August 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] why does konsole use processor power after it's closed?
by Daniel Bauer 15 Aug '16

15 Aug '16

Hi, I'm here on leap 42.1 with kde 5. Sometimes I use konsole to do some little things, then I close it. But it seems the program does not terminate. Right now I had two Konsole processes, each consuming 13% of my i7 cpu power - but no konsole window open and nothing that could still run within konsole. I am sure that there is nothing running, because I just used it to start a program, terminated it and was back on the prompt again before I exited konsole. I then kill these processes manually. Of course I can do that whenever I use konsole, but shouldn’t a program terminate itself when its terminated and stop eating my battery? And what could konsole do that uses 13% of such a powerful processor? Anybody else sees this problem? What could I do? Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] SuSE Leap with Virtualbox
by Damon Register 15 Aug '16

15 Aug '16

About two weeks ago I asked some questions about runlevel 3 with openSuSE versus Mint. The answers were helpful and I was able to get past that so that I can boot to non-graphical. That all started with trying to use Virtualbox and believing that I needed a newer graphics card. Now I have the host system with Mint KDE and the new Nvidia 960. I am now trying to install several different Linux distributions as Virtualbox guests. It took a bit of work but finally I was able to install two versions of Mint and get them to work properly with the host graphics card. Now I am trying to install openSuSE Leap 42.1 as a Virtualbox guest on this same system but am not having as much luck. The installation seemed to go OK and it booted OK after the install but I did get a message suggesting I update the Virtualbox guest components. After the update, I reboot the guest and I get most of the normal desktop but the taskbar is missing. I can click on the lower left corner where the app launcher button would be and I get the menu. I can click on any app such as console but it doesn't appear on the desktop. I can then click on where the taskbar should be and can see that the app is there but nothing actually appears on the desktop. Anyone have an idea what might be wrong? On a related (sort of) subject, I thought I might try to get a console (ctl alt F1) but I don't know how to get that key sequence to go to the guest and not the host. Can anyone please tell me how I can get a console in a guest? Damon Register -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Can't install Wireshark 2.05 openSUSE 13.1
by James Knott 14 Aug '16

14 Aug '16

I have 2 systems running openSUSE 13.1. I installed Wireshark 2.05 on one where it runs fine, but on the other I get an error message: Unknown message from dumpcap, try to show it as a string: /usr/bin/dumpcap: symbol lookup error: /usr/bin/dumpcap: undefined symbol: pcap_set_tstamp_precision I'm installing from https://software.opensuse.org/download.html?project=network%3Autilities&pac… Any idea what's causing this error and only on the one system? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] find ip address of connected site in firefox
by Istvan Gabor 14 Aug '16

14 Aug '16

Hello: I run firefox which is connected to a website. How can I find the IP address of the connected site, possibly running a terminal application. I know there are firefox addons that can do this but I don't have any installed and I don't want to restart firefox. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 17

[opensuse] A puzzle for the weekend
by Per Jessen 14 Aug '16

14 Aug '16

I have a cron job running every 20 minutes monitoring a temperature sensor for minor changes in trend up/down. This has been running for a few months. Today at 1521 I got a warning that the trend dad changed to slightly upward. The next one failed on a DNS issue. The puzzle: wget -nd http://office20.local.net:4444/--slope--/1.2.3.4/0 --2016-08-12 20:38:24-- http://office20.local.net:4444/--slope--/1.2.3.4/0 Resolving office20.local.net (office20.local.net)... failed: Name or service not known. wget: unable to resolve host address ‘office20.local.net’ So clearly "office20.local.net" does not resolve. Except: > host office20.local.net office20.local.net has address 192.168.3.20 > ping office20.local.net PING office20.local.net (192.168.3.20) 56(84) bytes of data. 64 bytes from office20.local.net (192.168.3.20): icmp_seq=1 ttl=64 time=0.029 ms 64 bytes from office20.local.net (192.168.3.20): icmp_seq=2 ttl=64 time=0.040 ms > dig office20.local.net a ; <<>> DiG 9.9.4-rpz2.13269.14-P2 <<>> office20.local.net a ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 30802 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 3 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;office20.local.net. IN A ;; ANSWER SECTION: office20.local.net. 86400 IN A 192.168.3.20 So clearly "office20.local.net" _does_ resolve. Except in wget. No changes were applied to this system for at least a month, likely longer. Why can't wget resolve the address when others have no problem? -- Per Jessen, Zürich (21.2°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 14

