April 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Disk Drive Technology and partition alignment [WAS: ]Re: 12.3 + ntfs + ext4 + USB3 + different copying speeds
by Greg Freemyer 03 Apr '13

03 Apr '13

Linda Walsh <suse(a)tlinx.org> wrote: >Greg Freemyer wrote: >> >> It is time for you to enter the 21st century in respects to disk >geometry. >---- > Greg, stop showing your ignorance. Ignorant of disk drive tech? Me? I'm open to learn, so let's see where we end up. >The LBA still corresponds to CHS *internally* -- just that the nums are >internal >to each HD. > My statement, which I stand by, is that the CHS value returned by the drive is meaningless in modern rotating drives. Obviously drives still have cylinders, heads, and sectors, they just don't try to relate that geometry via the CHS info that was so important prior to 1995 or so. Further, I state that the S value for sectors per track is not constant for the entire drive. You say there are lots of zones. I'm open to the idea that there are lot of values for S, depending where on the disk you are. Ignoring any zoning effects: Ie. S = int( (PI * D) / L) Where D = diameter L = linear length of a sector I'm open to the idea that a disk drive would have the cylinders grouped into zones of fixed S (sectors / track). I state that S and RPMs drive the transfer rate, so that is why you see different rates for different parts of the drive. Ie. Transfer rate = (RPMs / 60) * S * 512 / 1,000,000 = x MB/sec Hdd drives run at a constant rpm, so the reason for the variation in transfer rate is the variation in S from one zone to another. So for a drive spinning at 7200 rpm and transferring 120 MB/sec for the outer cylinders, that is about 2000 sectors/track. >> >> For at least the last decade the linear density of sectors is >typically constant over the whole platter. Since you know >circumference of a circle is PI * D, a track 3 inches from the center >holds 3x the sectors as one 1 inch from the center. That means number >of sectors per track isn't even a constant for a modern drive. >---- > Wrong. Right! > Modern HD's have been divided into zones for the past >15+years... Zones == collections of cylinders with the same # of sectors/track? If so, we both agree, but I have no idea why you said "wrong". Anyway that means there is a fixed S (sectors/track) for each zone. How can you know what the zones are and what the sectors per track are for any given zone? Without that info you can't attempt to align your partitions, so I'm still at a loss that you say partitions are aligned to tracks in drives made since 1995 or so. >Modern HD's have almost 1 zone/TB, but you can see a most modern >examople at: I guess you meant GB? If a track has 2000 sectors per the above, and a drive has 4 heads then that's 4 MB per cylinder. Thus 1 GB is 250 cylinders. So I guess your saying a zone has roughly 250 cylinders. I have no feedback about that, but it seems reasonable. >http://media.bestofmicro.com/E/N/362111/original/throughput-diagram-wd4001F… > >Latest 4TB HD... That isn't a smooth curve -- Each notch is a zone.. >Across >each zone the >number of sectors is constant. > >Very odd on that graph... notice as some have noted the first 50-100GB >are slightly >lower than just past the 100GB mark -- for READS... writes seem to be >very smooth >but likely due to internal disk buffering... > >> >> Fyi: both modern windows and linux align to 1MB boundaries with no >concern how that aligns with tracks. >---- >Depends on what disk partition tool you use, but I don't know of any >that use MB. Hmmm... I do computer forensics for a living. I see lots of real world drives, but mostly windows. The first partition on most of them starts at sector 63 or 2048. 