September 2020 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Strange partition on new computer
by Carlos E. R. 04 Sep '20

04 Sep '20

On 04/09/2020 12.51, Ariez Vachha - openSUSE wrote: Side note: your post to the mail list did not make it, I only have your cc to me. You used html and thus it was rejected. [...] Ah, I see you noticed and posted again :-) > Hi, > > Try this can't remember where I got it from but it works for me. > > I found you can leave the password blank if you did not set one up at > install time. > > * Install dislocker > > * Make mount points e.g.: > o mkdir /mnt/bitlocker > o mkdir /mnt/bitlockermount > > * Unlock the filesystem with dislocker (/see man page for full details/) > o dislocker <partition> -u<password> -- /mnt/bitlocker > + Filesystem will be unlocked as a file > /mnt/bitlocker/dislocker-file > > * Now mount the filesystem file in the usual way > o mount /mnt/bitlocker/dislocker-file /mnt/bitlockermount > > * To unmount > o umount /mnt/bitlockermount > o umount /mnt/bitlocker > Thanks, this is very interesting :-) -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)

1 0

[opensuse] Re: [opensuse-support] Speller and Thunderbird.
by Carlos E. R. 04 Sep '20

04 Sep '20

On 03/09/2020 02.52, Tomas Kuchta wrote: > On Wed, Sep 2, 2020, 13:16 Carlos E. R. <> <>> wrote: > On 02/09/2020 22.01, Doug McGarrett wrote: You forgot to email to the list. Redirecting. > What I don't understand is why it doesn't see the word in the personal > dictionary, with just one letter difference from the incorrect one,> as a> suggestion. If that difference happens in an "official" word, I> mean, it> is in the main dictionary, it finds the match. > Just speculating ... > > Could it be that the main dictionary has additional metadata about word > type and relationship - thus allowing better "repair/suggestions"? > Whereas user dictionary is simple list with lower priority and simpler > algorithm .... Certainly. Looking at my home files, I see: cer@Telcontar:~> l .aspell.* -rw-r--r-- 1 cer users 9578 Aug 27 23:45 .aspell.en.prepl -rw-r--r-- 1 cer users 542 Aug 27 23:45 .aspell.en.pws -rw-r--r-- 1 cer users 1427 Oct 17 2019 .aspell.es.prepl -rw-r--r-- 1 cer users 945 Oct 17 2019 .aspell.es.pws -rw-r--r-- 1 cer users 36 Sep 4 2009 .aspell.fr.prepl -rw-r--r-- 1 cer users 22 Sep 4 2009 .aspell.fr.pws cer@Telcontar:~> I don't think these are what Thunderbird uses, because the Canadian variant is not there. But .aspell.en.prepl has: personal_repl-1.1 en 0 releave relieve inmigration immigration cancelling canceling loggin login .... Ie, incorrect-correct pairs. The other file is different: personal_ws-1.1 en 66 KiB wiki IANAL reiserfs ... Telefónica No pairs. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)

4 5

[opensuse] no manpages
by ken 04 Sep '20

04 Sep '20

$ man ls If 'man' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf man $ whereis man man: /usr/bin/man /usr/local/man /usr/share/man /usr/share/man/man1/man.1.gz /usr/share/man/man1p/man.1p.gz /usr/share/man/man7mp/man.7mp.gz $ ll /usr/bin/man lrwxrwxrwx 1 root root 21 Aug 27 08:48 /usr/bin/man -> /etc/alternatives/man $ ll /etc/alternatives/man lrwxrwxrwx 1 root root 23 Aug 6 01:29 /etc/alternatives/man -> /usr/lib/man-db/wrapper $ ll /usr/lib/man-db/wrapper ls: cannot access '/usr/lib/man-db/wrapper': No such file or directory The actual (preformatted) manpages are under /usr/share/man, but it needs an executable and proper links to display them. Seems to be some code missing. What's going on? What's the fix? tnx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 17

[opensuse] from plasma to xfce :-)
by jdd＠dodin.org 04 Sep '20

04 Sep '20

I can't make kde/plasma accept my full hd script (see other thread), so I may as well revert to xfce that do (keeping kde apps). I have just now two things I miss from kde, are they feasible with xfce?: * make applications (thunderbird, firefox, chromium, kpat) open always on the same desktop/workspace? * have all the open applications icons available in the taskbar, not only the current desktop/workspace? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 11

