November 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] A start job is running for dev-sda9.device
by Istvan Gabor 13 Nov '18

13 Nov '18

Hello: I have the following problem in my openSUSE Leap 42.3 system. I have an old IDE drive but I don't have IDE connector on my motherboard. I have inserted a PCI-IDE card into the motherboard. The card is recognized when I turn on the computer and the IDE drive attached to the card is also recognized. Grub is started correctly and it starts booting the OS. But soon booting stops with the following few lines at the end of message stream: [OK] Reached target Remote File Systems (Pre). [OK] Reached target Remote File Systems. [OK] Reached target System Initialization. [OK] Reached target Basic System. [..] A start job is running for dev-sda9.device (...min ..s / no limit) sda9 is the root partition of the OS and it seems the boot cannot find it and stops. In my fstab sda9 is defined as: UUID=97b17a79-12e8-4222-8702-972d121b9c9b / ext4 acl,user_xattr 1 1 I suppose the culprit might be the initrd, maybe sda9 is hard coded into it, but I am not sure. Anyway, how could I trace what the problem is and fix it? If I remove the IDE hard drive attached to the PCI-IDE card, the system boots normal. Some additional questions regarding the boot message stream: How can I read the lines scrolled up, that is scrolling the screen? Which is the point (what message) in the message stream where the booted OS takes the job from initrd? Another queston regarding initrd/initramsfs: How can I uncompress the initramfs to a temporary directory in Leap 42.3? None of the answers I found for linux general worked (gzip -dc, cpio -i). Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] opensuse sending email as my domain
by Darin Perusich 13 Nov '18

13 Nov '18

I was reviewing the weekly DMARC digest for my domain, and over the course of the past week some 600+ messages were sent from openSUSE/SUSE servers as my domain. Can someone from openSUSE/SUSE explain why such email was be originating from your mail servers? opensuse.org * 2001:67c:2178:8::18 = 440 messages * 195.135.221.145 = 159 messages suse.de * 195.135.220.2 = 5 * 195.135.220.15 = 3 -- Later, Darin -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Anyone in Xemacs interested?
by Dr. Werner Fink 12 Nov '18

12 Nov '18

Hi, as Xemacs do not get into a final version for several years I'd like to drop it. Werner -- "Having a smoking section in a restaurant is like having a peeing section in a swimming pool." -- Edward Burr

8 8

[opensuse] Login weirdness
by Michael Fischer 12 Nov '18

12 Nov '18

Leap 42.3 Haven't encountered this on previous installations, nor prior to a few weeks ago on this box. On a reboot, where it wold normally prompt for login, login: <typing anything here is not echoed back to the screen> Give Root Password for Maintenance (or press Control-D to continue) trying to log in normally just keeps having the terminal behave strangely, re-outputing some version of the above. hitting CTRL-D just sends it into a shutdown sequence. Hitting ENTER many times eventually produces "Welcome To OpenSuse".... and a login prompt which works normally. I find the following in journalctl: Oct 30 15:19:42 blinkenlights login[946]: gkr-pam: error looking up user information Oct 30 15:19:43 blinkenlights login[946]: pam_unix(login:auth): check pass; user unknown which I think comes from the botched efforts while it was saying """ Give Root Password for Maintenance (or press Control-D to continue) """ I recall seeing an error message about tty1 on the screen when I was in the midst of the failed logins and reboots, but I do not find it in journalctl. Suggestions for fixing/debugging, etc.?? journalctl _does_ show: Oct 30 16:50:25 blinkenlights smartd[929]: Device: /dev/sda [SAT], 16 Currently unreadable (pending) sectors Oct 30 16:50:25 blinkenlights smartd[929]: Device: /dev/sda [SAT], 16 Offline uncorrectable sectors Not sure if that is pertainent. TIA Michael -- Michael Fischer michael(a)visv.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 58

[opensuse] 3D PDF
by Roger Oberholtzer 12 Nov '18

12 Nov '18

Has anyone played with viewing 3D PDF's on Linux? A sample file is http://www.3dpdfmaker.com/index.php/download_file/force/339/ Okular opens the file. But it does not support the 3D parts. There is a claim that Acroread on all platforms supports 3D. I have not used that in ages. Just curious. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] missing fonts on upgrade to TW
by George from the tribe 12 Nov '18

