July 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] upgrading Apache (Suse 10.0)
by James D. Parra 11 Jul '07

11 Jul '07

Hello, Currently running Apache/2.0.54 on an updated Suse 10.0 box and I'd like to upgrade Apache to version 2.0.59. Is there a way to this from rpms so as not to upgrade by recompiling? Also, where could I find rpms for this version? Many thanks, James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] SD/MMC/XD Card Slot
by Kai Ponte 11 Jul '07

11 Jul '07

For those who are curious and have a built-in SD card slot on a notebook, here's how to enable it. I have an HP Compaq nw9440 laptop with SUSE 10.2 and a built in SD-MS/Pro-MMC-SM-XD card slot. It doesn't work out of the box. I saw this person had the same issue and solved it: http://nw9440.narod.ru/ >From his site: <quote> After quick investigation i have found a note related to Texas Instruments SD MMC pci controller. The one is quite old but remains actual for TI [and SuSE?] for pci device: # lspci -s 6.2 02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) the command (now it is incorporated into /etc/init.d/boot.local) # setpci -s 6.2 4c=0x22 MMC controller works pretty good </quote> I ran lspci and found: jabba:/var/log # lspci -s 6.2 02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) jabba:/var/log # ...and then I ran setpci: jabba:/var/log # setpci -s 6.2 4c=0x22 All is good with the world now. Next hurdle - the built-in fingerprint reader. Not sure what use it might be but I want it working. Why? Because it is there. -- k www.perfectreign.com -- Kai Ponte www.perfectreign.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] missing device icons in KDE
by Sunny 11 Jul '07

11 Jul '07

Hi, using KDE 3.5.7 release 52.1 on pretty fresh opensuse 10.2. Even if I enable the display of the device icons on the desktop (Configure desktop settings/Behavior/Device Icons) and selecting all of the choices there, no device icons appear on the desktop, not a single one. Restarting the session after the change did not help either. Any ideas where/what to check? -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Evolution and dragging object to folder highlighting
by Hans van der Merwe 11 Jul '07

11 Jul '07

I dont like to drag objects with the mouse, but sometimes its just the easiest to move a mail item in Evolution to a different folder. When I do this in 2.8 or 2.10 the destination folder does not highlight to indicate that Im focusing the drop on that particular folder - is this just a Suse thing? or a Evolution issue? E-Mail disclaimer: http://www.sunspace.co.za/emaildisclaimer.htm -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

Re: [opensuse] Trash icon on desktop is not working
by vendion＠charter.net 11 Jul '07

11 Jul '07

Just copied over the new icon and I'm getting the same error. Joe Morris (NTM) wrote: > On 07/11/2007 01:36 AM, vendion(a)charter.net wrote: >> When I click on the trash icon on my desktop I get this error "Malformed >> URL trash:/" but I can open up Konqueror and type in the same url >> trash:/ and it works. I tried opening up the properties for the trash >> icon and copy and paste the url from Konqueror into the URL tab of the >> properties, but I still get the error. Whats even weirder is that this >> problem is only happing on my profile, everyone else is not having this >> problem. >> > If it is only happening on your profile, delete your trash icon and > manually copy over a new one from > /opt/kde3/share/apps/systemview/trash.desktop to your desktop. That > should fix it. HTH > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Triple screen options
by koffiejunkie 11 Jul '07

11 Jul '07

Hi guys, I'm Looking for your experiences using three (or possibly more) monitors under Linux? We use two to three screens at work (depending on our exact requirements). Using two screens on a dual-head card works mostly OK, at least for my legitimate work needs (some things like fullscreen mplayer don't behave so nicely, but that's not essential), but as soon as you run three or more screens and have to use two graphics cards, things get a little messy. Xinerama, for one, breaks hardware 3D, and some things behave weirdly. I am not sure if this is Xinerama's fault, or if it is a side effect from having two physical cards. I have noticed that, even if the two cards are identical the second card always performs much worse than the first one, even though the first one is driving two screens. By identical I mean an AGP and PCI that are otherwise the same (Radeon 7000 - PCI is way fast enough for this), or two PCI cards - doesn't seem to make a difference. I've looked online at cards like the Matrox G450 Quad, and wondered if anyone has experience running these under linux. How well does things like 3D and hardware overlay (as in MPlayer fullscreen with xv without trying to fullscreen over all the screens) work? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] Setting up wireless card in opensuse
by Sankaran, Balaji (STSD) 11 Jul '07

11 Jul '07

Hello, Last week, installed opensuse on my laptop. I have a compaq WL100 11mb/s card and I need to setup a wireless connection on my laptop. I tried using yash but could not be to do it. I see wlan0 and wifi0 list in my ifconfig command and when I tried to connect to my network, I could not able to see a ipaddress on the wlan0 interface. I can see the RX count increasing on wlan0 but no ipaddress. I tried dhcpcd wlan0 (and disabled all iptable rules) but it timeout after some time. Any help is very much appreciated. Thanks, Balaji -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Network settings
by John 11 Jul '07

11 Jul '07

Very generic question... what is the easiest way to quickly get all the current network info? ie ipaddress, gateway, dns servers etc I have used ifconfig, net and route, but can't seem to find one tool that will tell it all (sorry about the comparison, but like ipconfig /all in win) John. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 6

[opensuse] triple boot : Vista, SuSE and Ubuntu
by Hans Linux 11 Jul '07

11 Jul '07

ubuntu is quite tempting :D i would like to hv it install on my laptop. currently i have dual boot for my Vista and SUSE already. Is it OK for me to install ubuntu to have triple boot? would ubuntu set triple boot automatically, or i hv to edit manually some menu list? anyone experience this before? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

14 24

[opensuse] I've got a good one
by Hans Krueger 11 Jul '07

11 Jul '07

I can ping and surf the internet with firefox or semonkey but not with konqueror it gives me can not connect to host I can ftp and fish and the like no http strange ? -- Hans Krueger hkr(a)hanskruegerenterprizes.com <mailto:hanskrueger@adelphia.net> registered Linux user 289023 411024 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3