July 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] how to get dbus-launch working?
by L A Walsh 13 Jul '18

13 Jul '18

When I login now, I see messages like: Unable to register terminal service: /usr/bin/dbus-launch terminated abnormally with the following error: Autolaunch requested, but X11 support not compiled in. Cannot continue. So I make sure /tumbleweed/dbus-1-x11-1.12.6-1.1.x86_64.rpm: Preparing... ################################# [100%] Updating / installing... 1:dbus-1-x11-1.12.6-1.1 ################################# [ 50%] update-alternatives: using /usr/bin/dbus-launch.x11 to provide /usr/bin/dbus-launch (dbus-launch) in auto mode But now I get: Unable to register terminal service: /usr/bin/dbus-launch terminated abnormally with the following error: EOF in dbus-launch reading address from bus daemon ??? I thought it was supposed to launch dbus for me? -- that being what dbus-launch was for? I am guessing dbus-launch doesn't really mean dbus-launch? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Osm2mp on opensuse
by stakanov 12 Jul '18

12 Jul '18

Hi everybody. I am trying to install osm2mp a converter program for openstreetmap (vs garmin) on opensuse Leap 15. The page of osm gives following advice (that does not tell me a lot about what they do there) and I would like to know if somebody tried it, has any experience with it, knows whether the indicated way is viable for leap: Indications are: OpenSUSE Open terminal app and enter following commands: su zypper in perl-YAML perl -MCPAN -e "install List::MoreUtils" perl -MCPAN -e "install Text::Unidecode" perl -MCPAN -e "install Data::Dump" perl -MCPAN -e "install Math::Polygon" perl -MCPAN -e "install Inline::MakeMaker" perl -MCPAN -e "install Math::Geometry::Planar::GPC::Polygon" perl -MCPAN -e "install Math::Polygon::Tree" perl -MCPAN -e "install Tree::R" Does this still work in leap 15? (seems to be just a collection of perl scripts? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 16

[opensuse] CUPS LDP printing and queue, confused
by Istvan Gabor 12 Jul '18

12 Jul '18

Hello: I would like to configure two network printers in yast as LPD/LPR printers. One is a HP Laserjet, the other is an Epson all-in-one. The add LPD printer dialogue in the printer connections wizard insist that I enter a print queue name which I don't know. (Yast dialog says: "Queue Name (see the printer's manual) ) I also tried to add the printers in CUPS web configuration tool and it also expects that the queue added, like: Add Printer Connection: lpd Examples: lpd://hostname/queue or in the CUPS help pages (http://localhost:631/help/network.html) lpd://ip-address-or-hostname/queue What is the value of this queue? Where can I find it? If I understand correctly this is not the same as the "printer queue name" or printer name I specify when I set up the printer queue. I searched both printer's manuals for queue but could not find mentioning of queue in ip address. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Sad news: John Andersen died.
by Knurpht＠openSUSE 11 Jul '18

11 Jul '18

Dear list users, In a reply in this list, the sad news came in that John Andersen died. ---------- Doorgestuurd bericht ---------- Onderwerp: Re: [opensuse] Re: [libreoffice-users] My Templates? Datum: zondag 8 juli 2018, 21:59:42 CEST Van: John Andersen <jsamyth(a)gmail.com> Aan: opensuse(a)opensuse.org John died on Friday morning. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org ------------------------------------------------------- -- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 12

[opensuse] Thunderbird 52.9.0 crashing too often.
by Carlos E. R. 09 Jul '18

09 Jul '18

Hi, I updated to Thunderbird 52.9.0 yesterday night, and I just had two crashes in half an hour. Report automatically uploaded somewhere. Problem is in libxul. Report ID Submitted bp-ac087cc1-80ad-40f9-a3ed-2d5520180708 2018-07-08 bp-532936bc-5d01-44a3-898c-f52c30180708 2018-07-08 Another issue that I have, since about a month, is that Thunderbird suddenly goes 100% CPU load and does not respond to mouse clicks or keyboard, till it finishes a few seconds later. Happens frequently, but perhaps less with the current version. -- Cheers / Saludos, Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar)