12 Nov '18

So on my laptop that I had Leap 15 installed on, I decided to try upgrading to tumbleweed by means of zypper dup. It worked well on my other laptop, so I tried it on this one. After I replaced all the repositories with TW repositories, I ran the zypper dup and it downloaded everything just fine. Then in the middle of the installation, it lost internet connection, and then could not run the script from fetchmsttfonts to download microsoft fonts available on sourceforge. The following command failed: fetchmsttfonts-11.4-22.3-fetchmsttfonts.sh.txt I had to hit "ignore" to keep the installation going. I am now in the new system with fixed internet, but I don't know how to actually run the script from this package. This shows the package that is installed, but how do I figure out what to do next? I can't find anywhere that tells me how to run the script manually when it is not being run by zypper. # rpm -qa | grep fetchmsttfonts fetchmsttfonts-11.4-22.3.noarch Any help would be greatly appreciated. -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: TW | Plasma 5.13 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 15.0 | KDE Plasma 5.8 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Thunderbird v60 date format
by Carlos E. R. 12 Nov '18

12 Nov '18

Hi, I just noticed that Thunderbird now writes the hour in the dates (index view) as "HH. MM", instead of "HH:MM" My locale is: cer@Legolas:~> locale LANG=en_US.UTF-8 LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME=en_DK.UTF-8 LC_COLLATE="en_US.UTF-8" LC_MONETARY=es_ES@euro LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE=es_ES@euro LC_MEASUREMENT=es_ES@euro LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= cer@Legolas:~> And I'm on 15.0 -- Cheers / Saludos, Carlos E. R. (from openSUSE 15.0 (Legolas)) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 25

[opensuse] apcupsd Configuration
by Paul Groves 10 Nov '18

10 Nov '18

Hi everyone I have 3 servers. Let's call them A B and C Server A has an APC BR1500GI connected via the APC RJ50 to USB cable. I wish to set up apcupsd so that when the power goes off, Server A tells server B and C to shut down. Once they have shut down then server A should shut down. So effectively Server A is the 'master' and B/C are 'slaves' I understand this is possible but I have never had to do this before. Has anyone got a similar setup? I also understand that it is possible to have the UPS shut down automatically after the apcupsd 'master' shuts off and then the UPS will turn back on automatically when the mains power is restored. If so this would be ideal because then I can just set the BIOS on the servers to turn on after power is connected and have everything come back on automatically too. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] texstudio freezes KDE3 desktop
by Istvan Gabor 10 Nov '18

10 Nov '18

Hello: I installed texstudio in openSUSE Leap 42.3 with KDE 3.5 desktop. I downloaded the rpm packages from http://download.opensuse.org/repositories/home:/jsundermeyer/openSUSE_Leap_… and http://download.opensuse.org/repositories/home:/jsundermeyer/openSUSE_Leap_… Both versions (qt4 and qt5) freezes KDE 3.5 desktop. There is no any error or other message in the terminal window when I run the program in konsole. I still can switch to other terminal windows by ctrl+alt+F(1-6). How could I fix this or at least find out what the problem is? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] ghostscript + gv / epstopdf problems after recent update
by Boris Gaensicke 10 Nov '18

10 Nov '18

Hi, I'm on LEAP 15.0, and a recent update of ghostscript (gs) to version 9.25 broke some functionality in the interplay between gv / epstopdf and ghostscript. The attached simple eps file displays find in gs, but loading it in gv, or trying to convert it to pdf reports the error listed below. Maybe it's some incompatibility between the new version of gs, and gv / epstopdf which call gs, but I'm not sure how to test this on my system. Any suggestions will be much appreciated. Boris Error: /nocurrentpoint in --currentpoint--GPL Ghostscript 9.25: Unrecoverable error, exit code 1 Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1999 1 3 %oparray_pop 1998 1 3 %oparray_pop --nostringval-- 1982 1 3 %oparray_pop 1868 1 3 %oparray_pop --nostringval-- %errorexec_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- Dictionary stack: --dict:965/1684(ro)(G)-- --dict:0/20(G)-- --dict:82/200(L)-- --dict:12/20(L)-- Current allocation mode is local Current file position is 661

