January 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Mouse hints (almost) unreadable
by Koenraad Lelong 06 Jan '17

06 Jan '17

Hi, On my Leap 42.1 system I have some applications where the mouse hints (when you hover the mouse cursor over a menu or button) are almost unreadable (white text on very light grey background). Is this fixable ? I tried _some_ things with system-configuration, but didn't find a solution. I don't remember what I did. I gave up because I don't use XSane that much. But now I discoverd that Kicad also has that problem, so I thought I would ask. TIA, Koenraad -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] PCIe SATA card with Marvell 88sx7042 chip no longer working
by Josef Wolf 06 Jan '17

06 Jan '17

Hello, I have 4-port PCIe SATA cards with Marvell 88sx7042 chip. Those cards worked for several years on an older AMD box with 12.X opensuse. Now I have upgraded to an Intel MB Z170-A an Opensuse Leap. With this new setup, those cards won't worl anymore. Sometimes, the system hangs during the boot process. Sometimes, the system boots, but when a disk is conntected to one of the card's ports (they are hot-pluggable), the detection of the disk won't work correctly. Any ideas whether there are any twaks to get those cards working? -- Josef Wolf jw(a)raven.inka.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] display and monitor settings
by dnomhcir＠gmx.com 06 Jan '17

06 Jan '17

I have connected a television via svideo, and I went into kde settings and selected display and monitor. In there I was able to configure the TV display and get it working. (There was a pictorial display showing the laptop display and s-video display. I was able to move them around, change resolutions and scaling etc). However later when I went back into the same settings, I no longer seeing what I saw before, I am just seeing screen locker and screen locker type. I am bewildered. How do I get into the settings I saw originally? Opensuse 14.2 Radeon graphics card. 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515/M54 [Mobility Radeon X1400] -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 24

[opensuse] How can I clear these YaST conflict list on 42.2?
by Carlos E. R. 06 Jan '17

06 Jan '17

I get this conflict list: nothing provides appdata(vmware-player.appdata.xml) needed by application:VMware Player-.noarch [ ] deinstallation of application:VMware Player-.noarch [ ] break application:VMware Player-.noarch by ignoring some of its dependencies nothing provides appdata(calibre-ebook-viewer.appdata.xml) needed by application:calibre - E-book Viewer-.noarch [ ] break application:calibre - E-book Viewer-.noarch by ignoring some of its dependencies [ ] deinstallation of application:calibre - E-book Viewer-.noarch nothing provides appdata(calibre-ebook-edit.appdata.xml) needed by application:calibre - E-book Editor-.noarch [ ] deinstallation of application:calibre - E-book Editor-.noarch [ ] break application:calibre - E-book Editor-.noarch by ignoring some of its dependencies application:calibre-.noarch requires appdata(calibre-gui.appdata.xml), but this requirement cannot be provided uninstallable providers: calibre-2.69.0-2.1.x86_64[download.opensuse.org-oss] [ ] deinstallation of application:calibre-.noarch [ ] break application:calibre-.noarch by ignoring some of its dependencies [ ] remove lock to allow installation of calibre-2.69.0-2.1.x86_64[download.opensuse.org-oss] But vmware-player is not installed, nor is calibre. I select above to remove calibre and vmware, nothing happens. System is Leap 42.2, upgraded from 13.1 Broken rpm database, perhaps? -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)

3 13

[opensuse] Redshift Gnome Extension - How Do I Apply a Patch File?
by Bryon Adams 06 Jan '17

06 Jan '17

Since Redshift isn't supposed to work on Wayland, I'm trying to figure out how to install this extension: https://github.com/benzea/gnome-shell-extension-redshift I created the zip file in the instructions and used Tweak Tool to install it, but I've never used a .patch file before and I have no idea what to do with it. Some searching shows using a "patch" program to run it which I've installed, but I'm having trouble following what to do. I think I have to use "/usr/share/gnome-settings-daemon" (sans quotes) as one of the arguments, along with the .patch file? Reading the bugzilla, the whole thing seems a bit hacky but I rather miss the color calibration. Thanks, Bryon -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] btrfs problem - how to run btrfsck on boot
by Paul Neuwirth 05 Jan '17

