July 2021 - openSUSE Users - openSUSE Mailing Lists

openSUSE as FreeIPA client
by Ciro Iriarte 27 Jul '21

27 Jul '21

Hello!, Reading the documentation, I see that I could configure opensuse machines as a FreeIPA client using the stock sssd, although the ipa-client-install command is not available. I see that yast could be used (yast2-auth-client), but I would like to know if there's a non-interactive CLI tool I could use to automate the configuration. Regards, CI.-

2 3

please help: did I just ruin my ssd? mkfs.ext4: invalid blocks
by Daniel Bauer 27 Jul '21

27 Jul '21

Hello, I have a new ssd, I encrypted a partition and installed reiserfs (did that on my 15.1 system). Plugging it to my pad with 15.3 I saw that it canot handel it, and searching I found that Opensuse decided to make my backups worthless. So I plugged it again to the 15.1. used fdisk to delete the partition. made a new partition in fdisk. Wet to yast, clicked to istall an encrypted ext4 system. As after the last click the window disappeared without further notice I assumend it was done and unplugged the ssd. Received a nice message, that a process was iterrupted (and I thanked a lot to the highly itelligent programmer who closes a window without any hint about a still running process...). Ok, wanted to repeat. But Yast says it cannot istall ext4 because some cr_xxx is already here. So again fdisk, delete partition, make a new one, back to Yast, same error. So I wet the manual way (the ssd partition is sdg1): dd_rescue -m 2M /dev/urandom /dev/sdg1 cryptsetup -v --key-size 256 luksFormat /dev/sdg1 my_cryptkey-file cryptsetup luksOpen /dev/sdg1 cr_sdg1 mkfs.ext4 /dev/mapper/cr_sdg1 /dev/mapper/cr_sdg1 here I get: mkfs.ext4: invalid blocks '/dev/mapper/cr_sdg1' on device '/dev/mapper/cr_sdg1' Did I do an error? How can I get my ssd back into a virgin state, to begin from scratch? I need urgent help, because I go to travel tomorrow and must take those ssd with me, working on 15.3... Thank you very much for your help. Daniel -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com

6 12

What is this? (re zypper)
by Carlos E. R. 26 Jul '21

26 Jul '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, using Leap 15.2, I get this result using zypper, which I have never seen: minas-tirith:~ # zypper se nvme Retrieving repository 'OBS: graphics' metadata ................................................................................[done] Building repository 'OBS: graphics' cache .....................................................................................[done] Loading repository data... Reading installed packages... S | Name | Summary | Type - --+-------------------------+--------------------------------------------------------+----------- | nvme-cli | NVM Express user space tools | package | nvme-cli | NVM Express user space tools | srcpackage | nvme-cli-regress-script | A small script to test the nvme binary for regressions | package | nvmetcli | Command line interface for the kernel NVMe nvmet | package For an extended search including not yet activated remote resources you may run 'zypper search-packages' at any time. Do you want to run 'zypper search-packages' now? [yes/no/always/never] (no): yes <================ Could not search for the package: SUSE::Connect::UnsupportedOperation: Package search is not supported by the registration proxy: Alternatively, use the web version at https://scc.suse.com/packages/ No package found minas-tirith:~ # Extended search? And a SUSE URL, not openSUSE? What is this? - -- Cheers, Carlos E. R. (from openSUSE Leap 15.2 x86_64 (Minas Tirith)) -----BEGIN PGP SIGNATURE----- iJIEAREIADoWIQQt/vKEw5659AgM/X2NrxRtxRYzXAUCYPqxNxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJEI2vFG3FFjNcBu4A/R27ifofhwrmW45QCief 2hwTuM7HPUxSwsulsxiCd4hjAP0SYUH2X/uqR52+0n1nTDL+b9TPbyPoMYazs2bm wqBcaQ== =WOpN -----END PGP SIGNATURE-----