4 5

[opensuse] rounding a number
by Carlos E. R. 09 Jul '18

09 Jul '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Do we have something that would round a number in a script? I have: case "$1" in 72.009|72) DPI=72 ;; 86.0044|86) DPI=86 ;; 96.01) DPI=96 ;; 240.005|240) DPI=240 ;; 149.99) DPI=150 ;; 265.99|266) DPI=266 ;; 299.999|300) DPI=300 ;; 265.989|266) DPI=266 ;; 359.99|359.994|360) DPI=360 ;; 359.99000000000000909) DPI=360 ;; This is absurd. Now I have another value, 265.99000000000000909 and I have to add another exception. I think I can write up my own tool, but perhaps it already exists :-? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAltAty0ACgkQtTMYHG2NR9VC4gCfV2AUpa7/vHNYhyuv+2IA519i iysAn2TvNKRVw6fYmJGSY13iO191cla+ =r3Vp -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 32

Re: [opensuse] rounding a number
by Carlos E. R. 09 Jul '18

09 Jul '18

On 2018-07-08 23:36, tooth pik wrote: > hasn't bc always been a part of bash? you can sent your own precision > with that Not that I know, it is not listed in "man bashbuiltins" Welcome here, by the way :-) There is a problem with your email, though. You are using gmail, so the first thing you must know is that you will never receive a copy of your own email via the list server, because gmail thinks it is a duplicate and erases it (it has the local copy of the "sent" folder). Also, if people mail both to the list and to you directly, you will only receive the direct copy, as the one from the list arrives later to gmail, and google thinks it is a duplicate of the first one and erases the second. If you want to check if an email of yours arrived, you have to browse to the archive: <https://lists.opensuse.org/opensuse/2018-07/all.html> you can see your post is not there, so we come to the second issue, the important one. Your post was rejected by the list server because it contains html. In order to post on openSUSE mail lists (and many others) you have to tell gmail to use plain text only. In fact, you probably have received a post from the mail list saying that the post was rejected. I got your private copy sent to me, so I took the chance to tell you. More details here: <https://en.opensuse.org/openSUSE:Mailing_list_netiquette> have fun :-) -- Cheers / Saludos, Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar)

3 3

[opensuse] Help with system architecture documentation, please
by don fisher 09 Jul '18

09 Jul '18

I have been searching trying to discover why so many of my 42.3 applications fail in leap 15. As a test I rebooted my system so things would be fresh, and then executed: pstree -p -n With Thunderbird, Firefox, Rhythmbox, fvwm2, a terminal an a few others, there were 438 different processes spawned. Just Firefox was responsible for 238 processes. Rhythmbox, one of my problem apps, had 10 processes. I would like to find documentation describing how one would write an application and all of the synchronization requirements linked by gdbus and the other protocols. I am currently rereading the systemd documentation which gives some of the desired information at startup. What I would like is a document that ended with a cookbook giving a full example of an application. For example a simple window with a push button in it. I am sure people do write code for opensuse, or else we wouldn't need such a software development environment. The only documentation I can find relates to setting up the environment and system management. Thanks, and it doesn't have to be free. I will buy a book if available. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 14

[opensuse] Re: [libreoffice-users] My Templates?
by James Knott 08 Jul '18

08 Jul '18

On 07/08/2018 03:14 PM, Steve Edmonds wrote: > My templates are separated in My Templates. I can find only one of the templates I had created. Where did the others go? Why all this nonsense of making custom templates so hard to find??? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] System complains during start up: error - no symbol table - press any key to proceed
by stakanov 08 Jul '18

