June 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Boot problem after latest TW dup
by Ken Schneider - openSUSE 02 Jul '18

02 Jul '18

Old HP computer so possible hardware issues. I had issues during the dup to 20180628 and need to use the rescue system to repair grub. I cannot find an email I had with steps including 'bind -o' in them so if some kind soul could sent the procedure I would appreciate it. I've already repaired the filesystem but need to repair grub as well. Many thanks. -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] weird error on opensuse site following an advert: new encryption only on suse?
by L A Walsh 02 Jul '18

02 Jul '18

I followed an opensuse advert for selling data storage for body-cams to police. It went through some redirects on google, then went to www.suse.com, where I prompt got some weird error I can't reproduce because google is serving up a different advert, and I don't know the URL because google encrypts the SSL stream (recently upgraded my squid and have yet to pop in a new local cert to decode it). This is a perfect reason why I hate needless encrypting of webpages -- as now I can't even find the URL I was on let alone reproduce the problem from it. However, I get a different but similar error if I try to goto the website directly. The connection was interrupted The connection to www.suse.com was interrupted while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Pale Moon is permitted to access the Web. ----- Before, when I got the error, in my proxy log I got: +5.86 0ms; 0 (0/-) NONE/000 <Athenae [NONE error:transaction-end-before-headers - - -] +0.00 0ms; 0 (-/-) NONE/000 <Athenae [NONE error:transaction-end-before-headers - - -] +11.37 2038ms; 39 (3.0/19.0) TUNNEL/200 <Athenae [CONNECT www.suse.com:443 - 130.57.66.10 -] +34.72 2044ms; 39 (1.0/19.0) TUNNEL/200 <Athenae [CONNECT www.suse.com:443 - 130.57.66.10 -] --- After most of the suse connects, I see the weird message in my squidlog that I've never seen before "error:transaction-end-before-headers"... I get the same message going to the opensuse network forums webpage. I have a feeling it has to do with the new encryption as I'm using an older browser by default So far, opensuse is the first site that I've hit this on. I know it isn't the proxy, as it opens in another (newer browser (opera)). So the claim is that open suse is doing this because google is forcing it. Then why am I not having the same problem with other web pages -- including google? This new encryption (if that's what it is and if it was done right) seems to be only present on opensuse systems at this point (maybe more will pop up later). But the part I find to be the most strange is that the sites that the ad was on, had no problem, I have no problems any google site (youtube, plus, etc). Just suse.com and opensuse.org. I don't have the problem on download.opensuse.org (which defaults to http for me), nor the https version used on that site. So why is opensuse causing problems for some browsers, but no one else seems to be (including download site)? Ideas? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

17 56

[opensuse] Adobe Reader no longer works - 15.0
by James Knott 01 Jul '18

01 Jul '18

Since installing Leap 15.0, I now see Adobe Reader no longer works. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

23 94

[opensuse] SuSE 42.3 on laptop?
by Markus Egg 30 Jun '18

30 Jun '18

Hello, my trustful laptop had it's final shutdown after 11 years. There are currently 2 choices for my usage (watching videos, doing 3D printing, usenet, dual ethernet). Dell Inspiron 7577 ( 256GB SSD, 1TB HDD, 16GB) Acer Aspire VX5 ( 512GB SSD + 1.000GB, 16GB) All of them are missing a DVD Writer (or even BluRay player). So which combination of USB (3.0?) Bluray player/DVD writer can I use with the above laptops to install SuSE 42.3 from DVD beside that Windows 10 (dual boot)? Also I need a 2nd Ethernet. I was using PCAMCIA/Cardbus up to now which worked fine, now I have to dump this working hardware also. :-/ Which USB-Ethernet dongles do you suggest? Is there any other better combination? Thanks in advance BR ME -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 15

[opensuse] Combined wifi bluetooth RTL8723DE on an HP 15 laptop has bluetooth only.
by Dave Plater 30 Jun '18

30 Jun '18

Hi, I've bought an HP 15 laptop where neither blue tooth or wifi works under both 42.3 and Leap 15.0. Of course it works perfectly under windows 10. I googled and found that Larry Finger maintains a git hub repository of such drivers and I checked out rtlwifi_new which has my RTL8723DE driver src but it fails to build most probably due to the Leap:15.0 kernel being altered. Can anybody help, I'm currently stumped. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] Re: [opensuse-factory] Howto fix: Sources could not be expanded: conflict in file firefox-esr.spec in branched package
by David C. Rankin 29 Jun '18

29 Jun '18

On 06/29/2018 02:43 PM, Axel Braun wrote: > Same was just discussed here: > https://lists.opensuse.org/opensuse-packaging/2018-06/msg00012.html > Thank you Axel, That is the frustrating part. If I was using osc locally for firefox-esr, that wouldn't be an issue, but I am only using build-service here. I didn't want to create a local osc build which duplicates the 200M+ source file both in the osc dir as well as in the firefox mercurial repository locally. I'll try and find a way to only transfer the .spec, but if you have any tips or help there, I'd appreciate it. This should really be something that should be easily handled with the web-interface alone. Thanks again. You have pointed me in the right direction. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] mozilla-nss update
by Dave Howorth 29 Jun '18

29 Jun '18

I just went to YaST Online Update and see a bunch of updates available. When I click on Accept, a box pops up advising me that an update to mozilla-nss has also been changed to resolve dependencies. I have 3.36.1-47.1 and it wants to install 3.36.4-50.1. What I can't find is how to see what dependency would be broken, or why this update is only listed as an 'automatic' one and not in the list of available updates, so I can't see what problems it is supposed to fix. How can I access that information? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Different UID's
by Frans de Boer 29 Jun '18

29 Jun '18

Dear All, Can someone explain why there is such a difference in UID's as well as GUID's between leap 15 and Tumbleweed? I use multiple OSen, but all use the same data disks for none OS bounded data. For instance, I use one common data directory for use of Qemu with the group KVM. But under leap KVM is group 488 and under Tumbleweed 478, which makes it impossible to use the data sets without changing the GUID every time. This is just one example, there are many more. So, anyone...? Regards, Frans. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 21

[opensuse] Cups compatibility
by Ansgar Esztermann-Kirchner 28 Jun '18

28 Jun '18

Hello List, having recently upgraded by 42.3 machine to Leap 15, I've noticed my cups client does not talk to the (ancient) server anymore. When I look at other machines, cups seems to have changed from 1.7.5 to 2.2.7, so maybe something changed so drastically that compatibility is impaired? My cups knowledge is sketchy, so I do not really know how to debug this problem. Any hints? For what it's worth, I see E [25/Jun/2018:14:23:45 +0200] cupsdReadClient: 20 IPP Read Error! in the server's error_log while the client reports lpr: bad request My /etc/cups/client.conf is unchanged from previous versions (i.e. it's still working for Leap 42.3 and earlier): ServerName our_cups_server.mpibpc.intern/version=1.1 Thanks, A. -- Ansgar Esztermann Sysadmin http://www.mpibpc.mpg.de/grubmueller/esztermann

6 20

Re: [opensuse] Adobe Reader no longer works - 15.0
by Joerg Kuehne 28 Jun '18

28 Jun '18

> I copied all /usr/lib64/libxcb* files and symlinks in my working 42.3 > to /usr/lib/Adobe/Reader9/Reader/intellinux/lib in the 15.0 VM > > carlos@linux-phe7:~> acroread > Segmentation fault (core dumped) > carlos@linux-phe7:~> Adobe Reader is a 32Bit application, so you need to copy the 32Bit versions from /lib/ or /usr/lib/ Joerg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3