(Printrun-common-2.0.0~rc7.1599393390.c451359-24.151.x86_64.rpm) seems OK. Anyone else seen this? Cache/Mirror issue? Or something serious to report (where?)

1 0

[oS-EN] Something is changing the EFI boot order on me.
by Carlos E. R. 19 Mar '23

19 Mar '23

Hi, I did a maintenance routine update (Leap 15.4), and on reboot, the machine did not boot the main system, but the auxiliary one. I couldn't boot the main one from its grub menu, another error. On entry, I run "efibootmgr -v" and I see that the "main-os" entry was not in the "BootOrder". So I edit it back, and reboot. I also did an update of this auxiliary system, which is running 15.2. So I get to boot the "main" system, then I reboot again, and choose in the "bios" to boot the auxiliary system to let it purge kernels. I run again "efibootmgr -v", by chance, and see that the order is, again, altered (sorry about line wrap): > Andor:~ # efibootmgr -v > BootCurrent: 0001 > Timeout: 1 seconds > BootOrder: 0003,0000,0001 > Boot0000* main-os-secureboot HD(1,GPT,800b649f-a2e3-4dad-b2bf-b7ecc5ef11d8,0x800,0xfa000)/File(\EFI\MAIN-OS\SHIM.EFI) > Boot0001* auxiliary-secureboot HD(1,GPT,800b649f-a2e3-4dad-b2bf-b7ecc5ef11d8,0x800,0xfa000)/File(\EFI\AUXILIARY\SHIM.EFI) > Boot0003* UEFI OS HD(1,GPT,800b649f-a2e3-4dad-b2bf-b7ecc5ef11d8,0x800,0xfa000)/File(\EFI\BOOT\BOOTX64.EFI)..BO > Andor:~ # Who has put first the entry number 3? It can not boot, it contains an ancient BOOTX64.EFI. So I put it back: Andor:~ # efibootmgr --bootorder 0000,0001,0003 BootCurrent: 0001 Timeout: 1 seconds BootOrder: 0000,0001,0003 Boot0000* main-os-secureboot Boot0001* auxiliary-secureboot Boot0003* UEFI OS Andor:~ # I will now send this email, hope to boot "main-os" and check again the boot order. -- Cheers / Saludos, Carlos E. R. (from Andor, using openSUSE Leap 15.2)

3 7

[oS-en] tracker-extract 25206 - - Locale 'LANG' is not set, defaulting to C locale
by Carlos E. R. 19 Mar '23

19 Mar '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I get literally thousands of that message spamming my logs. Googling a bit, I decided to edit /etc/xdg/autostart/tracker-miner-fs-3.desktop: I changed: Exec=/usr/lib/tracker-miner-fs-3 to: Exec=LANG=en_US.UTF-8 /usr/lib/tracker-miner-fs-3 But this did not work (I'm unsure the syntax is correct, anyway, with two '=' symbols. I have the file "/etc/xdg/autostart/tracker-extract.desktop" only in backups from 2018 or 2017, but not in the current system. Where can I change the LANG for "tracker-extract" to try eliminate that nuisance message? (Yes, my user does have LANG set) This is on Leap 15.4. The complete sequence seems to be this: <3.6> 2023-03-19T16:47:03.165293+01:00 Telcontar dbus-daemon 6597 - - [session uid=1000 pid=6597] Successfully activated service 'org.freedesktop.Tracker3.Miner.Extract' <3.6> 2023-03-19T16:47:45.077197+01:00 Telcontar dbus-daemon 6597 - - [session uid=1000 pid=6597] Activating via systemd: service name='org.freedesktop.Tracker3.Miner.Extract' unit='tracker-extract-3.service' requested by ':1.65' (uid=1000 pid=8348 comm="/usr/lib/tracker-miner-fs-3 ") <1.4> 2023-03-19T16:47:45.221328+01:00 Telcontar tracker-extract 25667 - - Locale 'LANG' is not set, defaulting to C locale <3.6> 2023-03-19T16:47:45.221430+01:00 Telcontar dbus-daemon 6597 - - [session uid=1000 pid=6597] Successfully activated service 'org.freedesktop.Tracker3.Miner.Extract' <3.6> 2023-03-19T16:48:22.990217+01:00 Telcontar dbus-daemon 6597 - - [session uid=1000 pid=6597] Activating via systemd: service name='org.freedesktop.Tracker3.Miner.Extract' unit='tracker-extract-3.service' requested by ':1.65' (uid=1000 pid=8348 comm="/usr/lib/tracker-miner-fs-3 ") <1.4> 2023-03-19T16:48:23.118752+01:00 Telcontar tracker-extract 25688 - - Locale 'LANG' is not set, defaulting to C locale <3.6> 2023-03-19T16:48:23.118870+01:00 Telcontar dbus-daemon 6597 - - [session uid=1000 pid=6597] Successfully activated service 'org.freedesktop.Tracker3.Miner.Extract' <3.6> 2023-03-19T16:49:53.256461+01:00 Telcontar dbus-daemon 6597 - - [session uid=1000 pid=6597] Activating via systemd: service name='org.freedesktop.Tracker3.Miner.Extract' unit='tracker-extract-3.service' requested by ':1.65' (uid=1000 pid=8348 comm="/usr/lib/tracker-miner-fs-3 ") and this one: <1.4> 2023-03-19T16:48:23.118752+01:00 Telcontar tracker-extract 25688 - - Locale 'LANG' is not set, defaulting to C locale goes to /var/log/warn. - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZBcwYxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV3/4AoI73kAiJjA1Dty2+X9+h GveNNxx7AJ9/XkqEov0wlYZ8+z+QFdKZMFlcNQ== =Dii6 -----END PGP SIGNATURE-----