08 Jul '18

I have a Lenovo X201 with tpm. I have the system installed as follows: One hdd with a /dev/sda1 partition (unencrypted) and an LVM (with the /dev/ home, /dev/system, /dev/root, /dev/swap) as proposed by the partitioner at the time of fresh install of Leap 15. I tried however an update first with a 42.3 system and a /boot partition and the error I am describing here was the same in Leap 15. When starting up the system reaches correctly trusted grub2. You are asked to input the password. After having done the input, the system works for some time and then states: slot 0 opened (so this part works) Error: no symbol table and then you are brought - without any interaction required - to grub (were you have a second issue, of being asked always the password (no matter what). Since the fix for this will be in the future (bug filed for the previous version), this is not the issue. The password issue was present also in 42.3 (were no complain was there). So it is unrelated. You input the user (root) and the password of choice. Then the system starts up and stops right after loading the kernel with: error - no symbol table found - press any key to proceed. Then you press whatever key, e.g enter and all works fine up to full boot up. No other disturbances seem to be there. This happens only after the upgrade to Leap 15 / new install of Leap 15. Therefore it seems a grub2 issue? Can anybody give me some insight of the matter? Should I raise a bug? Thanks in advance. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] logrotate is not running
by Carlos E. R. 07 Jul '18

07 Jul '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 minas-tirith:~ # grep -i logrotate /var/log/messages <1.6> 2017-11-03 18:45:24 minas-tirith run-crons 29173 - - logrotate: OK <1.6> 2017-11-09 23:15:10 minas-tirith run-crons 26985 - - logrotate: OK <1.6> 2017-11-15 02:15:12 minas-tirith run-crons 30572 - - logrotate: OK <1.6> 2017-11-20 22:45:11 minas-tirith run-crons 6757 - - logrotate: OK <1.6> 2017-12-05 21:15:12 minas-tirith run-crons 30613 - - logrotate: OK <1.6> 2017-12-11 09:15:11 minas-tirith run-crons 2495 - - logrotate: OK <1.6> 2017-12-18 01:45:13 minas-tirith run-crons 5130 - - logrotate: OK <1.6> 2018-01-02 10:45:17 minas-tirith run-crons 10574 - - logrotate: OK <1.6> 2018-01-15 18:30:16 minas-tirith run-crons 19341 - - logrotate: OK <1.6> 2018-01-20 22:15:14 minas-tirith run-crons 17631 - - logrotate: OK <1.6> 2018-01-26 12:15:12 minas-tirith run-crons 3707 - - logrotate: OK minas-tirith:~ # As you can see, it did not run since January, when I updated the machine to Leap 42.3 It is supposed to be a systemd timer now, and it was disabled. I enabled it yesterday and waited a day. But it is not running, on two computers - notice the size of the messages log file: minas-tirith:~ # l -h /var/log/messages - -rw-r----- 1 root root 20M Jul 7 01:45 /var/log/messages minas-tirith:~ # Isengard:~ # grep -i logrotate /var/log/messages Isengard:~ # ls -lh /var/log/messages - -rw-r----- 1 root root 99M Jul 7 01:45 /var/log/messages Isengard:~ # It should rotate at 4 MB: /etc/logrotate.d/syslog: /var/log/warn /var/log/messages /var/log/localmessages /var/log/firewall /var/log/acpid /var/log/NetworkManager /var/log/mail /var/log/mail.info /var/log/mail.warn /var/log/mail.err { compress dateext maxage 365 rotate 99 missingok notifempty size +4096k create 640 root root sharedscripts postrotate /usr/bin/systemctl reload syslog.service > /dev/null endscript } The timer is enabled on one, but after a day it did not run: minas-tirith:~ # systemctl status logrotate.timer ● logrotate.timer - Daily rotation of log files Loaded: loaded (/usr/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:logrotate(8) man:logrotate.conf(5) minas-tirith:~ # systemctl status logrotate.service ● logrotate.service - Rotate log files Loaded: loaded (/usr/lib/systemd/system/logrotate.service; static; vendor preset: disabled) Active: inactive (dead) Docs: man:logrotate(8) man:logrotate.conf(5) minas-tirith:~ # Isengard:~ # systemctl status logrotate.timer ● logrotate.timer - Daily rotation of log files Loaded: loaded (/usr/lib/systemd/system/logrotate.timer; disabled; vendor preset: enabled) Active: inactive (dead) Docs: man:logrotate(8) man:logrotate.conf(5) Isengard:~ # systemctl status logrotate.service ● logrotate.service - Rotate log files Loaded: loaded (/usr/lib/systemd/system/logrotate.service; static; vendor preset: disabled) Active: inactive (dead) Docs: man:logrotate(8) man:logrotate.conf(5) Isengard:~ # On this machine I did no change till now: Isengard:~ # systemctl enable logrotate.timer Created symlink from /etc/systemd/system/timers.target.wants/logrotate.timer to /usr/lib/systemd/system/logrotate.timer. Isengard:~ # What is missing? Should I also enable the service? start the timer and/or the service? I just told the timer to start, I'll hope it is that but I do not know. How much do I have to wait till the logs are rotated, till 00 hours tomorrow? I noticed the problem because yesterday this machine root partition was full with one log that had grown to 8 GB and not rotated :-( - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAltAAlgACgkQja8UbcUWM1yrewEAnH913rAjgb/dFcrE/6gBqnIr Q68J7PZ+gwvMHTEQhUgA/3Cw3T0+jEgHKqPB3bNI3azZOlnOROW+Zd8Q7dd09RE1 =1IyJ -----END PGP SIGNATURE-----

