June 2019 - openSUSE Users - openSUSE Mailing Lists

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[opensuse] Project management software question for project managers
by Ted Byers 15 Apr '24

15 Apr '24

I am looking for project management software I can install on my Suse box. Alas, there are quite a number of prducts that claim to be suitable project management products, but I am hoping to obtain a little help separating the wheat from the chaffe. Basically, when I open the project management software, I want to be able to choose from among a number of projects that are under way, and then see the relation between a client's wish list and the functional requirements specs, and then how these specs relate to the UML diagrams that have been created, and from there, what tasks have been defined for each requirement and the identity of all persons involved, the developers and their managers, and the person who designed the code that supports the requirement. And with that, I want to be able to see the project's timeline, the related bugs, &c. I would even want to be able to open the source code files and examine the code that was actually written. Here is my wish list: 1) a web application that stores data in either PostgreSQL or MySQL. 2) easy integration with UML tool (or has it's own UML tool that supports round trip engineering) 3) resource management (e.g. computers, and development tools, that can be used, personelle assigned to each task) 4) documentation of relation between functional requirements specs to specific tasks and specific unit and integration tests. 5) time/effort tracking 6) bug tracking, including data relating the existance of the bug, and effort required to fix it, to the person who wrote the original code, the person who supervised him or her, and the person who designed the 'feature' in question, the time taken to complete the original task, and the technologies used (to imprrove accountability as well as to determine retraining and continuing education needs (people aren't disposable, so instead of taking a harsh aproach to problems identified, I prefer to use education as a corrective, but I can't design corrective instruction without knowing precisely what the need is). I also need to know if a developer has a higher than normal bug rate simply because he doesn't take enough time to ensure the job is done right, or because I haven't adequately trained him, or because of a poor choice of tools, or somethng else that may be my fault. 7) use of task effort tracking history to generate provisional effort/cost estimates from new project's functional requirements 8) easy integration with open source ERP products like OFBiz (which may make trakcing resources and manpower easier, as well as connect real production data to the enterprise's accounting systems) 9) easy integration with CMS products, like Wordpress (especally for production documentation, includng degin documentation and user guides and reference manuals) 10) easy integration with verion control systems such as subversion. If there is a decent product that supports all of this, great (and language used to implement it doesn't matter), but if I have to write code to add missing requirements, then I am limited to those implemented using Perl or Java (and running on Tomcat). I don't know PHP well enough, and I don't know Ruby at all; and I really don't want to think about implementing this sort of thing in C++ (though I could if absolutely necessary). If you have project management experience, and use tools that are available for Suse Linux, what software product(s) did you use, and with what result? While I await relies, I will continue to review web documentation for those products I have found so far, to see if any of them are a) suitable for use in production and b) to see to what extent they support the features I am after. I have seen a number of products so far in my search, that deserve to be nameless, because they provide no way to relate cost estimates to one's team's track record, or to the details of the design, and seem satisfied with production of a pretty gantt chart (which is why I have formed the view that there is a whole lots of chaffe in the set of applications that call themselves project menement software - I have yet to find anything that really has the potential of being labelled wheat). Thanks Ted -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171). So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] libc segfaults attaching an iPad
by Dave Howorth 26 Mar '21

26 Mar '21

I just tried to attach an iPad to my openSUSE 15.0 system, via USB. I think I've done it before, but this time it fails. Dmesg has: [9787970.148053] usb 3-9: new high-speed USB device number 96 using xhci_hcd [9787970.302089] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a2 [9787970.302091] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [9787970.302092] usb 3-9: Product: iPad [9787970.302093] usb 3-9: Manufacturer: Apple Inc. [9787970.302094] usb 3-9: SerialNumber: c4088xxxxxserialxredacted [9787971.044264] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [9787991.101146] pool[16789]: segfault at 0 ip 00007f6ada593ef1 sp 00007f6ad6203bd8 error 4 in libc-2.26.so[7f6ada43a000+1b1000] Anybody have any idea what the problem is? Thanks, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Raid, Raid6, what file system for good fault tolerance?
by cagsm 21 Dec '20