[opensuse] question on grub2 ...
by Dr.-Ing. Dieter Jurzitza 13 Aug '16

13 Aug '16

Dear listmembers, I am trying to figure out how grub2 does know which kernel to boot. /boot/grub2/grub.cfg shows the names, basically I would like to modify -pv to -default, editiing /boot/grub2/grub.cfg would be a nobrainer, however, the next update would remove this. Can any nice guy here tell me where I would have to change something in order to get from linux-XXX-pv to linux-XXX-default? I did not see this in /etc/default/grub.cfg, nor in /etc/grub.d, but it must be denoted somewhere, isn't it? Thank you very much, take care Dieter Jurzitza -- ----------------------------------------------------------- | \ /\_/\ | | ~x~ |/-----\ / \ /- \_/ ^^__ _ / _ ____ / <°°__ \- \_/ | |/ | | || || _| _| _| _| if you really want to see the pictures above - use some font with constant spacing like courier! :-) ----------------------------------------------------------- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Updating Tumbleweed
by A den Oudsten 13 Aug '16

13 Aug '16

Hi all, I have installed Tumbleweed with the 20160611 snapshot. Trial to update with ´zypper up´ resulted in ´nothing to do´. What did I wrong? André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] OT: FYI: Now Powered by SuSE Linux
by Mark Hounschell 12 Aug '16

12 Aug '16

Maybe the wrong place for this but this is praise to SuSE Linux. Over the last few years, four of the five have been re-hosted with a PC running SuSE Linux. The article doesn't specify this but I know it to be true. These are the work horses of WSMR. https://www.army.mil/article/161899/Multiple_Object_Tracking_Radars_at_WSMR Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Trying to get HP 1110 printer and Canon Pixma MG 2470 scanner working under OpenSuse
by Manish Jain 12 Aug '16

12 Aug '16

Hi, I am an OpenSuse newbie migrating from Windows XP. I am running OpenSuse 42.1 Leap (amd64) with HP 1110 printer and Canon Pixma MG 2470 scanner. I wish to get both these devices working. I ran hp-doctor which fixed all required dependencies. When I run hp-setup, I get the error "No devices found on bus usb". I have a HP 1110 queue in CUPS, as seen in the web browser interface. Printing from X clients like gedit to the CUPS printer queue returns with the message "Printing completed", but no printout actually emerges from the printer. Nor do the LED lights on the printer blink to show any data reception. When, as root, I run 'scanimage -L', I get "No scanners were identified". Running sane-find-scanner, I get : found USB scanner (vendor=0x04a9 [Canon], product=0x176c [MG2400 series]) at libusb:003:009 could not fetch string descriptor: Pipe error 'lsusb' gives me : Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 258a:0001 Bus 003 Device 004: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 003 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 003 Device 002: ID 214b:7000 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0480:a202 Toshiba America Info. Systems, Inc. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 093a:2521 Pixart Imaging, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for any help. Manish Jain

2 1

SOLVED: (Was Re: [opensuse] Succeed Login on pgAdmin3 but Failed via psql Command)
by Andi Sugandi 12 Aug '16

12 Aug '16

Hi, On Fri, Aug 12, 2016 at 1:11 PM, Ico Petrov <ico(a)tyro.homenet.org> wrote: > Hi, > > No, I mean this one: > > local all all md5 Great! It's now solved. Thank you very much. Best regards, -- Andi Sugandi. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0