September 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] How to set up razor-agent in Leap?
by stakanov 05 Sep '17

05 Sep '17

I find plenty of advises how to configure razor-agent in /etc/spamassassin... like: sudo razor-admin -home=/etc/spamassassin/.razor -register sudo razor-admin -home=/etc/spamassassin/.razor -create sudo razor-admin -home=/etc/spamassassin/.razor -discover But this is not the configuration case in opensuse if you just run spamassasin on a userbase AFAIU. Can I use razor-agent in these conditions and were(??) to set it up. How to set it up? Just change the path from /etc/spamassassin to a pass in the respective userhome? And which spamassasin rule has to be set in kmail? And: can two users contemporaneously run it? Thank you. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] mysql-5.7.19-linux-glibc2.12-x86
by jp list 04 Sep '17

04 Sep '17

Hi There, I need to use MySQL community version 5.7.8 (or greater) because support Json as a type. I didn't find any package compiled for opensuse leap 42.3 So I am trying to running from the tar from MySQL web page but service it is failing when I try it to start it: xps:/usr/local/mysql-5.7.19-linux-glibc2.12-x86_64 # support-files/mysql.server start redirecting to systemctl start .service Starting MySQL.Logging to '/usr/local/mysql/data/xps.err'. The server quit without updating PID file (/usr/local/mysql/data/xps.pid). failed any clue ? I renamed config file of my mariadb intallation ... but looks like it's not related ... thank you in advance ! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Re: WD Green AV HD: rsync read errors mapping
by Carlos E. R. 04 Sep '17

04 Sep '17

On 2017-09-03 23:35, L A Walsh wrote: > Anton Aylward wrote: >> ${DEITY} help us when we have to check out the half dozen or so 4T >> drives for a RAID array! >> > ---- > I caught my RAID controller doing similar -- a patrol-read where it was > doing all of them in the container in parallel. > > > > Carlos E. R. wrote: >> I also have the theory of not throwing away my disks the first time they >> have bad sectors. Allow remapping, then keep them under observation. If >> there are no more bad sectors (after long test, perhaps full dd >> writeover), I feel safe. If bad sectors keep appearing, then replace >> fast. >> > ---- > I've had the opposite practice -- the first time a drive starts remapping -- > replace it ASAP. Even if it is starting to fail, it will start to be slower > as more and more sectors are remapped and need to be have extra seeks. > > You can't rely on files being contiguous anymore (even when the the Os > reports them as contiguous) because the disk will still report them as > contig to the OS. > > Finally -- once a disk starts remapping, I'm almost certain that a > HW RAID controller will kick it out of an array because that disk won't > keep up with the other disks. Well, if the number of bad sectors keep growing, I also kick the disk out. I have disks in use that once developed a few bad sectors, but not any more. I kept using them for several years and there were no more incidents, till I retired them "because old age", or simply because they are too small. However, I don't use raid, the situation may be different there, because of the timing issues you mention. But notice that if the disk continues to grow bad sectors, I do not use it. -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)

1 0

[opensuse] google-chrome changed gpg signing key?
by ellanios82 03 Sep '17

03 Sep '17

am seeing : File 'repomd.xml' from repository 'google-chrome' is signed with an unknown key '1397BC53640DB551' regards .... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] 42.3 - Konqueror doesn't open to home directory
by James Knott 01 Sep '17

01 Sep '17

Since updating to 42.3, I find Konqueror no longer opens to my home directory. I was finally able to get it to the point where it opens to a blank screen, but I still have to click on the home button, to show my home directory? Is there any way to fix this, so that it works properly? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 34