63 is from partitioning tools that try to align the first partition and believe the lie that the CHS data provides. Windows xp does that. 2048 is what newer computers typically have. They no longer worry about tracks and just align to 1 MB boundaries. Vista and win7 do that. Linux partitioning tools in general got updated a couple years ago to default to MB alignment. My favorite tool for listing partition setups is mmls (it only outputs info since it is a reporting only tool). (Install sleuthkit it you want to use mmls). For my laptop, by chance in Jan I put in a brand new unformatted drive in Jan and then did a full openSUSE 12.2 install. Nothing fancy and I accepted the partition alignment as proposed by the installer: > sudo mmls /dev/sda DOS Partition Table Offset Sector: 0 Units are in 512-byte sectors Slot Start End Length Description 00: Meta 0000000000 0000000000 0000000001 Primary Table (#0) 01: ----- 0000000000 0000002047 0000002048 Unallocated 02: 00:00 0000002048 0004208639 0004206592 Linux Swap / Solaris x86 (0x82) 03: 00:01 0004208640 0012595199 0008386560 Linux (0x83) 04: ----- 0012595200 0046153727 0033558528 Unallocated 05: 00:02 0046153728 0255866879 0209713152 Linux (0x83) 06: ----- 0255866880 0976773167 0720906288 Unallocated Note that mmls shows not only the allocated partitions, but also the unallocated space between partitions. So the the line starting with 02: is the first partition and you can see it starts at sector 2048. Note that 4208640 and 46153728 are also both multiples of 2048, thus all 3 real partitions are 1 MB aligned. Thus it is clear that whatever default openSUSE partitioner is used during install does 1 MB alignment. Now I happen to have a 1.5 TB external drive hooked up. What does mmls show for it: > sudo mmls /dev/sdb root's password: DOS Partition Table Offset Sector: 0 Units are in 512-byte sectors Slot Start End Length Description 00: Meta 0000000000 0000000000 0000000001 Primary Table (#0) 01: ----- 0000000000 0000002047 0000002048 Unallocated 02: 00:00 0000002048 2930272255 2930270208 NTFS (0x07) 03: ----- 2930272256 2930277166 0000004911 Unallocated Now that drive was formatted by Seagate at their factory, and guess what, they too start the first partition at 1 MB. The rest of your email I'm going to ignore because it seems to be about how the tools report partitions, not how they create them. If you want me to test any particular partitioner, just ask. That 1.5 TB external is a scratch drive. I can use dd to wipe the partition table and then use whatever tiool you want to create new partitions. I don't know which have been updated to default to 1 MB alignment, but I hope most have by now. Greg >The default display in fdisk:...sd > Device Boot Start End Blocks Id System >/dev/sdc1 63 25398764 12699351 83 Linux >/dev/sdc2 25398765 42009974 8305605 83 Linux >/dev/sdc3 * 42009975 44130554 1060290 83 Linux >Shows POSIX standard 512 byte sectors. > >parted.. >Number Start End Size Type File system Flags > 1 32.3kB 13.0GB 13.0GB primary xfs type=83 > 2 13.0GB 21.5GB 8505MB primary xfs type=83 > 3 21.5GB 22.6GB 1086MB primary xfs boot, type=83 > 4 22.6GB 146GB 123GB extended type=05 > 5 22.6GB 31.2GB 8595MB logical linux-swap(v1) type=82 > 6 31.2GB 47.3GB 16.1GB logical xfs type=83 > 7 47.3GB 58.0GB 10.7GB logical xfs type=83 > 8 59.1GB 145GB 85.9GB logical type=83 > >Hmm....looks like kB is the lowest unit >well...nope... >(parted) help unit > unit UNIT set the default unit to UNIT > > UNIT is one of: s, B, kB, MB, GB, TB, compact, cyl, chs, %, kiB, MiB, > GiB, TiB >default is 'compact'... > >As for my other two sd's, they both start at 17.4kB -- that's not a 1MB >boundary >either... >it's actually 34 sectors -- I guess thats a gpt size -- >and boot drive is sdc... starting at the 63 sector >Looking at the # blocks/partition and dividing by 2*1024*1024 >(sectors->MB): >fdisk -l /dev/sdc|cut -c41-49|grep -P '^\s*[0-9]+$'|while read secs;do >printf "%10d %s\n" "$secs" "$(pcalc "$secs/(2*1024*1024)"|grep -P '= >\d')" >done > 12699351 = 6.05552244186401 > 8305605 = 3.96042108535767 > 1060290 = 0.505585670471191 > 120278655 = 57.3533320426941 > 8393931 = 4.00253820419312 > 15735636 = 7.50333595275879 > 10490413 = 5.00221872329712 > 83883366 = 39.9987058639526 >---- > >I would say those are track aligned -- That's a 21st century 15K SAS >drive. > >MB alignment?... I don't think even windows is that dumb. >Track alignment is still an issue -- ask anyone running RAID -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] From the April 1st News: Systemd Ditches Gnu C Library for Their own
by Linda Walsh 02 Apr '13

