June 2000 - openSUSE Users - openSUSE Mailing Lists

RE: Re: [SLE] remote x softwae
by suselinux＠bugboysworld.com 29 Jun '00

29 Jun '00

('binary' encoding is not supported, stored as-is) I guess I wasn't clear in my original post. I have a linux machine on my network behind my firewall. I was looking for software that I can run on NT machines to get a X session going both on my network and over the internet (I don't want to remote control the box (vnc), but I want to be a client with proper authority). This list has given me quite a bit of information to go on. Thanks for all you input. -Tim >From: "Sean Akers" <seana(a)romaxtech.com> >To: suse-linux-e(a)suse.com >Date: Wed, 28 Jun 2000 10:58:36 +0100 >Subject: Re: [SLE] remote x softwae > > > > > >Sean Akers@ROMAX >28/06/2000 10:58 > >Starnet's X-Win32 is good and the price is reasonable for this kind of >software. > >See http://www.starnet.com/. > >Sean. > > > >-- >To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com >For additional commands send e-mail to suse-linux-e-help(a)suse.com >Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ Tim Love http://www.bugboysworld.com Quest for Knowledge ------------------------------------------------------------ ***** Get your own free mail from BugBoy's World. ***** ***** Click here ----> http://www.bugboysworld.com ***** -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

[SLE] reiserfs
by MDCleary＠dgexchange.dg.com 29 Jun '00

29 Jun '00

SuSE 6.3 (2.2.13) Having just installed a new hard drive, I was planning on moving my current Linux installation (on a smaller disk) to the new drive. However, I have decided to do a fresh install instead. I would like to use reiserfs, but I'm not sure about all that I need to do. I know that 6.3 has support for reiserfs, and there is an rpm on the SuSE ftp site. Is this all I need? What's the step by step process? TIA, Mike -------------------------------------------------------------------------- Michael Cleary UNIX Qualification and Commands Data General, a Division of EMC2 62 T.W. Alexander Dr. Research Triangle Park, NC mdcleary(a)dg-rtp.dg.com (919) 248-6033 -------------------------------------------------------------------------- -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

[SLE] Shameless plug: Vote for SuSE
by grimmer＠suse.de 29 Jun '00

29 Jun '00

Hi, I couldn't resist :) http://www.firstlinux.net/pollBooth.php3?pollID=1 Bye, LenZ -- ------------------------------------------------------------------ Lenz Grimmer SuSE GmbH mailto:grimmer@suse.de Schanzaeckerstr. 10 http://www.suse.de/~grimmer/ 90443 Nuernberg, Germany Your lucky color is fading. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

RE: [SLE] mpeg2decode ?
by psims＠lombard.co.uk 29 Jun '00

29 Jun '00

http://tns-www.lcs.mit.edu/manuals/mpeg2/index.html may have what you seek On Thursday, June 29, 2000 1:41 PM, Francois Pinard [SMTP:pinard@iro.umontreal.ca] wrote: > Hi, people. Trying `animate *.mpg', I get: > > sh: mpeg2decode: command not found > animate: delegate failed (mpeg2decode -q -b %i -f -r -o3 %o%%05d). > animate: no delegate for this image format (MPG). > > Better ask than fight :-). > > `animate' is part of ImageMagick. Is `mpeg2decode' available in the SuSE > 6.4 distribution? If yes, where (and how could I have easily found it)? > If not, could ImageMagick be installed to depend on an available MPEG player? > > -- > Francois Pinard http://www.iro.umontreal.ca/~pinard > > > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ "WorldSecure Server <lombard.co.uk>" made the following annotations on 06/29/00 13:47:17 ------------------------------------------------------------------------------ The opinions expressed within this email represent those of the individual and not necessarily those of Lombard North Central. The contents of this Email may be privileged and are confidential. It may not be disclosed to or used by anyone other than the addressee(s), nor copied in any way. If received in error, please advise the sender, then delete from your system. Should you wish to use Email as a mode of communication, Lombard North Central PLC are unable to guarantee the security of Email content outside of our own computer systems. Lombard North Central PLC Registered in England No 337004 Registered Office 3 Princess Way Redhill Surrey RH1 1NP A Member of the Royal Bank of Scotland Group ============================================================================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] mpeg2decode ?
by pinard＠iro.umontreal.ca 29 Jun '00

