August 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] question on grub2 ...
by Dr.-Ing. Dieter Jurzitza 13 Aug '16

13 Aug '16

Dear listmembers, I am trying to figure out how grub2 does know which kernel to boot. /boot/grub2/grub.cfg shows the names, basically I would like to modify -pv to -default, editiing /boot/grub2/grub.cfg would be a nobrainer, however, the next update would remove this. Can any nice guy here tell me where I would have to change something in order to get from linux-XXX-pv to linux-XXX-default? I did not see this in /etc/default/grub.cfg, nor in /etc/grub.d, but it must be denoted somewhere, isn't it? Thank you very much, take care Dieter Jurzitza -- ----------------------------------------------------------- | \ /\_/\ | | ~x~ |/-----\ / \ /- \_/ ^^__ _ / _ ____ / <°°__ \- \_/ | |/ | | || || _| _| _| _| if you really want to see the pictures above - use some font with constant spacing like courier! :-) ----------------------------------------------------------- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Updating Tumbleweed
by A den Oudsten 13 Aug '16

13 Aug '16

Hi all, I have installed Tumbleweed with the 20160611 snapshot. Trial to update with ´zypper up´ resulted in ´nothing to do´. What did I wrong? André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] OT: FYI: Now Powered by SuSE Linux
by Mark Hounschell 12 Aug '16

12 Aug '16

Maybe the wrong place for this but this is praise to SuSE Linux. Over the last few years, four of the five have been re-hosted with a PC running SuSE Linux. The article doesn't specify this but I know it to be true. These are the work horses of WSMR. https://www.army.mil/article/161899/Multiple_Object_Tracking_Radars_at_WSMR Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Trying to get HP 1110 printer and Canon Pixma MG 2470 scanner working under OpenSuse
by Manish Jain 12 Aug '16

12 Aug '16

Hi, I am an OpenSuse newbie migrating from Windows XP. I am running OpenSuse 42.1 Leap (amd64) with HP 1110 printer and Canon Pixma MG 2470 scanner. I wish to get both these devices working. I ran hp-doctor which fixed all required dependencies. When I run hp-setup, I get the error "No devices found on bus usb". I have a HP 1110 queue in CUPS, as seen in the web browser interface. Printing from X clients like gedit to the CUPS printer queue returns with the message "Printing completed", but no printout actually emerges from the printer. Nor do the LED lights on the printer blink to show any data reception. When, as root, I run 'scanimage -L', I get "No scanners were identified". Running sane-find-scanner, I get : found USB scanner (vendor=0x04a9 [Canon], product=0x176c [MG2400 series]) at libusb:003:009 could not fetch string descriptor: Pipe error 'lsusb' gives me : Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 258a:0001 Bus 003 Device 004: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 003 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 003 Device 002: ID 214b:7000 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0480:a202 Toshiba America Info. Systems, Inc. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 093a:2521 Pixart Imaging, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for any help. Manish Jain

2 1

SOLVED: (Was Re: [opensuse] Succeed Login on pgAdmin3 but Failed via psql Command)
by Andi Sugandi 12 Aug '16

12 Aug '16

Hi, On Fri, Aug 12, 2016 at 1:11 PM, Ico Petrov <ico(a)tyro.homenet.org> wrote: > Hi, > > No, I mean this one: > > local all all md5 Great! It's now solved. Thank you very much. Best regards, -- Andi Sugandi. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Succeed Login on pgAdmin3 but Failed via psql Command
by Andi Sugandi 12 Aug '16

