May 2000 - openSUSE Users - openSUSE Mailing Lists

[SLE] [Fwd: [SLE] HP color inkjet printers]
by pollion＠online.fr 30 May '00

30 May '00

-- ============================================================================== Paul Ollion. ============================================================================== <STRONG>attached mail follows:</STRONG><HR> Sure it IS slow I used it with DOS Windoze before going to linux but it was not much faster though I never went further than W3.1 into the M$ trap. however the results are good . I just bear with it and take a break or read a book while printing. I can send you a copy of my /etc/printcap if it is of any use to you ; but I suppose you must have the same. just tell me if you are interested. -- ============================================================================== Paul Ollion. ============================================================================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Re: [SLE] Loading the sound modules
by jpennington＠atipa.com 30 May '00

30 May '00

"Paul W. Abrahams" <abrahams(a)valinet.com> said: > root@pleurotus:/aux/home/pwa > modprobe es1371 > /lib/modules/2.2.15/misc/es1371.o: init_module: Device or > resource busy I hate to break this to you, Paul, but if you recompiled your kernel just for es1371 support, modularly or otherwise, you wasted your time :). Messages like the above say one of two things to me; 1) The module has loaded without your knowledge (lsmod will show you this). 2) You don't actually have an es1371 card installed (lspci will verify this). Which one do you think it is? -- -=|JP|=- Jon Pennington | Atipa Linux Solutions jpennington(a)atipa.com | http://www.atipa.com Kansas City, MO, USA | 816-241-2641 x121 -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] Installing SUN's programs on Linux box.
by alex＠daniloff.com 30 May '00

30 May '00

Hello Linux folks! Does somebody know if it possible to install SUN Solaris programs and applications on Linux box? I want to use Electronic Design Software distributed for SUN workstations on my Linux box. Do I need re-compile this software? Any suggestions are gladly appreciated. Thanks, Alex -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

[SLE] <Off_Topic> SETI Units ~ Why won't my Script run ?
by tabanna＠aig.forthnet.gr 30 May '00

30 May '00

I like to have a SETI work-unit in reserve. That envolves doing a swap-over A ---> B and B ---> A I tried to write a script to do this, but it won't run, as 'root' :- ................................................ #!/bin/sh # Swap SETI Units for transmission # cd /home/tab3 cp *.sah /home/tab3/tmp/ cd /home/tab3 mv *.sah *.zah cd /home/tab3 mv *.zah /home/tabanna/ cd /home/tabanna cp *.sah /home/tabanna/tmp/ cd /home/tabanna mv *.sah /home/tab3/ cd /home/tabanna mv *.zah *.sah cd /home/tabanna rm lock.sah cd /home/tabanna chown tabanna *.sah cd /home/tab3 rm lock.sah cd /home/tab3 chown tab3 *.sah cd ~ .......................................... ~ Any idea what's wrong ? best :) -- ____________ sent on Linux ___________ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 3

[SLE] kernel 2.4
by keith＠HaggleWare.com 30 May '00

30 May '00

I'd be a little weary of installing 2.4.0 unless kernel hacking strikes your fancy. It is only a test release and there are reasons why it is a test release. :) In the README-2.4 provided by Linus: >> No. It doesn't really exist yet. But I'll be gone for three weeks, and in the meantime there's a "2.4.0-test1" kernel here. It's not a real 2.4.0 release, but we should be getting closer. There's going to be other test-kernels after this one, and we'll find bugs. And bad behaviour. And wonderful features which we'll document some day. Alan Cox is most likely to maintain a "2.4.0-ac" series while I'm gone. Not the same thing as 2.4.0 either, but by testing these test-kernels out and giving feedback, we'll get to that some day. Have fun. And let's see how many people find this without it even being announced ;) Linus << Regards, kw /* Keith Warno ** Developer & Sys Admin ** http://www.HaggleWare.com/ */ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

RE: [SLE] CD-RW for Digital AlphaStation 200
by tduggan＠dekaresearch.com 30 May '00

