October 2005 - openSUSE Users - openSUSE Mailing Lists

hal.hotplug: could not get mountpoint for sysfs
by Rikard Johnels 01 Oct '05

01 Oct '05

Hi all! Fresh 9.3 install, plugging a SD memorycard into a reader and it doesnt automunt. It worked like a charm in 9.2. I got a /media/usb-<device enumeration> directory and the card was automigically mounted under it. Now i get nothing. This is what is reviled in /var/log/messages as i insert the SDcard; Oct 1 19:59:54 sparhawk kernel: SCSI device sda: 1998848 512-byte hdwr sectors (1023 MB) Oct 1 19:59:54 sparhawk kernel: klogd 1.4.1, ---------- state change ---------- Oct 1 19:59:54 sparhawk kernel: sda: Write Protect is on Oct 1 19:59:54 sparhawk kernel: sda: Mode Sense: 02 00 80 00 Oct 1 19:59:54 sparhawk syslog-ng[2345]: Changing permissions on special file /dev/xconsole Oct 1 19:59:54 sparhawk syslog-ng[2345]: Changing permissions on special file /dev/tty10 Oct 1 19:59:54 sparhawk kernel: sda: assuming drive cache: write through Oct 1 19:59:54 sparhawk kernel: SCSI device sda: 1998848 512-byte hdwr sectors (1023 MB) Oct 1 19:59:54 sparhawk kernel: sda: Write Protect is on Oct 1 19:59:54 sparhawk kernel: sda: Mode Sense: 02 00 80 00 Oct 1 19:59:54 sparhawk kernel: sda: assuming drive cache: write through Oct 1 19:59:54 sparhawk kernel: sda: sda1 Oct 1 19:59:54 sparhawk hal.hotplug[12892]: could not get mountpoint for sysfs Oct 1 20:00:00 sparhawk /etc/hotplug.d/block/50-hwscan.hotplug[12897]: new block device /block/sda/sda1 Oct 1 20:00:00 sparhawk hal.hotplug[12909]: could not get mountpoint for sysfs Where does hal.hotplug look for settings? I googled and couldnt find anything to enlighten me. Anyone?

1 0

Device Permissons
by Michael Schueller 01 Oct '05

01 Oct '05

Hello List, I´m trying to change the Permission of the Device dev/hdb2 to read/write for the Group Disk, but assoon i restart the system the defaul value is set again. I have tryed to put a rule into /etc/permission or /etc/permission.local but nothing will work. Could anybody tell me where it is written down that the devices have to have readonly for the Group Greats Michael

5 8

Installing 10 (OSS RC1) Under 9.3 Possible?
by Randall R Schulz 01 Oct '05

01 Oct '05

Hi, I have a well-functioning 9.3 installation and will be setting up a 10.0 installation using the Novell commercial distribution when it arrives. I'm attempting a preview installation using the 10.0 RC1 OSS release based on the 5-CD set of ISOs I just retrieved via the torrent published on the openSUSE.org Web site. What I'd like to do is run all (or as much as possible) of the installation software under my existing 9.3 setup. I want to do this for two reasons: 1) Keep the system available for ordinary operations during the (preview) installation. 2) Make it easy to access information about the existing configuration without having to write it all down or hunt for it in configuration files during the execution of the installer. Is this possible? Are there other ways to accomplish my goals (especially (2))? I have VMware and it occurred to me to set up a VM for the purpose of installing the new release, but that approach seems flawed because of the significant discrepancies between the emulated environment and the physical one on which I'll ultimately want the new installation to run. Thanks in advance for any tips, hints, pointers or instructions. Randall Schulz