21 Dec '20

Hi list, speaking about software raid, not hardware controller based. I am trying to go for some local OpenSuse machine and adding some storage to it. Was considering Raid6, and now reading about a bit and people left and right scaremongering about the larger the disks these days in the double digit terabyte capacities even, the more likely it is that during a reconstruction of a raid subsequent errors would occur. I would absolutely like to keep my data consistent, and I am not thinking about double digit terabytes either, would stick to 2TB or 4TB disks, with Raid6 thats at least 4 physical drives. Now I am wondering if it possible to use a good robust file system that can add some more parity or check blocks or redundancy on top of the hardware disks, to absolutely be able to always read my data. I can't add multiple machines or like those high availability stuff like clusters and what not I read about DRBD (Distributed Replicated Block Device), or maybe I am just too scared by those technical terms or consider myself to be just a simpleton and wanting to keep it rather simple. My use case here is also not constant availablity, when a disk needs to be replaced, so be it, but I don't want to lose my data that I can not ever read certain parts of it again or such stuff. The thing that came to my mind was, if there is some file systems that would add redundancy and robustness onto the mdraid system of the linux kernel? Anyone with some useful insights? Roughly speaking, I was considering some simple pcie esata interfaced controller card and an external case enclosure with esata port and portmulitplier stuff inside, that can present at least 4 physical disks as JBOD, just a bunch of disks, so that the Linux can seem them all separately. Speed and rebuild times are not my concern, but data persistence and data integrity. Not even number of physical disks, I could live with even one of those 8 bay device enclosures and cases that are out there on the market. Thanks for any help and hints. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 23

[opensuse] Issue with smartd
by Carlos E. R. 21 Oct '20

21 Oct '20

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have one disk that is giving me problems with the smartd daemon. I get this in the log: <3.6> 2018-10-21T13:45:23.829155+02:00 Isengard smartd 1173 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T13:45:24.483719+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2018-10-21T13:45:24.484570+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB <3.6> 2018-10-21T13:45:24.503334+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not found in smartd database. <3.6> 2018-10-21T13:45:24.525071+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Attribute Autosave. <3.6> 2018-10-21T13:45:24.530486+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Automatic Offline Testing. <3.6> 2018-10-21T13:45:24.535003+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2018-10-21T13:45:24.535627+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T13:45:24.880219+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T14:15:25.233525+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 147 to 144 <3.6> 2018-10-21T15:45:31.681938+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2018-10-21T15:45:33.632399+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2018-10-21T16:15:24.678100+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2018-10-21T18:15:31.767150+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2018-10-21T18:15:33.717688+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2018-10-21T18:45:24.587304+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email It intermitently but periodically fail to read atributes, triggering hundreds of emails sent to me to warn of the problem: +++------------ Subject: SMART error (FailedReadSmartData) detected on host: Isengard This message was generated by the smartd daemon running on: host name: Isengard DNS domain: valinor The following warning/error was logged by the smartd daemon: Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data Device info: WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another message will be sent in 24 hours if the problem persists. - ------------++- The disk is indeed smart capable and it works fine, as long as I call smartctl with "-d sat,16", which I do: Isengard:~ # smartctl --test=short -d sat,16 /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sun Oct 21 13:50:18 2018 Use smartctl -X to abort test. Isengard:~ # Isengard:~ # smartctl --health -d sat,16 /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Isengard:~ # It is crucial to use "-d sat,16" or it fails: Isengard:~ # smartctl --health /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0: Unknown USB bridge [0x1058:0x25ee (0x4004)] Please specify device type with the -d option. Use smartctl -h to get a usage summary Isengard:~ # Of course I use that option on the config: Isengard:~ # cat /etc/smartd.conf | egrep -v "^[[:space:]]*$|^#" /dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/wwn-0x5000000000000001 -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/wwn-0x5000c5009399305f -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d sat,16 -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor Isengard:~ # What else am I missing? Is smartd not using "-d sat,16" somewhere else? Is it some other problem? Isengard:~ # rpm -q smartmontools smartmontools-6.6-135.1.x86_64 Isengard:~ # - -- Cheers Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlvM5UMACgkQtTMYHG2NR9WCwQCePjOt8PSMKsx6DwSe9bZJRhHf 2lQAn02eBTrtfAqmEg5ydZVagvMfW2r6 =eIzR -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] Epson Inkjet Printer can't connect
by Doug McGarrett 13 Aug '19