29 Jun '00

Hi, people. Trying `animate *.mpg', I get: sh: mpeg2decode: command not found animate: delegate failed (mpeg2decode -q -b %i -f -r -o3 %o%%05d). animate: no delegate for this image format (MPG). Better ask than fight :-). `animate' is part of ImageMagick. Is `mpeg2decode' available in the SuSE 6.4 distribution? If yes, where (and how could I have easily found it)? If not, could ImageMagick be installed to depend on an available MPEG player? -- François Pinard http://www.iro.umontreal.ca/~pinard -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] OT: How to access NetBSD slices
by dahlqvist＠sundsvall.mail.telia.com 29 Jun '00

29 Jun '00

I have a NetBSD-partition on one of my hard drives. Since I haven't yet figured out how to connect to Internet via modem under NetBSD I want to be able to transfer files from my LINUX system to the NetBSD slices.(No I'm not converting, it's just a way to learn UNIX from the bottom up.) I have compiled modular support for UFS and the experimental support for writing to UFS into my kernel. I have also compiled in support for BSD slices. (I hope this applies to NetBSD slices and not only FreeBSD slices.) If I mount any of my slices it shows up as mounted rw in /etc/mtab. Apparently also LINUX considers that there's something on them, since df produces reasonable output (but du claims they are empty!) PROBLEM: I cant find any files on my NetBSD slices, nor can I write to them. This is of course WAY off topic, so if you have a solution please mail me OFF the list. I posted the message to this list ONLY because there are quite some gurus out there. Regards Anders -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Fetchmail
by sean.rima＠tcob1.net 29 Jun '00

29 Jun '00

For those using Fetchmail, I have just built and uploaded to my web site Fetchmail 5.4.2. SuSE 6.3 RPM but should work on 6.4. http://www.tcob1.net Sean -- Linux User: #124682 ICQ: 679813 My Current Uptime is 0d, 4h and 10m on Linux 2.2.16 ...What's a new brides' wedding night dread? Microsoft. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Broken link in SLE .sig
by jcm＠bigskytel.com 29 Jun '00

29 Jun '00

[cc'd to the list owner] I just discovered that the link in the SLE signature is broken. This will not be very useful until fixed. http://www.suse.com/Support/Doku/FAQ/ David -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] SSH
by ephlodur＠rocketmail.com 29 Jun '00

29 Jun '00

Hello all do SSH have to be a both end of the connection.... and how do I get TCwarper woking ===== ,. \\|// - ? (o o) /======================oOOO=(_)OOo=====================\ email : ephlodur(a)rocketmail.com What we need is Awarness we can't get carless. __________________________________________________ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 3

[SLE] Kernel upgrade.
by bljilek＠bigfoot.com 29 Jun '00

29 Jun '00

I have tried to upgrade the kernel on my 6.3 to both the 2.2.14 and 2.2.16 from the rpm's from SuSE. Both of them resulted in: ran out of input data system halted Right after LILO and it started loading the kernel. What does this mean? I'm going to compile my own from the 2.2.14 since there is a problem with 2.2.16 but I'd like to know why I can't update using the rpm's. Or am I doing something wrong? I used the k_deflt.rpm with YaST. Is there something else I have to do that I'm missing? Thanks. -- B. L. Jilek <bljilek(a)bigfoot.com> | ICQ: 10733954 | Linux user: 163800 PGP: DSS 0x800B3A69 RSA 0x3F1963C5 | OS: SuSE Linux 6.3 --------------------------------------------------------- -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 2