3 2

VMWare 5.0, SuSE 9.3 and a patched 2.6. Kernel
by Steve Graegert 01 Oct '05

01 Oct '05

Hi all, I am running SuSE Linux 9.3 with kernel 2.6.11 and tried to install VMWare 5.0. While doing an online update the latest patches have been applied to the stock kernel. Now, 'uname -r' gives '2.6.11.4-21.9-default' which is obviously different from the previous stock kernel version 2.6.11.4.-20a-default. So far so good. When trying to install VMWare 5.0 the installation routine prompts for my kernel includes of the running kernel. The SuSE kernel sources have been installed to /usr/src/linux-2.6.11.4.-20a. No sources have been placed in /usr/src/linux-2.6.11.4-21.9 the source directory of my running kernel, except for two headers, namely autoconf.h and version.h. My /usr/src directory contains the following entries: linux:/usr/src # ls -la total 2 drwxr-xr-x 10 root root 384 2005-10-01 11:41 . drwxr-xr-x 12 root root 344 2005-08-13 19:41 .. drwxr-xr-x 23 root root 776 2005-08-13 19:21 dicts drwxr-xr-x 25 root root 736 2005-08-13 19:26 kernel-modules lrwxrwxrwx 1 root root 18 2005-10-01 11:40 linux -> linux-2.6.11.4-20a drwxr-xr-x 19 root root 720 2005-10-01 11:41 linux-2.6.11.4-20a drwxr-xr-x 3 root root 72 2005-03-24 02:04 linux-2.6.11.4-20a-obj drwxr-xr-x 4 root root 96 2005-09-09 19:44 linux-2.6.11.4-21.8 drwxr-xr-x 3 root root 72 2005-10-01 11:40 linux-2.6.11.4-21.9 drwxr-xr-x 3 root root 72 2005-08-19 18:48 linux-2.6.11.4-21.9-obj lrwxrwxrwx 1 root root 23 2005-10-01 11:41 linux-obj -> linux-2.6.11.4-20a-obj/ drwxr-xr-x 7 root root 168 2005-08-13 19:57 packages VMWare does not allow compilation of required kernel modules for the running kernel stating that it can't find the appropriate headers in /usr/src/linux: "The directory of kernel headers (version 2.6.11.4-20a-default) does not match your running kernel (version 2.6.11.4-21.9-default). Even if the module were to compile successfully, it would not load into the running kernel." I understand what is going on, but I don't know what to do next to fix this problem. Suggestions highly welcome. Thanks. Regards \Steve

3 4

Knoda not working
by Alistair Hamilton 01 Oct '05

01 Oct '05

Hi On RC1, when I try to connect knoda to a MySQL database, the application fails with the error knoda: symbol lookup error: /usr/lib/hk_classes/drivers/libhk_mysqldriver.so: undefined symbol: mysql_server_init MySQL is worlking properly. Has anyone got knoda working or is this a fundamental problem? I cannot find anything in Bugzilla. Regards Alistair

1 0

Kernel 2.4.31 over SuSE 9.3?
by Salvador Ramirez 01 Oct '05

01 Oct '05

Hello, Is it possible to use kernel 2.4.31 over SuSE 9.3? could it be any problem on doing this? The reason I would like to do this is because a barcode scanner I have does not work over kernel 2.6. Thanks in advance. ---sram http://www.google.com/search?q=%22Salvador+Ramirez%22

2 1

Re: [SLE] VMWare 5.0, SuSE 9.3 and a patched 2.6. Kernel
by Adam Vazquez Kb2jpd Internet Mobile w/ Treo 01 Oct '05