6 15

[opensuse] No keyboard backlight since 4.18.x kernels
by Albert Oszkó 09 Nov '18

09 Nov '18

Hi all, My problem is in the subject. I even cannot find anymore where ccould I set it. I have two ASUS laptops, from the K501U series, but they are non identical. Keyboard backlight is lost on both of them. The last 4.17.x kernel had/has keyboard light. I waited for updates but with the coming of 4.18.6 kernel the lights are still lost. Albert

6 7

[opensuse] calendar servers
by ken 09 Nov '18

09 Nov '18

What/Which calendar servers are available for us suse people? I tried a search for "Darwin Calendar Server (DCS)", but that turned up nada. Did I search wrong? What other possibilities are there? tnx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] Qt Creator
by Dave Howorth 09 Nov '18

09 Nov '18

Does anybody use Qt Creator? I've just installed it on Leap 15.0 (V4.6.1 from the standard repositories) but I'm having trouble getting it to work. I've got the main window coming up and went to the first tutorial 'Help: Build and Run Examples' (Grr! another annoying program that won't allow me to select text!). Clicking on that brings up a web page <https://doc.qt.io/qtcreator/creator-build-example-application.html> and that says I should go to an example, but there appear to be no examples installed. In that case, it says to check what Qt versions are installed and clicking on that link takes me to <https://doc.qt.io/qtcreator/creator-project-qmake.html> and that says to 'Select Tools > Options > Kits > Qt Versions > Add' but the Tools menu has an Options... button and when I select that I get (a modal WTF!) window with lots of possibilities but none of them is Kits. Oh, and those weblinks are to Qt Creator Manual 4.7.2 so there's a possibility that the documentation is wrong because it's a different version. So what am I missing? Has openSUSE packaged it wrong so I'm missing some package or other, or is there a bug in Qt Creator, or do I have finger trouble? Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 6

[opensuse] MSSQL for PHP7 in opensuse 15
by Joachim Reichelt 07 Nov '18

07 Nov '18

Dera all. how to get a MSSQLl client script using php7 up in opens use 15? I installed all needed packets, but the Microsoft ODBC is linked to an ole openssl version und raises a „no certificates found“+ Joachim Reichelt Mit freundlichen Grüßen Joachim Reichelt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] display managers, startx
by Michael Fischer 05 Nov '18

05 Nov '18

I may have missed the story, and google didn't help (perhaps I used the wrong incantation) Questions: 1) Is the *only* reason for deprecating `startx(1)` the setuid bit requirement? If not, what are the other reasons? 2) I have various xset, xrdb and other commands in my ~/.xinitrc prior to the exec of the windowmanager. In the display manager scenario, are these still run? If not, what is the recommended way to have them executed? I wonder if this is the right idea? https://unix.stackexchange.com/questions/47359/what-is-xsession-for and moving the commands from ~/.xinitrc to ~/.xsession? I suppose the exact spot is DM-dependent? FWIW, I use fvwm2, specified in ~/.xinitrc: ``` export WINDOMANAGER=/usr/bin/fvwm ... various xset, xrdb, etc.. commands ... exec $WINDOWMANAGER ${1+"$@"} ``` 3) If I want to swap LightDM for SDDM, what is the recommended procedure? TIA. Michael -- Michael Fischer michael(a)visv.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] zypper dup : updatedb gets stuck
by ellanios82 04 Nov '18

04 Nov '18

a week ago , upon completion of doing my weekly "zypper dup" , running "updatedb" got stuck and continued running `forever` - same today : "updatedb" got stuck ....... regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 16

[opensuse] Scanner settings?
by James Knott 04 Nov '18

04 Nov '18

I have an Epson scanner and have been using it for years with sane. However, the software that comes with openSUSE does not have any means to save settings. So, every time I want to scan a document, I have to select source and then choose mode, resolution and set the boundaries, even though I use the same settings virtually every time I scan. Is there any way to save those settings? Perhaps a better app? I have Skanlite installed, but it has the same issue. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 44