30 May '00

Hi, -----Original Message----- From: Jim Hoepner [SMTP:jhoepner@tvsw.org] Sent: Tuesday, May 30, 2000 10:14 AM >I am looking for CD-RW recommendations for a Digital >AlphaStation 200 and plan on purchasing SuSE 6.3(alpha). I'm using a Yamaha SCSI on my x86, I have not tried it with my alpha so YMMV. You would be better off asking on the alpha list. suse-axp(a)suse.com To subscribe, e-mail: suse-axp-subscribe(a)suse.com Tim -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] CD-RW for Digital AlphaStation 200
by jhoepner＠tvsw.org 30 May '00

30 May '00

I am looking for CD-RW recommendations for a Digital AlphaStation 200 and plan on purchasing SuSE 6.3(alpha). Thanks! jrh -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] WP8 and XF86 4.0
by jpennington＠atipa.com 30 May '00

30 May '00

Hi, everybody! I'm trying to run WordPerfect 8 (the native Linux one ;) on my XFree86 4.0 system, and when I try to run `xwp', I get an error to the effect of: err: cannot load shared library libXt.so.6 This is a killer, since WP cannot load past this point. I had XFree86 3.3.6 installed on this machine, and I did not remove it before compiling and installing XF86 4. Is there something I can do manually to fix this, or some sort of environment variable I can set? -- -=|JP|=- "Why, oh, why didn't I take the blue pill?" Jon Pennington | Atipa Linux Solutions -o) jpennington(a)atipa.com | http://www.atipa.com /\\ Kansas City, MO, USA | 816-595-3000 x1550 _\_V 6D04 39E0 CAE9 9ADA 2CA3 2EBE 898A 6C37 CA1E A29C -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

RE: [SLE] Kernel 2.4 and no ppp0 interface
by kevin.jackson＠jhallpr.demon.co.uk 30 May '00

30 May '00

Cheers muzh - reading the documentation does actually work!! ;) For all those who want to install Kernel 2.4.0 and get that modem dialling out you need to get the latest version of the pppd daemon at the following address ftp://linuxcare.com.au/pub/ppp/ppp-2.4.0b2.tar.gz Extract it. ./configre make make install will do the job nicely. Kev Jackson -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Problem with DOS Partition
by Liane.Pirscher＠mannesmann-co.net 30 May '00

30 May '00

That doesn't help me either -- I've tried all the filesystem types. I'm thinking there might be something else to look out for. Is there a way to check if the device is 'mountable' or not? i can't get the partition to show up in LILO either, for some reason. :( Liane --- My fstab: /dev/hdxx /windows/C vfat noauto,user 0 0 Tom -- TRBishop tb64710(a)ltec.net Registered Linux User #12043 -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

4 3

[SLE] working with active log files
by Anonymous User 30 May '00

30 May '00

I need to automate Lotus Domino startup and shutdown. The Lotus Notes is one of those apps that dumps stuff to the 'console' as it runs. I need to capture this in a file which I will do by redirecting the output to a file callec console.log. The Domino server must stay running 24/7. I would like the log to be "cut" daily into a file named: console20000527.log and then gziped. how would I go about cutting the log daily? I know that I should use cron, but how do I create the filename that has the date at the end? How do I get the contents of the active log file (console.log) into the dated log file? How do I clear out the active log file while it is still being used by the Domino server? Should I do all this in one long command in cro or should I put it in a script file? Sam -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] Can't access SuSE ftp site with web browser
by jl＠masonlink.net 30 May '00

30 May '00

Acces denied to sites without a working nameserver. This has been enabled for security reasons on May 27, 2000 You may be lucky with one of our mirror-sites: http://www.suse.de/en/support/download/ftp/index.html ftpadmin(a)suse.com User anonymous access denied. -------- end What must I do to fix this? -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] more reasons not to trust install binaries
by jmgrant＠primenet.com 30 May '00

30 May '00

... especially ones from Real. This article is specifically about Win* software they distribute. I never did get around to installing RealPlayer btw. http://www.vortex.com/privacy/priv.09.15 -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Yanq (Yet another newbie question): remote X access.
by evert.rosseel＠sidmar.be 30 May '00

30 May '00

Dear list, I want to configure my system so that it automatically starts an X client at startup (xdm runs fine), so that I can run applications from a WinNT system. What is the best way to achieve this? (I don't need the graphical desktop systematically on my Linux system, but is installed and runs correctly.) With kind regards, Evert -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] Why is gftp 200 times faster than xftp?
by europax＠home.com 30 May '00

