April 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Konversation channel search feature
by General mail 05 Apr '13

05 Apr '13

hello, IIRC, Konversation had a channel search feature but I can't seem to find it. I like to search for channels by topic, amount channel members, etc. Sincerely -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] no console login after 12.1 to 12.3 dist-upgrade
by Darin Perusich 04 Apr '13

04 Apr '13

Hello, I just dup'd two of my 12.1 vmware systems to 12.3 and the upgrade appeared to complete successfully. However after rebooting the systems I can no longer access the system console, the only thing on the console is the message "piix4_smbus 0000:00:07.3 host smbus controller not enabled" which is an informational message. If I boot the system and remove vga=0x314 from the command line I see the starting status of the services until it reaches "Reached target Multi-User." at which point to all I can to is shift+pgUp or pgDown. The only failed service to start is plymouth-start.service which is documented in Bug 780976, yet looks like it's made a reappearance again unless something else is causing it. agetty is running and I've killed it and it's restarted by systemd but still no login prompt. Does anyone have any insight it what's causing this and how to resolve it? I've yet to file a bug for this but it's coming. -- Later, Darin -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] LibreOffice 4
by James Knott 04 Apr '13

04 Apr '13

I see LibreOffice 4 is now available from www.libreoffice.org. There is an RPM available from that site. Is there an openSUSE package available yet? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 14

Re: [opensuse] Searching for string in many files [Was: 12.3 + ntfs + ext4 + USB3 + different copying speeds]
by Per Jessen 04 Apr '13

04 Apr '13

Bernhard Voelker wrote: > On 04/04/2013 12:54 PM, Per Jessen wrote: >> You have deliberately prolonged the agony by adding '-n 1' to xargs - >> that means xargs will fork 'echo' once per filename. >> >> Try this: >> >> xargs -0 printf "%s\n" <listadeficheros | wc -l > > or even better: > > $ tr '\0' '\n' < listadeficheros | wc -l Yup, much better. > Isn't it cool to have so many choices? ;-) +1 -- Per Jessen, Zürich (7.2°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] gma500 video and frame buffer
by Ruben Safir 03 Apr '13

03 Apr '13

Hello I have a fit/PC which has a Intel GMA500 Poulsbo video chip in it. It doesn't function correctly as can be seen in this bug report http://lists.opensuse.org/opensuse-bugs/2013-03/msg04778.html The device is connected to a DVI connected screen and everything is scrunched up into the upper left hand corner of the screen. I think it is running through the VESA frame buffer? The device is running on an updated openSuSE 12.2. I managed to get the system to not run through the frame buffer, giving me full console at least, not no X capability. Since I've been using it as a server, that has been fine. But know after the latest upgrade, the boot screen has changed and the viewport is squashed into the corner again. The chips worked with openSuSE 11.3, so I don't even know how it is now working, but please, it is possible, let me know if there is a kernel driver i can install to make it work with X11 properly, or get rid of the frame buffer permanently this time. Ruben PS - Reference: http://lizards.opensuse.org/2011/04/12/intel-gma500-poulsbo-drivers-and-ope… http://lists.opensuse.org/opensuse-bugs/2013-03/msg04778.html hwinfo output: hid 81709 1 usbhid, Live 0xf81c5000 uhci_hcd 35656 0 - Live 0xf815f000 poulsbo 12553 0 - Live 0xf8115000 ehci_hcd 59456 0 - Live 0xf832b000 usbcore 194042 4 usbhid,uhci_hcd,ehci_hcd, Live 0xf8194000 usb_common 12526 1 usbcore, Live 0xf8110000 gma500_gfx 138256 1 - Live 0xf80ed000 drm_kms_helper 45454 1 gma500_gfx, Live 0xf80e0000 drm 232083 2 gma500_gfx,drm_kms_helper, Live 0xf811a000 i2c_algo_bit 13198 1 gma500_gfx, Live 0xf809a000 i2c_core 33926 5 i2c_isch,gma500_gfx,drm_kms_helper,drm,i2c_algo_bit, Live 0xf80c8000 thermal 18231 0 - Live 0xf80be000 video 18889 1 poulsbo, Live 0xf80a3000 processor 43535 1 acpi_cpufreq, Live 0xf80b2000 thermal_sys 19936 3 thermal,video,processor, Live 0xf8027000 hwmon 12912 2 coretemp,thermal_sys, Live 0xf8091000 ... 12: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.DlGhUSFiV2D SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel System Controller Hub (SCH Poulsbo) Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x8108 "System Controller Hub (SCH Poulsbo) Graphics Controller" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x8119 Revision: 0x07 Driver: "gma500" Driver Modules: "drm" Memory Range: 0xd0080000-0xd00fffff (rw,non-prefetchable) I/O Ports: 0x1800-0x1807 (rw) Memory Range: 0xc0000000-0xcfffffff (rw,non-prefetchable) Memory Range: 0xd0040000-0xd007ffff (rw,non-prefetchable) IRQ: 16 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00008108sv00008086sd00008119bc03sc00i00" Driver Info #0: Driver Status: gma500_gfx is active Driver Activation Cmd: "modprobe gma500_gfx" Driver Info #1: Driver Status: poulsbo is active Driver Activation Cmd: "modprobe poulsbo" Config Status: cfg=no, avail=yes, need=no, active=unknown -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Install 12.3 0n Emachine
by A. den Oudsten 03 Apr '13

