March 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] gpg error get_passphrase failed: Operation cancelled
by Richmond 12 Mar '17

12 Mar '17

Why do I get this error? It happens if I use "su - user" to switch to a different user and then try to decrypt a file. I am pretty sure it used to work. And it will work if I log in on the console as the different user. It should prompt for the passphrase in a window. gpg: CAST5 encrypted data gpg-agent[5394]: command get_passphrase failed: Operation cancelled gpg: cancelled by user gpg: encrypted with 1 passphrase gpg: decryption failed: No secret key I'm on 42.2 64 bit. gpg --version gpg (GnuPG) 2.0.24 libgcrypt 1.6.1 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 15

[opensuse] DNS lookup slow - autoconfig wireless from router
by Mikhail Ramendik 12 Mar '17

12 Mar '17

Hello, I am using wireless networking. In Yast, Wicked Service is selected. The wlan0 interface is set for DHCP and the DNS config is left at default values. I recently (some time after upgrade to 42.2) started getting delays every time a host is looked up. /etc/resolv.conf has these uncommented lines: == search suse home nameserver fe80::1%wlan0 nameserver 192.168.1.254 == So it seems like an ipv6 version is checked first and does not work. I don't need ipv6. I understand I can use yast to switch to manual DNS configuration, and just put 192.168.1.254 there (or 8.8.8.8 even). But this could lead to problems down the line if I later have to configure a different connection. Is there any way I can remove the ipv6 version while keeping auto-configuration working? -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] php: file_get_contents(): Unable to find the wrapper "https"
by Daniel Bauer 11 Mar '17

11 Mar '17

Hi, I have a php script that I use since years, but now something does not work anymore. on a file_get_contents on a https-URL I get Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP? and Warning: file_get_contents(): Unable to find the wrapper "https" - did you forget to enable it when you configured PHP? Well, I havn't configured anything since a long time, but there was a php update some days ago. What can I do? Daniel opensuse 42.1 PHP Version 5.5.14-75.1 apache 2.4.16-15.1 -- Daniel Bauer photographer Basel Barcelona https://www.patreon.com/danielbauer http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] KVM v. Vbox (howto fix kvm artifact and provide seamless mouse integration)
by David C. Rankin 11 Mar '17

11 Mar '17

All, I have hardware virtualization support on my laptop for KVM. and I generally need to virtualize a windows install for accounting/tax software. In the past I've always used vbox (from virtualbox.org) but the latest rpm is 13.2. I've used KVM on this laptop, but have run into artifacts at time and I do not like have to ctrl+alt to release the mouse. Does anybody have a tweak for KVM that will allow auto-mouse integration vbox guest additions, and has anyone found a way to get rid of the occasional window artifacts that appear on overlapping window move in KVM? I'm leaning toward vbox again, but would like to take advantage of KVM if I can make it work without artifact and get mouse integration down. I'm using virt-install/virt-manager, so if there are additional qemu command line switches that can help, that's probably what I need to try. What says the braintrust? Anybody tried/evaluated kvm verses vbox for win7 guests? Anybody experienced then cured the kvm/artifact on overlapping window move (e.g. a gtk app over an xterm will generally produce them -- but not always). Anybody found a way for seamless mouse integration with kvm like guest additions? (beyond '-usbdevice tablet' to prevent grabbing the mouse) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] I can't seem to get my public IP's to forward properly.
by Boyd Lynn Gerber 09 Mar '17

09 Mar '17

Hi, Here is my network setup http://pastebin.com/hriJqWea Here is the script I created to setup the routes. http://pastebin.com/RgsFQSXJ I had something similar working around 2008 before my stroke. I had my HD fail and and to re-install openSUSE 13.2. It's and old machine and newer versions of openSUSE will not work on the machine. I really need some assistance on getting this working. Thanks, -- Boyd Gerber <gerberb(a)zenez.com> 801 849-0213 ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Factory
by Tom Kacvinsky 09 Mar '17

09 Mar '17

How does one go about getting a package into Factory? I am reading [1] and I get the impression one has to file a FATE first. Is that the case? Thanks, Tom [1] https://en.opensuse.org/Factory -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] Some machine just can not x11vnc but others work fine?
by cagsm 09 Mar '17

09 Mar '17

I have once looked up some very basic way to grab some remotely running opensuse machine and see its real console pixels via vnc via vncviewer or similar. The machines are running leap 42.2 and basically I am ssh-ing into them and running as root (or via sudo) the following line: > sudo x11vnc -localhost -nolookup -nopw -display :0 -auth guess One machine works perfectly, prints out all sort of stuff that it is grabbing the local :0 session of X or vnc and those display and screen names and all that technical stuff. But this other machine never managed to do that. It quits and comes with a mere output of four error lines: > 09/03/2017 14:27:54 x11vnc version: 0.9.13 lastmod: 2011-08-10 pid: 2028 xauth: file /root/.Xauthority does not exist > 09/03/2017 14:27:54 -auth guess: failed for display=':0' > 09/03/2017 14:27:54 -auth guess: since we are root, retrying with FD_XDM=1 > 09/03/2017 14:27:54 -auth guess: failed for display=':0' What is wrong here and how can I make it work? The other machines it runs flawlessly detecting some of those settings automatically, and I can then vnc into it via an ssh-forwarded tcp port to the 5900 tcp port of that linux machine. That .Xauthority file doesnt exist on the working machines either, just as a remark. Weird. Whats up here? Thanks for all the help. TIA. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 11

[opensuse] Re: [OFF-LIST] retreat from TW to Leap 42.1 STATUS
by Felix Miata 09 Mar '17

09 Mar '17

Anton Aylward composed on 2017-03-08 21:50 (UTC-0500): > On 08/03/17 08:27 PM, Patrick Shanahan wrote: >>> Oh, that's cost the greeter won't let me log in as root! >>> EVER! That's not a bug or a missing package. >>> It supposed to be like that. >> /etc/sysconfig/displaymanager >> DISPLAYMANAGER_ROOT_LOGIN_LOCAL="yes" > Ahm, my problem is that yes I set that but the greeter still wont let me log in > as root. > The issue *is* in the /usr/share/kde4/config/kdm/kdmrc which needs to have > AllowRootLogin=true One of my biggest gripes with openSUSE is not putting non-memorable config bits that ought to be part of every decent backup plan into /etc/ somewhere, like Fedora does. I typically work around this by symlinking rather than trying to figure out where Fedora would have put it so as to override whatever controlling config is buried a bazillion layers deep in /usr/: /etc/kde/config # ll .. lrwxrwxrwx 1 root root 34 Dec 26 2015 kdm -> ../../../opt/kde3/share .. /etc/kde/config # rpmqa kdm kdebase3-kdm-3.5.10.1-325.1.x86_64 -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Anyone care to provide riot.im / matrix.org client for opensuse?
by cagsm 09 Mar '17

09 Mar '17

Hello there list, anyone care to provide a package and rpm-s for riot.im matrix.org client and more? <https://riot.im/desktop.html> TIA. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Re: [OFF-LIST] retreat from TW to Leap 42.1 STATUS
by Felix Miata 09 Mar '17

09 Mar '17

Anton Aylward composed on 2017-03-08 20:06 (UTC-0500): > Felix Miata wrote: >> KDM, KDM3 and TDM all permit configuring to allow root login local, with >> separate possibility to permit root login remote. > Ah. > Clue please. kdmrc/tdmrc self-document. AllowRootLogin= -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0