[opensuse] no X after switch to EFI boot / NVIDIA
by Paul Neuwirth 03 Nov '18

03 Nov '18

Hello, sorry I could not do much recherche.. It's hard without X. Maybe someone has a clue, why Xorg does not launch after switch from BIOS boot to EFI boot.. Thank you for any hint.. maybe it's also obvious for someone... First symptom, I have a different console font (I did never use kms before..). I tried to enable or disable modesetting (nomodeset / drm-nvidia.modesetting=0).. There are two nvidia cards installed.. maybe it is a resource conflict, that did not appear at BIOS boot. Maybe I have some incompatible packages installed... rpm -qa | grep -iE "nv-|nvidia|nouv" nvidia-glG04-390.87-lp150.10.2.x86_64 xf86-video-nv-2.1.21-lp150.1.7.x86_64 x11-video-nvidiaG04-390.87-lp150.10.2.x86_64 nvidia-computeG04-390.87-lp150.10.2.x86_64 php7-iconv-7.2.5-lp150.2.15.1.x86_64 nvidia-gfxG04-kmp-default-390.87_k4.12.14_lp150.11-lp150.10.1.x86_64 libvdpau_nouveau-18.0.2-lp150.17.2.x86_64 Mesa-dri-nouveau-18.0.2-lp150.17.2.x86_64 xf86-video-nouveau-1.0.15-lp150.1.9.x86_64 libdrm_nouveau2-32bit-2.4.91-lp150.1.2.x86_64 unoconv-0.7-lp150.1.8.noarch libdrm_nouveau2-2.4.96-lp150.245.1.x86_64 the output of x.org: https://www.swabian.net/extern/problemnvidia/xsession some important lines: (EE) [drm] Failed to open DRM device for (null): -2 (EE) [drm] Failed to open DRM device for (null): -2 the dmesg output: https://www.swabian.net/extern/problemnvidia/dmesg when I try to start the displaymanager.service I get instantly: [ 99.473246] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 99.473347] caller _nv001169rm+0xe3/0x1d0 [nvidia] mapping multiple BARs Thank you for any help Paul Neuwirth -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Epson L805 , anybody?
by Radule Šoškić 03 Nov '18

03 Nov '18

Hi, Any experiences with Epson L805 on this list? Compatibility, qualty, economy - pro et contra, please. Currently, I know there is some level of support for Linux (generic driver and utility SW available at http://download.ebz.epson.net/dsc/search/01/search/searchModule). It's all very new (25.10.2018). It seems that CISS/ITS technology takes economy to next level comparing to older ink-jets and lasers, and that's what attracted me. But I would like to get some real-life comments from real users, if any. TIA and best regards, Radule Soskic N��r��y隊Z)z{.�ﮞ˛��m�)z{.��+�:�{Zr�az�'z��j)h��Ǿ� ޮ�^�ˬz��

2 1

[opensuse] python question
by George from the tribe 02 Nov '18

02 Nov '18

I am looking to get started on learning python. Any python programmers out there? My number 1 question is, what is your preferred IDE? I am looking at a medium sized project (for my experience) and I expect I will need some good troubleshooting tools that also give syntax help. I have read that Eclipse is a really good IDE for python, even though it is mostly used for java, and that PyDev adds lots of features to Eclipse. But there are other recommendations also. Anyone have any thoughts on what you have used and prefer? Advantages and disadvantages? -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: TW | Plasma 5.13 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 15.0 | KDE Plasma 5.8 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] eric the python IDE
by George from the tribe 02 Nov '18

02 Nov '18

So as I am starting my education in python, something comes up here that tells me I need to know more about how opensuse packages things... On my bigger laptop in which I am running tumbleweed, I see that eric6 is available from the regular repositories as an official release. However, in leap 15, only eric5 is available. Eric6 has not yet made it into the official repositories. On the opensuse package search, I can see that eric6 is available as an "experimental" package (and it is one version higher than the tumbleweed version of eric6 - tumbleweed has released eric6-18.09, but the experimental packages have released eric6-18.10. There are also 2 "community" packages available for eric6 - one is 18.09 and the other is 18.10. Then there are also some builds of eric6 that are available from the build service that didn't show up in the package search. So I am trying to decide what would be better - to download someone's community version they have made available, or the experimental package? Thoughts out there - what do you all prefer in situations like this? Do you all prefer a community package that a user has put together, or do you prefer something that comes from opensuse? What also would be your reasons for your preference? -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: TW | Plasma 5.13 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 15.0 | KDE Plasma 5.8 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] [SOLVED] LibreOffice Calc 6.1.x Scrolling Crash
by Andrei Verovski 01 Nov '18