30 May '00

I just finished downloading all of 6.4 via ftp. It actually took me longer fooling around with various ftp programs than it did to download the distribution :( In the process of this I found that xftp ran consistently around 15k/s while gftp ran at 300-500k/s. Does anyone know why this is? I guess the advent of cable modems is showing the limitations of older programs. Even gftp crashed several times with segmentation faults. I was only trying ftp programs that could recurse thru directories. Are there any ftp programs out there which can recurse thru directories and handle symbolic links within the same directory structure? I wonder because the "full-names" directory caused me some problems, where gftp tried to download the same files twice. Thanks, Rob. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 4

[SLE] configuring Postfix /w dialup ISP
by ashleyg＠dnai.com 30 May '00

30 May '00

Hi. I'm trying to configure Postfix on my stand alone PC to handle remote mail via my dialup ISP. Although my mail client, Mutt, gets the 'to:' and 'from:' header addresses correct, it appears Postfix changes my 'from:' address en route. My ISP rejects my mail: "Sender domain must exist." My header as made by Mutt: From: ashley <ashleyg(a)dnai.com> To: ashley <ashleyg(a)dnai.com> Cc: Bcc: Subject: test4 Reply-To: ashley <ashleyg(a)dnai.com> /var/log/mail: May 29 23:06:04 alban postfix/pickup[2011]: 422A9184ED: uid=500 from=<ashley> May 29 23:06:04 alban postfix/cleanup[2018]: 422A9184ED: message-id=<20000529230604.B1888(a)alban.local> May 29 23:06:04 alban postfix/qmgr[193]: 422A9184ED: from=<ashley(a)alban.local>, size=534 (queue active) May 29 23:06:07 alban postfix/smtp[2019]: 422A9184ED: to=<ashleyg(a)dnai.com>, relay=mail2.dnai.com[207.181.194.95],delay=3, status=bounced (host mail2.dnai.com[207.181.194.95] said: 501 <ashley(a)alban.local>... Sender domain must exist) How do I get Postfix to send my remote mail as from=<ashleyg(a)dnai.com> and not as from=<ashley(a)alban.local>? Someone posted this same issue regarding Sendmail last week. TIA -- -ashley One of these days I'm going to completely organize my life. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

Re: [SLE] Where to find SSH?
by jpennington＠atipa.com 30 May '00

30 May '00

"Robert C. Paulsen, Jr." <paulsen(a)texas.net> said: > SuSE's web site explains that my SuSE 6.4 CDs don't have it because > of US export restrictions and says that I can find it on one of the > non-US mirroir sites. Well, I look at many of them and couldn't find > any package having a name starting with "ssh". Okay, here's the thing ;). `International' and `German' distributions are not the same; International being based on (because it is shipped through) the US release. To get SSH, you need to use a German mirror, such as ftp://ftp.gwdg.de/pub/linux/suse/6.4/i386.de/ You can even set up YaST so that this is your installation site if you have a fast connection or a lot of patience ;). -- -=|JP|=- Jon Pennington | Atipa Linux Solutions jpennington(a)atipa.com | http://www.atipa.com Kansas City, MO, USA | 816-241-2641 x121 -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Where to find SSH?
by paulsen＠texas.net 30 May '00

30 May '00

Where can I download the SuSE RPM for SSH? SuSE's web site explains that my SuSE 6.4 CDs don't have it because of US export restrictions and says that I can find it on one of the non-US mirroir sites. Well, I look at many of them and couldn't find any package having a name starting with "ssh". Is the package named something else? Do the mirror sites really have it? Can anyone give me more precise info than what is on SuSE's web page? Thanks! -- ____________________________________________________________________ Robert Paulsen -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

[SLE] Windows on Linux
by raghav＠easi.soft.net 30 May '00

30 May '00

Hi, Is there any way to run a Windows 95 executable on my Linux 6.3 system?? I actually tried wine, but i suppose wine requires a windows partition to really run a Windows exe. If i am wrong, please let me know. I have a Linux only system in my office and i would like to see Windows exes also on my screen. Raghav -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