01 Oct '05

Hello from Adam. VMWare uses a customised version of the Linux kernel in order to do its job. It has to install hooks in the kernel in order to have to keep its control. If you want to continue using VMware,You should first uninstall VMWare and then do the on-line upgrade then do the VM install. Why are you using VMWare? If you are running mult-Linux machines, you might want to use Xen instead. Xen is also open-source. Any updates are also made to the Xen-ready kernels. Adam -----Original Message----- From: Steve Graegert <graegerts(a)gmail.com> Subj: [SLE] VMWare 5.0, SuSE 9.3 and a patched 2.6. Kernel Date: Sat Oct 1, 2005 6:41 am Size: 2K To: suse-linux-e(a)suse.com Hi all, I am running SuSE Linux 9.3 with kernel 2.6.11 and tried to install VMWare 5.0. While doing an online update the latest patches have been applied to the stock kernel. Now, 'uname -r' gives '2.6.11.4-21.9-default' which is obviously different from the previous stock kernel version 2.6.11.4.-20a-default. So far so good. When trying to install VMWare 5.0 the installation routine prompts for my kernel includes of the running kernel. The SuSE kernel sources have been installed to /usr/src/linux-2.6.11.4.-20a. No sources have been placed in /usr/src/linux-2.6.11.4-21.9 the source directory of my running kernel, except for two headers, namely autoconf.h and version.h. My /usr/src directory contains the following entries: linux:/usr/src # ls -la total 2 drwxr-xr-x 10 root root 384 2005-10-01 11:41 . drwxr-xr-x 12 root root 344 2005-08-13 19:41 .. drwxr-xr-x 23 root root 776 2005-08-13 19:21 dicts drwxr-xr-x 25 root root 736 2005-08-13 19:26 kernel-modules lrwxrwxrwx 1 root root 18 2005-10-01 11:40 linux -> linux-2.6.11.4-20a drwxr-xr-x 19 root root 720 2005-10-01 11:41 linux-2.6.11.4-20a drwxr-xr-x 3 root root 72 2005-03-24 02:04 linux-2.6.11.4-20a-obj drwxr-xr-x 4 root root 96 2005-09-09 19:44 linux-2.6.11.4-21.8 drwxr-xr-x 3 root root 72 2005-10-01 11:40 linux-2.6.11.4-21.9 drwxr-xr-x 3 root root 72 2005-08-19 18:48 linux-2.6.11.4-21.9-obj lrwxrwxrwx 1 root root 23 2005-10-01 11:41 linux-obj -> linux-2.6.11.4-20a-obj/ drwxr-xr-x 7 root root 168 2005-08-13 19:57 packages VMWare does not allow compilation of required kernel modules for the running kernel stating that it can't find the appropriate headers in /usr/src/linux: "The directory of kernel headers (version 2.6.11.4-20a-default) does not match your running kernel (version 2.6.11.4-21.9-default). Even if the module were to compile successfully, it would not load into the running kernel." I understand what is going on, but I don't know what to do next to fix this problem. Suggestions highly welcome. Thanks. Regards \Steve -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

1 0

Exchange for Evolution
by Eric Wagar 01 Oct '05

01 Oct '05

Where did the "Exchange" button within Evolution go to? Is there a new process to set up Exchange connectivity with 10? thanks eric

2 1

Open Office Database Wizard Question
by Greg Wallace 01 Oct '05

01 Oct '05

I'm trying to run an OpenOffice database query against an Oracle database on the same machine via an ODBC connection. I can see tables and build queries in Open Office DB just fine, but when I try to run them, I get the following (always the same, so this is a sample from one I ran) -- SQL STATUS: HY000 Error Code: 1000 Syntax error in SQL Expression Syntax error, unexpected INVALIDSYMBOL, expecting FROM or SQL_TOKEN_INTO, Invalid symbol: ."A" The sql it put together in the Query Wizard looks like this -- SELECT "TEST_TABLE1"."A" FROM "OPS$GREGW"."TEST_TABLE1" "TEST_TABLE1" Why it wants to put the "'s around everything I don't know, but I copied this exact sql statement into the Oracle built in interactive tool (sqlplus), ran it, and it worked fine. It's actually a perfectly valid query (select table TEST_TABLE1 column A from schema.table=OPS$GREGW.TEST_TABLE1" assigning an alias to the table of TEST_TABLE1). Anybody have any clues on what could be going wrong here and why OpenOffice can build but not run this query? Thanks, Greg Wallace

1 0

panel config/prefs
by Eric Wagar 01 Oct '05

01 Oct '05

Is there a way to make the minimized app buttons stop changing size when switch between the apps or when switching web pages? thanks eric

1 0