February 2010 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Slow network initialization on boot up
by Marc Chamberlin 27 Feb '10

27 Feb '10

I recently upgraded one of my servers to SuSE11.2 x86-64 arch and I am noticing that the network initialization seems to be happening sometime after the boot up process is complete. This is breaking the startup of a number of other services such a my Bacula backup and James email servers, though others such as Tomcat6 seem to survive it ok. I might also guess that this is breaking the automount of some of the directories from other computers on my internal network. One of the symptoms (smoking gun?) is that right after the boot up is complete and the KDE gui has come up, I cannot ping any of the other computers on my internal network for awhile. A few minutes after startup, then the pings will begin to work but until then I get an unknown host error which surprises me because all my hosts are defined in the /etc/hosts file.. Same goes for the automount, it fails during boot up, and if I do a mount -a too soon, after boot up it still fails, but if I wait a few minutes, do a mount -a, then it works.. Doing an rcnetwork status right after the KDE gui comes up clearly shows that eth1 has failed to initialize - bigbang:/etc # rcnetwork status Checking optional network interfaces: eth0 device: Intel Corporation 82573V Gigabit Ethernet Controller (Copper) (rev 03) eth0 IP address: 206.58.200.12/24 eth0 running eth1 device: Accton Technology Corporation SMC2-1211TX (rev 10) eth1 is down eth1 dead Checking mandatory network interfaces: lo lo IP address: 127.0.0.1/8 secondary lo IP address: 127.0.0.2/8 lo running Checking service network . . . . . . . . . . . running Looking at the messages log file, I think it is trying to tell me something, but I dunno what. At least here is a portion that I think is interesting - Feb 23 10:50:11 bigbang ifup: lo Feb 23 10:50:11 bigbang ifup: lo Feb 23 10:50:11 bigbang ifup: IP address: 127.0.0.1/8 Feb 23 10:50:11 bigbang ifup: Feb 23 10:50:11 bigbang ifup: Feb 23 10:50:11 bigbang ifup: IP address: 127.0.0.2/8 Feb 23 10:50:11 bigbang ifup: Feb 23 10:50:11 bigbang ifup: eth0 device: Intel Corporation 82573V Gigabit Ethernet Controller (Copper) (rev 03) Feb 23 10:50:15 bigbang kernel: [ 28.732592] e1000e 0000:04:00.0: irq 28 for MSI/MSI-X Feb 23 10:50:15 bigbang kernel: [ 28.783221] e1000e 0000:04:00.0: irq 28 for MSI/MSI-X Feb 23 10:50:15 bigbang kernel: [ 28.784009] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 23 10:50:15 bigbang ifup: eth0 Feb 23 10:50:15 bigbang ifup: IP address: 206.58.200.12/24 Feb 23 10:50:15 bigbang ifup: Feb 23 10:50:15 bigbang nmbd[1999]: [2010/02/23 10:50:15, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:15 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:15 bigbang nmbd[1999]: [2010/02/23 10:50:15, 0] nmbd/nmbd_subnetdb.c:206(create_subnets) Feb 23 10:50:15 bigbang nmbd[1999]: create_subnets: No local IPv4 non-loopback interfaces ! Feb 23 10:50:15 bigbang nmbd[1999]: [2010/02/23 10:50:15, 0] nmbd/nmbd_subnetdb.c:207(create_subnets) Feb 23 10:50:15 bigbang nmbd[1999]: create_subnets: Waiting for an interface to appear ... Feb 23 10:50:16 bigbang kernel: [ 30.447544] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None Feb 23 10:50:16 bigbang kernel: [ 30.447555] 0000:04:00.0: eth0: 10/100 speed: disabling TSO Feb 23 10:50:16 bigbang kernel: [ 30.447961] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 23 10:50:17 bigbang checkproc: checkproc: can not get session id for process 2120! Feb 23 10:50:20 bigbang nmbd[1999]: [2010/02/23 10:50:20, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:20 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:20 bigbang kernel: [ 34.329109] CPU0 attaching NULL sched-domain. Feb 23 10:50:20 bigbang kernel: [ 34.329118] CPU1 attaching NULL sched-domain. Feb 23 10:50:20 bigbang kernel: [ 34.332231] CPU0 attaching sched-domain: Feb 23 10:50:20 bigbang kernel: [ 34.332236] domain 0: span 0-1 level CPU Feb 23 10:50:20 bigbang kernel: [ 34.332240] groups: 0 1 Feb 23 10:50:20 bigbang kernel: [ 34.332249] CPU1 attaching sched-domain: Feb 23 10:50:20 bigbang kernel: [ 34.332252] domain 0: span 0-1 level CPU Feb 23 10:50:20 bigbang kernel: [ 34.332256] groups: 1 0 Feb 23 10:50:25 bigbang nmbd[1999]: [2010/02/23 10:50:25, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:25 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:27 bigbang kernel: [ 41.033007] eth0: no IPv6 routers present Feb 23 10:50:30 bigbang nmbd[1999]: [2010/02/23 10:50:30, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:30 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:35 bigbang nmbd[1999]: [2010/02/23 10:50:35, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:35 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:39 bigbang