November 2020 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Bug in usb drivers? "Not enough bandwidth for new device state"
by Markus Egg 28 Feb '22

28 Feb '22

SuSE Tumbleweed with newest updates and upgrades. 5.7.1-1-default #1 SMP Wed Jun 10 11:53:46 UTC 2020 (6a549f6) x86_64 x86_64 x86_64 GNU/Linux Just recently started to give error messages when plugging in e.g. USB Headsets, Arduino Uno into some Exsys USB 3.0 hub. This was working fine in Tumbleweed before and in e.g. SuSE 13.1. The error message is e.g.: [...]usb 2-1.4.3: new full-speed USB device number 10 using xhci_hcd [...]usb 2-1.4.3: New USB device found, idVendor=2341, idProduct=0043, bcdDevice= 0.01 [...]usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [...]usb 2-1.4.3: Manufacturer: Arduino (www.arduino.cc) ...serialnumber... [...]kernel: usb 2-1.4.3: Not enough bandwidth for new device state. [...]kernel: usb 2-1.4.3: can't set config #1, error -28 This error message started on Jun 04, after making an update (zypper up) on June 3rd. A USB3.0 stick is working on the Exsys Hub. The Arduino is working on some other USB 3.0 Port of another hub. Regression? Any hints how to get this away? Found only another occurrence of this bug: http://opensuse92.rssing.com/chan-20813128/all_p1407.html Best regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171) So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] libc segfaults attaching an iPad
by Dave Howorth 26 Mar '21

26 Mar '21

I just tried to attach an iPad to my openSUSE 15.0 system, via USB. I think I've done it before, but this time it fails. Dmesg has: [9787970.148053] usb 3-9: new high-speed USB device number 96 using xhci_hcd [9787970.302089] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a2 [9787970.302091] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [9787970.302092] usb 3-9: Product: iPad [9787970.302093] usb 3-9: Manufacturer: Apple Inc. [9787970.302094] usb 3-9: SerialNumber: c4088xxxxxserialxredacted [9787971.044264] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [9787991.101146] pool[16789]: segfault at 0 ip 00007f6ada593ef1 sp 00007f6ad6203bd8 error 4 in libc-2.26.so[7f6ada43a000+1b1000] Anybody have any idea what the problem is? Thanks, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Raid, Raid6, what file system for good fault tolerance?
by cagsm 21 Dec '20

21 Dec '20

Hi list, speaking about software raid, not hardware controller based. I am trying to go for some local OpenSuse machine and adding some storage to it. Was considering Raid6, and now reading about a bit and people left and right scaremongering about the larger the disks these days in the double digit terabyte capacities even, the more likely it is that during a reconstruction of a raid subsequent errors would occur. I would absolutely like to keep my data consistent, and I am not thinking about double digit terabytes either, would stick to 2TB or 4TB disks, with Raid6 thats at least 4 physical drives. Now I am wondering if it possible to use a good robust file system that can add some more parity or check blocks or redundancy on top of the hardware disks, to absolutely be able to always read my data. I can't add multiple machines or like those high availability stuff like clusters and what not I read about DRBD (Distributed Replicated Block Device), or maybe I am just too scared by those technical terms or consider myself to be just a simpleton and wanting to keep it rather simple. My use case here is also not constant availablity, when a disk needs to be replaced, so be it, but I don't want to lose my data that I can not ever read certain parts of it again or such stuff. The thing that came to my mind was, if there is some file systems that would add redundancy and robustness onto the mdraid system of the linux kernel? Anyone with some useful insights? Roughly speaking, I was considering some simple pcie esata interfaced controller card and an external case enclosure with esata port and portmulitplier stuff inside, that can present at least 4 physical disks as JBOD, just a bunch of disks, so that the Linux can seem them all separately. Speed and rebuild times are not my concern, but data persistence and data integrity. Not even number of physical disks, I could live with even one of those 8 bay device enclosures and cases that are out there on the market. Thanks for any help and hints. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 23

[opensuse] Droidcam with iphone as a webcam, with google duo
by Richmond 10 Dec '20

10 Dec '20

I've been using droidcam with an iphone so it can be used with zoom, skype, duo as a camera. It was working until recently, but now with google duo it says something has gone wrong, cannot access camera microphone. Access is allowed in the settings though. This also applies to chromium. It still works with zoom, and skype. I suspected a kernel update, so I booted an old installation of 15.1, which was running kernel 5.4.10, installed the latest google chrome and that worked. I have tried updating my kernel to 5.9 but droidcam would not install. Currenly 5.3.18-lp152.50-default opensuse 15.2 What can I do? I have spend 3.5 hours!

4 6

[opensuse] Re: Ubiquiti Controller Software for Linux - DEB only?
by James Knott 06 Dec '20

06 Dec '20

On 2020-11-20 5:45 p.m., Herbert Graeber wrote: >>> You need a certificate and key and add them in /etc/sysconfig/unifi. >> Where would I find those? > You shall generate your own. > How do I do that? tnx jk

4 19

[opensuse] Clickable web links on the new HyperKitty web interface of the lists server?
by cagsm 06 Dec '20

06 Dec '20

Hi users @ list opensuse, maybe I am old school, but from old days of mails and usenet, I always came from the concept to post URLs, web-addresses and clickable links into like angle-brackets < > and make various mail clients and places be able to fully recognize and respect especially very long URLs URIs and more. Maybe I never fully grasped the concept, or had some misunderstanding of them to begin with. As far as I can now tell, the new HyperKitty (?) mechanism on https://lists.opensuse.org/archives/ apparently does not render clickable html links when browsing list posts e.g. on the new archives areas > https://lists.opensuse.org/archives/list/users@lists.opensuse.org/ vs > <https://lists.opensuse.org/archives/list/users@lists.opensuse.org/> Now I was wondering how one should post long links and more safely. I am writing via google gmail web interface. But also how about other inbound delivery means e.g. smtp clients etc? What are the exact technical details about how stuff becomes rendered on this HyperKitty thingy? Also, some while ago, I tried to attempt to log-in or register on the web interface of the lists.opensuse.org server, but it then denied or spoke about not having implemented accounts yet or something. These days, it seems that one could log in to it with all sorts of credential providers, opensuse id, open id, github, gitlab, stack exchange, google log on. <https://lists.opensuse.org/accounts/login/> Registering apparently is still blocked. <https://lists.opensuse.org/accounts/signup/> Does this mean we can somehow claim our own account that we already use (email address as sender) to be able to log into the web interface as well and post there instead of our own mail clients or mail concepts? or when will this be available? TY

11 19

[opensuse] REgistering file/mime type system wide
by Daniel Spannbauer 02 Dec '20

02 Dec '20

Hello, we have a filetype with ending "fsp" ,which should be opened with a special application. I created a xml-file and registered the type "application/x-fsp" with "xdg-mime install" I also created a Desktop-file /usr/share/applications/mmview.desktop , which has an entry "MimeType=application/x-fsp" When I call "xdg-mime query default application/x-fsp" as my user, I get "which: no mmviews in (/usr/uti)" If I call it as root, I get "mmview.desktop". How do I configure a mime type for alle users under opensuse Leap? Regards Daniel -- Daniel Spannbauer Systemadministration marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4-6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München

2 5