September 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Segfaults in the log
by John Andersen 02 Sep '13

02 Sep '13

After an update of a few modules today, I get a whole bunch of this: > 013-09-02T14:49:12.145135-07:00 poulsbo kernel: [ 170.549546] nepomukindexer[2376]: segfault at 8 ip 00007f622a6cb261 sp 00007fff8490c598 error 4 in libc-2.17.so[7f622a647000+1a3000] > 2013-09-02T14:49:15.498135-07:00 poulsbo kernel: [ 173.902521] nepomukindexer[2381]: segfault at 560 ip 00007f2aa5a6096e sp 00007fffda4fda10 error 4 in libQtGui.so.4.8.5[7f2aa564a000+a6b000] > 2013-09-02T14:49:18.774151-07:00 poulsbo kernel: [ 177.178976] nepomukindexer[2385]: segfault at 8 ip 00007f020d74b261 sp 00007fff5d80ff68 error 4 in libc-2.17.so[7f020d6c7000+1a3000] > 2013-09-02T14:49:22.043141-07:00 poulsbo kernel: [ 180.447747] nepomukindexer[2389]: segfault at 8 ip 00007f913b3ba261 sp 00007fff1b325838 error 4 in libc-2.17.so[7f913b336000+1a3000] > 2013-09-02T14:49:25.238146-07:00 poulsbo kernel: [ 183.642523] nepomukindexer[2393]: segfault at 560 ip 00007f0910fc696e sp 00007fffd787f0f0 error 4 in libQtGui.so.4.8.5[7f0910bb0000+a6b000] > 2013-09-02T14:49:28.583244-07:00 poulsbo kernel: [ 186.987844] nepomukindexer[2397]: segfault at 560 ip 00007f23523da96e sp 00007fff773128f0 error 4 in libQtGui.so.4.8.5[7f2351fc4000+a6b000] > 2013-09-02T14:49:31.902151-07:00 poulsbo kernel: [ 190.306155] nepomukindexer[2401]: segfault at 8 ip 00007f762834d261 sp 00007fffd315fb38 error 4 in libc-2.17.so[7f76282c9000+1a3000] > 2013-09-02T14:49:38.630137-07:00 poulsbo kernel: [ 197.034574] nepomukindexer[2409]: segfault at 560 ip 00007f71d23b096e sp 00007fffe679c3a0 error 4 in libQtGui.so.4.8.5[7f71d1f9a000+a6b000] > 2013-09-02T14:49:41.781137-07:00 poulsbo kernel: [ 200.185714] nepomukindexer[2413]: segfault at 8 ip 00007f68c09cf261 sp 00007fff59090958 error 4 in libc-2.17.so[7f68c094b000+1a3000] > 2013-09-02T14:49:44.949141-07:00 poulsbo kernel: [ 203.353580] nepomukindexer[2418]: segfault at 8 ip 00007f6a26846261 sp 00007fff0ccd3d98 error 4 in libc-2.17.so[7f6a267c2000+1a3000] Anyone know what's up with that. Kid of peggs both CPUs at 100 percent for a while too. -- Explain again the part about rm -rf / -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] HP Dynamic Smart Array B120i SATA Controller and OpenSuSE
by Claudio ML 02 Sep '13

02 Sep '13

Hello all, Anyone have experienced that fake raid controller with OpenSuSE? It works or must be used with software raid? Cordially, Claudio. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

Re: [opensuse] nmbd does not start at boot in openSUSE 12.2-SOLVED
by Istvan Gabor 02 Sep '13

