September 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Drive, space and usage
by Duaine Hechler 07 Oct '13

07 Oct '13

I am upgrading from 500GB to 1TB drives. The 500GB drives are 99% full. After I do the initial upgrade, how is the data spread across the drive ? Contiguous from front to back like Windows FS ? Or evenly spread (but contiguously) across the drive ? Ultimately, I'm trying to figure out - is the front of the drive going to get the brunt of the work or is the data going to be scattered across the drive. General layout: root (/) swap /home (rest of drive) TIA, Duaine -- Duaine Hechler Piano, Player Piano, Pump Organ - Tuning, Servicing & Rebuilding (314) 838-5587 / dahechler(a)att.net / www.hechlerpianoandorgan.com Home & Business user of Linux - 13 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

14 65

[opensuse] On switching from runlevel 3 to 5, two partitions are umounted (by systemd??)
by Carlos E. R. 03 Oct '13

03 Oct '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I boot this system in level 3, text mode with network. Some times I manually mount two encrypted partitions there, as root. Then I switch to runlevel 5, and log in. Eventually, I noticed that those two partitions were not mounted. I thought that perhaps I did not mount them. So this time I checked. I mounted them, and verified that the content was available. I then started level 5 (init 5). I typed ctrl-alt-f1, and listed the content of those partitions: not mounted. Not only that, but the "/dev/mapper/..." device had disappeared as well. This is 12.3. Problem happens on every boot. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlJCJEEACgkQtTMYHG2NR9WmBgCfTk0PfcGUXxYh6VN8Exeeik8A xQ4An1RLzrsBnSC9rrANb1vCDbx6d3Q3 =z19R -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 16

[opensuse] Fwd: How to save my current installation set up
by Pol (Admin) 03 Oct '13

03 Oct '13

I would like to save my list of installed packages, in order to recover the same setup, after reinstalling opensuse. Any hints? thank you -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 9

[opensuse] KDE WM appears to have died
by Richard 02 Oct '13

02 Oct '13

Caveat: I am not a programmer and will likely not understand programmer- speak. Recently, running 11.4, happily for quite some time I might add, the login failed and I could not re-start it. Switched to another terminal but found nothing useful to me. Using startx in another terminal the return message said to remove the /tmp/.X0-lock file and try again, which I did, to no happiness. Not wanting to venture too far into areas I do not know or understand, I decided to upgrade to 12.3 with the thought that that might fix things along the way. Has not. I now see messages suggesting issues with plastic(?) and fatal errors. I have, however, been able to log in and work using the IceWM. I also tried adding many files for Gnome to see if that would become an available WM. Only got an error message for that. Would like to get back to KDE, but would not be against a Gnome experience. Is there something simple I am missing (almost certainly so)? I will try to write down more of error messages as I assume someome will want that. Thanks for your attention and any assistance. Richard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

18 36

[opensuse] legacy device support on modern motherboard and linux
by Istvan Gabor 02 Oct '13

02 Oct '13

Hello: Most modern motherboards do not have serial, parallel, IDE, floppy, and even PCI ports. I guess there exist PCI-E expansion cards for serial, parallel, and IDE connection. The question is whether they are usable in linux. Will e.g. a serial card work in linux with my serial modem or other old device with serial port? The same question applies to parallel and IDE connections. Previously on this forum someone wrote that floppy PCI/PCI-E cards are not working in linux. Do USB floppy work? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 46

[opensuse] My firefox tries to browse files using an mp3 editor.
by Carlos E. R. 01 Oct '13

01 Oct '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, When I open the list of downloads in Firefox, and I right click on a file, and select "open containing folder", what it opens is "easytag", (an application to manage mp3 tags) instead of any file browser. This happened since I used easytag the other day, previously it worked correctly. I do not see where to change this back. Using: cer@Telcontar:~> rpm -qa | grep -i mozilla mozilla-nspr-32bit-4.10-1.14.1.x86_64 MozillaFirefox-23.0-1.29.1.x86_64 mozilla-nspr-4.10-1.14.1.x86_64 mozilla-kde4-integration-0.6.4-2.1.1.x86_64 MozillaFirefox-branding-openSUSE-21-2.5.1.x86_64 mozilla-nss-devel-3.15.1-1.12.1.x86_64 ca-certificates-mozilla-1.85-3.1.1.noarch MozillaThunderbird-17.0.8-61.21.2.x86_64 mozilla-nspr-devel-4.10-1.14.1.x86_64 mozilla-nss-32bit-3.15.1-1.12.1.x86_64 mozilla-nss-3.15.1-1.12.1.x86_64 mozilla-nss-certs-32bit-3.15.1-1.12.1.x86_64 mozilla-nss-certs-3.15.1-1.12.1.x86_64 cer@Telcontar:~> oS 12.3, XFCE desktop. grepping the contents of all the files in .mozilla/firefox/XXX.default/, I find not a single configuration that points to "easytag", except links pointing to the page <http://projects.gnome.org/easytag/> How can I change this stupid behaviour? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlJItmQACgkQtTMYHG2NR9WOWQCeP09LDLYhzTpd6Kcmo1MOxHJ/ NE8AnA1Zq8+fxjp2pv3sMuSl1XqWch/7 =Bym2 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 11