01 Nov '18

Hi, Today made a spreadsheet with a several 3D bar graphs and found that scrolling in LibreOffice Calc results in sudden application shutdown without any error message and loss of unsaved changes in document. Tested on different Linux distributions (SuSE Leap 15.0 and SuSE Tumblweed) and various hardware (nVidia GeForce and Intel GMA). Crashes were so often that app could be considered close to unusable in this particular case. After some tweaking problem was solved. Tools -> Options -> LibreOffice -> View -> Graphics Output / Use anti-aliasing should be off. Changing hardware acceleration option within LibreOffice doesn't affect this crash. More quick tips on my blog: http://www.vacuum-tube.eu/wp/?p=399 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Questions about name resolving using /etc/hosts
by Marc Chamberlin 01 Nov '18

01 Nov '18

I am running OpenSuSE Leap 42.3 on a machine with 2 NICs. I am also running a Bind DNS server on the same system. I did an experiment in order to assign a unique hostname to each of the NIC interface cards by simply editing my /etc/hosts file as shown below: (sorry, I am not sure how to format this for a newsgroup.) bigbang:/etc # cat /etc/hosts 127.0.0.1 localhost # added for each nic 192.168.10.100 bigbangInternal.mydomainname.com bigbangInternal 10.10.10.100 bigbangExternal.mydomainname.com bigbangExternal ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts My host.conf file is configured to look at the hosts file first when resolving names: bigbang:/etc # cat /etc/host.conf ## file comments deleted for brevity... order hosts, bind multi on My nsswitch.conf file is also configured to look at the hosts file first when resolving names: bigbang:/etc # cat /etc/nsswitch.conf ## file comments deleted for brevity... passwd: compat group: compat hosts: files mdns_minimal [NOTFOUND=return] dns networks: files dns services: files protocols: files rpc: files ethers: files netmasks: files netgroup: files nis publickey: files bootparams: files automount: files nis aliases: files After editing the /etc/hosts file I flushed the name service cache: bigbang:/etc # systemctl restart nscd.service and when I test things out I get the following "surprising" results which appear at first glance to show that the name resolving order specified in nsswitch.conf is not being honored. But something else even deeper is going on as well that really has me baffled: bigbang:/etc # ping bigbangInternal ping: unknown host bigbangInternal ??? I didn't expect that! bigbang:/etc # getent hosts 127.0.0.1 localhost 192.168.10.100 bigbangInternal.mydomainname.com bigbangInternal 10.10.10.100 bigbangExternal.mydomainname.com bigbangExternal that looks good... bigbang:/etc # getent hosts localhost ::1 localhost ??? I am a bit surprised by this as I did not enable IPv6 addresses in YaST bigbang:/etc # getent hosts bigbangInternal bigbang:/etc # getent hosts bigbangInternal.mydomainname.com ??? no response! why not? bigbang:/etc # getent hosts 10.10.10.100 10.10.10.100 mydomainname.com ??? huh? Why did I get my dns domain name? bigbang:/etc # getent hosts 192.168.10.100 ??? no response! My guess is that these attempts to resolve these names and ip addresses is being done by my bind dns server and not by looking things up in the /etc/hosts file. But I don't understand why given that I am specifying that the order of lookup is to be done first via the /etc/hosts file and then by the bind dns server if the lookup in the hosts file fails. What am I missing and/or not understanding? Thanks in advance for any guidance/clues as to why I am seeing these results. Marc... -- Linux Counter -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] ls or find on directories with millions of files ?
by Per Jessen 01 Nov '18

01 Nov '18

This might be file system dependent, I'm not sure. I've been doing some tidying up and got stuck on a few directories with millions of files in them. 3+ million per directory. Doing a 'find' takes a very long time and also essentially chokes the system. I ended up writing a small utility using getdents() instead, much faster and the system remains operational. I was just wondering if e.g. 'find' or 'ls' had some options that would limit the scope ? (not mtime etc). -- Per Jessen, Zürich (5.9°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 24

[opensuse] Why am I now presented with 3 FULL Nvidia Licenses on Upgrade?
by David C. Rankin 01 Nov '18