12 Aug '16

Hi all, I have postgresql-server and pgadmin installed on openSUSE Leap 42.1: postgresql-devel-9.4-1.1.noarch postgresql-init-9.4-9.1.noarch postgresql94-9.4.6-4.1.x86_64 postgresql94-devel-9.4.6-4.1.x86_64 postgresql94-server-9.4.6-4.1.x86_64 Using "md5" Method at: host all all 127.0.0.1/32 md5 in "/var/lib/pgsql/data/pg_hba.conf" file. A role user (named: "ovie") is able to login to DB via pgAdmin3* but failed via psql Command: $ psql -p 5432 -h localhost -U ovie -W Password for user ovie: psql: FATAL: Ident authentication failed for user "ovie" Any suggestions? *) http://goo.gl/erhDy6 Thanks in advance. -- Andi Sugandi. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] glib.h triggers new error: /usr/include/pthread.h:1000:58: error: expected ‘;’, ‘,’ or ‘)’ before ‘__cond’
by David C. Rankin 10 Aug '16

10 Aug '16

All, This is bewildering. On my 13.1 laptop, something broke building GTK apps in the last 10 days. Now compiling fails with: In file included from /usr/include/glib-2.0/glib/deprecated/gthread.h:123:0, from /usr/include/glib-2.0/glib.h:109, from /usr/include/glib-2.0/gobject/gbinding.h:30, from /usr/include/glib-2.0/glib-object.h:25, from /usr/include/glib-2.0/gio/gioenums.h:30, from /usr/include/glib-2.0/gio/giotypes.h:30, from /usr/include/glib-2.0/gio/gio.h:28, from /usr/include/gtk-2.0/gdk/gdkapplaunchcontext.h:30, from /usr/include/gtk-2.0/gdk/gdk.h:32, from /usr/include/gtk-2.0/gtk/gtk.h:32, from gtk_windef.h:4, from gtk_windef.c:1: /usr/include/pthread.h:1000:58: error: expected ‘;’, ‘,’ or ‘)’ before ‘__cond’ extern int pthread_cond_wait (pthread_cond_t *__rdstrict __cond, Huh? This is new, I've built this code 500 times, last without error on 7/29. The only apps installed on the system since then were from OSS: Tue 02 Aug 2016 08:31:55 PM CDT pcre-doc 8.33-2.1.2 Tue 02 Aug 2016 08:31:55 PM CDT pcre-tools 8.33-2.1.2 Mon 08 Aug 2016 01:57:47 PM CDT libada48 4.8.1_20130909-3.2.1 Mon 08 Aug 2016 01:57:51 PM CDT gcc-ada 4.8-2.1.2 Mon 08 Aug 2016 01:57:51 PM CDT gcc48-ada 4.8.1_20130909-3.2.1 I can't see any of thoses causing issue (sure the ada compiler is the same as the remaining gcc tools), e.g.: rpm -qa | grep gcc | sort gcc-32bit-4.8-2.1.2.x86_64 gcc-4.8-2.1.2.x86_64 gcc-ada-4.8-2.1.2.x86_64 gcc-c++-4.8-2.1.2.x86_64 gcc-fortran-4.8-2.1.2.x86_64 gcc-gij-4.8-2.1.2.x86_64 gcc-info-4.8-2.1.2.x86_64 gcc-java-4.8-2.1.2.x86_64 gcc-objc-4.8-2.1.2.x86_64 gcc48-32bit-4.8.1_20130909-3.2.1.x86_64 gcc48-4.8.1_20130909-3.2.1.x86_64 gcc48-ada-4.8.1_20130909-3.2.1.x86_64 gcc48-c++-4.8.1_20130909-3.2.1.x86_64 gcc48-fortran-4.8.1_20130909-3.2.1.x86_64 gcc48-gij-4.8.1_20130909-3.2.1.x86_64 gcc48-info-4.8.1_20130909-3.2.1.noarch gcc48-java-4.8.1_20130909-3.2.1.x86_64 gcc48-objc-4.8.1_20130909-3.2.1.x86_64 gccmakedep-1.0.2-6.1.2.noarch libgcc_s1-32bit-4.8.1_20130909-3.2.1.x86_64 libgcc_s1-4.8.1_20130909-3.2.1.x86_64 Did installing ada cause some regression? Passing -DG_DISABLE_DEPRECATED solves the problem, but I've never had to disable depricated headers before. Now simply including glib.h causes the error. Has anyone else run into this problem? Has anyone else found a fix? (side note: it also disclosed glib's abuse of enum in /usr/include/glib-2.0/gobject/gparam.h with G_PARAM_DEPRECATED = 1 << 31 which is definitely not an 'int' constant [by +1]) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] Troubleshooting DHCP server setup?
by Mikhail Ramendik 09 Aug '16