gnome-keyring-daemon[2360]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files Feb 23 10:50:40 bigbang nmbd[1999]: [2010/02/23 10:50:40, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:40 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:41 bigbang gnome-keyring-ask: could not grab keyboard: 3 Feb 23 10:50:45 bigbang python: hp-systray[2434]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting. Feb 23 10:50:45 bigbang nmbd[1999]: [2010/02/23 10:50:45, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:45 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:50 bigbang nmbd[1999]: [2010/02/23 10:50:50, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:50 bigbang nmbd[1999]: WARNING: no network interfaces found Feb 23 10:50:55 bigbang nmbd[1999]: [2010/02/23 10:50:55, 0] lib/interface.c:550(load_interfaces) Feb 23 10:50:55 bigbang nmbd[1999]: WARNING: no network interfaces found .... A whole slew of these last two messages occur here... interspersed with the following a few times - Feb 23 10:51:25 bigbang kernel: [ 98.649885] type=1503 audit(1266951085.164:13): operation="open" pid=2589 parent=2310 profile="/bin/ping" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/srv/etc/hosts" and then this - Feb 23 10:56:34 bigbang kernel: [ 407.494160] CIFS VFS: Error connecting to socket. Aborting operation Feb 23 10:56:34 bigbang kernel: [ 407.494181] CIFS VFS: cifs_mount failed w/return code = -110 Feb 23 10:56:34 bigbang SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit. Feb 23 10:56:34 bigbang ifup: eth1 device: Accton Technology Corporation SMC2-1211TX (rev 10) Feb 23 10:56:34 bigbang kernel: [ 407.763273] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 Feb 23 10:56:34 bigbang ifup: eth1 Feb 23 10:56:34 bigbang ifup: IP address: 192.168.2.100/24 Feb 23 10:56:34 bigbang ifup: Feb 23 10:56:44 bigbang kernel: [ 417.813131] eth1: no IPv6 routers present Feb 23 10:56:49 bigbang kernel: [ 423.136027] CIFS VFS: No response to cmd 115 mid 2 Feb 23 10:56:49 bigbang kernel: [ 423.136050] CIFS VFS: Send error in SessSetup = -11 Feb 23 10:56:49 bigbang kernel: [ 423.136072] CIFS VFS: cifs_mount failed w/return code = -11 Feb 23 10:56:49 bigbang SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit. Looking in boot.msg I also see what appears to be a switch in assignments for eth0 and eth1 taking place. But again I don't know if this is relevant or not... 6>[ 8.198726] eth0: RealTek RTL8139 at 0xffffc90005318e00, 00:e0:29:70:57:84, IRQ 22 <6>[ 8.211317] parport_pc 00:08: reported by Plug and Play ACPI <6>[ 8.211379] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] <4>[ 8.222837] e1000e 0000:04:00.0: Warning: detected DSPD enabled in EEPROM <6>[ 8.273835] 0000:04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:13:20:7a:8a:fb <6>[ 8.273841] 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection <6>[ 8.274025] 0000:04:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff <4>[ 8.274072] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray <6>[ 8.274077] Uniform CD-ROM driver Revision: 3.20 <7>[ 8.274232] sr 2:0:1:0: Attached scsi CD-ROM sr0 <6>[ 8.360572] ppdev: user-space parallel port driver <6>[ 8.368061] eth0 renamed to eth0_rename by udevd [378] <6>[ 8.370914] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <7>[ 8.370976] HDA Intel 0000:00:1b.0: setting latency timer to 64 <6>[ 8.407975] eth1 renamed to eth0 by udevd [374] <6>[ 8.409008] udev: renamed network interface eth1 to eth0 <6>[ 8.416287] iTCO_vendor_support: vendor-support=0 <6>[ 8.417943] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 <6>[ 8.418080] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) <6>[ 8.418158] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <6>[ 8.423031] eth0_rename renamed to eth1 by udevd [378] <6>[ 8.423991] udev: renamed network interface eth0_rename to eth1 (Sorry about the formatting, I got a new version of Thunderbird as well and it seems to be having all sorts of troubles with formatting at the moment.. sigh) I use the traditional ifup and ifdown methods, since in the past that was the only way to have the network initialize and ready in time for the startup of other services. KNetworkManager would always wait until after the boot process was completed and again that would break the startup of some of my other services. And like I said earlier, if I wait a few minutes, then eth1 seems to magically heal itself and doing an rcnetwork status will show it is up and running just fine. I don't do anything else in the meantime, just wait.... Any ideas on what I might be doing wrong and/or how to fix? Thanks in advance for any help/advice offered... Marc Chamberlin -- Marc Chamberlin www.marcchamberlin.com A man said unto the universe - "Sir I Exist!" "However" replied the universe "I do not see where that creates in me a sense of an obligation" S Crane.