05 Jan '17

Hello, got a problem with a machine here. First question: how to run btrfsck on boot? adding fsck.mode=force as kernel parameter seems only to only to check boot partition. The rebooted system fails again after some minutes (see log at end of post) 2nd question. What happened? The system ran for weeks without problems, five days ago a reboot because of updates. Then a reset on the SATA bus occured, but the btrfs is running on a level 1 mdraid. btrfs failed and volumes get remount ro. This is what I found in the logs: [15233.444359] BTRFS info (device md2): relocating block group 62373494784 flags 34 [15234.994089] BTRFS info (device md2): relocating block group 63480791040 flags 34 [15236.060747] BTRFS info (device md2): relocating block group 63514345472 flags 34 [15237.072850] BTRFS info (device md2): relocating block group 63547899904 flags 34 [15238.148345] BTRFS info (device md2): relocating block group 63581454336 flags 34 [393168.772025] ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen [393168.772030] ata3.00: irq_stat 0x00400000, PHY RDY changed [393168.772032] ata3: SError: { PHYRdyChg LinkSeq TrStaTrns } [393168.772036] ata3.00: failed command: FLUSH CACHE EXT [393168.772041] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 19 res 40/00:94:c0:26:9c/00:00:08:00:00/40 Emask 0x10 (ATA bus error) [393168.772043] ata3.00: status: { DRDY } [393168.772046] ata3: hard resetting link [393172.792055] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [393172.793691] ata3.00: configured for UDMA/100 [393172.793695] ata3.00: retrying FLUSH 0xea Emask 0x10 [393172.793889] ata3: EH complete [394038.449156] BTRFS error (device md2): parent transid verify failed on 51072286720 wanted 132076 found 86207 [394038.463093] BTRFS error (device md2): parent transid verify failed on 51072286720 wanted 132076 found 86207 [394038.463105] ------------[ cut here ]------------ [394038.463159] WARNING: CPU: 1 PID: 491 at ../fs/btrfs/extent-tree.c:2927 btrfs_run_delayed_refs+0x27a/0x2f0 [btrfs]() [394038.463159] BTRFS: Transaction aborted (error -5) [394038.463200] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache af_packet iscsi_ibft iscsi_boot_sysfs snd_hda_codec_realtek snd_hda_codec_generic ext4 crc16 jbd2 mbcache snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore pcspkr acpi_cpufreq fjes i2c_nforce2 coretemp forcedeth shpchp processor btrfs xor raid6_pq raid1 md_mod uas usb_storage sr_mod cdrom sd_mod ata_generic nouveau firewire_ohci ahci ohci_pci libahci pata_amd mxm_wmi video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw drm firewire_core crc_itu_t ehci_pci ohci_hcd ehci_hcd usbcore libata usb_common wmi button sg scsi_mod autofs4 [394038.463203] CPU: 1 PID: 491 Comm: btrfs-transacti Not tainted 4.4.36-8-default #1 [394038.463203] Hardware name: PACKARD BELL BV iMedia X1082/MCP73, BIOS PBDIEGMB.P15 07/10/2008 [394038.463206] 0000000000000000 ffffffff81327b17 ffff880035fd3d78 ffffffffa0595699 [394038.463208] ffffffff8107e841 ffff880095f649a0 ffff880035fd3dc8 ffff88002a160f80 [394038.463209] 0000000000000000 ffff88002a160e10 ffffffff8107e8bc ffffffffa0598470 [394038.463210] Call Trace: [394038.463223] [<ffffffff81019ea9>] dump_trace+0x59/0x320 [394038.463226] [<ffffffff8101a26a>] show_stack_log_lvl+0xfa/0x180 [394038.463229] [<ffffffff8101b011>] show_stack+0x21/0x40 [394038.463233] [<ffffffff81327b17>] dump_stack+0x5c/0x85 [394038.463237] [<ffffffff8107e841>] warn_slowpath_common+0x81/0xb0 [394038.463240] [<ffffffff8107e8bc>] warn_slowpath_fmt+0x4c/0x50 [394038.463256] [<ffffffffa04fffea>] btrfs_run_delayed_refs+0x27a/0x2f0 [btrfs] [394038.463282] [<ffffffffa0515b20>] btrfs_commit_transaction+0x40/0xaf0 [btrfs] [394038.463301] [<ffffffffa051062b>] transaction_kthread+0x21b/0x280 [btrfs] [394038.463305] [<ffffffff8109d308>] kthread+0xc8/0xe0 [394038.463311] [<ffffffff8160ac8f>] ret_from_fork+0x3f/0x70 [394038.464013] DWARF2 unwinder stuck at ret_from_fork+0x3f/0x70 [394038.464013] Leftover inexact backtrace: [394038.464013] [<ffffffff8109d240>] ? kthread_park+0x50/0x50 [394038.465233] ---[ end trace 558b3d028338b98f ]--- [394038.465237] BTRFS: error (device md2) in btrfs_run_delayed_refs:2927: errno=-5 IO failure [394038.465239] BTRFS info (device md2): forced readonly [394038.465490] pending csums is 4096 what confuses me twice is this: parent transid verify failed [...] 132076 found 86207 this difference of transaction ids is very huge?! that is what happens after a reboot: [ 329.623911] BTRFS error (device md2): parent transid verify failed on 51072483328 wanted 132076 found 117819 [ 329.629476] BTRFS error (device md2): parent transid verify failed on 51072483328 wanted 132076 found 117819 [ 329.629493] ------------[ cut here ]------------ [ 329.629560] WARNING: CPU: 0 PID: 303 at ../fs/btrfs/extent-tree.c:2927 btrfs_run_delayed_refs+0x27a/0x2f0 [btrfs]() [ 329.629561] BTRFS: Transaction aborted (error -5) [ 329.629602] Modules linked in: joydev rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache snd_hda_codec_realtek snd_hda_codec_generic af_packet iscsi_ibft iscsi_boot_sysfs ext4 crc16 jbd2 mbcache snd_hda_codec_hdmi coretemp snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep pcspkr snd_pcm snd_timer acpi_cpufreq snd forcedeth fjes shpchp soundcore processor i2c_nforce2 btrfs xor raid6_pq raid1 md_mod uas usb_storage sd_mod sr_mod cdrom ata_generic ahci libahci pata_amd firewire_ohci nouveau ohci_pci mxm_wmi video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm firewire_core serio_raw crc_itu_t libata ehci_pci ohci_hcd ehci_hcd usbcore usb_common wmi button sg scsi_mod autofs4 [ 329.629605] CPU: 0 PID: 303 Comm: kworker/u8:3 Not tainted 4.4.36-8-default #1 [ 329.629606] Hardware name: PACKARD BELL BV iMedia X1082/MCP73, BIOS PBDIEGMB.P15 07/10/2008 [ 329.629625] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs] [ 329.629628] 0000000000000000 ffffffff81327b17 ffff8800351f3d28 ffffffffa05a9699 [ 329.629630] ffffffff8107e841 ffff8800bf5b0870 ffff8800351f3d78 ffff8800ba5611c0 [ 329.629631] 0000000000000020 ffff8800ba561050 ffffffff8107e8bc ffffffffa05ac470 [ 329.629632] Call Trace: [ 329.629651] [<ffffffff81019ea9>] dump_trace+0x59/0x320 [ 329.629655] [<ffffffff8101a26a>] show_stack_log_lvl+0xfa/0x180 [ 329.629658] [<ffffffff8101b011>] show_stack+0x21/0x40 [ 329.629662] [<ffffffff81327b17>] dump_stack+0x5c/0x85 [ 329.629667] [<ffffffff8107e841>] warn_slowpath_common+0x81/0xb0 [ 329.629670] [<ffffffff8107e8bc>] warn_slowpath_fmt+0x4c/0x50 [ 329.629686] [<ffffffffa0513fea>] btrfs_run_delayed_refs+0x27a/0x2f0 [btrfs] [ 329.629709] [<ffffffffa0514092>] delayed_ref_async_start+0x32/0x80 [btrfs] [ 329.629728] [<ffffffffa055a633>] normal_work_helper+0xc3/0x320 [btrfs] [ 329.629734] [<ffffffff810971e5>] process_one_work+0x155/0x440 [ 329.629737] [<ffffffff81097d26>] worker_thread+0x116/0x4b0 [ 329.629740] [<ffffffff8109d308>] kthread+0xc8/0xe0 [ 329.629746] [<ffffffff8160ac8f>] ret_from_fork+0x3f/0x70 [ 329.631628] DWARF2 unwinder stuck at ret_from_fork+0x3f/0x70 [ 329.631629] Leftover inexact backtrace: [ 329.631636] [<ffffffff8109d240>] ? kthread_park+0x50/0x50 [ 329.631638] ---[ end trace 92c71c247ee8d7b4 ]--- [ 329.631644] BTRFS: error (device md2) in btrfs_run_delayed_refs:2927: errno=-5 IO failure [ 329.631646] BTRFS info (device md2): forced readonly I am just looking for a blank DVD to start a live/rescue system. With other filesystems there was no such trouble, fsck was forced after unclean unmounts. Thanks a lot and happy christmas Paul -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