13 Aug '19

Re: Tumbleweed: I have an Epson WP-4530 all-in-one printer/copier/scanner. The Driver is available in /usr/etcetera, and Yast claims to have installed it, and if I try to print something, the Epson is shown as a choice, but nothing happens. If I try to use XSane, a message tells me it can't find a device. Meanwhile, an HP LaserJet Pro is found and prints perfectly. But it can't scan or print in color. I've gotten used to Tumbleweed and I like it, but why won't it print? All help appreciated! --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] 15.1 LXQt - what camera app/picture viewer
by Felix Miata 14 Jul '19

14 Jul '19

PhotoQT opens to black screen with a very generic looking panel icon, and no discernable way to open any images or camera. LXImage seems too simple, no apparent way to get pix from a Camera. YaST2 doesn't make it too easy to find a Camera app, at least, not a non-GTK-based one. KDE's Digikam requires KF5Contacts, which seems like an address book thingie I shouldn't need to have cluttering this simple installation. Any suggestions? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 44

[opensuse] systemd - spamd.service: Start operation timed out. Terminating.
by Per Jessen 06 Jul '19

06 Jul '19

I'm trying to start spamd on Leap 15.1 - somehow systemd does not recognise it has been started and then kills it. # systemctl cat spamd [snip] [Service] Type=forking PIDFile=/var/run/spamd.pid ExecStartPre=/bin/bash -c "sa-update || true" EnvironmentFile=-/etc/sysconfig/spamd ExecStart=/usr/sbin/spamd $SPAMD_ARGS -r /var/run/spamd.pid ExecReload=/usr/bin/kill -HUP $MAINPID Seems to me the pidfile is fine ? -- Per Jessen, Zürich (29.0°C) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 37

[opensuse] Leap + Tumbleweed + boot partition
by Stephen Berman 06 Jul '19

06 Jul '19

I bought a computer with Leap 15.0 preinstalled on an SSD, and I also wanted to install Tumbleweed on the disk. For reasons detailed below, I did this without installing a bootloader for Tumbleweed, but since Tumbleweed is frequently updated, including grub2, I think it would be better to install the bootloader in Tumbleweed. Due to my lack of knowledge, I would be grateful for advice on how to do that safely. Some specifics follow about the disk and what I did to install Tumbleweed. The SSD had three partitions: /boot, / (root) and swap. I shrank the root partition (formatted as ext4) and added a btrfs partition for Tumbleweed. I first left /boot and swap as is, but the Tumbleweed installer said there was no bootable partition (I don't remember the exact wording, something like no BIOS boot table). I then tried deleting the /boot partition and adding it again, selecting "BIOS Boot" as the partition ID, but the installer still said there was no bootable partition. I also tried different file systems to format /boot -- originally it was FAT and I also tried XFS and ext3 -- but that made no difference. So finally, I left the /boot partition unchanged but unmounted it and proceeded with the installation. At the summary I then changed the boot setup to prevent any boot loader being installed and any changes made to the MBR. The installer said I might end up with an unbootable system, but I went ahead anyway. The installation completed and on rebooting the boot screen showed only Leap 15.0 as before, but after running grub2-mkconfig in Leap, Tumbleweed was found and I could boot it and it seems to be fine. The disk has GPT with protective MBR. As noted the /boot partition is formatted as FAT and also contains a directory efi, which is populated in the running Leap, which mounts /boot/efi, but in the running Tumbleweed, where /boot is not a separate partition, after mounting the partition Leap sees as /boot/efi, the efi directory is empty (in the running Tumbleweed). I do not plan to install any MS-Windows system, but I do plan to install other Linux-based systems besides Tumbleweed, and possibly a *BSD system. How can I install the bootloader in Tumbleweed -- either from the currently installed Tumbleweed or by reinstalling it -- without risking making both Tumbleweed and Leap unbootable? If that requires deleting the existing /boot partition and add it anew, is it necessary, given the systems I plan to install, to have the efi directory, and if so, do I just have to make /boot/efi a mountpoint, and if not, what else to I need to do to make sure it exists and gets populated as required (if it's required)? And if the efi directory is not needed, what would be the recommended file system for the boot partition? I also have a question concerning having a separate /boot partition shared by Leap, Tumbleweed and any other systems I install: in each system the directory /boot contains versioned files of the kernel, config, etc., but there are also symlinks vmlinuz and initrd pointing to the latest version installed in the system; if Leap and Tumbleweed (and other Linux-based systems) populate the same /boot directory, the last one installed would override existing symlinks, so I don't see how this can work. Is it possible for different systems to use the same /boot directory, installed on a separate partition, and if not, where do the files used for booting different systems need to go, when a separate /boot partition is used? Thanks, Steve Berman -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 62