4 3

[oS-en] [Rant] Why so many debug messages are going to the /var/log/warn log file?
by Carlos E. R. 19 Mar '23

19 Mar '23

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Why so many debug messages are going to the /var/log/warn log file? For example: <1.3> 2023-03-09T21:28:27.225193+01:00 Telcontar xsane - - - io/hpmud/model.c 532: no hp_HP_Color_LaserJet_CP1515n attributes found in /usr/share/hplip/data/models/models.dat <1.3> 2023-03-09T21:28:27.228248+01:00 Telcontar xsane - - - io/hpmud/model.c 543: no hp_HP_Color_LaserJet_CP1515n attributes found in /usr/share/hplip/data/models/unreleased/unreleased.dat Well, it is a printer only, but xsane is looking to see if it has a scanner and not finding it. Why is that so huge a problem that I have to be warned about it? I don't care. The programmer might want to see it, but users have no need to see it. Yet it has priority 3. It should be a debug message. For the programmer. #define KERN_EMERG "<0>" /* system is unusable */ #define KERN_ALERT "<1>" /* action must be taken immediately */ #define KERN_CRIT "<2>" /* critical conditions */ #define KERN_ERR "<3>" /* error conditions */ #define KERN_WARNING "<4>" /* warning conditions */ #define KERN_NOTICE "<5>" /* normal but significant condition */ #define KERN_INFO "<6>" /* informational */ #define KERN_DEBUG "<7>" /* debug-level messages */ There are many more. <1.4> 2023-03-09T23:11:37.426440+01:00 Telcontar tracker-extract 24161 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:20:54.003175+01:00 Telcontar tracker-extract 24897 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:21:36.812011+01:00 Telcontar tracker-extract 24927 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:22:05.421592+01:00 Telcontar tracker-extract 24950 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:22:43.379085+01:00 Telcontar tracker-extract 24973 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:23:08.342804+01:00 Telcontar tracker-extract 24991 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:25:31.775909+01:00 Telcontar tracker-extract 25112 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T23:26:15.878323+01:00 Telcontar tracker-extract 25144 - - Locale 'LANG' is not set, defaulting to C locale Why is that a warning, and spamming the WARNING log? <1.4> 2023-03-09T21:45:20.910119+01:00 Telcontar krusader 17147 - - QCoreApplication::applicationDirPath: Please instantiate the QApplication object first <1.4> 2023-03-09T21:45:21.655721+01:00 Telcontar krusader 17147 - - 21:45:21.655-warning default unknown@0 # QWidget::insertAction: Attempt to insert null action <1.4> 2023-03-09T21:45:21.657776+01:00 Telcontar krusader 17147 - - 21:45:21.657-warning default unknown@0 # QWidget::insertAction: Attempt to insert null action <1.4> 2023-03-09T21:45:21.666504+01:00 Telcontar krusader 17147 - - 21:45:21.666-warning kf.i18n unknown@0 # Trying to convert empty KLocalizedString to QString. <1.4> 2023-03-09T21:53:41.223609+01:00 Telcontar tracker-extract 17950 - - Locale 'LANG' is not set, defaulting to C locale <1.4> 2023-03-09T22:20:14.013742+01:00 Telcontar krusader 6836 - - 22:20:14.012-warning kf.kio.widgets unknown@0 # Failed to check which JobView API is supported "The name org.kde.kuiserver was not provided by any .service files" Ditto. 1.4> 2023-03-09T19:07:32.113665+01:00 Telcontar tumblerd 4988 - - Name org.freedesktop.thumbnails.Cache1 lost on the message dbus, exiting. <1.4> 2023-03-09T19:07:32.113782+01:00 Telcontar tumblerd 4988 - - Name org.freedesktop.thumbnails.Manager1 lost on the message dbus, exiting. <1.4> 2023-03-09T19:07:32.113857+01:00 Telcontar tumblerd 4988 - - Name org.freedesktop.thumbnails.Thumbnailer1 lost on the message dbus, exiting. There are so many messages going as WARNINGS that the truly important ones are ignored. Sometimes I write a rule on rsyslog to clear some, but there are so many! if $syslogfacility == 1 and $syslogseverity == 4 and $programname == 'tracker-extract' \ and $msg contains "Locale 'LANG' is not set, defaulting to C locale" \ then -/var/log/pruned.warn & stop Maybe I should filter out entire programs: if $syslogfacility == 1 and $syslogseverity == 4 and ($programname == 'tracker-extract' or $programname == 'kglobalaccel5' or $programname == 'tumblerd' or $programname == 'krusader') \ then -/var/log/pruned.warn & stop This is like shouting WOLF! every day. When the wolf comes, nobody listens. - -- Cheers Carlos E. R. (from 15.4 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCZAphHRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVZgAAoJMABOTAlYBMsczWniyX 0Y329uOeAJ9izLcUwLTMKE/KrerMkzRF/qPMBA== =OfdZ -----END PGP SIGNATURE-----