4 6

[SLE] HP color inkjet printers
by jathomas＠dhc.net 30 May '00

30 May '00

Does anyone have tips on installing an HP color inkjet printer (mine's a 970Cse)? I'd be happy to get it to print in black and white, and consider color a bonus. I'm running 6.0 and KDE. Thanks in advance. JT ______________________________ John A. Thomas jathomas(a)dhc.net -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

4 3

[SLE] wordperfect suse 6.4
by eighteenrabbit＠bright.net 30 May '00

30 May '00

Greetings, There has been talk on the list concerning the existence of a wordperfect rpm. For one reason or another, there are complications which prevent it from being distributed in the USA? I cannot locate this rpm on suse's servers for 6.1, 6.3, nor 6.4. It is not included on the cds that came with the box I bought. I have no problem with installing tarballs. I downloaded it from Corel twice to confirm it wasn't corrupted (very noisy lines out here, but shouldn't gzip/tar check for this?). Here is the actions I took to install this program, as output from 'script'. Note that my display is set properly. Sorry for the color, and all the other redundant control characters. Script started on Fri May 26 01:16:39 2000 bash-2.03# l [00mtotal 23212 drwxr-xr-x 2 root root 4096 May 26 01:16 [01;34m.[00m/ drwxr-xr-x 11 ahenry root 4096 May 26 01:16 [01;34m..[00m/ -rw------- 1 root root 23730473 May 22 02:44 [00mGUILG00.GZ[00m [mbash-2.03# tar -zxf GUI* l bash-2.03# l [00mtotal 51236 drwxr-xr-x 2 root root 4096 May 26 01:17 [01;34m.[00m/ drwxr-xr-x 11 ahenry root 4096 May 26 01:16 [01;34m..[00m/ -rw------- 1 root root 23730473 May 22 02:44 [00mGUILG00.GZ[00m -rw-r--r-- 1 424 users 850 Dec 9 1998 [00mReadme[00m -rwxr-xr-x 1 424 users 5818 Dec 9 1998 [01;31mRunme[00m* -rw-r--r-- 1 424 users 4177920 Dec 9 1998 [00mb_ins00[00m -rw-r--r-- 1 424 users 143360 Dec 9 1998 [00mb_ins01[00m -rw-r--r-- 1 424 users 4065280 Dec 9 1998 [00mb_req00[00m -rw-r--r-- 1 424 users 849920 Dec 9 1998 [00mb_req01[00m -rw-r--r-- 1 424 users 133120 Dec 9 1998 [00mb_us00[00m -rw-r--r-- 1 424 users 4259840 Dec 9 1998 [00mg_req00[00m -rw-r--r-- 1 424 users 4188160 Dec 9 1998 [00mg_req01[00m -rw-r--r-- 1 424 users 4208640 Dec 9 1998 [00mg_req02[00m -rw-r--r-- 1 424 users 2334720 Dec 9 1998 [00mg_req03[00m -rw-r--r-- 1 424 users 4075520 Dec 9 1998 [00mg_us00[00m -rw-r--r-- 1 424 users 184320 Dec 9 1998 [00mg_us01[00m [mbash-2.03# sh Runme Did you unzip and untar the files you downloaded? (y/n) y Extracting Files... Please Wait . Linux 2.2.14 not certified. Continue? (y/n) y .. ./install.wp: linux/ins/wpinstg: No such file or directory Warning: The graphical install program has failed. Trying to run the character-based install program. [H[2Jcat: .wptemp: No such file or directory cat: .wplist: No such file or directory cat: shared/license.: No such file or directory [H[2J[H[2Jcat: .wptemp: No such file or directory cat: .wptemp: No such file or directory [H[2Jcat: .wptemp: No such file or directory cat: .wplist: No such file or directory [H[2Jcat: .wptemp: No such file or directory cat: .wptemp: No such file or directory [H[2Jcat: .wptemp: No such file or directory cat: .wplist: No such file or directory [H[2Jcat: .wptemp: No such file or directory cat: .wplist: No such file or directory wc: .wplist: No such file or directory ./install.wp: [: : integer expression expected [H[2Jcat: .wptemp: No such file or directory cat: .wptemp: No such file or directory mv: .wplist: No such file or directory [H[2Jcat: .wptemp: No such file or directory sed: can't read .wplist: No such file or directory [H[2J[H[2J Installing Files... Percent Complete: sed: can't read shared/.prlist: No such file or directory chmod: too few arguments Try `chmod --help' for more information. chmod: /wplib/.wpbuildc: No such file or directory chmod: /wplib/.wpbuildx: No such file or directory [7m 1%[27mchmod: /shbin10/lmgrd: No such file or directory [7m 2%[27mchmod: /shbin10/lmutil: No such file or directory chmod: /shbin10/wplmd8: No such file or directory [7m 3% [27mchmod: /shlib10/bristxt.us: No such file or directory [7m 4% [27mchmod: /shbin10/hyperhelp: No such file or directory [7m 5% [27mchmod: /shbin10/cvt: No such file or directory chmod: /shbin10/cjpeg: No such file or directory [7m 6% [27mchmod: /shbin10/djpeg: No such file or directory [7m 7% [27mchmod: /wpbin/README.1: No such file or directory chmod: /wpbin/README.2: No such file or