[opensuse] Mouse middle button
by sysek 01 Jul '19

01 Jul '19

Hello to everyone again. Dunno if I can write here with problems, but I didn't find any solutions anywhere. I have openSuSE 15.1 with xfce4 but I have no idea why the middle button doesn't work in Linux. I tested mouse with work laptop (Windows 10) and works. On my personal PC doesn't. I know that maybe silly but for me is very annoying. Maybe some met with that problem and can help? -- Cheers, MM -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 14

[opensuse] Blender git builds for TW
by Hans-Peter Jansen 27 Jun '19

27 Jun '19

Hi, just in case, you care, as my son does, I'm building the current git version of Blender here: https://build.opensuse.org/package/show/home:frispete:blender/blender-git It's updated every few days, as time permits. Cheers, Pete -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] save installed packages for reinstall
by Patrick Shanahan 26 Jun '19

26 Jun '19

I am considering wiping my main system drive and reinstalling Tw clean but would like to have the same packages on the new system. I will backup home and replace the new home contents with the backedup data. is this feasible? how to save the currently installed pkgs for reinstall? and yes, btrfs for entire system. thoughts? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 26

[opensuse] ZoneMinder
by Dave Howorth 25 Jun '19

25 Jun '19

Does anybody use ZoneMinder? I'm thinking of buying some cameras for security and using ZM to control and monitor them. I'm hoping that is a sane idea. I'm planning to store motion-activated video clips locally at the camera and on disks somewhere in my and my friends' networks. I see there is an experimental release for Tumbleweed but only community releases for Leap. There are a couple of home repositories, and one (monex) seems to have conflicting ideas about what is stable vs unstable depending on what version of openSUSE you are running. Do either monex or ecos read this list? Or am I better downloading the source and building it myself? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 33

[opensuse] Annoying "feature"
by James Knott 25 Jun '19

25 Jun '19

OpenSUSE has a very annoying "feature" where sometimes when I move the mouse, I see a bunch of little windows scattered around the screen. It there anyway to turn this off? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] Which kernel use?
by sysek 24 Jun '19

24 Jun '19

Hi, A few days ago I found article about 'Which kernel use in Linux distribution' but I can't find that again, so I just started to thinking, which kernel can I use to not break the system. On kernel.org there's a LTS kernel which version is 4.19.55 or 4.14.129 but in openSUSE Leap 15.1 is 4.12.14 and as I assume the newest modules(?), drivers(?) are included as a backport right? If I'm wrong do not hesitate to correct me. -- Cheers, MM -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 7