9 26

KDE connect issues?
by Markus Feilner 25 Jul '21

25 Jul '21

Anybody else suffering from KDEconnect connection problems? My phones and PCs can't connect anymore since a few weeks. I am browsing, searching, looking and am helpful for any advice/link. Thanks! -- Best Regards - Mit freundlichen Grüßen, Markus Feilner, Feilner IT - 20 years of open services - ------------------------- Agile Recursive Documentation: – Document it or it didn't happen! – ------------------------- Digitale Souveränität, Nachhaltigkeit, Dokumentation Linux, Security, Strategy, Politics, Journalism, Networking. https://www.feilner-it.net, 93059 Regensburg Wöhrdstr. 10, +49 170 302 7092 (+Signal) PGP: 40A3C306F96133067C11CFD9A958A906268C9F0A http://www.feilner-it.net/files/MFpub.asc Xing: http://www.xing.com/profile/Markus_Feilner LinkedIn: https://www.linkedin.com/in/markusfeilner @mfeilner: Matrix, Jabber, Skype, Twitter, Diaspora, ...

5 5

clawsmail problem
by mcgarrett 23 Jul '21

23 Jul '21

Recently installed ClawsMail since Thunderbird now refuses to accept any password from me. Problem: When trying to receive mail, get failure message: ERROR: Connection to pop.DESKTOP-R7/M9UON:110 failed. Can anyone tell me how to fix that, please? --doug

6 16

OT(?): viewing virtualbox or qemu VM on another host
by David T-G 23 Jul '21

23 Jul '21

Hi, all -- This is probably a VM-ish question rather than a SuSE-ish question, but since I'm running OpenSuSE I figured I could ask here to get started :-) I want to create a VM on host X and view it from my host Y desktop. All of the examples I've seen show someone working locally. Can either of these tools support running the VM "there" but viewing and interacting with it "here"? If not, is there another simple and free hypervisor that will fill the bill? I'm not particularly in love with either, not least since I have no experience; they just seem to be at the top of everyone's "virtualization for dummies" lists. I just want to run a few simple VMs, but I have neither the disk space nor the extra RAM on my little desktop to do so -- and I don't particularly want to have to get up and go to the coat^Wserver closet any time I have to access them. TIA & HAND :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt

9 10

removing Claws--another failure
by mcgarrett 20 Jul '21

20 Jul '21

I guess the lightning got me this time. YAST message: An error occurred during repository initialization. [https-download.opensuse.org-e14d6223|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Valid metadata not found at specified URL History: - [https-download.opensuse.org-e14d6223|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Repository type can't be determined. Is this fixable or must I reinstall the whole system? Agh! --doug

1 0

video rotation
by jdd＠dodin.org 19 Jul '21

19 Jul '21

Hello, When, I use my smartphone (Xiaomi Redmi Notes 9S) vertically, the resulting video file have an internal tag "rotation" that validates this orientation. but often, beginning and ending of the video are unusable (for example wrong orientation at the beginning corrected after some seconds), so I have to cut the bad part. I use avidemux in copy mode, extremely fast. but (2) avidemux remove the rotation tag and the resulting video is now horizontal I know how to rotate a video with handbrake or ffmpeg, but with recoding, long and quality loss prone. How can I just keep the rotation tag or add it to the final video? THANKS JDD -- http://dodin.org

2 3

Firefox refuses to open some links, some times.
by Carlos E. R. 19 Jul '21

19 Jul '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Firefox refuses to open some links, some times. I try to open this link I got on an email - it happens with several sites, this is just an example. https://youtu.be/qkZDn9O954U Nothing opens. I close the tab, open another tab, try again. I get a popup - see attached photo. If I clicl on "open with firefox", then I get the youtube page, but the video doesn't load - after all, it is a local file "file:///tmp/mozilla_cer0/watch" of html type. After opening a new tab several times and pasting the link, finally it opens. I am using UBlock, but also happens with Add Block Plus, or if I click disable on the current page. Most times it simply works, but a few times I hit a link that FF simply refuses to open, no message. Using Leap 15.2 and stock FF. - -- Cheers Carlos E. R. (from 15.2 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCYOQ11Bwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVylYAn0MOgeWM2DOhX5n/8QWp LBai51iUAJ9e/E6vd/sb5UPVmEWo6gAzRdLXhw== =xxuc -----END PGP SIGNATURE-----