6 31

Copying /home
by Mark Misulich 18 Mar '23

18 Mar '23

Hi, I'm trying to copy my home files from one computer to another using rsync. I had already copied some files from home to the new computer with a usb stick, and want to update the information to include all additions to files on the old computer to the new computer. The two computers are linked via cat5 through my my router. I'm going to switch my computer for a newer build, the one I'm using as the source is around 15 years old so I want to transfer all my stored data in /home in the old computer to /home in the new computer. I'm asking the list to look over the bash commands that I've researched to make sure I've got it right. $ ssh lxmark(a)xxx.xxx.x.x (enter) then yes then enter pasword for user on the destination computer $ rsync -av /home/mark/ lxmark@xxx.xxx.x.x:/home/lxmark Thanks, Mark

19 100

update problem with imlib2
by Frank McCormick 18 Mar '23

18 Mar '23

I am a relatively new user of Tumbleweed so I am unfamiliar with the best course in this update problem. zypper dup gives me this: Computing distribution upgrade... Problem: the to be installed imlib2-devel-1.11.0-80.1.x86_64 requires 'libImlib2-1 = 1.11.0', but this requirement cannot be provided not installable providers: libImlib2-1-1.11.0-80.1.i586[https-download.opensuse.org-6a0df1c6] libImlib2-1-1.11.0-80.1.x86_64[https-download.opensuse.org-6a0df1c6] Solution 1: install imlib2-devel-1.10.0-1.3.x86_64 from vendor openSUSE replacing imlib2-devel-1.10.0-79.9.x86_64 from vendor obs://build.opensuse.org/graphics Solution 2: install libImlib2-1-1.11.0-80.1.x86_64 from vendor obs://build.opensuse.org/graphics replacing libImlib2-1-1.10.0-1.3.x86_64 from vendor openSUSE Solution 3: keep obsolete imlib2-devel-1.10.0-79.9.x86_64 Solution 4: break imlib2-devel-1.11.0-80.1.x86_64 by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/3/4/c/d/?] (c): What's the best move in this situation. I had the same problem earlier but forget what I chose and as a result my taskbar tint2 started showing blank squares instead of the proper icons and the .xsession-errors file was filled with errors. Thank for any help Frank

4 9

Buggy kernel update?
by James Knott 18 Mar '23

18 Mar '23

Today, both my computers got a kernel update and both are dead in the water, unless I boot a previous kernel. This is on a desktop system, with Gigabyte mom board and a ThinkPad. They lock up immediately after the boot menu, requiring killing the power to clear. Has anyone else noticed this? BTW, in the twenty odd years I've been running Linux, this is the first time I had to resort to using a previous kernel.