02 Apr '13

Systemd Ditches GNU C Library for Their Own Posted by Unknown Lamer on Mon April 01, 11:25 from the watch-the-world-fork dept. In his typical fashion of replacing perfectly working software with useless broken-by-design crap, our dearest Lennart has decided that the time has come for systemd to gain an email program. He determined that the GNU libc was insufficient for the task of a dbus-enabled cpu hogging email client, leading to the new systemd libc: " Technically, this move makes perfectly sense, too. We are sick of supporting unstable glibc APIs and ABIs, and we believe that we greatly benefit from the fact that we now finally have everything the OS userspace consists of in one single repository. Of course, this new libc is not available to Ubuntu and other Linux distributions that have not yet adopted systemd. However, after deliberately choosing a home-grown display server (Wayland) over the generally accepted one (Mir) we decided creating an incompatible libc would be the best approach to create a strong platform following a strict release cadence." On the bright side "We also renamed the API call creat() to create()..." ---- Well, at least I won't have to worry about incompatible patches in the first release or two... As for the API call -- if only programming editors had spell check built-in back in the 60's.. Above was from slashdot.org...a 'reputable' source...usually... Though in this case...all I can say is this is really gonna screw compat with other apps... ;-| -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] XFdesktop on 12.3
by Wojciech Paszkowski 02 Apr '13

02 Apr '13

Hi all. My XFCE destkop on Dell XPS 1640 dying rendomly with this message in konsole : wojciech@XPS-1640:~> xfdesktop (xfdesktop:5105): GLib-GIO-CRITICAL **: g_file_get_path: assertion `G_IS_FILE (file)' failed (xfdesktop:5105): GLib-GIO-CRITICAL **: g_file_get_path: assertion `G_IS_FILE (file)' failed Fontconfig warning: "/etc/fonts/conf.d/56-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated. xfdesktop: Fatal IO error 11 (Zasoby chwilowo niedostępne) on X server :0. wojciech@XPS-1640:~> xfdesktop (xfdesktop:5770): GLib-GIO-CRITICAL **: g_file_get_path: assertion `G_IS_FILE (file)' failed (xfdesktop:5770): GLib-GIO-CRITICAL **: g_file_get_path: assertion `G_IS_FILE (file)' failed Fontconfig warning: "/etc/fonts/conf.d/56-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated. On same hardware in 12.2 haven't this problem ... -- Pozdrawiam Regards Wojciech Paszkowski SP5RDU loc.KO02ID OpenSUsE user. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