5 10

Re: OffTopic: (sorry)..Re: I told you...
by Alec Destry 18 Jul '21

18 Jul '21

----- Original Message ----- From: "Lew Wolfgang" <wolfgang(a)sweet-haven.com> To: <users(a)lists.opensuse.org> Sent: Sunday, July 18, 2021 9:56 AM Subject: Re: OffTopic: (sorry)..Re: I told you... > On 7/18/21 5:17 AM, L A Walsh wrote: >> On 2021/06/30 13:56, Carlos E. R. wrote: >>> >>> The right wing boss of Madrid closes down 2141 hospital beds till >>> October first, while patients in the waiting list has increased in 13000 >>> people. >>> >>> I told you. The right wing intentionally makes the health service works >>> badly. Then they create private hospitals instead. >> The right-wing (Republicans) in the US have been doing this for years. >> > > < snip of biased political content > > > Wouldn't this be better discussed on the offtopic list? We'd have a > lot of fun debating all the fine points without offending anyone. > > Anyone wishing to join can send an email to: > > offtopic-join(a)lists.opensuse.org > > Regards, > Lew > "Wouldn't this be better discussed on the offtopic list? We'd have a lot of fun debating all the fine points without offending anyone." --> I'll second that.

1 0

I told you...
by Carlos E. R. 18 Jul '21

18 Jul '21

The right wing boss of Madrid closes down 2141 hospital beds till October first, while patients in the waiting list has increased in 13000 people. I told you. The right wing intentionally makes the health service works badly. Then they create private hospitals instead. https://www.elsaltodiario.com/coronavirus/ayuso-cierra-mas-de-2000-camas-es… Meanwhile, Madrid is vaccinating 24 hours a day. Yes, nights too. They have a million vaccines not used. And, they are going to use private companies next to inject them. They are that inept. -- Cheers / Saludos, Carlos E. R. (from openSUSE 15.2 (Legolas))

7 9

Re: Sound card configuration problem
by Wolfgang Mueller 16 Jul '21

16 Jul '21

On Mon, 28 Jun 2021 at 16:28:56 +0200, Masaru Nomiya wrote: > Wolfgang Mueller <wm(a)ariannuccia.de> has written: >> On Mon, 28 Jun 2021 at 11:54:21 +0200, Masaru Nomiya wrote: >>> Wolfgang Mueller <wm(a)ariannuccia.de> has written: >>>> I recently installed Leap 15.3 on my computers "hp" and "se". >>>> >>>> Configuring the sound cards by yast worked on "se" only, >>>> whereas on "hp" the following error message appears: >>>> ================================================================= >>>> An error occurred during the installation of >>>> >>>> GP107GL High Definition Audio Controller >>>> >>>> The kernel module snd-hda-intel for sound support >>>> could not be loaded. This can be caused by incorrect >>>> module parameters, including invalid IO or IRQ parameters. >>>> ================================================================== >>>> The same for the other sound card, called "Cannon Lake PCH cAVS". >>>> >>>> How can I correct the kernel module snd-hda-intel and provide >>>> the correct module, IO, or IRQ parameters? >>> >>> These will help you. >>> >>> https://github.com/spotify/linux/blob/master/Documentation/sound/alsa/ALSA-… >>> >>> https://github.com/spotify/linux/blob/master/Documentation/sound/alsa/HD-Au… >> >> The first of these two sites contains a section entitled "Module >> snd-hda-intel". However, it tells me neither where to find this >> module, nor how to include it in the kernel. Do you have an idea? Thank you for your reply, Masaru. > snd-hda-intel is a kernel module which is this: > /lib/modules/[kernel-version]-default/kernel/sound/pci/hda/snd-hda-intel.ko On my computer it is /lib/modules/5.3.18-59.5-default/kernel/sound/pci/hda/snd-hda-intel.ko.xz which has to be unpacked by "unxz". This file is the same than that on my computer "se", where setting up the sound cards has been possible. > To get the sound card's information, execute: > > $ /usr/sbin/alsa-info.sh --with-devices > > This produces the file 'alsa-info.txt.XXXXX' on /tmp folder. > In it, you can get the information for setting up. It contains a lot of information, but no hint how to set up my sound cards. Please have a look on the file attached below. Best regards, Wolfgang

7 35

two patches still not applicable: SUSE-2020-3304 , SUSE-2021-985
by cagsm 15 Jul '21