02 Sep '13

2013. augusztus 24. 12:48 napon Andrey Borzenkov <arvidjaar(a)gmail.com> írta: > > What should I do if I wanted to start nmb through the script and not by the boot.local? > > Just like in the sysvinit case, you need to explicitly configure it to > be started during boot. Think of /etc/systemd/system as > of /etc/init.d. Having script there is not enough to make script run > on startup; you also need to link it in proper "run-level". If service > file has correct [Install] section, you can do it using "systemctl > enable nmbd.service" (similar to chkconfig nmbd on). If service file > does not have [Install] section, you can manually link it > into /etc/systemd/system/default.target.wants (or > multi-user.target.wants) so that service is started wherever you boot. > Again, this is exactly the same with sysvinit scripts lacking meta > information for chkconfig - you manually link into > respective /etc/init.d/rc?.d directory. > Andrey, sorry for the late answer. Thanks for your explanation. I looked at the service files and they have [Install] section. I applied systemctl enable: # systemctl enable nmb.service ln -s '/etc/systemd/system/nmb.service' '/etc/systemd/system/multi-user.target.wants/nmb.service' # systemctl enable smb.service ln -s '/etc/systemd/system/smb.service' '/etc/systemd/system/multi-user.target.wants/smb.service' # systemctl enable winbind.service ln -s '/etc/systemd/system/winbind.service' '/etc/systemd/system/multi-user.target.wants/winbind.service' But the service are still not started. # systemctl status nmb.service nmb.service - Samba NMB Daemon Loaded: loaded (/etc/systemd/system/nmb.service; enabled) Active: failed (Result: resources) since Fri, 30 Aug 2013 13:46:41 +0200; 13min ago CGroup: name=systemd:/system/nmb.service # systemctl status smb.service smb.service - Samba SMB Daemon Loaded: loaded (/etc/systemd/system/smb.service; enabled) Active: failed (Result: resources) since Fri, 30 Aug 2013 13:43:19 +0200; 18min ago CGroup: name=systemd:/system/smb.service Aug 30 13:43:18 linux smbd[3765]: [2013/08/30 13:43:18.971776, 0] lib/pidfile.c:118(pidfile_create) # I can't start them manually either: # systemctl start nmb.service Job failed. See system journal and 'systemctl status' for details. # # systemctl start smb.service Job failed. See system journal and 'systemctl status' for details # Here are the contents of service files: # cat /etc/systemd/system/nmb.service [Unit] Description=Samba NMB Daemon After=syslog.target network.target [Service] Type=forking PIDFile=/run/nmbd.pid EnvironmentFile=-/etc/sysconfig/samba ExecStart=/usr/sbin/nmbd $NMBDOPTIONS [Install] WantedBy=multi-user.target # # # cat /etc/systemd/system/smb.service [Unit] Description=Samba SMB Daemon After=syslog.target network.target nmb.service winbind.service [Service] Type=forking PIDFile=/run/smbd.pid LimitNOFILE=16384 EnvironmentFile=-/etc/sysconfig/samba ExecStart=/usr/sbin/smbd $SMBDOPTIONS [Install] WantedBy=multi-user.target Should I edit the service files? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Is it possible to send email with postfix without DNS?
by Carlos E. R. 01 Sep '13

01 Sep '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I want to send email from one local computer to another one, without setting up DNS, but it fails: AmonLanc:~ # mail cer(a)telcontar.valinor Subject: hola texto . EOT AmonLanc:~ # 2013-08-31T19:51:04.530239+02:00 AmonLanc postfix/qmgr[2299]: 5FC09486D2: from=<root(a)AmonLanc.valinor>, size=432, nrcpt=1 (queue active) 2013-08-31T19:51:05.999838+02:00 AmonLanc postfix/smtp[20364]: 5FC09486D2: to=<cer(a)telcontar.valinor>, relay=none, delay=1.7, delays=0.34/0.06/1.3/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=telcontar.valinor type=AAAA: Host not found) The destination address is solvable to ping, but not to "host", because the later uses DNS. So far, my only solution is to implement a DNS server, but I hesitate to do it as this machine has little ram (500M). Some people claimed to make postfix work with only the /etc/hosts file, but it does not work for me. Or perhaps I misunderstood. I have in "/etc/nsswitch.conf": networks: files dns - -- Cheers Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlIiL28ACgkQtTMYHG2NR9U3ZQCgimgDjzlVjsTQiOSCGI0tqmy9 TX8An0/6R1pF97zLvS9k/V/aQ4W3EwyH =fEeH -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 30