Re: [opensuse] XFdesktop on 12.3
by Wojciech Paszkowski 02 Apr '13

02 Apr '13

-- Treść oryginalnej wiadomości -- Temat: Re: [opensuse] XFdesktop on 12.3 Data: Tue, 02 Apr 2013 19:42:51 +0200 Nadawca: Wojciech Paszkowski <wpaszko(a)tlen.pl> Adresat: opensuse(a)opensuse.org W dniu 02.04.2013 17:30, Carl Hartung pisze: > On Tue, 02 Apr 2013 13:23:16 +0200 > Wojciech Paszkowski wrote: > >> >> Hi all. >> My XFCE destkop on Dell XPS 1640 dying rendomly with this message in >> konsole : >> >> wojciech@XPS-1640:~> xfdesktop >> >> (xfdesktop:5105): GLib-GIO-CRITICAL **: g_file_get_path: assertion >> `G_IS_FILE (file)' failed >> >> (xfdesktop:5105): GLib-GIO-CRITICAL **: g_file_get_path: assertion >> `G_IS_FILE (file)' failed >> Fontconfig warning: "/etc/fonts/conf.d/56-user.conf", line 9: >> reading configurations from ~/.fonts.conf is deprecated. >> xfdesktop: Fatal IO error 11 (Zasoby chwilowo niedostępne) on X >> server :0. >> wojciech@XPS-1640:~> xfdesktop >> >> (xfdesktop:5770): GLib-GIO-CRITICAL **: g_file_get_path: assertion >> `G_IS_FILE (file)' failed >> >> (xfdesktop:5770): GLib-GIO-CRITICAL **: g_file_get_path: assertion >> `G_IS_FILE (file)' failed >> Fontconfig warning: "/etc/fonts/conf.d/56-user.conf", line 9: >> reading configurations from ~/.fonts.conf is deprecated. >> >> On same hardware in 12.2 haven't this problem ... >> > Hi Wojciech, > > Did you do a 'clean' 12.3 install or an in situ upgrade from 12.2? If an > in situ upgrade, you can try creating a new user and logging in as that > user to see if the problem persists. If not, that would be a pretty good > indication that there is leftover 12.2 configuration 'cruff' breaking > your original user space. > > hth & regards, > > Carl Hi Carl. Since SUSE 6.1 I allways do clean install of system , but have separate Home partition. Of course on this laptop had SusE since ver. 11.2 , and still upgrading same way :-). What's more before writing to list , I delete all XFCE config files from user space and problem still persist, On my second PC with Nvidia card I haven't this problem, so I suppose that it connectet with ATI's video card. Checked with new user - bad news xfdesktop crashed ... -- Pozdrawiam Regards Wojciech Paszkowski SP5RDU loc.KO02ID OpenSUsE user. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Re: We have finally reached Windows standards :-)
by Joachim Schrod 02 Apr '13

02 Apr '13

James Knott wrote: > Joachim Schrod wrote: >> If a basic library used in almost all applications is updated >> (recent updates to libxml* or libkrb* come to mind) then you would >> have to restart many many services on your workstation, and also to >> log out and log in back, when X uses them. > > When I do an update with Yast, it automagically restarts the > affected services, if needed. Is this really so? If a library that's used by your X server is updated (recently: the Kerberos library), is the X server restarted? I.e., are all users forcefully logged out, loosing all their work with all open applications? I don't use YaST, I use zypper for updates, it's automated in our infrastructure. zypper didn't restart X, and I thank the openSUSE devs that it didn't do so. I don't like loosing my work... ;-) And, frankly, I doubt that YaST will behave different and will restart my X server during update for that reason. (There were several of these shared lib updates over the last few months, btw.) There would be a some messages here on the mailing list asking why one has been forcefully logged out, otherwise; thus my doubts are grounded in empirical observable facts, and are not only personal musings. Have you assured yourself, after your YaST update, with "zypper ps", that no program uses still any of the updated libraries? Honestly, I doubt that you did so. That you're writing about doing updates with YaST without any reference to zypper shows it. If you didn't check shared library usage, and if YaST didn't restart X, you left yourself running a server with publically known exploits. Did you do your risk management properly? What will you answer to any questions from a SOX auditor? I know what I did and what I'll be able to answer... Cheersm Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod, Roedermark, Germany Email: jschrod(a)acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Firewall-zone question
by Koenraad Lelong 02 Apr '13

02 Apr '13

Hi, I'm configuring new laptops for my daughters. They're almost ready (except for a dvd-problem, see a thread in this list), but I'm uncertain which firewall-zone I have to put the NIC's in. On my own laptops I put all NIC's in internal zone, but is this safe ? I think mostly it will be, except for hotspots and the like. And on my machine I don't have services running (I chould check though ;-) ), but I don't know what my "customers" will need in the future, and where they will be online. What's your opinion ? Regards, Koenraad Lelong AE electronics -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Re: We have finally reached Windows standards :-)
by Joachim Schrod 02 Apr '13