15 Jul '21

leap 15.3, upgraded from 15.2 zypper lp still lists Loading repository data... Reading installed packages... Repository | Name | Category | Severity | Interactive | Status | Since | Summary -------------------------------------------------------------+----------------+-------------+----------+-------------+--------+-------+--------------------------------------------- Update repository with updates from SUSE Linux Enterprise 15 | SUSE-2020-3304 | recommended | moderate | --- | needed | - | Recommended update for i2c-tools Update repository with updates from SUSE Linux Enterprise 15 | SUSE-2021-985 | recommended | moderate | --- | needed | - | Recommended update for the Azure SDK and CLI Found 2 applicable patches: 2 patches needed (0 security patches) but trying to install them sudo zypper in -t patch SUSE-2021-985 Loading repository data... Reading installed packages... 'patch:SUSE-2021-985' is already installed. Resolving package dependencies... Nothing to do. sudo zypper in -t patch SUSE-2020-3304 Loading repository data... Reading installed packages... Resolving package dependencies... Problem: the to be installed patch:SUSE-2020-3304-1.noarch conflicts with 'libi2c0.x86_64 < 4.0-4.3.2' provided by the installed libi2c0-4.0-bp153.2.13.x86_64 Solution 1: Following actions will be done: deinstallation of libi2c0-4.0-bp153.2.13.x86_64 deinstallation of i2c-tools-4.0-bp153.2.13.x86_64 Solution 2: do not install patch:SUSE-2020-3304-1.noarch Choose from above solutions by number or cancel [1/2/c/d/?] (c): ^C rpm -aq | grep i2c i2c-tools-4.0-bp153.2.13.x86_64 libi2c0-4.0-bp153.2.13.x86_64 How do I finally settle this mess? Can i remove the packages somehow and force to install them funamentally as whole from the repos immediately installing the latest bits without the patch routine or something? I dont remember ever having seen any azure related stuff on my opensuse systems in the past, i dont use or need or want azure? when is 15.3 actually being considered final and settled when leap 15.2 users have had and are still having these fundamental problems due to the upgrade to 15.3? is 15.3 always gonna be a second class citizen? is this to be expected for 15.4 or whatever comes next? i was really irritated and disappointed when like still within the final hours of the 15.3 release the mailing-list already showed that feature lock down for 15.4 was already being done within days. I kind of already feel the next faily stages and procedures and situations incoming for 15.4 over again. I have not yet dared and attampted to upgrade my 15.2 systems so far, when this very simple and most basic 15.2 test system expressed so many woes and bugs with the upgrade to 15.3 already :( ty

3 4

Display (login) manager for XFCE and Wayland
by Jeffrey Taylor 14 Jul '21

14 Jul '21

AFAICT, XFCE uses GTK and I see GTK Wayland libraries installed. I'm currently using LightDM. What Display Manager would allow me to try out Wayland with XFCE? TIA, Jeffrey

3 2

Suddenly, laptop refuses to hibernate.
by Carlos E. R. 12 Jul '21

12 Jul '21

Hi, Suddenly, laptop refuses to hibernate. I haven't done any update or change. minas-tirith:~ # systemctl hibernate Failed to hibernate system via logind: Sleep verb not supported minas-tirith:~ # It has been working since ever. Today 2 or three times. minas-tirith:~ # uptime 02:28:41 up 4 days 13:29, 1 user, load average: 1.29, 1.29, 1.16 minas-tirith:~ # Guess: not enough swap available, so I have closed firefox. -- Cheers / Saludos, Carlos E. R. (from oS Leap 15.2 x86_64 (Minas Tirith))

5 7

Cannot start KDE
by Wolfgang Mueller 12 Jul '21

12 Jul '21

On my new HP 15s-eq2147, because of the lack of an ethernet connection, installing Leap 15.3 from openSUSE-Leap-15.3-NET-x86_64.iso was impossible. So, I had to use openSUSE-Leap-15.3-DVD-x86_64.iso, which does not use internet repositories. Installing was easy and much faster than from the net, but at the end, KDE did not appear. Pressing F7 shows a black screen only. Then I tried "startx", but in vain. I have stored the output on http://ariannuccia.de/temp/startx.txt and the content of ~/.local/share/xorg/Xorg.0.log on http://ariannuccia.de/temp/Xorg.0.log. Please have a look at these two files. Do they contain information for correcting the KDE implementation? Meanwhile I have access to the internet, thanks to Stephan Hemeier's rtw88-kmp-default-git20210702_k5.3.18_57-lp153.2.2.x86_64.rpm, but I don't know which package to install for making KDE run. Thanks in advance, Wolfgang