[opensuse] mounting wrong partition after upgrade
by Mike 01 Oct '13

01 Oct '13

I just finished a painful upgrade to 12.3 (zypper dup dropped me to emergency console) things now seem to be restored, but the system is mounting /dev/sda7 as /usr rather than what is in fstab I created a copy in this partition when the ext3 partitions were not being found, so it's still working, but it's not as big as I'd like. Could my switching fstab to device rather than ID be the cause? Seems like a bunch of new stuff (cgroup fuse, hugetlbfs) is being mounted now. fstab: /dev/disk/by-id/scsi-SATA_Hitachi_HDP7250_GEB530RE1T52EB-part6 / ext3 acl,user_xattr 1 1 /dev/sdb7 /home ext3 acl,user_xattr 1 2 /dev/sdb2 /usr ext3 defaults 0 0 /dev/sdb5 swap swap defaults 0 0 /dev/sda5 swap swap defaults 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 none /proc/bus/usb usbfs devgid=1000,devmode=664 0 0 mtab: rootfs / rootfs rw 0 0 devtmpfs /dev devtmpfs rw,relatime,size=2010748k,nr_inodes=502687,mode=755 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 tmpfs /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/sdb6 / ext3 rw,relatime,data=ordered 0 0 /dev/sda7 /usr ext4 rw,relatime,data=ordered 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0 tmpfs /sys/fs/cgroup tmpfs rw,nosuid,nodev,noexec,mode=755 0 0 cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0 cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0 cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct,cpu 0 0 cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0 cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0 cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0 cgroup /sys/fs/cgroup/net_cls cgroup rw,nosuid,nodev,noexec,relatime,net_cls 0 0 cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0 cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0 cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0 systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=25,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0 mqueue /dev/mqueue mqueue rw,relatime 0 0 hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0 tmpfs /var/lock tmpfs rw,nosuid,nodev,relatime,mode=755 0 0 debugfs /sys/kernel/debug debugfs rw,relatime 0 0 tmpfs /var/run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0 /dev/sdb7 /home ext3 rw,relatime,data=ordered 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 vmware-vmblock /var/run/vmblock-fuse fuse.vmware-vmblock rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other 0 0 vmware-vmblock /run/vmblock-fuse fuse.vmware-vmblock rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other 0 0 none /var/lib/ntp/proc proc ro,nosuid,nodev,relatime 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0 gvfsd-fuse /var/run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0 dmesg: [ 577.832123] EXT4-fs (sdb6): mounting ext3 file system using the ext4 subsystem [ 577.875121] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 578.075333] EXT4-fs (sdb6): re-mounted. Opts: acl,user_xattr [ 578.318794] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) ... [ 580.863464] EXT4-fs (sda7): re-mounted. Opts: (null) [ 581.041726] EXT4-fs (sdb6): re-mounted. Opts: acl,user_xattr -- Collector of vintage computers http://www.ncf.ca/~ba600 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] oS 12.3 and postfix start at boot
by Roger Oberholtzer 30 Sep '13

30 Sep '13

I have a rather standard oS 12.3 machine. When I reboot, postfix never starts. I see: # rcpostfix status Checking for service Postfix: dead postfix.service - Postfix Mail Transport Agent Loaded: loaded (/usr/lib/systemd/system/postfix.service; enabled) Active: inactive (dead) CGroup: name=systemd:/system/postfix.service Sep 30 10:47:29 acme systemd[1]: Dependency failed for Postfix Mail Transport Agent. I can immediately restart it and it starts fine. So whatever the dependency is has been resolved by the time I log in. How can I find out which dependency failed? -- Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Panasonic camera video
by Dave Howorth 30 Sep '13

30 Sep '13

Does anybody which applications will easily download the videos from a Panasonic TZ35 camera? It stores them in a separate directory structure from the pictures. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Thunderbird and Firefox
by Marc Chamberlin 30 Sep '13

30 Sep '13

I dunno where to start with this question, but since it appears to be Linux oriented, I will ask here and perhaps either get an answer or a pointer to the right place to ask..... Recently I noted that when I click on a link in an email, in my Thunderbird client, it is no longer launching Firefox, or if Firefox is already running it is not bringing up the URL in a new tab like it use to do. I have done some internet searching and applied such suggestions as to set - user_pref("network.protocol-handler.app.ftp", "/usr/bin/firefox"); user_pref("network.protocol-handler.app.http", "/usr/bin/firefox"); user_pref("network.protocol-handler.app.https", "/usr/bin/firefox"); in the prefs.js file for my Thunderbird profile, but still no joy. Anyone have any ideas/pointers on how to get this feature working again? Thanks in advance.. Marc... -- "The Truth is out there" - Spooky -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5