02 Apr '13

Patrick Shanahan wrote: > * Carlos E. R. <robin.listas(a)telefonica.net> [03-31-13 19:52]: > [...] >> But it is far simpler and even faster to say "reboot". Covers all cases >;-) >> >> >> Common, restarting services with systemd needs a book, with all those long >> commands to type! :-p > > Shhhh, it's still a secret but I don't know of any services I have used > that cannot still be restarted using: rc<service-name> restart If a basic library used in almost all applications is updated (recent updates to libxml* or libkrb* come to mind) then you would have to restart many many services on your workstation, and also to log out and log in back, when X uses them. Then it's less work, and also faster, to reboot... Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod, Roedermark, Germany Email: jschrod(a)acm.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] How to send executable script ?
by Dsant 01 Apr '13

01 Apr '13

I would like to send a script by email to clients. But they would not know to use terminal or chmod. If they would just have to double clic on file, it would be perfect. Could be under KDE3, KDE4 or Gnome. When they have saved the file on local disk, how to make it run ? By default, the file is opened by the text editor... -> I can easily customize the script -> I can ask clients to do anything by phone :) well, not to complicated. Any trick ? Dsant -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 6

[opensuse] Failed disk? Which one?
by Vojtěch Zeisek 01 Apr '13

01 Apr '13

Hello, openSUSE experts, recently I have got unpleasant news from logs: end_device-0:10: mptsas: ioc0: removing sata device: fw_channel 0, fw_id 4, phy 3,sas_addr 0x922210b547a6049 [...] end_device-0:63: mptsas: ioc0: removing sata device: fw_channel 0, fw_id 4, phy 3,sas_addr 0x922210b547a6049 phy-0:3: mptsas: ioc0: delete phy 3, phy-obj (0xffff880272981c00) port-0:10: mptsas: ioc0: delete port 10, sas_addr (0x922210b547a6049) [...] port-0:63: mptsas: ioc0: delete port 63, sas_addr (0x922210b547a6049) audit: audit_backlog=326 > audit_backlog_limit=320 audit: audit_backlog=327 > audit_backlog_limit=320 audit: audit_lost=189 audit_rate_limit=0 audit_backlog_limit=320 [...] audit: audit_lost=423 audit_rate_limit=0 audit_backlog_limit=320 audit: backlog limit exceeded audit_log_start: 32 callbacks suppressed audit_log_start: 671 callbacks suppressed mptbase: ioc0: PhysDisk is now failed, out of sync mptbase: ioc0: PhysDisk is now missing, out of sync mptbase: ioc0: PhysDisk is now online, out of sync mptbase: ioc0: SMART data received, ASC/ASCQ = 5dh/10h mptbase: ioc0: volume is now degraded, enabled mptbase: ioc0: volume is now degraded, enabled, resync in progress mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=4 mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0 mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 4, phy 3, sas_addr 0x922210b547a6049 scsi 0:0:11:0: Attached scsi generic sg3 type 0 scsi 0:0:11:0: Direct-Access ATA ST3500320NS SN05 PQ: 0 ANSI: 5 [...] scsi 0:0:64:0: Attached scsi generic sg3 type 0 scsi 0:0:64:0: Direct-Access ATA ST3500320NS SN05 PQ: 0 ANSI: 5 scsi target0:0:10: mptsas: ioc0: delete device: fw_channel 0, fw_id 4, phy 3, sas_addr 0x922210b547a6049 [...] scsi target0:0:63: mptsas: ioc0: delete device: fw_channel 0, fw_id 4, phy 3, sas_addr 0x922210b547a6049 Once, I had to hard reset it because of kernel panic during RAID syncing error. It is tower server IBM X3200 M3 with 4 x 500 GB hot-swap HDD http://www-03.ibm.com/systems/x/hardware/tower/x3200m3/ It serves as LAMP and SFTP. I used built-in SAS utility to create HW RAID 10 which openSUSE 12.2 sees as one disk. If it is important, it has UEFI, but I use legacy BIOS mode (and GRUB 1). I don't have so much experience with such HW, so I rather ask before taking action. It is still running. ;-) So am I correct, that one disc is dying? How to recognize which one? And can I really just open running machine the case, exchange HDD and wait little bit? ;-) Have a nice day, Vojtěch -- Vojtěch Zeisek Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux http://www.opensuse.org/ http://trapa.cz/