[opensuse] bibletime : some library must have changed , after zypper update
by ellanios82 01 Sep '13

01 Sep '13

Hi All - until recently, bibletime-2.9.1-2.1.2.i586 performed correctly but, after an initial high-speed blink of text, the page is blank, not showing any text. - a CLI program 'execute' command, reveals the message : " ERROR: corrupt data during decompression." ................... best regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

Re: [opensuse] Extrange change in "/etc/sysconfig/clock"
by Carlos E. R. 01 Sep '13

01 Sep '13

On 2013-08-31 22:09, James Knott wrote: > Carlos E. R. wrote: >> The cure on those cases was to set the system clock manually, transfer >> contents to cmos clock, and then erase the adjtime file, in the >> knowledge that rebooting would set it up correctly. > > The cure is to not let Windows change the hardware clock. Let Linux do > it, but with the clock set to local time, instead of the usual UTC. Few people know how to forbid Windows to change the "hardware clock". I don't. By the way, if you set the cmos clock to "local", openSUSE will refuse to do the yearly summer/winter change, and other adjustments to the cmos clock (aka bios clock, aka "hardware clock). On the other hand, on windows 7/8 (and vista, I think) it is possible to tell Windows to use the cmos clock as UTC instead of local. This is what I use and since them, I have no problems. But even if you do any of those solutions, the /etc/adjtime file is already corrupted (if you have the hours shift problem on boot). You have to remove it and recreate it again. -- Cheers / Saludos, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar)

3 6

[opensuse] dmraid with phpsysinfo?
by Christopher Myers 01 Sep '13

01 Sep '13

Hey everyone! Just had a quick question - does anyone know if it's possible to query dmraid status via phpsysinfo? I know they have a plugin for mdraid, but didn't see any way to do it (tried to google it a number of different ways with no results.) I'd post to the forums on sourceforge, but apparently they're having issues because I keep getting HTTP 500 errors. This is the output of my dmraid results if it helps any: dmraid -s *** Group superset .ddf1_disks --> Active Subset name : ddf1_DATA size : 488019072 stride : 128 type : mirror status : ok subsets: 0 devs : 2 spares : 0 Thanks much! Chris -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

Re: [opensuse] dmraid with phpsysinfo? [RESOLVED]
by Christopher Myers 01 Sep '13

01 Sep '13

Well, I ended up just writing my own plugin this afternoon, and it's doing what I wanted, so I'm good to go. I'll try to get it passed along to the guys on sourceforge. If anyone else wants it, shoot me an email and I'll pass it along. I know it's not perfect, but it does what I need it to do :) Chris >>> Christopher Myers 08/31/13 10:10 AM >>> Basically, because the array is built with an Adaptec fakeraid "controller," so mdadm doesn't report any info on it: cat /proc/mdstat Personalities : unused devices: mdadm --detail /dev/mapper/ddf1_DATA mdadm: /dev/mapper/ddf1_DATA does not appear to be an md device Chris >>> Andrey Borzenkov 08/31/13 1:07 AM >>> В Fri, 30 Aug 2013 23:26:30 -0500 Christopher Myers пишет: > Hey everyone! > > > Just had a quick question - does anyone know if it's possible to query dmraid status via phpsysinfo? I know they have a plugin for mdraid, but didn't see any way to do it (tried to google it a number of different ways with no results.) > > > I'd post to the forums on sourceforge, but apparently they're having issues because I keep getting HTTP 500 errors. > > > This is the output of my dmraid results if it helps any: > > > dmraid -s > *** Group superset .ddf1_disks > --> Active Subset > name : ddf1_DATA Any reason you use dmraid instead of mdadm for DDF? > size : 488019072 > stride : 128 > type : mirror > status : ok > subsets: 0 > devs : 2 > spares : 0 > > > > > > Thanks much! > Chris > > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0