[opensuse] projectM failure
by Marc Chamberlin 04 Sep '20

04 Sep '20

Hi - I am running OpenSuSE 15.2 with the KDE desktop on my media center computer (freshly installed) and I tried to start Clementine (no problems) and tried to start the projectM visualizer. In the past I never had much trouble with this but this time projectM is spitting out the following error message when I try to start it manually. Anyone care to translate and suggest a solution? I dunno what else info to supply, seems like a lot of different components could be involved, audio, video so will await for request which I will then gladly supply. Thanks in advance, Marc... marc@nova:/etc/logrotate.d> projectM-pulseaudio Default config: /usr/share/projectM/config.inp reading /home/marc/.projectM/config.inp [projectM] config file: /home/marc/.projectM/config.inp Failed to compile shader 'Vertex: v2f_c4f'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00ES, 3.00 ES, and 3.10 ES Failed to compile shader 'Fragment: v2f_c4f'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00 ES, 3.00 ES, and 3.10 ES Failed to link program: error: linking with uncompiled/unspecialized shadererror: linking with uncompiled/unspecialized shader Failed to compile shader 'Vertex: v2f_c4f_t2f'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00 ES, 3.00 ES, and 3.10 ES Failed to compile shader 'Fragment: v2f_c4f_t2f'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00 ES, 3.00 ES, and 3.10 ES Failed to link program: error: linking with uncompiled/unspecialized shadererror: linking with uncompiled/unspecialized shader Failed to compile shader 'Vertex: blur1'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00 ES, 3.00 ES, and 3.10 ES Failed to compile shader 'Fragment: blur1'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00ES, 3.00 ES, and 3.10 ES Failed to link program: error: linking with uncompiled/unspecialized shadererror: linking with uncompiled/unspecialized shader Failed to compile shader 'Vertex: blur2'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00 ES, 3.00 ES, and 3.10 ES Failed to compile shader 'Fragment: blur2'. Error: 0:1(10): error: GLSL 3.30 is not supported. Supported versions are: 1.10, 1.20, 1.30, 1.00ES, 3.00 ES, and 3.10 ES Failed to link program: error: linking with uncompiled/unspecialized shadererror: linking with uncompiled/unspecialized shader [PresetFactory] url is idle://Geiss & Sperl - Feedback (projectM idle HDR mix).milk device name is "alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor" reconnecting with "alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor" unconnected: connecting... connectHelper: "alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor" CREATED READY TERMINATED -- *_ _ . . . . . . _ _ . _ _ _ _ . . . . _ . . . . _ _ . _ _ _ . . . . _ _ . _ . . _ . _ _ _ _ . _ . _ . _ . _ . * Computers: the final frontier. These are the voyages of the user Marc. His mission: to explore strange new hardware. To seek out new software and new applications. To boldly go where no Marc has gone before! (/Attached is my public key to be used for encryption and sending encrypted email to marc(a)marcchamberlin.com./)