[opensuse] root login to kde 4
by Istvan Gabor 01 Sep '17

01 Sep '17

Hello: I have openSUSE Leap 42.2 and kdm4 display manager. I would like to login to kde 4 session as root. (I have to unmount /home partition for maintaining, therefore I can't login as normal user and use su, kdesu etc, still I want to work in GUI.) If I try to login as root the login process starts but in a few moments it stops and it gives back the login window. I have set DISPLAYMANAGER_ROOT_LOGIN_LOCAL to yes in /etc/sysconfig/displaymanager file, DISPLAYMANAGER_SHUTDOWN is set to all, and PERMISSION_SECURITY is set to easy local in /etc/sysconfig/security file. I checked /usr/share/kde4/config/kdm/kdmrc file too. I did not have line AllowRootLogin, therefore I added AllowRootLogin=true line to [X-*-Core] session. This did not help, still cannot login as root. /var/log/messages shows: 2017-08-31T12:53:12.618924+02:00 linux kdm: :1[7197]: pam_unix(xdm:session): session opened for user root by (uid=0) 2017-08-31T12:53:12.626813+02:00 linux systemd[1]: Created slice User Slice of root. 2017-08-31T12:53:12.654821+02:00 linux systemd[1]: Starting User Manager for UID 0... 2017-08-31T12:53:12.667489+02:00 linux systemd-logind[1192]: New session 97 of user root. 2017-08-31T12:53:12.667732+02:00 linux systemd: pam_unix(systemd-user:session): session opened for user root by (uid=0) 2017-08-31T12:53:12.667920+02:00 linux systemd[1]: Started Session 97 of user root. 2017-08-31T12:53:12.739948+02:00 linux systemd[7220]: Reached target Sockets. 2017-08-31T12:53:12.740423+02:00 linux systemd[7220]: Reached target Paths. 2017-08-31T12:53:12.740718+02:00 linux systemd[7220]: Reached target Timers. 2017-08-31T12:53:12.741003+02:00 linux systemd[7220]: Reached target Basic System. 2017-08-31T12:53:12.741281+02:00 linux systemd[7220]: Reached target Default. 2017-08-31T12:53:12.741555+02:00 linux systemd[7220]: Startup finished in 74ms. 2017-08-31T12:53:12.741843+02:00 linux systemd[1]: Started User Manager for UID 0. 2017-08-31T12:53:12.877188+02:00 linux checkproc: checkproc: can not get session id for process 6964! 2017-08-31T12:53:12.916858+02:00 linux kdm: :1[7197]: pam_unix(xdm:session): session closed for user root 2017-08-31T12:53:15.923156+02:00 linux systemd-logind[1192]: Removed session 97. 2017-08-31T12:53:15.926077+02:00 linux systemd[1]: Stopping User Manager for UID 0... 2017-08-31T12:53:15.927075+02:00 linux systemd[7220]: Stopped target Default. 2017-08-31T12:53:15.927325+02:00 linux systemd[7220]: Stopped target Basic System. 2017-08-31T12:53:15.927524+02:00 linux systemd[7220]: Stopped target Timers. 2017-08-31T12:53:15.927674+02:00 linux systemd[7220]: Reached target Shutdown. 2017-08-31T12:53:15.927831+02:00 linux systemd[7220]: Stopped target Paths. 2017-08-31T12:53:15.928111+02:00 linux systemd[7220]: Stopped target Sockets. 2017-08-31T12:53:15.942576+02:00 linux systemd[7220]: Starting Exit the Session... 2017-08-31T12:53:15.949867+02:00 linux systemd[7220]: Received SIGRTMIN+24 from PID 7307 (kill). 2017-08-31T12:53:15.953240+02:00 linux systemd: pam_unix(systemd-user:session): session closed for user root 2017-08-31T12:53:15.956168+02:00 linux systemd[1]: Stopped User Manager for UID 0. 2017-08-31T12:53:15.961748+02:00 linux systemd[1]: Removed slice User Slice of root. How could I trace and fix this? Any help is appreciated. Thanks, Istvan ps: Please don not write that I should not log in to GUI as root, because it does not help to solve the problem. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 15

[opensuse] Leap 42.3 wants nvidia
by Roger Oberholtzer 01 Sep '17

01 Sep '17

I was just going to do a 'zypper dup' on a Leap 42.3 system, and zypper now reports this: The following 4 NEW packages are going to be installed: nvidia-computeG04 nvidia-gfxG04-kmp-default nvidia-glG04 x11-video-nvidiaG04 I do not have any nvidia stuff installed. Also, the nvidia RPMS are for an older Leap kernel. I guess some other package is pulling this in. But no other packages look like they should do this. Except perhaps VirtualBox, which is getting updated. Strange. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Tar file Error - Urgent data recovery
by Paul Groves 01 Sep '17

01 Sep '17

I am having problems with extracting a tar file for a colleague. It was created with tar / gzip on opensuse 42.1 and a md5 checksum generated and stored on a NAS. The 42.1 box had a disk failure (which is why I keep advising everyone to use raid but they still do not listen until it goes wrong). So 42.3 has been installed on the new disk(s) which are now in raid (which would have avoided this problem had I been listened to in the first place). So first thing, I verified the md5 sum against the tar file which came back succesful. so I am using tar -xvzf /mnt/BACKUP/file.tar.gz to extract the file. But I keep getting the following error before extraction completes: gzip: stdin: Input/output error tar: Unexpected EOF in archive tar: Error is not recoverable: exiting now The odd thing is it isn't happening on one file, it happens on a different one every time (but never gets to the end). How can I recover the data in this tar file? Is there a way to ignore this error and continue anyway? It is quite important to get this data back so I would really appreciate some help. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 56

[opensuse] Google repos
by Roger Oberholtzer 01 Sep '17

01 Sep '17

Is the information on this page about Google repos correct? https://en.opensuse.org/Additional_package_repositories The link is to a web page and not to a repo: https://www.google.com/linuxrepositories/ I have found Chrome here: http://dl.google.com/linux/chrome/rpm/stable/x86_64 And Earth here: http://dl.google.com/linux/earth/rpm/stable/x86_64 Maybe that is more useful info on the Additional_package_repositories page? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

Re: [opensuse] 42.3: I had to rework openvpn@.service
by Roger Price 01 Sep '17

01 Sep '17

On Thu, 31 Aug 2017, Rui Santos wrote: > openvpn.service is a systemd template and you cannot use directly. > > ... useful examples > > Also check this page (there are more) for more > info: https://www.digitalocean.com/community/tutorials/understanding-systemd-unit… Thanks, a good introduction. Better than reading systemd man pages. Roger

1 0