4 8

[opensuse] Problem playing DVD
by Koenraad Lelong 01 Apr '13

01 Apr '13

Hi, I recently installed OS12.3 on a new laptop. Most things are OK, espescially since I installed the AMD-video driver. Unfortunately, I can't play DVD's. I followed the wiki about restricted formats and installed the needed rpm's. When I try to start kaffeine, even without a DVD in the drive it crashes : julie@julie:~>kaffeine julie@julie:~> "/org/freedesktop/UDisks2/drives/INTEL_SSDMAEXC024G3H_CVHA242300QP024D" : property "Drive" does not exist "/org/freedesktop/UDisks2/drives/hp______BD_CMB_UJ160_HN32_058445" : property "Drive" does not exist "/org/freedesktop/UDisks2/drives/ST9750420AS_6WS2TVCH" : property "Drive" does not exist "/org/freedesktop/UDisks2/drives/INTEL_SSDMAEXC024G3H_CVHA242300QP024D" : property "DeviceNumber" does not exist "/org/freedesktop/UDisks2/drives/INTEL_SSDMAEXC024G3H_CVHA242300QP024D" : property "Device" does not exist "/org/freedesktop/UDisks2/drives/ST9750420AS_6WS2TVCH" : property "DeviceNumber" does not exist "/org/freedesktop/UDisks2/drives/ST9750420AS_6WS2TVCH" : property "Device" does not exist KCrash: Application 'kaffeine-xbu' crashing... KCrash: Attempting to start /usr/lib64/kde4/libexec/drkonqi from kdeinit sock_file=/home/julie/.kde4/socket-julie.site/kdeinit4__1 kaffeine seems started but but does not do anything. So I installed vlc, but there I also have problems : vlc VLC media player 2.0.5 Twoflower (revision 2.0.5-0-g1661b7d) [0x208fd58] main interface error: no suitable interface module [0x20610a8] main libvlc error: interface "globalhotkeys,none" initialization failed [0x20610a8] main libvlc: Start vlc met standaardinterface. Gebruik 'cvlc' om vlc zonder interface te gebruiken. libdvdnav: Using dvdnav version 4.2.0 libdvdread: Using libdvdcss version 1.2.12 for DVD access libdvdnav: DVD Title: MULAN2000 libdvdnav: DVD Serial Number: 29115AE1 libdvdnav: DVD Title (Alternative): MULAN2000 libdvdnav: Unable to find map file '/home/julie/.dvdnav/MULAN2000.map' libdvdnav: DVD disk reports itself with Region mask 0x00000000. Regions: 1 2 3 4 5 6 7 8 libdvdread: Attempting to retrieve all CSS keys libdvdread: This can take a _long_ time, please be patient libdvdread: Get key for /VIDEO_TS/VIDEO_TS.VOB at 0x00000132 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x00000548 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_02_1.VOB at 0x0012301b libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_03_1.VOB at 0x00225ed3 libdvdread: Elapsed time 0 libdvdread: Found 3 VTS's libdvdread: Elapsed time 0 [0x7fb5cc000b98] main input error: ES_OUT_RESET_PCR called [0x7fb5cc000b98] main input error: ES_OUT_RESET_PCR called [0x7fb5a8001268] xcb_xv vout display error: no available XVideo adaptor Segmentatiefout Any suggestions what to do next ? Regards, Koenraad Lelong. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 14