[opensuse] cannot change root while attempting to reinstall grub
by George from the tribe 24 Jun '19

24 Jun '19

I am trying to copy my root partition into another partition in order to boot from that partition. My system has 2 hard drives - an sdd which is /dev/sda, and an hdd, which is /dev/sdb. Here is how they are partitioned: > fdisk -l Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 5105ED88-0EA8-4BF5-B7B8-31C56BA1351E Device Start End Sectors Size Type /dev/sda1 2048 52430847 52428800 25G Linux filesystem /dev/sda2 52430848 104859647 52428800 25G Microsoft basic data /dev/sda3 104859648 488396799 383537152 182.9G Microsoft basic data Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: A4BA7F24-83E8-4139-BBE3-76AB94D3CDDC Device Start End Sectors Size Type /dev/sdb1 2048 1026047 1024000 500M EFI System /dev/sdb2 1026048 1288191 262144 128M Microsoft reserved /dev/sdb3 1288192 433004543 431716352 205.9G Microsoft basic data /dev/sdb4 1928595456 1929517055 921600 450M Windows recovery environment /dev/sdb5 1929517056 1951195135 21678080 10.3G Windows recovery environment /dev/sdb6 1951197184 1953523711 2326528 1.1G Windows recovery environment /dev/sdb7 433004544 466558975 33554432 16G Linux swap /dev/sdb8 466558976 518987775 52428800 25G Linux filesystem /dev/sdb9 518987776 1928595455 1409607680 672.2G Linux filesystem Partition table entries are not in disk order. What I want to do is copy the contents of /dev/sda1 to /dev/sdb8, then setup grub to see the operating system at /dev/sdb8, and be able to boot from there. I have already copied /dev/sda1 to /dev/sdb1 using rsync, so now it is just a matter of setting up grub. I have successfully used the following procedure many times in the past, but this time it isn't working. root@tribetrekDellbig:/home/george> mount /dev/sdb8 /mnt root@tribetrekDellbig:/home/george> mount -o bind /proc /mnt/proc/ root@tribetrekDellbig:/home/george> mount -o bind /sys /mnt/sys/ root@tribetrekDellbig:/home/george> mount -o bind /dev /mnt/dev/ root@tribetrekDellbig:/home/george> cd /mnt root@tribetrekDellbig:/mnt> chroot /mnt /bin/bash: error while loading shared libraries: libreadline.so.8: cannot open shared object file: No such file or directory The plan was after changing root, I was going to re-install grub. I can reinstall grub regardless, but if I change the root first, then it will make the new partition the first partition in the grub list. I also tried to do this using a rescue system, but I get the same error. My rescue system stick is a leap 42.3 stick, so I expect that library was not part of 42.3 and that is the problem there. But trying to change root inside a shell on a fully booted system, where the root partition files are simply copied from one partition to another should not cause this problem. I am running leap 15.0 in this partition that I copied over to /dev/sdb8. I was running tumbleweed on this partition before, but I used a zypper dup to change it to leap 15.0. Any suggestions? -- George Box: TW | Plasma 5 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 15.0 | Plasma 5 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 15.0 | Plasma 5 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] Is your clamav 0.101.2 working properly?
by Masaru Nomiya 23 Jun '19

23 Jun '19

Hello, If you have installed clamav 0.101.2 from opensuse's repository, is it working properly? I can't think so. To check this, try; $ ldd /usr/bin/clam* | grep libclamms You will get; libclammspack.so.0 => not found libclammspack.so.0 => not found libclammspack.so.0 => not found libclammspack.so.0 => not found In my case; libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007fa6ac38f000) libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007ff5cdbdf000) libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007f1e55793000) libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007eff03dad000) Because, I made clamav-0.101.2-1.1.src.rpm by my self with the release of clamav-0.101.2.tar.gz, then compile & installed. Regards, --- ┏━━┓彡 Masaru Nomiya mail-to: nomiya @ galaxy.dti.ne.jp ┃＼／彡 ┗━━┛ "Bill! You married with Computers. Not with Me!" "No..., with money." -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 10