8 18

15.2 to 15.3 Where is klogconsole
by Mark Hounschell 12 Jul '21

12 Jul '21

Why has klogconsole been removed from the util-linux rpm in 15.3? Is there a replacement? Regards Mark

3 4

OpenSUSE Tumbleweed equivalent of /etc/init.d?
by Simon Connah 12 Jul '21

12 Jul '21

Hi, I'm trying to install VMWare Workstation Pro 16 onto my Tumbleweed system, and the installer is asking for the location of system scripts. I'm not entirely sure where that location is on Tumbleweed. Can someone point me in the right direction, please? Thank you. Simon.

4 6

Upgrade to LEAP 15.3 for production servers?
by Simon Connah 11 Jul '21

11 Jul '21

Hi, I was wondering if anyone here had already upgraded production servers to LEAP 15.3 from LEAP 15.2? Have all the initial release bugs been squashed? I don't do anything super complex with my servers, but I don't mind waiting for some outstanding problems to be fixed. Any advice? Simon.

2 3

Update announcements -- Leap 15.3
by Darryl Gregorash 11 Jul '21

11 Jul '21

Why do I keep seeing updates announced in the list, when zypper lu says there is nothing to install? I just got a dump of 34 of them, maybe 50, and out of all that, all I needed was an update to X. (And no, it's not because I don't have those packages installed.) It's also amusing to see a security update for Thunderbird to: > MozillaThunderbird-78.10.2-8.27.1 when current installed version is: > MozillaThunderbird-78.11.0-8.30.1.x86_64

2 1

Cannot install 15.3 on Acer Aspire 3
by Wolfgang Mueller 10 Jul '21

10 Jul '21

Today I bought a laptop with the following specifications: Acer Aspire 3 (A317-52-30X0) 17,3" FHD IPS, i3-1005G1, 8GB RAM, 512GB SSD, Linuxs Then I inserted the USB stick, which I had made bootable using openSUSE-Leap-15.3-NET-x86_64.iso, i.e. for installation from network, and switched the computer on. Now, with the appropriate choice in the bios and the selection of "Installation", it boots and loads the online repositories. Then it asks for the "System Role": I select "Desktop with KDE Plasma". Afterwards "Suggested Partitioning" appears; but I choose "Expert Partitioner" --> "Start with Existing Partitions". Then a table appears: > Device Size F Enc Type Label Mount Point > sda 7.84GiB usb 0x058f-Spaceloop 8GB > sda1 3.45MiB EFI System-Partition-Partition > sda2 142.42MiB ISO 9660 Partition openSUSE-Leap-15.3-NET-x86_64160 Now, when I try to add a partition, it shows a limit of 7.7GiB, i.e. 7.84GiB of the USB stick minus space for sda1 and sda2 (see table above). So, I am offered the USB stick for partitioning, which makes no sense because I want to partition the hard disk of 512GiB. How can I get access to the hard disk? Thank you in advance, Wolfgang

7 25

Updates are not posted to lists 'openSUSE Security Announce' or 'openSUSE Updates' atm
by Martin Waleczek 09 Jul '21

09 Jul '21

Hi, since monday there have not been any updates to both https://lists.opensuse.org/archives/list/updates@lists.opensuse.org/ https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.o… Did someting break? Cheers martin

