May 2014 - openSUSE Users - openSUSE Mailing Lists

[opensuse] I can not filter out some systemd messages in syslog
by Carlos E. R. 17 May '16

17 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have this in "/etc/rsyslog.conf": if ($programname == 'named' or $syslogtag == '[named]:') \ then -/var/log/named & stop ... if ($msg contains 'Started Session' and $msg contains 'of user') \ then -/var/log/systemdpurged & stop # # the rest in one file # *.*;mail.none;news.none -/var/log/messages I get the expected entries in "/var/log/systemdpurged": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Started Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Started Session 94 of user news. But I'm also getting them in "/var/log/messages": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Starting Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Starting Session 94 of user news. And they should not be there. So the "stop" line for those systemd entries is not acting. However, it works for other sections, like the "named" section shown above, and others I do not show for clarity. Are systemd entries special? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlMSADcACgkQtTMYHG2NR9WCgwCdEgnb+Apy47tcjI31Dv5brA9X +TMAoIt87JaGgMoP5Zf11OZM0XevIjif =uI81 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Namebench
by Steven Hess 25 Dec '15

25 Dec '15

There was a previews thread where namebench was mentioned. I thought it was the optimizing resolv.conf thread. Anyway this is a different issue. Id like to run it. The ones I located in OBS were not functional here. What could I do to try another source? Thanks Steven -- ____________ Apply appropriate technology. Use what works without prejudice. Steven L Hess ARS KC6KGE DM05gd22 Owner Flex-1500 and Flex-3000, FT-857D, FT-817ND, FT-450 openSUSE Linux 12.3 KDE Known as FlameBait and The Sock Puppet of Doom. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Where can I get genIS_PLAINcache
by Chuck Payne 09 Nov '15

09 Nov '15

Hi, I am trying to set up a simple repo, I read on the opensuse site about a binary called genIS_PLAINcache, because I can't see to find it or the package yast2-packmanager either. Can someone help. I am setting this repo up for SLE9, I have tried to use createrepo but I keeping getting errors. -- ---------------------------------------- When a place gets crowded enough to require ID's, social collapse is not far away. It is time to go elsewhere. The best thing about space travel is that it made it possible to go elsewhere. -- Robert Heinlein -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] No sound in Minecraft
by Mike 03 Feb '15

03 Feb '15

I've asked on the minecraft forums without a response so I'm trying here in case that it might be a SuSE configuration issue. I do not have sound in the game. This has been a problem for several versions nowCurently running 1.7.5. I've also tried the last 2 snapshots. I can play music fine and was able to play the sound files in .mineraft/assets/objects/* via Amarok. I have deleted the assets folder and had re-downloaded everything. I looked in the bug list and I found a few sound related issues, but they suggested that there was some sounds. The log only mentions minecraft:mob.witch.idle, but there are no sounds at all in game, but in options everything is set to 100%. I tried to force an older version in profile editor but still no sound going back to 1.4.2. I see a java Playback Stream in the mixer and volume is 100% there too. Any ideas? Relevant entries in dev console [16:00:51 INFO]: Minecraft Launcher 1.3.11 (through bootstrap 4) started on linux... [16:00:51 INFO]: System.getProperty('os.name') == 'Linux' [16:00:51 INFO]: System.getProperty('os.version') == '3.7.10-1.24-desktop' [16:00:51 INFO]: System.getProperty('os.arch') == 'amd64' [16:00:51 INFO]: System.getProperty('java.version') == '1.7.0_51' [16:00:51 INFO]: System.getProperty('java.vendor') == 'Oracle Corporation' [16:00:51 INFO]: System.getProperty('sun.arch.data.model') == '64' [10:12:37 INFO]: Client> [10:12:37] [Server thread/INFO]: Changing view distance to 12, from 10 [10:16:23 INFO]: Client> [10:16:23] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:46:00 INFO]: Client> [10:46:00] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:46:08 INFO]: Client> [10:46:08] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:47:14 INFO]: Client> [10:47:14] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:47:20 INFO]: Client> [10:47:20] [Client thread/WARN]: Unable to play unknown soundEvent: minecraft:mob.witch.idle [10:55:42 INFO]: Client> [10:55:42] [Client thread/INFO]: Stopping! [10:55:42 INFO]: Client> [10:55:42 INFO]: Client> SoundSystem shutting down... [10:55:42 INFO]: Client> Author: Paul Lamb, www.paulscode.com [10:55:42 INFO]: Client> [10:55:48 ERROR]: java.io.IOException: Stream closed [10:55:48 INFO]: Game ended with no troubles detected (exit code 0) -- Collector of vintage computers http://www.ncf.ca/~ba600 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] DenyHosts daemon mode on openSUSE 11.3
by LLLActive＠GMX.Net 23 Jan '15

23 Jan '15

Hi, I am trying to run DenyHosts on OS 11.3. I can get it to sync and update the hosts.deny file, but with "rcdenyhosts status" it reports as being "unused" just after I started it with "rcdenyhosts start". I tried also with yast, setting up as a service (daemon) and starting it. It also stops immediately. In the denyhosts.log file there is no error info, just what it used to set it up at start. I've gone through the configs several times, no joy. Anyone got DenyHosts running properly? :-/ Dreiel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] running a program before shutdown
by Benjamin 23 Nov '14

23 Nov '14

Hi everyone! I do have a small problem: I want to run unison before i log out of kde, so that my files are synchronized automatically. I created a .desktop file and placed it in /.kde4/shutdown/. The .desktop file is specified by the command: unison myprofile -batch I tried it, but it seems, that this doesn´t work, because nothing was synchronized after login in again. Although in the systemsettings in the category autostart, my .desktop is listed and set to logout. Any suggestions. Best Benjamin! ps.: I already tried it with a shell-scrpit, which i also placed in the shutdown folder, but this also didn´t work…