6 8

yesterday's X issue - xauth is all that is needed.
by Per Jessen 17 Mar '23

17 Mar '23

This issue has been gnawing at me all day. It seems to me that Carlos' use case is so straight forward, it should Just Work (R), i.e. without magical incantations and mysterious work-arounds :-) xauth is all that is needed. I admit I have not yet fully grasped exactly what's going on: I have two systems - destination = toshiba1 with Leap 15.2 and KDE origin = office68 with Leap 15.3 and KDE When physically logged in on toshiba1: In: xauth generate :0 . Out: Invalid MIT-MAGIC-COOKIE-1 key Check results with "xauth list", there ought to be a new line with toshiba1/unix:0 MIT-MAGIC-COOKIE-1 <hexkey> Physically logged in on office68: ssh toshiba1 xauth list grab the hexkey, paste it here: xauth add :0 . hexkey With this, I can start an xclock from office68 on toshiba1 thus: ssh toshiba1 DISPLAY=:0 xclock I can also start e.g. okular, kmines, kicad, but firefox doesn't seem to quite work. At least I was unable to connect to an existing instance - when I tried with "--new-instance", I got a pop up about needing a new profile. Closing down the running firefox (on toshiba1), and it worked fine. By default, the generated key expires after 60 seconds of inactivity, but there is a timeout option. Just trying that out now. -- Per Jessen, Zürich (9.4°C) Member, openSUSE Heroes (2016 - present) We're hiring - https://en.opensuse.org/openSUSE:Heroes

5 25

Problem with update because of apparent conflict with telegram dependencies
by Stakanov 16 Mar '23

16 Mar '23

entropy@localhost:~> sudo LC_ALL=en sudo zypper dup Loading repository data... Reading installed packages... Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Computing distribution upgrade... 2 Problems: Problem: problem with the installed libswresample4-5.1.2-16.2.x86_64 Problem: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-5-mini-libs-5.1.2-10.1.x86_64 Problem: problem with the installed libswresample4-5.1.2-16.2.x86_64 Solution 1: deinstallation of libswresample4-5.1.2-16.2.x86_64 Solution 2: keep obsolete libswresample4-5.1.2-16.2.x86_64 Solution 1: deinstallation of libswresample4-5.1.2-16.2.x86_64 so if we try we get: Problem: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-5-mini-libs-5.1.2-10.1.x86_64 Solution 1: install libavutil57-5.1.2-10.1.x86_64 from vendor openSUSE replacing libavutil57-5.1.2-16.2.x86_64 from vendor http:// packman.links2linux.de Solution 2: deinstallation of telegram-desktop-4.6.5-3.1.x86_64 Solution 3: keep obsolete libavutil57-5.1.2-16.2.x86_64 Solution 4: break ffmpeg-5-mini-libs-5.1.2-10.1.x86_64 by ignoring some of its dependencies so, or you get into dependency hell from the packman side or you have a problem with telegram. I refrain for now from a bug report (as I have no membership of factory since they do not wish people to post there. Good, posting it here. If you try with 1: Computing distribution upgrade... 2 Problems: Problem: the to be installed libpostproc56-5.1.2-pm1599.17.1.x86_64 requires 'libavutil57 = 5.1.2-pm1599.17.1', but this requirement cannot be provided Problem: nothing provides 'this-is-only-for-build-envs' needed by the to be installed ffmpeg-5-mini-libs-5.1.2-10.1.x86_64 Problem: the to be installed libpostproc56-5.1.2-pm1599.17.1.x86_64 requires 'libavutil57 = 5.1.2-pm1599.17.1', but this requirement cannot be provided not installable providers: libavutil57-5.1.2-pm1599.17.1.i586[packman] libavutil57-5.1.2-pm1599.17.1.x86_64[packman] Solution 1: install libpostproc56-5.1.2-10.1.x86_64 from vendor openSUSE replacing libpostproc56-5.1.2-16.2.x86_64 from vendor http:// packman.links2linux.de Solution 2: do not install libavutil57-5.1.2-10.1.x86_64 Solution 3: break libpostproc56-5.1.2-pm1599.17.1.x86_64 by ignoring some of its dependencies and so on and so forth.