6 9

[support] sleep/suspend/hibernate don't
by Felix Miata 08 Jul '21

08 Jul '21

This PC is my brother's, originally installed 24 months ago by myself with 15.1. He claims sleep/hibernate used to work before the upgrade to 15.2, and now 15.3. He wants hibernate/sleep to work again. So far, I haven't found the secret to success. # inxi -Fxzy System: Kernel: 5.3.18-lp152.41-default x86_64 bits: 64 compiler: gcc v: 7.5.0 Desktop: KDE Plasma 5.18.6 Distro: openSUSE Leap 15.3 Machine: Type: Desktop Mobo: ASRock model: N68C-GS FX serial: N/A BIOS: American Megatrends v: P1.40 date: 10/31/2012 CPU: Info: 6-Core model: AMD Phenom II X6 1055T bits: 64 type: MCP arch: K10 rev: 0 cache: L2: 3 MiB flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 33754 Speed: 803 MHz min/max: 800/2800 MHz boost: enabled Core speeds (MHz): 1: 803 2: 1470 3: 804 4: 1772 5: 1667 6: 1675 Graphics: Device-1: NVIDIA C61 [GeForce 7025 / nForce 630a] vendor: ASRock driver: nouveau v: kernel bus-ID: 00:0d.0 Display: x11 server: X.Org 1.20.3 driver: loaded: modesetting unloaded: fbdev,vesa resolution: 1680x1050~60Hz OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.2.4 direct render: Yes Audio: Device-1: NVIDIA MCP61 High Definition Audio vendor: ASRock driver: snd_hda_intel v: kernel bus-ID: 00:05.0 Sound Server-1: ALSA v: k5.3.18-lp152.41-default running: yes Sound Server-2: PulseAudio v: 14.2-rebootstrapped running: no Sound Server-3: PipeWire v: 0.3.24 running: no Network: Device-1: NVIDIA MCP61 Ethernet vendor: ASRock 939NF6G-VSTA Board type: network bridge driver: forcedeth v: kernel port: e080 bus-ID: 00:07.0 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> Drives: Local Storage: total: 111.79 GiB used: 204.73 GiB (183.1%) ID-1: /dev/sda vendor: A-Data model: SU650 size: 111.79 GiB Partition: ID-1: / size: 17.18 GiB used: 9.41 GiB (54.8%) fs: ext4 dev: /dev/sda3 ID-2: /home size: 51.45 GiB used: 14.53 GiB (28.2%) fs: ext4 dev: /dev/sda5 Swap: ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) dev: /dev/sda2 Sensors: System Temperatures: cpu: 33.5 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 191 Uptime: 1h 16m Memory: 3.59 GiB used: 816 MiB (22.2%) Init: systemd runlevel: 5 Compilers: gcc: N/A Packages: 2580 Shell: Bash v: 4.4.23 inxi: 3.3.04 The BIOS doesn't have any setting labeled S1 or S3, but the ACPI setting it does have that Google says equates to S3 is enabled. To generate the following, I first booted to multi-user, logged in as root, then issued systemctl start systemd-suspend. The response was no different that I could tell than by selecting sleep or hibernate from Plasma's Power/Session menu. # dmesg https://paste.opensuse.org/99478212 # journalctl -b https://paste.opensuse.org/10906426 My search fu is fubar again. I was sure there was recent discussion about this subject either on a mailing list or on the forums, but I'm not finding it. Is there anything in the two logs to explain why an attempt to suspend or hibernate results either in: 1-several seconds of black screen without a poweroff, then all coming back as if resume had been intentionally triggered, or 2-several seconds of black screen without a poweroff, then all coming back as if screenlocker had been triggered, or 3-reboot Does anyone know of some bug that needs a workaround, or a fix or config change required? Is this supposed to be controllable via YaST? The only place I see power control settings are in Plasma's systemsettings, where screen energy saving and suspend session are enabled, but the other three checkboxes (including button events) not. -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

4 8

15.2 - keepassxc - Bad Solver - requires removal of keepassx 0.4xx (no actual conflict)
by David C. Rankin 08 Jul '21

08 Jul '21

All, The .spec for keepassxc has a problem. It refuses to install keepassxc unless the user removes keepassx 0.4.x. That is unneeded. There is no actual conflict and it is ridiculous for the package to insist on removal of a prior competing version. Why was this new forced deprecation added? -- David C. Rankin, J.D.,P.E.

2 1

What are the default repositories in a brand new OpenSUSE TW install?
by Simon Connah 07 Jul '21

07 Jul '21

Hi, I tried to remove a repo using zypper, which I didn't want, and I think I might have accidentally removed an official one. Can anyone give me a list of all the repos I should have from a default TW install, please? Thank you. Simon.

2 2