8 16

[opensuse] XFS filesystem total failure on return from hibernation.
by Carlos E. R. 05 Oct '14

05 Oct '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, Since yesterday (after an update), I have experimented twice the same problem, on return from hibernation. XFS fails completely, lots of kernel messages. System has to be restarted, recovery is impossible otherwise. It seems to affect one partition only (?), the one that has my home, on xfs. I booted the 13.1 XFCE rescue image, tried to xfs-repair that one. It complained that there was a log, that I should attempt to mount it first. Mount hung. It is unkillable. Reboot of system hung. smartctl -a gives no hint of problem. The hard disk is new (190 hours). I run "xfs_repair -L" on that disk, which succeeds with no error report. I'm at the moment running the long SMART test on that disk. It will take 226 minutes. This is the first report of error in the log: I will put a more complete version of the log in another post. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iF4EAREIAAYFAlMk14AACgkQja8UbcUWM1wgoQD/Ssm98MXd5XSXqi6AkdjhgHmR z+PSYYCkgbupkpnLJAgA/0WO9+HQ9Wgn7XzkVLQkv3RreJT/nZQfJRLx39TqWMar =cU8T -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 13

[opensuse] opensuse 13.1 annoying limitations
by Marco Calistri 31 Aug '14

31 Aug '14

As per the subject, IMHO this is the list: 1) BLUETOOTH doesn't works completely 2) Power Management "sucks" with laptops 3) Totem warnings the user to download plug-ins which are not necessary or which cannot get downloaded and installed I consider all the above as limitations in a modern O.S. Sorry for my commentary! Regards, -- WARNING TO ALL PERSONNEL: Firings will continue until morale improves. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 27

[opensuse] Why is systemd[1] is mounting noauto partitions?
by Michael Fischer 09 Jul '14

09 Jul '14

This hit me before, and the advice on the list was to make the partitions 'noauto' in /etc/fstab, which worked... until today. I have a 2-partition external usb drive. Relevant /etc/fstab lines: /dev/disk/by-id/ata-ST2000DM001-1E6164_W1E4R7CL-part1 /data5 ext4 noatime,user,noauto,acl,user_xattr,nofail 1 2 /dev/disk/by-id/ata-ST2000DM001-1E6164_W1E4R7CL-part2 /data6 ext4 noatime,user,noauto,acl,user_xattr,nofail 1 2 /var/log/messages shows: (I've trimmed the date and host to make the lines shorter) 2014-05-24 host /usr/sbin/cron[19321]: pam_unix(crond:session): session opened for user root by (uid=0) 2014-05-24 host /USR/SBIN/CRON[19321]: pam_unix(crond:session): session closed for user root 2014-05-24 host systemd[1]: Starting Cleanup of Temporary Directories... 2014-05-24 host systemd[1]: Started Cleanup of Temporary Directories. 2014-05-24 host /usr/sbin/cron[19711]: pam_unix(crond:session): session opened for user root by (uid=0) 2014-05-24 host /USR/SBIN/CRON[19711]: pam_unix(crond:session): session closed for user root 2014-05-24 host /usr/sbin/cron[20515]: pam_unix(crond:session): session opened for user root by (uid=0) 2014-05-24 host /USR/SBIN/CRON[20515]: pam_unix(crond:session): session closed for user root 2014-05-24 host systemd[1]: Unmounting /data5... 2014-05-24 host umount[20557]: umount: /data5: target is busy. 2014-05-24 host umount[20557]: (In some cases useful info about processes that use 2014-05-24 host umount[20557]: the device is found by lsof(8) or fuser(1)) 2014-05-24 host systemd[1]: data5.mount mount process exited, code=exited status=32 2014-05-24 host systemd[1]: Failed unmounting /data5. 2014-05-24 host mtp-probe: checking bus 4, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb4/4-2" 2014-05-24 host mtp-probe: bus: 4, device: 8 was not an MTP device 2014-05-24 host systemd[1]: Found device ST2000DM001-1E6164. 2014-05-24 host systemd[1]: Found device ST2000DM001-1E6164. 2014-05-24 host systemd[1]: Starting File System Check on /dev/disk/by-id/ata-ST2000DM001-1E6164_W1E4R7CL-part2... 2014-05-24 host systemd-fsck[20587]: /dev/sde2: clean, 224834/54992896 files, 39120841/219942400 blocks 2014-05-24 host systemd[1]: Started File System Check on /dev/disk/by-id/ata-ST2000DM001-1E6164_W1E4R7CL-part2. 2014-05-24 host systemd[1]: Mounting /data6... 2014-05-24 host systemd[1]: Mounted /data6. /data5 and /data6 should not be getting mounted by anything other than me, as I understand it. This behavior screws up programs sourcing files on those partitions. Or is 'noauto' only about boot time (man page suggests such)? What systemd service is doing this? How is it launched? And is there a better way to tell systemd to stop this behavior on those partitions? Thanks. Michael -- Michael Fischer michael(a)visv.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

27 86

[opensuse] What is the "official" way to mount floppy in openSUSE 12.x?
by Istvan Gabor 20 Jun '14

20 Jun '14

Hello: The subject says the question. [In pre 12 suse versions I had a /media/floppy directory where the floppy could be mounted at (by using the floppy icon on KDE3's desktop). In 12.x there is no such directory, and if created it will be removed at next boot, as I know correctly. Of course I could make a floppy dir under / or somewhere else, but I'd prefer its location to be in /media, since floppy is a media. Why should it be then outside of media dir?] What is the official way of mounting floppy in 12.x.? I have openSUSE 12.1 with KDE3 currently. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

20 70