18 85

[opensuse] bluetooth in oS 13.1
by Istvan Gabor 05 Jan '17

05 Jan '17

Hello: I would like to pair an android mobile phone with my openSUSE 13.1 computer using bluetooth. I have a USB bluetooth dongle. If I plug it in I get: dmesg: [1197739.607581] usb 2-1.6: new full-speed USB device number 4 using ehci-pci [1197739.701186] usb 2-1.6: New USB device found, idVendor=1131, idProduct=1004 [1197739.701194] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [1197739.701199] usb 2-1.6: Product: ISSCEDRBTA [1197739.701203] usb 2-1.6: Manufacturer: ISSC [1197740.247566] Bluetooth: Core ver 2.16 [1197740.247577] NET: Registered protocol family 31 [1197740.247578] Bluetooth: HCI device and connection manager initialized [1197740.247587] Bluetooth: HCI socket layer initialized [1197740.247589] Bluetooth: L2CAP socket layer initialized [1197740.247592] Bluetooth: SCO socket layer initialized [1197740.265855] usbcore: registered new interface driver btusb # hwinfo --bluetooth 05: USB 00.0: 11500 Bluetooth Device [Created at usb.122] Unique ID: doL0.2At87c7gBb5 Parent ID: FKGF.Wkj53szWOaA SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0 SysFS BusID: 2-1.6:1.0 Hardware Class: bluetooth Model: "Integrated System Solution ISSCEDRBTA" Hotplug: USB Vendor: usb 0x1131 "Integrated System Solution Corp." Device: usb 0x1004 "ISSCEDRBTA" Revision: "3.73" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v1131p1004d0373dcE0dsc01dp01icE0isc01ip01in00" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (Hub) I have the following bluetooth-related packages installed: bluez-5.8-3.9.1.x86_64 libgnome-bluetooth12-3.10.0-1.1.x86_64 libbluetooth3-4.19-18.1.x86_64 bluez-compat-4.19-18.1.x86_64 gnome-bluetooth-3.10.0-1.1.x86_64 bluez-test-5.8-3.9.1.x86_64 typelib-1_0-GnomeBluetooth-1_0-3.10.0-1.1.x86_64 I don't have bluedevil because I don't have KDE4, I use KDE3. When I try to run bluetooth-wizard (of gnome-bluetooth package) I get: /usr/bin/bluetooth-wizard Agent registration failed: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: Method "RegisterAgent" with signature "os" on interface "org.bluez.AgentManager1" doesn't exist Googling for the message gives no result. How could I set up bluetooth connection? I used this very same USB dongle years ago in openSUSE 11.x or 12.2 with a gui tool without any problem. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] https://software.opensuse.org/ down
by Roger Oberholtzer 05 Jan '17

05 Jan '17

https://software.opensuse.org/ seems to be down all morning. Is this scheduled? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] leap 42.2 yast2 font size
by Istvan Gabor 05 Jan '17

05 Jan '17

Hello: I have installed openSUSE Leap 42.2. The process was very smooth, the installer is very nice. I only installed yet a minimal X windows system which offers IceWM window manager. Unfortunately Yast2 font size is too small for my eyes. How can I change Yast's font size? I ran qtconfig and set font size to 12 pt both as root and as normal user, but it did not had any effect. If I remember correctly previously it made the trick. I found that a y2controlcenter-qt.conf file is created after running Yast2 in /root/.config/YaST2 and ~/.config/YaST2. Can I add font setting to this file, if yes, how? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] libreoffice-kde4 Package
by sdm 04 Jan '17

04 Jan '17

On Leap 42.2 and probably also Tumbleweed, Libreoffice 5.2.3.3 is not pulling in the package `libreoffice-kde4` which when not installed, affects the look of the menus and fonts. Without this package, fonts are very small, hard to read and ugly (with a Windows 95 looking menu color). When I installed LibreOffice, I had to specify the `libreoffice-kde4` package to be installed as it's not pulled in automatically. There is another one called `libreoffice-gtk3` which I am assuming is the LibreOffice theming for GNOME. Would someone mind checking this out to see if either of the aforementioned packages are installed as a recommended dependency? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0