May 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Curious firewall message after reboot
by Carlos E. R. 08 May '19

08 May '19

After a reboot, I noticed this message: 2019-05-06T23:27:11.311154+02:00 Elesar kernel: [ 179.330904] STATE_INVALID_DROP: IN=eth0 OUT= MAC=00:21:85:16:2d:0b:f8:8e:85:64:78:f2:08:00 SRC=195.135.221.143 DST=192.168.1.134 LEN=40 TOS=0x00 PREC=0x20 TTL=52 ID=0 DF PROTO=TCP SPT=443 DPT=42062 WINDOW=0 RES=0x00 RST URGP=0 now: cer@Elesar:~> grep " 443/" /etc/services https 443/tcp # http protocol over TLS/SSL [Kipp_E_B_Hickman] https 443/udp # http protocol over TLS/SSL [Kipp_E_B_Hickman] https 443/sctp # HTTPS [Randall_Stewart] [RFC4960] cer@Elesar:~> cer@Elesar:~> host 195.135.221.143 143.221.135.195.in-addr.arpa domain name pointer susestudio.com. 143.221.135.195.in-addr.arpa domain name pointer static.opensuse.org. cer@Elesar:~> or: 2019-05-06T23:22:48.411867+02:00 Elesar kernel: [185515.234933] STATE_INVALID_DROP: IN=eth0 OUT= MAC=00:21:85:16:2d:0b:f8:8e:85:64:78:f2:08:00 SRC=212.227.17.188 DST=192.168.1.134 LEN=40 TOS=0x00 PREC=0x20 TTL=50 ID=28722 DF PROTO=TCP SPT=143 DPT=43140 WINDOW=0 RES=0x00 RST URGP=0 cer@Elesar:~> grep " 143/" /etc/services imap 143/tcp # Internet Message Access Protocol [Mark_Crispin_2] imap 143/udp # Internet Message Access Protocol [Mark_Crispin_2] cer@Elesar:~> host 212.227.17.188 188.17.227.212.in-addr.arpa domain name pointer imap.gmx.com. cer@Elesar:~> Why is that? Can they be pending connections from the previous session before the reboot? -- Cheers / Saludos, Carlos E. R. (from openSUSE, Leap 15.1 x86_64 (ssd-test)) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Re: [opensuse] Where to set the domain name? - Leap 15.1 beta
by Andrei Borzenkov 08 May '19

08 May '19

On Wed, May 8, 2019 at 2:39 PM Per Jessen <per(a)computer.org> wrote: > > Andrei Borzenkov wrote: > > On Wed, May 8, 2019 at 2:18 PM Per Jessen <per(a)computer.org> wrote: > >> The issue is the removal of the entry field for a domain name in the > >> YaST network configuration. We have yet to determine why > > > > https://lists.opensuse.org/opensuse/2019-05/msg00300.html > > > > Yep, thanks for finding that. > > Do you think there is any problem in removing it? > Value entered in "Domain Name" was used in three places. 1. It went into /etc/HOSTNAME (or later /etc/hostname), as $hostname.$domainname 2. It possibly went into /etc/hosts if "Assign to loopback" was checked 3. It was used as default value for domain search list if nothing was entered there explicitly (but apparently this became half broken at some point). Now ... 1. As I already said in this thread SUSE strips domain part from value of /etc/hostname so this was completely useless (and absurd, first you add domain, then ignore it). In some bug report it was mentioned that resolver may use domain name from this file if no domain/search was set in resolv.conf. But that is covered by 3 anyway ... 2. This may potentially have impact on programs that expect hostname (meaning value of "uname -n") to be resolvable via gethostbyname, getaddrinfo or similar. As far as I understand, default was to not add this entry for years already and apparently nobody so far complained so it I doubt anyone will notice. 3. Well, you still have Domain Search field and are free to edit it. You just enter the same information explicitly that was added by YaST implicitly. Nothing is lost here. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Wordpress ignores formatting/CSS instructions on opensuse 15.0?
by Hermann-Josef Beckers 07 May '19

07 May '19

I've installed WordPress (latest version 5.1.1 from wordpress.org) on openSUSE 42.3 (apache 2.4.33, PHP 5.5.14) and it works (see http://paste.opensuse.org/53731595) The same WP version installed on openSUSE 15.0 (apache 2.4.33, php 7.2.5) works (kind of), because it seems to ignore all formatting(css?) instructions (see http://paste.opensuse.org/91325777) Output of "a2enmod -l " on the working system 42.3: actions alias auth_basic authn_file authz_host authz_groupfile authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl userdir php5 reqtimeout version default-ssl mod-ssl wsgi authn_core authz_core mod_rewrite headers mod_env rewrite Output of "a2enmod -l " on the non working system 15.0: actions alias auth_basic authn_core authn_file authz_host authz_groupfile authz_core authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl socache_shmcb userdir reqtimeout php php7 version rewrite mod_rewrite Activating debug-mode gives no additional information. All necessary php modules should be installed, because e. g. Nextcloud runs on both servers without problems. Any hints? Hermann-Josef Beckers -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 9