03 Apr '13

My desktop is an Acer emachine AMD Athlon (tm) II 160 u processor 800,00 MHz x86_64 nVidia Corporation GeForge nForge 430, 2D drive nouveau, 3D drive nouveau Gallium(7.11) RAM 1.7 GiB, Free memory 998.6 MiB (+306,5 MiB Caches), Free swap 2.0 GiB I installed 12.2 and when I started up I got green diagonal lines on the screen. When I started fail safe, no problems. After installing 12.3 the same, but there was no fail safe mode. Re-installing and Resque gave no solution. KDE Live disk resulted in the same diagonal lines, but with various colours!! and no fail safe!! I was a little bit surprised. Any ideas how to solve this? Thanks André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Unexpected dual IP-addresses on NIC
by Koenraad Lelong 03 Apr '13

03 Apr '13

Hi, At home, I recently started seeing two ip-adresses on different /24-subnets on the NIC's of my laptop, running OS12.2. To be more precise, "ifconfig" shows one ip-address, the expected address : 192.168.185.x, but "ip address show" shows two ip-addresses, 192.168.185.x and 192.168.1.y. "route" shows two routes for each NIC, just as "ip route show" does. The laptop is a dual-boot with ubuntu 10.04 and there I don't have this. I looked in the network-settings of yast, but I can't find anything problematic. I have been experimenting with a router that hands out addresses in the 192.168.1.x-range, but they never were present on the same network. And the lease-time of the router is less than a day. And it's not been active for more than a week now. Where could I look to get rid of that second address ? Thanks, Koenraad Lelong -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] DLNA video problem
by lynn 03 Apr '13

03 Apr '13

12.3, minidlna streaming to WD TV live /etc/mindlna.conf ... media_dir=V,/home/lynn/Videos ... Hi Certain videos, usually .mp4's, sometimes don't appear on the client. They can sometimes be made to appear by restarting the server and client (a pain). I think that this is an openSUSE or minidlna issue since I can transfer the same .mp4 to my Android tablet and DNLA it from there where it _always_ appears. I observe the same behaviour with the firewall turned off. I've checked the file and folder permissions and they're all lynn:users. The logs seem fine: [2013/04/01 10:19:15] minidlna.c:884: warn: Starting MiniDLNA version 1 .0.25 [SQLite 3.7.14.1]. [2013/04/01 10:19:15] minidlna.c:990: warn: HTTP listening on port 8200 and photos and mp3's always appear without fail. Any dlna users? Thanks, L, x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 12

[opensuse] False positives about trojans in libreoffice-3.4.5.5-4.5.1.src.rpm
by Peter Maffter 03 Apr '13

03 Apr '13

I just had some shock after downloading updates for SuSE. There are viruses in libreoffice-3.4.5.5-4.5.1.src.rpm ! Rechecked, downloaded from http://download.opensuse.org/update/12.1/src/ checked again and so on. Can someone please add a warning to this file in the repositories pointing to the posting at http://lists.freedesktop.org/archives/libreoffice/2011-September/018749.html ? Would have saved me some time. ;-) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] Process in disk sleep state
by Martin Zhang 03 Apr '13

03 Apr '13

Hi, when process in disk sleep sate, i can not do any other work, even shutting down the machine, is it a bug? it is horrible experience to my first using Suse. Could anyone help? :( -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0