3 2

[opensuse] 11.0 OpenOffice 3.2 build 9319 - Can't Change Toolbar Icons in Options -> View [again...]
by David C. Rankin 27 Feb '10

27 Feb '10

Peter, All, Opensuse 11.0 with 00 3.2.0 OOO320m21 (Build 9319) [1], the icons are stuck on high-contrast with no way to change them. Changing the icon set in Tools -> Options -> View has no effect. This is the icon set I'm stuck with: http://www.3111skyline.com/download/bugs/oo/images/oo-cant-change-icons.jpg This has happened before so this is most likely a regression in OO or in my setup, but I can't recall what the fix was. Looking in the same screenshot directory, I still have the screenshot from Nov. 10, 2009 when we last went through this: http://www.3111skyline.com/download/bugs/oo/images/ooicons-stuck.jpg IIRC it had something to do with the directory that the normal icon sets versus the preformatted set that comes in a separate rpm. The set of packages I have installed now is: 15:26 alchemy:~/dt/fluxbox/tenrstyles> rpm -qa | grep OpenOffice | sort OpenOffice_org-3.2.0.7-1.1 OpenOffice_org-base-3.2.0.7-1.1 OpenOffice_org-branding-openSUSE-2.4-17.1 OpenOffice_org-branding-upstream-3.2.0.7-1.1 OpenOffice_org-calc-3.2.0.7-1.1 OpenOffice_org-components-3.2.0.7-1.1 OpenOffice_org-converter-3.0-3.1 OpenOffice_org-draw-3.2.0.7-1.1 OpenOffice_org-filters-3.2.0.7-1.1 OpenOffice_org-filters-optional-3.2.0.7-1.1 OpenOffice_org-help-en-US-3.2.0.7-1.1 OpenOffice_org-hyphen-20080929-38.1 OpenOffice_org-icon-themes-3.2.0.7-1.1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^ OpenOffice_org-impress-3.2.0.7-1.1 OpenOffice_org-l10n-extras-3.2.0.7-1.1 OpenOffice_org-LanguageTool-1.0.0-1.3 OpenOffice_org-LanguageTool-en-1.0.0-1.3 OpenOffice_org-libs-core-3.2.0.7-1.1 OpenOffice_org-libs-extern-3.2.0.7-1.1 OpenOffice_org-libs-gui-3.2.0.7-1.1 OpenOffice_org-mailmerge-3.2.0.7-1.1 OpenOffice_org-math-3.2.0.7-1.1 OpenOffice_org-officebean-3.2.0.7-1.1 OpenOffice_org-openclipart-3-4.2 OpenOffice_org-pyuno-3.2.0.7-1.1 OpenOffice_org-templates-en-3.0-2.1 OpenOffice_org-templates-labels-a4-1.0-11.1 OpenOffice_org-templates-labels-letter-1.0-11.1 OpenOffice_org-templates-presentation-layouts-3.0-2.1 OpenOffice_org-thesaurus-en-20060111-55.1 OpenOffice_org-ure-3.2.0.7-1.1 OpenOffice_org-writer-3.2.0.7-1.1 OpenOffice_org-writer-extensions-3.2.0.7-1.1 My "guess" is that there is a problem with a directory or a directory setting in the icon-themes package. I don't seem to be able to find the archives hosing the past discussion, so please help me remember what I've forgotten :p Peter, let me know if you want me to send anything else. Thanks. Footnotes: [1] [ all build information was "hand copied" because some ignoramus screwed up the 'About' dialog to prevent copying the build info. This is ridiculous, this is 2010 damnit. I shouldn't have to retype anything that is looking at me on the screen. All this gee-whiz cutsie crap with about dialogs and non-copyable text has got to stop. It breaks functionality and it deters people from filing bug reports etc.. when they figure out they have to retype lengthy information just to report it. Any visible text produced by any program should be copyable -- period. Next time I'll let you know how I really feel about the subject. ] -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] kde3 - All Apps in Menu & Control Panel -- Gone :( How to find again ??)
by David C. Rankin 27 Feb '10