[opensuse] mailx: how can I force the correct encoding of an attachment?
by Per Jessen 07 May '19

07 May '19

Sending an email as attachment, type message/rfc822: mailx -r <me@home> -a afile.eml reci@pient </dev/null With an older mailx (Heirloom mailx 12.2 01/07/07), this is correctly attached, encoded as 7bit. With a newer mailx (Heirloom mailx 12.5 7/5/10), it is encoded as base64, which cannot be read by most email agents. (Thunderbird can't read it, mailparse doesn't parse it). According to rfc2045, it isn't even permitted. Does anyone know how to make mailx encode that attacment as 7bit, as in the older mailx version? -- Per Jessen, Zürich (5.1°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 13

Re: [opensuse] How do I enable plain "times" font in Libre Office?
by Carlos E. R. 06 May '19

06 May '19

On 30/04/2019 23.58, David C. Rankin wrote: Letting you know that the return receipt to your private email was rejected by your provider: <drankinatty(a)suddenlinkmail.com>: host mx.suddenlinkmail.com[208.180.40.132] said: 421 dalifep03.suddenlink.net connection refused from [86.109.101.151] (in reply to end of DATA command) I replied to your post using gmx.es instead. You really should change provider. -- Cheers / Saludos, Carlos E. R. (from openSUSE, Leap 15.1 x86_64 (ssd-test)) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] firefox has suddenly disabled extensions
by Dave Howorth 06 May '19

06 May '19

Help! I'm running Leap 15.0 and Firefox 60.5.1esr (64-bit) from the standard repositories. I just returned to my PC and discovered one of my open Firefox tabs showing a banner at the top saying something about 'Some add-ons have been disabled'. When I clicked on 'Show legacy extensions' it listed what seem to be all my extensions, including Feedbro, NoScript, uBlockOrigin and others. Now I know FF has been changing the world for add-ons, but (1) I wouldn't expect to have been doing things normally, then gone to have my dinner and returned to find an error message popped up meantime (2) I'm not aware of any recent updates to FF (specifically, I haven't updated anything for a while - I run manual updates, not automatic) (3) I thought I'd already been through an exercise of updating or replacing my add-ons to meet new requirements (4) If this is something genuine, I would expect some notice to explain why this has happened at this particular time. Does anybody know what has occurred or can suggest the best means to investigate further? TIA, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 23

[opensuse] Recent changes broke Youtube
by James Knott 05 May '19

05 May '19

There are several Youtube videos that I have watched in the past, but for some reason no longer play. Did something change? The is the error message I get: "Your browser does not currently recognise any of the video formats avaialble. Click here to visit our frequently asked questions about HTML5 video." https://www.youtube.com/html5 Have there been any recent changes to Firefox or openSUSE 15.0 to cause this? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Jelly Comb touchpad not working
by Marc Chamberlin 05 May '19

