November 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Project management software question for project managers
by Ted Byers 15 Apr '24

15 Apr '24

I am looking for project management software I can install on my Suse box. Alas, there are quite a number of prducts that claim to be suitable project management products, but I am hoping to obtain a little help separating the wheat from the chaffe. Basically, when I open the project management software, I want to be able to choose from among a number of projects that are under way, and then see the relation between a client's wish list and the functional requirements specs, and then how these specs relate to the UML diagrams that have been created, and from there, what tasks have been defined for each requirement and the identity of all persons involved, the developers and their managers, and the person who designed the code that supports the requirement. And with that, I want to be able to see the project's timeline, the related bugs, &c. I would even want to be able to open the source code files and examine the code that was actually written. Here is my wish list: 1) a web application that stores data in either PostgreSQL or MySQL. 2) easy integration with UML tool (or has it's own UML tool that supports round trip engineering) 3) resource management (e.g. computers, and development tools, that can be used, personelle assigned to each task) 4) documentation of relation between functional requirements specs to specific tasks and specific unit and integration tests. 5) time/effort tracking 6) bug tracking, including data relating the existance of the bug, and effort required to fix it, to the person who wrote the original code, the person who supervised him or her, and the person who designed the 'feature' in question, the time taken to complete the original task, and the technologies used (to imprrove accountability as well as to determine retraining and continuing education needs (people aren't disposable, so instead of taking a harsh aproach to problems identified, I prefer to use education as a corrective, but I can't design corrective instruction without knowing precisely what the need is). I also need to know if a developer has a higher than normal bug rate simply because he doesn't take enough time to ensure the job is done right, or because I haven't adequately trained him, or because of a poor choice of tools, or somethng else that may be my fault. 7) use of task effort tracking history to generate provisional effort/cost estimates from new project's functional requirements 8) easy integration with open source ERP products like OFBiz (which may make trakcing resources and manpower easier, as well as connect real production data to the enterprise's accounting systems) 9) easy integration with CMS products, like Wordpress (especally for production documentation, includng degin documentation and user guides and reference manuals) 10) easy integration with verion control systems such as subversion. If there is a decent product that supports all of this, great (and language used to implement it doesn't matter), but if I have to write code to add missing requirements, then I am limited to those implemented using Perl or Java (and running on Tomcat). I don't know PHP well enough, and I don't know Ruby at all; and I really don't want to think about implementing this sort of thing in C++ (though I could if absolutely necessary). If you have project management experience, and use tools that are available for Suse Linux, what software product(s) did you use, and with what result? While I await relies, I will continue to review web documentation for those products I have found so far, to see if any of them are a) suitable for use in production and b) to see to what extent they support the features I am after. I have seen a number of products so far in my search, that deserve to be nameless, because they provide no way to relate cost estimates to one's team's track record, or to the details of the design, and seem satisfied with production of a pretty gantt chart (which is why I have formed the view that there is a whole lots of chaffe in the set of applications that call themselves project menement software - I have yet to find anything that really has the potential of being labelled wheat). Thanks Ted -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171). So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] Raid, Raid6, what file system for good fault tolerance?
by cagsm 21 Dec '20

21 Dec '20

Hi list, speaking about software raid, not hardware controller based. I am trying to go for some local OpenSuse machine and adding some storage to it. Was considering Raid6, and now reading about a bit and people left and right scaremongering about the larger the disks these days in the double digit terabyte capacities even, the more likely it is that during a reconstruction of a raid subsequent errors would occur. I would absolutely like to keep my data consistent, and I am not thinking about double digit terabytes either, would stick to 2TB or 4TB disks, with Raid6 thats at least 4 physical drives. Now I am wondering if it possible to use a good robust file system that can add some more parity or check blocks or redundancy on top of the hardware disks, to absolutely be able to always read my data. I can't add multiple machines or like those high availability stuff like clusters and what not I read about DRBD (Distributed Replicated Block Device), or maybe I am just too scared by those technical terms or consider myself to be just a simpleton and wanting to keep it rather simple. My use case here is also not constant availablity, when a disk needs to be replaced, so be it, but I don't want to lose my data that I can not ever read certain parts of it again or such stuff. The thing that came to my mind was, if there is some file systems that would add redundancy and robustness onto the mdraid system of the linux kernel? Anyone with some useful insights? Roughly speaking, I was considering some simple pcie esata interfaced controller card and an external case enclosure with esata port and portmulitplier stuff inside, that can present at least 4 physical disks as JBOD, just a bunch of disks, so that the Linux can seem them all separately. Speed and rebuild times are not my concern, but data persistence and data integrity. Not even number of physical disks, I could live with even one of those 8 bay device enclosures and cases that are out there on the market. Thanks for any help and hints. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 23

