October 2020 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Bug in usb drivers? "Not enough bandwidth for new device state"
by Markus Egg 28 Feb '22

28 Feb '22

SuSE Tumbleweed with newest updates and upgrades. 5.7.1-1-default #1 SMP Wed Jun 10 11:53:46 UTC 2020 (6a549f6) x86_64 x86_64 x86_64 GNU/Linux Just recently started to give error messages when plugging in e.g. USB Headsets, Arduino Uno into some Exsys USB 3.0 hub. This was working fine in Tumbleweed before and in e.g. SuSE 13.1. The error message is e.g.: [...]usb 2-1.4.3: new full-speed USB device number 10 using xhci_hcd [...]usb 2-1.4.3: New USB device found, idVendor=2341, idProduct=0043, bcdDevice= 0.01 [...]usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [...]usb 2-1.4.3: Manufacturer: Arduino (www.arduino.cc) ...serialnumber... [...]kernel: usb 2-1.4.3: Not enough bandwidth for new device state. [...]kernel: usb 2-1.4.3: can't set config #1, error -28 This error message started on Jun 04, after making an update (zypper up) on June 3rd. A USB3.0 stick is working on the Exsys Hub. The Arduino is working on some other USB 3.0 Port of another hub. Regression? Any hints how to get this away? Found only another occurrence of this bug: http://opensuse92.rssing.com/chan-20813128/all_p1407.html Best regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171) So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] libc segfaults attaching an iPad
by Dave Howorth 26 Mar '21

26 Mar '21

I just tried to attach an iPad to my openSUSE 15.0 system, via USB. I think I've done it before, but this time it fails. Dmesg has: [9787970.148053] usb 3-9: new high-speed USB device number 96 using xhci_hcd [9787970.302089] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a2 [9787970.302091] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [9787970.302092] usb 3-9: Product: iPad [9787970.302093] usb 3-9: Manufacturer: Apple Inc. [9787970.302094] usb 3-9: SerialNumber: c4088xxxxxserialxredacted [9787971.044264] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [9787991.101146] pool[16789]: segfault at 0 ip 00007f6ada593ef1 sp 00007f6ad6203bd8 error 4 in libc-2.26.so[7f6ada43a000+1b1000] Anybody have any idea what the problem is? Thanks, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Raid, Raid6, what file system for good fault tolerance?
by cagsm 21 Dec '20

21 Dec '20

Hi list, speaking about software raid, not hardware controller based. I am trying to go for some local OpenSuse machine and adding some storage to it. Was considering Raid6, and now reading about a bit and people left and right scaremongering about the larger the disks these days in the double digit terabyte capacities even, the more likely it is that during a reconstruction of a raid subsequent errors would occur. I would absolutely like to keep my data consistent, and I am not thinking about double digit terabytes either, would stick to 2TB or 4TB disks, with Raid6 thats at least 4 physical drives. Now I am wondering if it possible to use a good robust file system that can add some more parity or check blocks or redundancy on top of the hardware disks, to absolutely be able to always read my data. I can't add multiple machines or like those high availability stuff like clusters and what not I read about DRBD (Distributed Replicated Block Device), or maybe I am just too scared by those technical terms or consider myself to be just a simpleton and wanting to keep it rather simple. My use case here is also not constant availablity, when a disk needs to be replaced, so be it, but I don't want to lose my data that I can not ever read certain parts of it again or such stuff. The thing that came to my mind was, if there is some file systems that would add redundancy and robustness onto the mdraid system of the linux kernel? Anyone with some useful insights? Roughly speaking, I was considering some simple pcie esata interfaced controller card and an external case enclosure with esata port and portmulitplier stuff inside, that can present at least 4 physical disks as JBOD, just a bunch of disks, so that the Linux can seem them all separately. Speed and rebuild times are not my concern, but data persistence and data integrity. Not even number of physical disks, I could live with even one of those 8 bay device enclosures and cases that are out there on the market. Thanks for any help and hints. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 23