4 4

Bug 1203600 fixed or not?
by Philippe Andersson 16 Mar '23

16 Mar '23

Hello List, Bug 1203600 - tar extract fails with Unexpected inconsistency when making directory (https://bugzilla.suse.com/show_bug.cgi?id=1203600) was supposedly fixed in tar package version 'tar-1.34-150000.3.22.3', but we still see the same symptoms (in a "real life" scenario -- we're not using the reproducer) with tar-1.34-150000.3.31.1.x86_64 (= latest one) on a SLES 15 SP4 system. Should I re-open the bug, or is this regression already known and tracked somewhere else? Thanks in advance for any pointers. Ph. A. -- *Philippe Andersson* Unix System Administrator IBA Particle Therapy | Tel: +32-10-475.983 Fax: +32-10-487.707 eMail: pan(a)iba-group.com <http://www.iba-worldwide.com> Disclaimer | Use of IBA e-communication<https://iba-worldwide.com/disclaimer> The contents of this e-mail message and any attachments are intended solely for the recipient (s) named above. This communication is intended to be and to remain confidential and may be protected by intellectual property rights. Any use of the information contained herein (including but not limited to, total or partial reproduction, communication or distribution of any form) by persons other than the designated recipient(s) is prohibited. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free. Ion Beam Applications does not accept liability for any such errors. Thank you for your cooperation.

1 0

TW20230312: No (wired) network with kernel 6.2.2
by Pit Suetterlin 16 Mar '23

16 Mar '23

Hi list, I just DUPed my laptop to the latest TW (20230312), and was left without (wired) network :( From the journal: Mar 14 13:09:35 woodstock.pitnet NetworkManager[950]: <info> [1678795775.3538] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/6) Mar 14 13:09:35 woodstock.pitnet kernel: e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:cf:13:43 Mar 14 13:09:35 woodstock.pitnet kernel: e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection Mar 14 13:09:35 woodstock.pitnet kernel: e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF Mar 14 13:09:35 woodstock.pitnet NetworkManager[950]: <info> [1678795775.3881] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external') Mar 14 13:09:35 woodstock.pitnet systemd-networkd[826]: eth0: Link UP Mar 14 13:09:38 woodstock.pitnet systemd-networkd[826]: eth0: Gained carrier Mar 14 13:09:38 woodstock.pitnet kernel: e1000e 0000:00:1f.6 eth0: NIC Link is Up 10 Mbps Full Duplex, Flow Control: None Mar 14 13:09:38 woodstock.pitnet kernel: e1000e 0000:00:1f.6 eth0: 10/100 speed: disabling TSO Mar 14 13:09:38 woodstock.pitnet kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Mar 14 13:09:38 woodstock.pitnet NetworkManager[950]: <info> [1678795778.9629] device (eth0): carrier: link connected Mar 14 13:09:38 woodstock.pitnet NetworkManager[950]: <info> [1678795778.9633] device (eth0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed') Mar 14 13:09:38 woodstock.pitnet NetworkManager[950]: <info> [1678795778.9642] device (eth0): Activation: starting connection 'Wired connection 1' (44d9a1e3-ba1a-3cd2-b746-b172b9ac4f84) Mar 14 13:09:38 woodstock.pitnet NetworkManager[950]: <info> [1678795778.9643] device (eth0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed') Mar 14 13:09:39 woodstock.pitnet NetworkManager[950]: <info> [1678795779.0713] device (eth0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed') Mar 14 13:09:39 woodstock.pitnet NetworkManager[950]: <info> [1678795779.0723] device (eth0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed') Mar 14 13:09:39 woodstock.pitnet NetworkManager[950]: <info> [1678795779.0727] dhcp4 (eth0): activation: beginning transaction (timeout in 45 seconds) Mar 14 13:09:39 woodstock.pitnet systemd-networkd[826]: eth0: Lost carrier What? 10Mbps? What happened there? Booting with the previous kernel (6.1.12) everything works Mar 14 13:14:00 woodstock.pitnet kernel: e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Anyone else having issues with the network, or hints what has changed?

4 8