directory [7m 8% [27mchmod: /wpbin/README.3: No such file or directory [7m 9% [27mchmod: /wpbin/README.4: No such file or directory [7m 10% [27mchmod: /wpbin/README.5: No such file or directory chmod: /wpbin/README.6: No such file or directory [7m 11% [27mchmod: /wpbin/README.wpsahelp: No such file or directory [7m 12% [27mchmod: /wpbin/README.address: No such file or directory chmod: /wpbin/README.copy: No such file or directory [7m 13% [27mchmod: /wpbin/README.demo: No such file or directory [7m 14% [27mchmod: /wpbin/README.errata: No such file or directory [7m 15% [27mchmod: /wpbin/README.icon: No such file or directory chmod: /wpbin/README.install: No such file or directory [7m 16% [27mchmod: /wpbin/README.wpmagic: No such file or directory [7m 17% [27mchmod: /wpbin/README.support: No such file or directory chmod: /wpbin/README: No such file or directory [7m 18% [27mchmod: /shlib10/hohus.hlp: No such file or directory [7m 19% [27mchmod: /shlib10/wpgmus.hlp: No such file or directory [7m 20% [27mchmod: /shlib10/wpptus.hlp: No such file or directory chmod: /shlib10/wpshus.hlp: No such file or directory [7m 21% [27mchmod: /shlib10/default.prs: No such file or directory [7m 22% [27mchmod: /shlib10/header.wp: No such file or directory [7m 23% [27mchmod: /shlib10/pcl4map.fil: No such file or directory chmod: /shlib10/pssave.prs: No such file or directory [7m 24% [27mchmod: /shlib10/trailer.wp: No such file or directory [7m 25% [27mchmod: /shlib10/wp.drs: No such file or directory chmod: /shlib10/wp.lrs: No such file or directory [7m 26% [27mchmod: /shlib10/wp_wp_us.lab: No such file or directory [7m 27% [27mchmod: /shlib10/wpqrs.us: No such file or directory [7m 28% [27mchmod: /shlib10/XKeysymDB: No such file or directory chmod: /wpbin/wpmerge: No such file or directory [7m 29% [27mchmod: /wplib/wpmcus.hlp: No such file or directory [7m 30% [27mchmod: /wplib/wpsaus.hlp: No such file or directory chmod: /wplib/wpwpus.hlp: No such file or directory [7m 31% [27mchmod: /wplearn/report.asc: No such file or directory [7m 32% [27mchmod: /shlib10/wpus.lex: No such file or directory [7m 33% [27mchmod: /wplib/cmmrs.us: No such file or directory chmod: /wplib/cyrillic.map: No such file or directory [7m 34% [27mchmod: /wplib/greek.map: No such file or directory [7m 35% [27mchmod: /wplib/.wp8styles.us: No such file or directory chmod: /wplib/wpml31us.exc: No such file or directory [7m 36% [27mchmod: /wplib/wpmrs.us: No such file or directory [7m 37% [27mchmod: /wplib/wpof40us.exc: No such file or directory [7m 38% [27mchmod: /wplib/wpus.icr: No such file or directory chmod: /wpmacros/archwpg: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory [7m 39% [27mchmod: /wpmacros/us/archmac.us: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory [7m 40% [27mchmod: /wplib/wp8us.qcr: No such file or directory [7m 41% [27mchmod: /shlib10/wpus.ths: No such file or directory chmod: /shbin10/archfltr: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory [7m 42% [27mchmod: /shlib10/license.opt: No such file or directory [7m 43% [27mchmod: /shbin10/wplicense: No such file or directory chmod: /shbin10/lm_isadmin: No such file or directory [7m 44% [27mchmod: /shbin10/servers_up: No such file or directory [7m 45% [27mchmod: /shlib10/fonts/archbdf: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory [7m 46% [27mchmod: /shlib10/fonts/archpcf: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory chmod: /shlib10/fonts/dofonts: No such file or directory [7m 47% [27mchmod: /wpbin/instadm: No such file or directory [7m 48% [27mchmod: /wpexpdocs/.junk: No such file or directory chmod: /wpgraphics/.junk: No such file or directory [7m 49% [27mchmod: /wpmacros/.junk: No such file or directory [7m 50% [27mchmod: /shlib10/wpdm.dat: No such file or directory [7m 51% [27mchmod: /shlib10/wpmagic: No such file or directory chmod: /shlib10/install.lk: No such file or directory [7m 52% [27mchmod: /shbin10/install.wp: No such file or directory [7m 53% [27mchmod: /shlib10/readme.ftp: No such file or directory chmod: /shlib10/admintxt.us: No such file or directory [7m 54% [27mchmod: /shlib10/libcvt.us: No such file or directory [7m 55% [27mchmod: /shlib10/errtxt.us: No such file or directory [7m 56% [27mchmod: /shlib10/libfmtxt.us: No such file or directory chmod: /shlib10/guitxt.us: No such file or directory [7m 57% [27mchmod: /wplib/macerr.us: No such file or directory [7m 58% [27mchmod: /shlib10/libpfx.us: No such file or directory chmod: /shlib10/prnttxt.us: No such file or directory [7m 59% [27mchmod: /shlib10/prs5028.us: No such file or directory [7m 60% [27mchmod: /shlib10/prs5128.us: No such file or directory [7m 61% [27mchmod: /shlib10/sf5028.us: No such file or directory chmod: /shlib10/sf5128.us: No such file or directory [7m 62% [27mchmod: /shlib10/qftxt.us: No such file or directory [7m 63% [27mchmod: /shlib10/vwengtxt.us: No such file or directory [7m 64% [27mchmod: /shlib10/vwrtxt.us: No such file or directory chmod: /shlib10/libwptxt.us: No such file or directory [7m 65% [27mchmod: /shlib10/wtapi.us: No such file or directory [7m 66% [27mchmod: /shlib10/wtutxt.us: No such file or directory chmod: /wplib/pr_icons.us: No such file or directory [7m 67% [27mchmod: /shlib10/prlist.us: No such file or directory [7m 68% [27mchmod: /shlib10/wp60dm03..all: No such file or directory [7m 69% [27mchmod: /shlib10/wp60hp01..all: No such file or directory chmod: /shlib10/wp60ms01..all: No such file or directory [7m 70% [27mchmod: /shlib10/wp60ps01..all: No such file or directory [7m 71% [27mchmod: /shlib10/wp60ps02..all: No such file or directory chmod: /shlib10/wpco03n_.pfb: No such file or directory [7m 72% [27mchmod: /shlib10/archafm: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory [7m 73% [27mchmod: /shlib10/archpfb: No such file or directory ./install.wp: /tmp/WpTmP1/linux/ins/wxar: No such file or directory [7m 74% [27mchmod: /shlib10/wpcerr.us: No such file or directory chmod: /shbin10/tenkey: No such file or directory [7m 75% [27mchmod: /shlib10/nls.alias: No such file or directory [7m 76% [27mchmod: /shlib10/C: No such file or directory chmod: /shlib10/nls.dir: No such file or directory [7m 77% [27mchmod: /wpbin/xwpsahlp: No such file or directory [7m 78% [27mchmod: /wplib/guiwptxt.us: No such file or directory [7m 79% [27mchmod: /wpbin/xwp: No such file or directory chmod: /wplib/wperr.us: No such file or directory [7m 80% [27mchmod: /shlib10/wpcurs.us: No such file or directory [7m 81% [27mchmod: /shlib10/exctxt.us: No such file or directory [7m 82% [27mchmod: /shbin10/wpexc: No such file or directory chmod: /shlib10/wpfierr.us: No such file or directory [7m 83% [27mchmod: /shlib10/wpfitxt.us: No such file or directory [7m 84% [27mchmod: /shlib10/gmk5txt.us: No such file or directory chmod: /shlib10/gw51en.mor: No such file or directory [7m 85% [27mchmod: /shlib10/gw51uk.rul: No such file or directory [7m 86% [27mchmod: /shlib10/gw51us.rul: No such file or directory [7m 87% [27mchmod: /shbin10/xwpgmk5: No such file or directory chmod: /wplib/wpicons.us: No such file or directory [7m 88% [27mchmod: /shbin10/wpp: No such file or directory [7m 89% [27mchmod: /shbin10/wppx: No such file or directory chmod: /shlib10/porterr.us: No such file or directory [7m 90% [27mchmod: /shlib10/porttxt.us: No such file or directory [7m 91% [27mchmod: /shbin10/wpped: No such file or directory [7m 92% [27mchmod: /shbin10/xwpdest: No such file or directory chmod: /shbin10/wppq: No such file or directory [7m 93% [27mchmod: /shlib10/wpqerr.us: No such file or directory [7m 94% [27mchmod: /shlib10/wpqtxt.us: No such file or directory chmod: /shbin10/xwppmgr: No such file or directory [7m 95% [27mchmod: /shlib10/spelltxt.us: No such file or directory [7m 96% [27mchmod: /shbin10/xwpspell: No such file or directory [7m 97% [27mchmod: /shlib10/thestxt.us: No such file or directory chmod: /shbin10/xwpthes: No such file or directory [7m 98% [27mchmod: /shlib10/wt_icons.us: No such file or directory [7m 99% [27mchmod: /wplib/wpuxmlus.exc: No such file or directory [7m 100% [27m rm: /wpmacros/us: is a directory ln: /wpmacros//us: hard link not allowed for directory ./install.wp: /shbin10/xwpdest: No such file or directory ls: /wpbin/README*: No such file or directory [H[2J Installation Complete. Enter your installation directory: /usr/local/wp Error: Invalid Install area bash-2.03# exit exit Script done on Fri May 26 01:18:26 2000 If you made it this far, thank you for having a look. See anything that gives my problem away? Has anybody experienced this before? Thanks again. - Hénk -- [-=-=-=-=-=-=-=-=-=-=- adam j henry =-=-=-=-=-=-=-=-=-=-=] | [http: www.heidelberg.edu/~ahenry] [pgp: 0xBD168A74] | | [mailto: ahenry(a)heidelberg.edu] [icq: 69243836] | [-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=] -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