[opensuse] Fw: [Bug 1128204] retext crashes with core dump
by Dave Howorth 15 Nov '20

15 Nov '20

Hmm, I just got this message from Atri, who I've seen looks at this list. I haven't migrated my bugzilla account because I don't want to continue to use the old account name. I just tried to respond and it wants details I cannot supply (I don't know what username/password are - I've never needed them - my browser supposedly knows them but apparently can't reproduce whatever information is required to respond to the 'migration portal') But more fundamentally, I don't use TW. I use Leap and I'm still on 15.0. Begin forwarded message: Date: Sun, 07 Jun 2020 19:16:08 +0000 From: bugzilla_noreply(a)suse.com To: ********* Subject: [Bug 1128204] retext crashes with core dump http://bugzilla.suse.com/show_bug.cgi?id=1128204 http://bugzilla.suse.com/show_bug.cgi?id=1128204#c11 --- Comment #11 from Atri Bhattacharya <badshah400(a)gmail.com> --- Sorry Dave, I missed the train on this one. Can you still reproduce this with the latest TW? -- You are receiving this mail because: You are on the CC list for the bug. You reported the bug. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Simple html editor?
by Carlos E. R. 11 Nov '20

11 Nov '20

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have not done this in ages, so is there a simple html editor (WYSIWYG)? I think I used one long ago, blue something perhaps. My start menu suggests seamonkey composer, that's heavy. I just need descriptive text and clickable links. I know I can do this in plain text, but I wonder at something WYSIWYG. Similar to composer, but simpler/smaller. - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCX5xk3Bwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVqQEAn0cR05oKxnllR/0LEE3X C1UpRHxaAJwPmkQZWPHbDGmtnJqKqtxtzD0KHA== =rRxy -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 40

[opensuse] YouTube-dl removed from GitHub after RIAA DMCA notice
by Felix Miata 02 Nov '20

02 Nov '20

<https://www.bleepingcomputer.com/news/software/youtube-dl-removed-from-gith…> It's still in the 15.1, 15.2 & TW repos. -- Evolution as taught in public schools, like religion, is based on faith, not on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 14

[opensuse] My apache does not start.
by Carlos E. R. 01 Nov '20

01 Nov '20

Hi, My apache2 does not start (Leap 15.2). I get: Telcontar:~ # systemctl status apache2 ● apache2.service - The Apache Webserver Loaded: loaded (/usr/lib/systemd/system/apache2.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2020-10-30 22:25:47 CET; 4s ago Process: 29503 ExecStart=/usr/sbin/start_apache2 -DSYSTEMD -DFOREGROUND -k start (code=exited, status=1/FAILURE) Main PID: 29503 (code=exited, status=1/FAILURE) Oct 30 22:25:47 Telcontar systemd[1]: Starting The Apache Webserver... Oct 30 22:25:47 Telcontar start_apache2[29503]: httpd-prefork: Syntax error on line 210 of /etc/apache2/httpd.conf: Syntax error on line 119 of /etc/apache2/default-server.conf: Syntax error on line 15 of /etc/apache2/conf.d/cacti.conf: Expected </DirectoryMatch> but saw </Directory> Oct 30 22:25:47 Telcontar systemd[1]: apache2.service: Main process exited, code=exited, status=1/FAILURE Oct 30 22:25:47 Telcontar systemd[1]: Failed to start The Apache Webserver. Oct 30 22:25:47 Telcontar systemd[1]: apache2.service: Unit entered failed state. Oct 30 22:25:47 Telcontar systemd[1]: apache2.service: Failed with result 'exit-code'. I understand it flags an error in file "/etc/apache2/conf.d/cacti.conf", which is a distribution file. <IfDefine CACTI> <================= <IfModule mod_alias.c> Alias /cacti /srv/www/cacti </IfModule> <Directory /srv/www/cacti> For the moment, I'm uninstalling cacti. Apache runs again. -- Cheers / Saludos, Carlos E. R. (from 15.1 x86_64 at Telcontar)

8 44