[opensuse] Is my new WD external disk defect?
by Daniel Bauer 22 Jun '19

22 Jun '19

Hi, I just bought a new external disk, but it doesn't show up when plugging it. It also doesn't show up in Yast partitioner. So I unplugged it, plugged it again and typed dmesg This is the output: [ 757.034290] usb 8-2: new SuperSpeed USB device number 6 using xhci_hcd [ 757.056488] usb 8-2: New USB device found, idVendor=1058, idProduct=1230 [ 757.056492] usb 8-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 757.056494] usb 8-2: Product: My Book 1230 [ 757.056497] usb 8-2: Manufacturer: Western Digital [ 757.056499] usb 8-2: SerialNumber: 574343344531373430333935 [ 757.057552] usb-storage 8-2:1.0: USB Mass Storage device detected [ 757.057816] scsi host20: usb-storage 8-2:1.0 [ 758.055354] scsi 20:0:0:0: Direct-Access WD My Book 1230 1065 PQ: 0 ANSI: 6 [ 758.055724] sd 20:0:0:0: Attached scsi generic sg4 type 0 [ 758.057137] scsi 20:0:0:1: Enclosure WD SES Device 1065 PQ: 0 ANSI: 6 [ 758.057704] sd 20:0:0:0: [sdc] Unit Not Ready [ 758.057709] sd 20:0:0:0: [sdc] Sense Key : Hardware Error [current] [ 758.057714] sd 20:0:0:0: [sdc] ASC=0x30 <<vendor>>ASCQ=0x89 [ 758.060536] ses 20:0:0:1: Attached Enclosure device [ 758.060736] ses 20:0:0:1: Attached scsi generic sg5 type 13 [ 758.061684] ses 20:0:0:1: Failed to get diagnostic page 0x1 [ 758.061687] ses 20:0:0:1: Failed to bind enclosure -19 I saw the "Sense Key : Hardware Error [current]" and thought, well, maybe formatting will help. So I typed fdisk -l | grep '^Disk' But all I see are the disks I already know. The new external doesn't appear. Is it defect? Thanks for hints! Daniel -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] system freeze during boot of new kernel v. 4.4.180-102.1.x86_64
by ken 22 Jun '19

22 Jun '19

The day before yesterday I did a system update, including downloading and installing a new kernel (v. 4.4.180-102.1.x86_64). I didn't reboot however; rather I continued to run the previous kernel (4.4.179-99-default). This may be worth mentioning only because towards the end of the day yesterday my system froze up. That is, I could move the mouse pointer around, but clicking on any window did nothing. This meant that I couldn't switch to any other window, so no way to try to diagnose anything. From gkrellm, however, I did see that both RAM and swap usage were normal, not maxed out, so no runaway processses. But the only way to get out of that frozen system was to power down via the power switch. Turning the laptop back on, I booted into the new kernel. However, it wouldn't boot. It hung even before I was able to log in, when the text messages about the boot processes were still rolling up the screen. Here's what I saw: ... [ OK ] Reached target System Iniitialization. Starting Show Plymouth Boot Screen... Starting dracut Initqueue hook... [ 1.761617] wmi: Mapper loaded [ 8.862476] nouveau 0000:01:00.0: DRM: evicting buffers... [ 8.862400] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [ 8.862497] nouveau 0000:01:00.0: DRM: suspending client object trees... [ 8.865333] nouveau 0000:01:00.0: DRM: suspending kernel object trees.. And that's where it hung... for at least fifteen minutes (that's about how long it took me to note by hand all of what I saw onscreen). I had to hard-reboot (again), where I selected the previous (bootable) kernel (4.4.179-99-default). There was no problem booting it and haven't had any problems running it for more than a day-and-a-half. Any explanations and/or recommendations? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2