6 16

[opensuse] Suse sold to EQT
by Larry Stotler 07 Jul '18

07 Jul '18

Saw on Slashdot that Microfocus has sold SUSE to EQT. Anyone else got any info and how this affects opensuse? Thanx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

16 24

[opensuse] Wolfgang - you building Tbirrd 52.9.0 for Update
by David C. Rankin 06 Jul '18

06 Jul '18

All, Wolfgang, Thunderbird 52.9.0 was released on the 3rd, and has fixes for GPG included. Is it in the work for the update repo, or is this a build your own type thing? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] why do I have both kde4init and kde5init running?
by Anton Aylward 06 Jul '18

06 Jul '18

I see > ps -ef | grep init anton 505 1 0 14:35 ? 00:00:00 kdeinit4: kdeinit4 Runnin e anton 506 505 0 14:35 ? 00:00:00 kdeinit4: klauncher [kdei e anton 508 1 0 14:35 ? 00:00:00 kdeinit4: kded4 [kdeinit] anton 2368 31300 0 18:37 pts/1 00:00:00 grep --color=auto init anton 31121 1 0 12:37 ? 00:00:00 /usr/bin/dbus-launch --sh-syntax --exit-with-session /home/anton/.xinitrc anton 31168 1 0 12:37 ? 00:00:00 /usr/lib64/libexec/kf5/start_kdeinit --kded +kcminit_startup anton 31169 1 0 12:37 ? 00:00:00 kdeinit5: Running... anton 31173 31169 0 12:37 ? 00:00:01 kded5 [kdeinit5] anton 32194 31169 0 12:37 ? 00:00:01 file.so [kdeinit5] file local:/run/user/501/klauncherJ31170.1.slave-socket local:/run/user/501/dolphinn31296.4.slave-socket > tail ~/.xinitrc # pland & # # finally start the window manager # unset WINDOW_MANAGER STARTUP exec $WINDOWMANAGER ${1+"$@"} # call failsafe exit 0 > env | grep WIN WINDOWID=69206021 WINDOWMANAGER=/usr/bin/startkde WINDOWPATH=7 > rpm -qf /usr/bin/startkde plasma5-workspace-5.8.7-11.1.x86_64 THAT is _supposed_ to check for an already running KDE session. There is a function 'kcheckrunning' at /usr/bin/ So why do I get both 4 & 5? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] MSI GE63 7RD : No openSUSE Leap 15?
by Markus Egg 06 Jul '18