7 13

[SLE] gdm
by illusion＠4u.net 30 May '00

30 May '00

Hi I try to use gdm instead of kdm. But whenever I got the login screen from gdm, it seems dat my keyboard got lock up. Any idea how to fix this or how to use gdm properly? Thanks -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

RE: [SLE] Gateway / firewall
by Chris.Smith＠raytheon.co.uk 30 May '00

30 May '00

Hi, ** But I do pity you trying to use a P150 with M$ for a desktop. I's bad enough here with a P3-450. W2k is a snail (a dead one too). - Chris. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 1

[SLE] Print server
by h.riesbeck＠home.net 30 May '00

30 May '00

Hi all: What would be required to set up a Linux host (in my case SUSE 6.1) as a print server?. Ideally such a set up would allow Windows PCs and also the Linux host itself to access, by way of a 'private' network, one or two printers connected to the Linux host. Thank you for taking the time to reply. Heri Riesbeck -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 3

[SLE] wvdial won't auto reconnect
by ashleyg＠dnai.com 30 May '00

30 May '00

Hi again. I want wvdial to redial when my ISP cuts me off. I believe I have my wvdial.conf correct: [Dialer Defaults] . . . Auto Reconnect = true And in /etc/ppp/ioptions.YaST: . . # Do not exit after a connection is terminated; # instead try to reopen the connection. # added by Ashley 5/28/2000 persist but no redial happens. How does wvdial call pppd? Is there another script I should know about? -- -ashley One of these days I'm going to completely organize my life. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0