01 Nov '18

All, What changed? Why are we now presented with the Nvidia license for every nvidia component to upgrade the drivers? Over and over again I was presented wit the following 3 times just to be able to update: (Use arrows or pgUp/pgDown keys to scroll the text by lines or pages.) In order to install 'nvidia-computeG04', you must agree to terms of the following license agreement: License For Customer Use of NVIDIA Software IMPORTANT NOTICE -- READ CAREFULLY: This License For Customer Use of NVIDIA Software ("LICENSE") is the agreement which governs use of the software of NVIDIA Corporation and its subsidiaries ("NVIDIA") downloadable herefrom, including computer software and associated printed materials ("SOFTWARE"). By downloading, installing, copying, or otherwise using the SOFTWARE, you agree to be bound by the terms of this LICENSE. If you do not agree to the terms of this LICENSE, do not download the SOFTWARE. RECITALS Use of NVIDIA's products requires three elements: the SOFTWARE, the hardware on a graphics controller board, and a personal computer. The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE is not sold, and instead is only licensed for use, strictly in accordance with this document. The hardware is protected by various patents, and is sold, but this agreement does not cover that sale, since it may not necessarily be sold as a package with the SOFTWARE. This agreement sets forth the terms and conditions of the SOFTWARE LICENSE only. 1. DEFINITIONS 1.1 Customer. Customer means the entity or individual that downloads the SOFTWARE. 2. GRANT OF LICENSE 2.1 Rights and Limitations of Grant. NVIDIA hereby grants Customer the following non-exclusive, non-transferable right to use the SOFTWARE, with the following limitations: 2.1.1 Rights. Customer may install and use one copy of the SOFTWARE on a single computer, and except for making one back-up copy of the Software, may not otherwise copy the SOFTWARE. This LICENSE of SOFTWARE may not be shared or used concurrently on different computers. 2.1.2 Linux/FreeBSD Exception. Notwithstanding the foregoing terms of Section 2.1.1, SOFTWARE designed exclusively for use on the Linux or FreeBSD operating systems, or other operating systems derived from the source code to these operating systems, may be copied and redistributed, provided that the binary files thereof are not modified in any way (except for unzipping of compressed files). 2.1.3 Limitations. No Reverse Engineering. Customer may not reverse engineer, decompile, or disassemble the SOFTWARE, nor attempt in any other manner to obtain the source code. No Separation of Components. The SOFTWARE is licensed as a single product. Its component parts may not be separated for use on more than one computer, nor otherwise used separately from the other parts. No Rental. Customer may not rent or lease the SOFTWARE to someone else. 3. TERMINATION This LICENSE will automatically terminate if Customer fails to comply with any of the terms and conditions hereof. In such event, Customer must destroy all copies of the SOFTWARE and all of its component parts. Defensive Suspension. If Customer commences or participates in any legal proceeding against NVIDIA, then NVIDIA may, in its sole discretion, suspend or terminate all license grants and any other rights provided under this LICENSE during the pendency of such legal proceedings. 4. COPYRIGHT All title and copyrights in and to the SOFTWARE (including but not limited to all images, photographs, animations, video, audio, music, text, and other information incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by NVIDIA, or its suppliers. The SOFTWARE is protected by copyright laws and international treaty provisions. Accordingly, Customer is required to treat the SOFTWARE like any other copyrighted material, except as otherwise allowed pursuant to this LICENSE and that it may make one copy of the SOFTWARE solely for backup or archive purposes. 5. APPLICABLE LAW This agreement shall be deemed to have been made in, and shall be construed pursuant to, the laws of the State of California. 6. DISCLAIMER OF WARRANTIES AND LIMITATION ON LIABILITY 6.1 No Warranties. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND NVIDIA AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 6.2 No Liability for Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL NVIDIA OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF NVIDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 7. MISCELLANEOUS The United Nations Convention on Contracts for the International Sale of Goods is specifically disclaimed. If any provision of this LICENSE is inconsistent with, or cannot be fully enforced under, the law, such provision will be construed as limited to the extent necessary to be consistent with and fully enforceable under the law. This agreement is the final, complete and exclusive agreement between the parties relating to the subject matter hereof, and supersedes all prior or contemporaneous understandings and agreements relating to such subject matter, whether oral or written. Customer agrees that it will not ship, transfer or export the SOFTWARE into any country, or use the SOFTWARE in any manner, prohibited by the United States Bureau of Export Administration or any export laws, restrictions or regulations. This LICENSE may only be modified in writing signed by an authorized officer of NVIDIA. Do you agree with the terms of the license? [yes/no] (no): yes -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4