[opensuse] Issue with smartd
by Carlos E. R. 21 Oct '20

21 Oct '20

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have one disk that is giving me problems with the smartd daemon. I get this in the log: <3.6> 2018-10-21T13:45:23.829155+02:00 Isengard smartd 1173 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T13:45:24.483719+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2018-10-21T13:45:24.484570+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB <3.6> 2018-10-21T13:45:24.503334+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not found in smartd database. <3.6> 2018-10-21T13:45:24.525071+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Attribute Autosave. <3.6> 2018-10-21T13:45:24.530486+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Automatic Offline Testing. <3.6> 2018-10-21T13:45:24.535003+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2018-10-21T13:45:24.535627+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T13:45:24.880219+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T14:15:25.233525+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 147 to 144 <3.6> 2018-10-21T15:45:31.681938+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2018-10-21T15:45:33.632399+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2018-10-21T16:15:24.678100+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2018-10-21T18:15:31.767150+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2018-10-21T18:15:33.717688+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2018-10-21T18:45:24.587304+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email It intermitently but periodically fail to read atributes, triggering hundreds of emails sent to me to warn of the problem: +++------------ Subject: SMART error (FailedReadSmartData) detected on host: Isengard This message was generated by the smartd daemon running on: host name: Isengard DNS domain: valinor The following warning/error was logged by the smartd daemon: Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data Device info: WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another message will be sent in 24 hours if the problem persists. - ------------++- The disk is indeed smart capable and it works fine, as long as I call smartctl with "-d sat,16", which I do: Isengard:~ # smartctl --test=short -d sat,16 /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sun Oct 21 13:50:18 2018 Use smartctl -X to abort test. Isengard:~ # Isengard:~ # smartctl --health -d sat,16 /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Isengard:~ # It is crucial to use "-d sat,16" or it fails: Isengard:~ # smartctl --health /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0: Unknown USB bridge [0x1058:0x25ee (0x4004)] Please specify device type with the -d option. Use smartctl -h to get a usage summary Isengard:~ # Of course I use that option on the config: Isengard:~ # cat /etc/smartd.conf | egrep -v "^[[:space:]]*$|^#" /dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/wwn-0x5000000000000001 -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/wwn-0x5000c5009399305f -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d sat,16 -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor Isengard:~ # What else am I missing? Is smartd not using "-d sat,16" somewhere else? Is it some other problem? Isengard:~ # rpm -q smartmontools smartmontools-6.6-135.1.x86_64 Isengard:~ # - -- Cheers Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlvM5UMACgkQtTMYHG2NR9WCwQCePjOt8PSMKsx6DwSe9bZJRhHf 2lQAn02eBTrtfAqmEg5ydZVagvMfW2r6 =eIzR -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] Mapping and re-mapping Keyboard Keys
by Paul Groves 14 Mar '19

14 Mar '19

On 27/06/17 12:22, Paul Groves wrote: > > On 27/06/17 08:34, Aaron Digulla wrote: >> xmodmap -pke | less > > These keycodes do not seem to match the system. For example in the > output of this command it says: > > keycode 158 = XF86WWW NoSymbol XF86WWW > > I ran setkeycodes e020 158 > > When I press the e020 (Internet) button xev says I have pressed code > 166 (Back button). > > How on earth has this happened? I specified 158 not 166. What have I > done wrong? > > Just been emailed this link: https://unix.stackexchange.com/questions/49650/how-to-get-keycodes-for-xmod… To quote this article: Here you can see keycode 97 is unused on my system: |keycode 94 = less greater less greater bar brokenbar keycode 95 = F11 XF86Switch_VT_11 F11 XF86Switch_VT_11 keycode 96 = F12 XF86Switch_VT_12 F12 XF86Switch_VT_12 keycode 97 = keycode 98 = Katakana NoSymbol Katakana keycode 99 = Hiragana NoSymbol Hiragana | The keycode X uses and the keycode the kernel uses are OFF BY 8 for "historical reasons". So take 97 - 8 = 89 and use 89 with the setkeycodes command (again as root): So to make my vol - button work (xmodmap keycode 122 -8 = 114) setkeycodes e01e 114 This has worked! I have re-mapped apl the buttons apart from my hotkeys. >> No but there are lots of uncommon keycodes which you can use. For >> example, F13-F35 or KP_F1...KP_F4. > > In the output of the command xmodmap -pke | less there are no codes > for F13-F35 or KP_F1 etc > > I would like to set HK1 - HK4 to F13 - F16 How do I find the keycodes > for these buttons Still looking for the keycodes for F13-16 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 19