09 Aug '16

Hello, I am running Leap. I have two network interfaces, eth0 and wlan0. I use wlan0 for my home LAN which supplies the Internet. I would like to have a DHCP server for eth0 to provide occasional high-speed wired connections for FTP/Samba transfers. I do not need to do any NAT, the link is for local transfers only. I am trying to use the standard OpenSUSE way. I have installed the "DHCP and DNS server" package in yast and am trying to condfigure DHCP in yast. But I get "error occurred while restarting the DHCP daemon". Here is the log with the apparent reason: == > cat /var/log/rc.dhcpd.log Internet Systems Consortium DHCP Server 4.3.3 Copyright 2004-2015 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file Config file: /etc/dhcpd.conf Database file: /db/dhcpd.leases PID file: /var/run/dhcpd.pid Wrote 0 leases to leases file. No subnet declaration for eth0 (no IPv4 addresses). ** Ignoring requests on eth0. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth0 is attached. ** Not configured to listen on any interfaces! If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. == I did select eth0 in the DHCP config, and its address is 192.168.4.1, static, as shown in yast network settings (but for some reason the address is absent in ifconfig). Here is the content of /etc/dhcpd.conf: = # cat /etc/dhcpd.conf option domain-name "ramendik.local"; ddns-update-style none; default-lease-time 14400; ldap-dhcp-server-cn "ramendik.local"; subnet 192.168.4.0 netmask 255.255.255.0 { range 192.168.4.2 192.168.4.100; default-lease-time 14400; max-lease-time 172800; } = So, apparently a fitting subnet statement exists, but is not applied for eth0. How can I fix this, and what am I doing wrong with yast? -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] VLC not playing MP4
by Anton Aylward 09 Aug '16

09 Aug '16

I'm sure we've been down this road before ... I'm trying to pay some MP4 files,. sadly a VLC upgrade and some other - ffmpeg? - upgrades seem to have broken most of my capability to play them VLC is saying VLC could not decode the format "h264" (H264 - MPEG-4 AVC (part 10)) I've tried vlc-beta as well # zypper info vlc-beta Information for package vlc-beta: --------------------------------- Repository: Packman Repository Name: vlc-beta Version: 3.0.0+git7892-1.8 Arch: x86_64 Vendor: http://packman.links2linux.de Installed: Yes Status: up-to-date Installed Size: 411.0 KiB Summary: Video Lan Client multimedia player (preview of the upcoming 3.x version) Description: VLC media player is a highly portable multimedia player for various audio and video formats (MPEG-1, MPEG-2, MPEG-4, DivX, mp3, ogg, ...) as well as DVDs, VCDs, and various streaming protocols. It can also be used as a server to stream in unicast or multicast in IPv4 or IPv6 on a high-bandwidth network. There's also the layers of stuff under 'tools->settings' 'lspci' tells me 00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) I also have Name: xorg-x11-server Version: 7.6_1.18.3-463.5 Name: vaapi-intel-driver Version: 1.7.1-43.1 Name: xf86-video-intel Version: 2.99.917.674_g9154dff-178.1 There are times I hate doing upgrades! -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 43

[opensuse] leap421 - dolphin with fish:// ?
by Per Jessen 09 Aug '16

09 Aug '16

I can't seem to get $SUBJ to work, in Dolphin I keep getting a pop-up asking for the password. Connecting with ssh from the command line works fine. I was just wondering if anyone has got this to work? -- Posted with knode 4.14 from openSUSE Leap42.1 office34: Cyrix 486DX2/66MHz, 4096Mb RAM, #9 GXE -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13