06 Jul '18

Finally after a long search my selection for new laptop is the MSI GE63 7RD. Several internet tests were quite positive and -most important- it is very silent. Also the Ubuntu community said that these MSI laptops are quite "standard" stuff, only few tweaks, Optimus seems to be one thing to tweak. But: after having bought this machine I have to realize that openSUSE Leap 15 does not seem to be ready for this laptop (although amazon.de lists this machine since July 3rd 2017). There is a bunch of error messages when booting it up from USB after setting Secure boot to off and fast boot also. The worst one seems to be "NMI watchdog : BUG soft lockup CPU4 stuck for 22s!" afterwards SuSE15 seems to be stuck and I have to turn off by switch. I also tried tumbleweed on a USB stick - same error. Actually I was able to install Ubuntu 18.04 LTS with a tweak of bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi under Windows 10 because otherwise the grub boot manager is not shown. Everything else seems to work after doing that tweak with nVidia which is described in internet all over. Does this mean I have to say goodbye to SuSE on my Laptop? After approx 28 years using SuSE? :-/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 30

[opensuse] Mozilla shows Stylish the door. (with a boot)
by David C. Rankin 05 Jul '18

05 Jul '18

All, If you use the Stylish add-on for Firefox, see: https://bugzilla.mozilla.org/show_bug.cgi?id=1472948 It has been removed as an add-on due to collecting user information in violation of the mozilla policy (this was evidently the result of Stylish being sold to RobetHeaton.com, "The 'Stylish' extension was recently sold and the new company now logs all browser history. https://robertheaton.com/2018/07/02/stylish-browser-extension-steals-your-i… " It was quite a surprise to get a Firefox pop-up to disable an extension. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] fcitx and wayland do not seem to work together
by stakanov 05 Jul '18

05 Jul '18

is this true? It seems to be a very old story and therefore I thought it would be fixed by now. If not, I can simply not use it. Does anybody has some update on the issue? Thanks. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Leap 15.0 live images are installable?
by Linux Kamarada 05 Jul '18

05 Jul '18

Hi, everyone! I see Leap 15.0 live images have an Installation icon, but how does that installation work? Live image content is extracted to the HD / SSD? (similar to a dd or unzip operation) Or it downloads packages from the repos, just like netinstall does? Thank you! Antonio The Linux Kamarada Project http://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

Re: [opensuse] openSUSE LibreOffice Impress Template
by Linux Kamarada 04 Jul '18

04 Jul '18

Thank you! It was exactly what I was looking for! :D Antonio The Linux Kamarada Project http://kamarada.github.io/ 2018-07-02 23:08 GMT-03:00 Kukuh Syafaat <syafaatkukuh(a)gmail.com>: > > On Tue, Jul 3, 2018 at 9:03 AM Linux Kamarada <linuxkamarada(a)gmail.com> > wrote: >> >> Is there an official template for openSUSE presentations? If so, where >> can I download it? > > https://github.com/openSUSE/artwork/blob/master/Marketing%20Materials/openS… -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] openSUSE.Asia Summit 2018 Logo Competition
by medwinz 04 Jul '18

04 Jul '18

Hi openSUSE people, openSUSE.Asia Summit committee is looking for the 2018 summit logo [1]. We already received 10 cool design from community and would be very appreciate if everyone could involve in selecting the logo. The voting period will be from July 3 - July 10, 2018. Please vote your favorite logo through https://vote.opensuse-asia.org Use your openSUSE account to login. Thanks for your vote! [1] https://events.opensuse.org/conference/summitasia18 Have fun, -- Edwin -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] openSUSE LibreOffice Impress Template
by Linux Kamarada 03 Jul '18

03 Jul '18

Hi, everyone! Is there an official template for openSUSE presentations? If so, where can I download it? I like the one used here: https://www.slideshare.net/cho2marsmellow/flatpak-and-appimage-usage-on-ope… The last slide says: "Credits Template Richard Brown" Thank you! Antonio The Linux Kamarada Project http://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] glXChooseVisual can't select XVisualInfo struct on both 42.3 & 15?
by David C. Rankin 03 Jul '18