[opensuse] Spec'ing a 50 TB dedicated storage subsystem and room to grow?
by Greg Freemyer 22 Feb '19

22 Feb '19

All, I bought a used iSCSI based Drobo in 2016 with 50TB in it. It works great, but it isn't fast by today's standards. (100 MB/sec absolute max). And I never got it to work from openSUSE (Windows and Mac did work). I now need to buy something similar, but with fast I/O and Linux support: 10 Gbit Ethernet and fibre-channel may be my only options? Or are there point-to-point SAS external racks I should consider? Also, I will likely want to put a SSD based cache in the mix at some point. It could be integrated into the storage subsystem, or I could use something like bcache and have the SSD be in the server,. It just needs to be reliable and fast. Recommendations? (I'm thinking used and $10K at the high-end for the subsystem including PCIx cards and switches, if needed.) == details I need to buy a server with 50TB usable disk for a production environment. A high speed disk subsystem is critical. And the project may scale up over time. It doesn't need to be a fail-over cluster, just a single server. I'm looking at used equipment most likely. I was thinking one with 4 CPU sockets would let me start with 2 CPUs and then expand to 4 later on. Lots of RAM capacity would also be great. My first thought was to get a Dell R920 and throw a bunch of disks in it. https://goo.gl/images/x3Rfj2 24 disk slots! But then I looked at what size drives are available for those slots: 2.5 inch. I only see 2TB drives max. I'm hoping to use a Dell server because it's the preferred brand at my (new) job. Unless I'm missing something a standalone rack mount Dell won't work. So, now I'm looking at a used R820 most likely and some sort of disk subsystem to support it. I picked it because it is only a 5-year old design and it has 4 CPU sockets I can expand into as the server demand increases over time. Also 3TB max ram is way above what this will require, even long term. https://media.adn.de/media/DE/DocLib/Poweredge_Easy_Matrix.pdf A used, barebones R820 can be had for under $2K. Just add CPUs and ram. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 41

[opensuse] Leap 15.0 won't boot on a Lenovo T420
by 712＠vivaldi.net 07 Dec '18

07 Dec '18

Hello, I've installed Leap 15.0 on a Lenovo T420 laptop twice, and both attempts resulted in a non-bootable system. During the first installation, I used the Suggested Partitioning option (no other OS on the HD). The installation completed without any warning/error messages. After the restart, the system was stuck and showed exactly the screen shown in the first 8 seconds of this video (not mine and advance apologies for the music): https://www.youtube.com/watch?v=zfr6OldZGVM Using Hiren's rescue cd, I was able to boot the system from the cd, then start Leap 15.0 from HDD0. I saw a short notice that GRUB2 was starting (never saw that when booting from the HDD), then Leap 15.0 was starting, and I could log in. Leap 15.0 appeared to be running fine from the HDD. Then I wiped the HDD, and reinstalled Leap 15.0 with the Guided Setup. I noticed a GPT entry in the proposed partitioning scheme, but I didn't touch that and didn't change anything else. Installation completed OK. After the restart it was stuck again just like in the video. At both attempts, I've changed the boot order and disabled network boot in the BIOS to no avail. I've tried *every* available boot option in the BIOS to no avail, including UEFI / Legacy Boot etc. This laptop has been running Leap 42.3 for months with none of above issues. Because I need a running OS on this laptop, I now installed Linux Mint, and it boots fine from the HDD. Just thought I'd bring this to your attention. Regards, Fritz -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 19