27 Feb '10

Listmates, This is a good one. In KDE3 for all users all of the apps vanished from the main menu (suse or classic) for ALL users and ALL kcmshell modules (control panel apps) vanished from the control panel after update yesterday. How do I go about finding my wayward apps and modules? I recall a similar discussion right at 11.2 release, but then the problem went away. I can't find the magic solution. Will, Dontan, what's the trick? It looks like the menus are physically there: 05:54 alchemy:~> l .config/menus/ total 28 drwx------ 2 david dcr 4096 2010-02-24 22:20 ./ drwxr-xr-x 34 david dcr 4096 2010-02-24 13:32 ../ -rw-r--r-- 1 david dcr 10393 2010-02-14 02:11 applications-kmenuedit.menu -rw-r--r-- 1 david dcr 1496 2010-02-24 22:23 applications.menu -rw-r--r-- 1 david dcr 243 2010-02-24 22:23 preferences.menu You can still access the control panel modules by name, but they are not listed as modules anymore: 10:17 alchemy:~> kcmshell --list The following modules are available: but the following works just fine: 10:18 alchemy:~> kcmshell colors http://www.3111skyline.com/download/bugs/kde4/ So all app menu entries are gone and all control panel modules are not shown in the control panel, but all are still there. What say the smart guys on this one??? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] I can't get at YAST!
by Anton Aylward 27 Feb '10

27 Feb '10

I boot this morning and I seem to have problems .. Now, running "kdesu yast" in an xterm produces what seems to be nothing, until I run "ps -ef" and see anton 17146 15722 0 07:29 ? 00:00:00 /usr/lib/kde4/libexec/kdesud root 17149 17146 0 07:29 pts/8 00:00:00 /bin/su root -c /usr/lib/kde4/libexec/kdesu_stub - root 17151 17149 0 07:29 pts/8 00:00:00 /usr/lib/kde4/libexec/kdesu_stub root 17152 17151 0 07:29 ? 00:00:00 /bin/bash /sbin/yast root 17193 17152 8 07:29 ? 00:00:02 /usr/lib/YaST2/bin/y2base menu ncurses That doesn't look right. Why is this happening of a sudden? I'm sure someone is gong to suggest I try "yast2", so I did. No luck with that either: $ kdesu yast2 kdesu(15681)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/process.cpp : 295 ] Running "/bin/su" kdesu(15681)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/su.cpp : 259 ] Read line "Password: " kdesu(15681)/kdesu (kdelibs) KDESu::KDESuPrivate::KCookie::getXCookie: No X authentication info set for display ":0" QProcess: Destroyed while process is still running. kdesu(15681)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/process.cpp : 295 ] Running "/bin/su" kdesu(15681)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/su.cpp : 259 ] Read line "Password: " kdesu(15681)/kdesu (kdelibs) KDESu::PtyProcess::WaitSlave: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/process.cpp : 381 ] Child pid 15803 kdesu(15681)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/su.cpp : 259 ] Read line "" kdesu(15681)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /usr/src/packages/BUILD/kdelibs-4.4.0/kdesu/su.cpp : 259 ] Read line "kdesu_stub" No cookie? That's never happened before. What changed/? I upgraded to 11.2 two days ago, but I've used yast successfully since then. -- Misspeled? Imposable. My modem is erorr corecting. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

Re: [opensuse] dns too slow?
by Leen de Braal 27 Feb '10

27 Feb '10

> On Sat, Feb 27, 2010 at 3:28 AM, Leen de Braal <ldb(a)braha.nl> wrote: >> ........... major snip ............. >> I see in YaST that unscd is installed on the 11.2 server, but I do not >> see >> a process. Neither is there a man-page for unscd. >> Does it need some configuration? > > I still feel you need to ensure that there are no network bottle necks > choking the packets to the root servers from your DNS servers. You might be right. This is an ADSL connection on quite a long distance. > > On my OS11.2 (x86_64) the process is nscd. and the script is > /etc/init.d/nscd. Turn it on with chkconfig. That one is running, but it already did. > > HTH > -- Arun Khan > -- L. de Braal BraHa Systems NL - Terneuzen T +31 115 649333 F +31 115 649444 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] openSUSE Weekly News 112 is out!
by Sascha 'saigkill' Manns 27 Feb '10