2 6

[opensuse] Re: chrony and ipv6
by J Leslie Turriff 04 Sep '20

04 Sep '20

On 2020-09-03 22:00:54 Carlos E. R. wrote: > Hi, > > Look at this output on a newly installed Leap 15.2 system: > > arlos@Rescate:~> grep chrony /var/log/messages > 2020-09-04T01:55:00.304034+02:00 install chronyd[1465]: chronyd version 3.2 > starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP -SCFILTER +SECHASH -SIGND > +ASYNCDNS +IPV6 -DEBUG) 2020-09-04T01:55:12.502311+02:00 install > chronyd[1465]: Selected source 185.132.136.116 > 2020-09-04T01:56:16.829596+02:00 install chronyd[1465]: Selected source > 178.255.228.77 2020-09-04T01:59:30.696451+02:00 install chronyd[1465]: > Selected source 185.132.136.116 2020-09-04T02:25:17.504984+02:00 install > chronyd[1465]: Source 2606:4700:f1::123 replaced with 2001:720:424:1::1:15 > 2020-09-04T02:55:08.658645+02:00 install chronyd[1465]: Source > 2606:4700:f1::1 replaced with 2001:720:1014:a202::2 > 2020-09-04T03:25:01.548423+02:00 install chronyd[1465]: Source > 2001:720:424:1::1:15 replaced with 178.32.88.247 > 2020-09-04T03:54:53.688796+02:00 install chronyd[1465]: Source > 2001:720:1014:a201::2 replaced with 2606:4700:f1::1 > 2020-09-04T04:24:45.734513+02:00 install chronyd[1465]: Source > 2001:720:1014:a202::2 replaced with 2001:720:424:1::1:15 carlos@Rescate:~> > > > Notice how chronyd is trying to use IPv6 addresses, when my home doesn't > have IPv6. The network is autoconfigured with DHCP (network manager) from > the ISP provided and configured router. > > carlos@Rescate:~> ifconfig > eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.1.134 netmask 255.255.255.0 broadcast 192.168.1.255 > inet6 fe80::b24b:5404:16c2:b3f6 prefixlen 64 scopeid 0x20<link> > ether f8:75:a4:e2:4b:48 txqueuelen 1000 (Ethernet) > RX packets 91343 bytes 111136210 (105.9 MiB) > RX errors 0 dropped 1 overruns 0 frame 0 > TX packets 32678 bytes 2686720 (2.5 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > What should I look at? The system is with default configurations, > installed hours ago. > > > -- > Cheers > > Carlos E. R. > (from 15.1 x86_64 at Telcontar) Looking at info, I see -4 and -6 options, but no description of which is the default; perhaps someone has changed it to -6? There is no relevant entry in the /etc/chrony.conf on my (15.1) machine; if there's none in yours, it must be using the internal default? Whups; that would be info for chronyd. Leslie -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] 2~2~2~Can clonezilla be "used" inside openSUSE?
by Carlos E. R. 03 Sep '20

03 Sep '20

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I know that it is used as a live cd or stick, but I wonder if could create an external hard disk with openSUSE and the clonezilla tools. The external would be the live system, the storage space for the images, and a familiar Linux system, with openSUSE, that would do more than just clone/restore a system. I suppose it is a script and some tools like partclone. Anybody tried? - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCX0USgRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVJsYAmQFcsTz4Ll3HHI8Y/Jlx eYdaoB17AKCZMG6+Lz1hM3ZzmoiePGLouSN5vA== =ctoz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] KVM on TW: does not allow the selection of an iso in the user space.
by Stakanov 03 Sep '20

03 Sep '20

When trying to set up a new virtual machine with a downloaded linux iso, the iso is "greyed out". What could be the reason? Permissions of the iso is world readable, but recently the KVM virtual manager, when telling him to use the iso, sees it, but grayed out. All directories are selectable and browsable, but allways the content is greyed out. Never had this, so no error message, no idea about what could be wrong. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] 15.2 zypper up NEW package virtualbox-guest-x11 - Why? I don't want it... I build guest modules
by David C. Rankin 03 Sep '20

03 Sep '20

All, For my 15.2 guests, I use Oracles virtualbox (currently testbuilds) I build my own modules for guest additions. I explicitly removed virtualbox-guest-x11 because I don't want the conflicting guest modules. DKMS rebuilds the modules just fine on kernel update with the vboxadd.service enabled. Now, for some reason, when I attempt zypper up I get: The following NEW package is going to be installed: virtualbox-guest-x11 I know I can just put a lock or exclusion of some type on it -- but why is it trying to install itself as a new package? I didn't ask it to? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 18

[opensuse] Thunderbird 78.2.1 available for testing in mozilla:beta
by Wolfgang Rosenauer 02 Sep '20

02 Sep '20

Am 30.08.20 um 19:23 schrieb Wolfgang Rosenauer: > Hi, > > Am 30.08.20 um 15:07 schrieb Mathias Homann: >> thunderbird 78.2.0 is out and has working gpg integration now, I think it's >> safe to upgrade the package in /mozilla... > > for the mozilla projet I think so as well. So when can we get it? oh, wait, I guess I just asked myself. This mail - in case it arrives for you - has been sent with Thunderbird 78.2.1 on openSUSE Leap 15.2 using the package in mozilla:beta. I'm not planning to upgrade Tumbleweed within the next few days but give people the chance to test this one and send feedback / open bugreports. Please also keep in mind that the OpenPGP integration in TB 78 does not use system GPG and also not the regular keyring but has its own keymanagement only right now. Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9