03 Jul '18

All, Stray issue with initializing an openGL application. For some reason in both 42.3 and 15 glXChooseVisual will return NULL regardless of attributes used. (even the defaults). If anyone has the glut and the openGL devel packages installed, I would like to see if anyone can confirm this behavior. A simple init snippet in C that will do it is: #include <GL/glx.h> #include <GL/gl.h> #include <GL/glu.h> #include <X11/Xlib.h> #include <X11/Xutil.h> #include <stdio.h> #include <stdlib.h> int main (void) { Display *dpy; static int attributes[] = {GLX_DEPTH_SIZE, 16, GLX_DOUBLEBUFFER, None}; XVisualInfo *vi; int errbase, eventbase; dpy = XOpenDisplay(NULL); if (dpy == NULL) { fprintf (stderr, "XOpenDisplay: could not open display\n"); exit (EXIT_FAILURE); } if (!glXQueryExtension (dpy, &errbase, &eventbase)){ fprintf (stderr, "glXQueryExtension: no glx extension"); exit (EXIT_FAILURE); } /* glXChooseVisual returns NULL on 42.3 & 15 regardless of * attributes specified. */ vi = glXChooseVisual (dpy, DefaultScreen(dpy), attributes); if (vi == NULL) { fprintf (stderr, "glXChooseVisual: could not get visual\n"); exit (EXIT_FAILURE); } return 0; } Compile with: gcc -Wall -Wextra -pedantic -Wshadow -std=gnu11 -Ofast -lGL -lGLU -lX11 -o glXChooseVisual_test glXChooseVisual_test.c -lglut Bug opened: https://bugzilla.opensuse.org/show_bug.cgi?id=1099913 -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Boot problem after latest TW dup
by Ken Schneider - openSUSE 02 Jul '18

02 Jul '18

Old HP computer so possible hardware issues. I had issues during the dup to 20180628 and need to use the rescue system to repair grub. I cannot find an email I had with steps including 'bind -o' in them so if some kind soul could sent the procedure I would appreciate it. I've already repaired the filesystem but need to repair grub as well. Many thanks. -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] weird error on opensuse site following an advert: new encryption only on suse?
by L A Walsh 02 Jul '18

02 Jul '18

I followed an opensuse advert for selling data storage for body-cams to police. It went through some redirects on google, then went to www.suse.com, where I prompt got some weird error I can't reproduce because google is serving up a different advert, and I don't know the URL because google encrypts the SSL stream (recently upgraded my squid and have yet to pop in a new local cert to decode it). This is a perfect reason why I hate needless encrypting of webpages -- as now I can't even find the URL I was on let alone reproduce the problem from it. However, I get a different but similar error if I try to goto the website directly. The connection was interrupted The connection to www.suse.com was interrupted while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Pale Moon is permitted to access the Web. ----- Before, when I got the error, in my proxy log I got: +5.86 0ms; 0 (0/-) NONE/000 <Athenae [NONE error:transaction-end-before-headers - - -] +0.00 0ms; 0 (-/-) NONE/000 <Athenae [NONE error:transaction-end-before-headers - - -] +11.37 2038ms; 39 (3.0/19.0) TUNNEL/200 <Athenae [CONNECT www.suse.com:443 - 130.57.66.10 -] +34.72 2044ms; 39 (1.0/19.0) TUNNEL/200 <Athenae [CONNECT www.suse.com:443 - 130.57.66.10 -] --- After most of the suse connects, I see the weird message in my squidlog that I've never seen before "error:transaction-end-before-headers"... I get the same message going to the opensuse network forums webpage. I have a feeling it has to do with the new encryption as I'm using an older browser by default So far, opensuse is the first site that I've hit this on. I know it isn't the proxy, as it opens in another (newer browser (opera)). So the claim is that open suse is doing this because google is forcing it. Then why am I not having the same problem with other web pages -- including google? This new encryption (if that's what it is and if it was done right) seems to be only present on opensuse systems at this point (maybe more will pop up later). But the part I find to be the most strange is that the sites that the ad was on, had no problem, I have no problems any google site (youtube, plus, etc). Just suse.com and opensuse.org. I don't have the problem on download.opensuse.org (which defaults to http for me), nor the https version used on that site. So why is opensuse causing problems for some browsers, but no one else seems to be (including download site)? Ideas? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

17 56

[opensuse] Adobe Reader no longer works - 15.0
by James Knott 01 Jul '18

01 Jul '18

Since installing Leap 15.0, I now see Adobe Reader no longer works. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

23 94