05 May '19

Hi - I recently purchased a cute combo USB/Bluetooth keyboard/touchpad from Jelly Comb and when I plugged it in to my OpenSuSE Leap 15.0 system x64 with a KDE desktop, I only got partial joy from it. The keyboard works fine but the touchpad is unhappy and not responding to my caresses. The KDE desktop system settings utility for touchpads simply thumbs it's nose at it and says "No touchpad found" I tried installing the xf86-input-synaptics package but that didn't do squat. I did a bit of Googling around to see if I could learn what to do to make it happy but not coming up with much. Here is some info that I have about it. dmesg reports the following when the keyboard is plugged in - > [ 1175.023751] usb 3-5.1.5: new low-speed USB device number 8 using > xhci_hcd > [ 1175.151134] usb 3-5.1.5: New USB device found, idVendor=258a, > idProduct=6a88 > [ 1175.151138] usb 3-5.1.5: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 1175.151141] usb 3-5.1.5: Product: USB KEYBOARD > [ 1175.151143] usb 3-5.1.5: Manufacturer: SINO WEALTH > [ 1175.155208] input: SINO WEALTH USB KEYBOARD as > /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.0/0003:258A:6A88.0007/input/input18 > [ 1175.211986] hid-generic 0003:258A:6A88.0007: input,hidraw0: USB HID > v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-5.1.5/input0 > [ 1175.222147] input: SINO WEALTH USB KEYBOARD as > /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.1/0003:258A:6A88.0008/input/input19 > [ 1175.280026] hid-generic 0003:258A:6A88.0008: > input,hiddev96,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB KEYBOARD] > on usb-0000:00:14.0-5.1.5/input1 > [ 1176.029415] SFW2-INext-DROP-DEFLT IN=eth0 OUT= > MAC=98:90:96:e4:28:bd:00:31:46:49:36:a1:08:00 SRC=185.61.150.201 > DST=205.151.255.18 LEN=44 TOS=0x00 PREC=0x00 TTL=70 ID=32417 PROTO=TCP > SPT=60074 DPT=21 WINDOW=32120 RES=0x00 SYN URGP=0 OPT (02040200) The relevant portion from doing a cat /proc/bus/input/devices > > I: Bus=0003 Vendor=258a Product=6a88 Version=0110 > N: Name="SINO WEALTH USB KEYBOARD" > P: Phys=usb-0000:00:14.0-5.1.5/input0 > S: > Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.0/0003:258A:6A88.0007/input/input18 > U: Uniq= > H: Handlers=sysrq kbd leds event12 > B: PROP=0 > B: EV=120013 > B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe > B: MSC=10 > B: LED=7 > > I: Bus=0003 Vendor=258a Product=6a88 Version=0110 > N: Name="SINO WEALTH USB KEYBOARD" > P: Phys=usb-0000:00:14.0-5.1.5/input1 > S: > Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.1/0003:258A:6A88.0008/input/input19 > U: Uniq= > H: Handlers=kbd mouse0 event13 > B: PROP=0 > B: EV=17 > B: KEY=2a000000000 0 1f0000 1000302000000 3838d801d001 1e000000000000 0 > B: REL=143 > B: MSC=10 > and > xinput -list > ? Virtual core pointer id=2 [master > pointer (3)] > ? ? Virtual core XTEST pointer id=4 [slave > pointer (2)] > ? ? Microsoft Microsoft IntelliMouse® Explorer id=10 > [slave pointer (2)] > ? ? SINO WEALTH USB KEYBOARD id=9 [slave > pointer (2)] > ? Virtual core keyboard id=3 [master > keyboard (2)] > ? Virtual core XTEST keyboard id=5 [slave > keyboard (3)] > ? Power Button id=6 [slave > keyboard (3)] > ? Power Button id=7 [slave > keyboard (3)] > ? AT Translated Set 2 keyboard id=11 [slave > keyboard (3)] > ? SINO WEALTH USB KEYBOARD id=8 [slave > keyboard (3)] > ? SINO WEALTH USB KEYBOARD id=12 [slave > keyboard (3)] the Microsoft Microsot IntelliMouse Explorer is simply for another mouse I have in order to have a mouse available temporarily while I try and solve this problem. Anyone got an idea on how to make my new touchpad work? Thanks... Marc... -- Computers: the final frontier. These are the voyages of the user Marc. His mission: to explore strange new hardware. To seek out new software and new applications. To boldly go where no Marc has gone before! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 6

[opensuse] GIMP 2.10.4 Segmentation Fault on 15.0
by Andrei Verovski 05 May '19

05 May '19

Hi ! Anyone knows how to fix this segmentation fault running gimp 2.10.4 on Leap 15.0 ? It happens every time I'm trying to open any file, even very small. Thanks in advance. ------------------------- gimp-2.10.4-lp150.3.1.x86_64 (gimp:3426): GLib-ERROR **: gmem.c:100: failed to allocate 18446743908509634591 bytes (file-jpeg:3472): LibGimpBase-WARNING **: file-jpeg: gimp_wire_read(): error (ufraw-gimp:3468): LibGimpBase-WARNING **: ufraw-gimp: gimp_wire_read(): error (script-fu:3455): LibGimpBase-WARNING **: script-fu: gimp_wire_read(): error Trace/breakpoint trap (core dumped) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] Last Webkit Updates Broke UBlock Origins and NoScript! Warning Please?
by David C. Rankin 05 May '19

05 May '19

All, The last webkit (or other) updates pushed last night completely disables all existing extensions in Firefox 60.6.1esr. U-Block Origins is now disabled NoScript is now disabled Copy to Plain Text is now disabled What gives? What exact rpm was the culprit. Don't you think if you are going to push an update that will break all extensions in Firefox -- there should be reasonable notice? When and how is this going to be fixed? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 12