27 Feb '10

We are pleased to announce: Issue 112 of openSUSE Weekly News is out! [0] In this week's issue: * Honoring openSUSE Wiki Reviewing Contributions * Michal Hrusecky: Public openSUSE 11.3 virtual machine * Jared Ottley: Alfresco PDF Toolkit * How to make Monitor refresh 120htz * Guillaume DE BURE (gdebure): A call for testers KMyMoney For a list of available translations see this page: http://en.opensuse.org/OpenSUSE_Weekly_News/112/Translations [0] http://en.opensuse.org/OpenSUSE_Weekly_News/112 -- Sincerely yours Sascha Manns openSUSE Community & Support Agent openSUSE Marketing Team Blog: http://saigkill.wordpress.com Web: http://www.open-slx.de (openSUSE Box Support German) Web: http://www.open-slx.com (openSUSE Box Support English) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Fluxbox Styles - You won't find a better site
by David C. Rankin 27 Feb '10

27 Feb '10

Listmates, For those that use fluxbox (I encourage all to try it), there is a site that has several hundred excellent themes. They also provide a bulk download of all themes in 2 .bz2 files. I have found many sites that have flux themes, but never a site where all or well done, updated and look as good: http://tenr.de/styles/?i=1 -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] using extended ascii codes
by Michael S. Dunsavage 27 Feb '10

27 Feb '10

how can I get KDE to allow me to type in extended ascii codes I'm trying to insert something like they copy right symbol using alt+0169 but it doesn't insert anything. -- Michael S. Dunsavage -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] obconf - What's broken, obconf or gtk2? Colors of #1919191 are definitely not right...
by David C. Rankin 27 Feb '10

27 Feb '10

Guys, Working with openbox tonight and I went to start obconf and ... nothing happened? It's always worked before, but I have noticed a few updates lately. So a bit of gdb revealed: 01:51 alchemy:~> gdb obconf GNU gdb (GDB) SUSE (7.0.1-58.1) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-suse-linux". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/bin/obconf...Missing separate debuginfo for /usr/bin/obconf (no debugging symbols found)...done. (gdb) run Starting program: /usr/bin/obconf <snip Missing separate debuginfo stuff> Missing separate debuginfo for /usr/lib64/gtk-2.0/2.10.0/immodules/im-xim.so ObRender-Message: Unable to parse color 'yellow ' ObRender-Message: Unable to parse color '#454545 ' ObRender-Message: Unable to parse color '#454545 ' (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `height > 0' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_fill: assertion `GDK_IS_PIXBUF (pixbuf)' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `src_pixbuf != NULL' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `height > 0' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_fill: assertion `GDK_IS_PIXBUF (pixbuf)' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `src_pixbuf != NULL' failed ObRender-Message: Unable to parse color '#454545 ' (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `height > 0' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_fill: assertion `GDK_IS_PIXBUF (pixbuf)' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `src_pixbuf != NULL' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `height > 0' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_fill: assertion `GDK_IS_PIXBUF (pixbuf)' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `src_pixbuf != NULL' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `height > 0' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_fill: assertion `GDK_IS_PIXBUF (pixbuf)' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `src_pixbuf != NULL' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_new: assertion `height > 0' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_fill: assertion `GDK_IS_PIXBUF (pixbuf)' failed (obconf:8676): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `src_pixbuf != NULL' failed ObRender-Message: Unable to parse color '#454545 ' ObRender-Message: Unable to parse color '#1919191' ObRender-Message: Unable to parse color '#1919191' Program received signal SIGSEGV, Segmentation fault. 0x00007ffff3c532b5 in ?? () from /lib64/libc.so.6 (gdb) quit A debugging session is active. Inferior 1 [process 8676] will be killed. Quit anyway? (y or n) y 01:52 alchemy:~> rpm -q --whatprovides /usr/lib64/gtk-2.0/2.10.0/immodules/im-xim.so gtk2-2.12.9-37.5 Hmm..., I'm no pixbuf scholar, but I can pickup on "Unable to parse color '#1919191'" being a problem - too many numbers. So the question is -- "Is obconf broken or is it gtk2?" -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] What's the New Double-White Desktop Border When Dragging Window in KDE44??
by David C. Rankin 27 Feb '10

27 Feb '10

Listmates, What is the new double-white border that goes all the way around the desktop that appears when you are dragging a window by its titlebar and you move the cursor against any screen-edge?? What's it for? Could whatever draws it be the new part of KDE44 that is breaking Gnome on 11.0? See: (37k) http://nirvana/dl/ss/kde4/kde44-double-white-brd.jpg -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3