[opensuse] Q: MySQL 5.6 for Leap 15.0 [CORRECTED]
by Andrei Verovski 03 Dec '18

03 Dec '18

Hi ! *** Sorry, made a mistake in previous post, 5.6 version. *** For accounting system we need old MySQL 5.6, and NOT newer. Is it available anywhere in repositories (may be private) for Leap 15 ? I looked here, and through software search, not found anything. http://download.opensuse.org/repositories/server:/database/openSUSE_Leap_15… mysql-community-server RPMs here built for very old SLES 11 and can't be installed on leap 15 due to missing library dependencies. https://dev.mysql.com/downloads/file/?id=468312 Thanks in advance Andrei -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] nfsroot with Leap?
by Daniel Spannbauer 03 Dec '18

03 Dec '18

Hello, Did anyone configure a system to use a nfs root? If yes, how? I tried to build a initrd for nfsroot with dracut, but it alwys searches for a local root device at startup. Regards Daniel -- Daniel Spannbauer Systemadministration marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4-6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] 42.3: KDE on-screen clock 2 hours off
by Mikhail Ramendik 02 Dec '18

02 Dec '18

Hello, I have an OpenSUSE 42.3 system. now fully updated with zypper up. Network time sync is enabled. The timezone is Dublin. which should be GMT. If I open a Konsole window and run "date", I get the correct time (now 13:50 GMT) But the clock in the system tray is off by 2 hours, showing 11:50! I have right-clicked the clock and selected "Digital Clock Settings" and the timezone is correct, Dublin. I tried adding a Moscow rime zone, now on mouseover I get "GMT 11:50 MSK 14:50", even though actually it's GMT 13:50 MSK 16:50 - and the GMT in the command line is correct! How can I fix this? Thanks! -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 16

[opensuse] How to make your Linux machines visible to other Linux machines - TechRepublic
by James Knott 02 Dec '18

02 Dec '18

I recently came across this article. How does it affect OpenSUSE? I couldn't find that pack name in Yast. https://www.techrepublic.com/article/how-to-make-your-linux-machines-visibl… -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Copying a home dir from one PC to another
by Liam Proven 01 Dec '18

01 Dec '18

I have a new desktop. \o/ I want to copy my home directory -- all of it -- from my old one to my new one. They're on the same LAN. I do not have write access to a local fileserver, though. So what's the best way? I don't really want to do it over ssh, because there's no need for encryption -- it's pointless overhead. Old machine runs Tumbleweed. New one has Tumbleweed, Leap 15 and Win10. Neither is a server for anything at all. -- Liam Proven - Technical Writer, SUSE Linux s.r.o. Corso II, Křižíkova 148/34, 186-00 Praha 8 - Karlín, Czechia Email: lproven(a)suse.com - Office telephone: +420 284 241 084 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 43

[opensuse] Trying to adjust the swapiness of clamd
by Carlos E. R. 30 Nov '18

30 Nov '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm trying to force the clamd process to swap agresively, because by default it eats 500 MB of my limited memory even when it is doing nothing but waiting. Sorting process list in "top" by "RES" column shows that clamd is the 5th process using most memory in my system: top - 14:21:12 up 7 days, 14 min, 1 user, load average: 0,60, 0,70, 0,74 Tasks: 532 total, 2 running, 529 sleeping, 0 stopped, 1 zombie %Cpu(s): 5,8 us, 1,6 sy, 0,0 ni, 91,0 id, 1,7 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 8174528 total, 7765124 used, 409404 free, 24892 buffers KiB Swap: 25165820 total, 5177256 used, 19988564 free. 1970388 cached Mem PID USER PR NI VIRT RES SHR SWAP S %CPU %MEM TIME+ COMMAND 7098 cer 20 0 4249152 1,415g 61572 392760 S 0,000 18,15 295:54.17 thunderbird-bin 7494 cer 20 0 3040184 839476 51296 256248 S 0,330 10,27 155:16.49 Web Content 7341 cer 20 0 2858436 746840 41012 202296 S 3,300 9,136 74:35.03 Web Content 5221 cer 20 0 10,139g 740952 137364 464756 S 1,650 9,064 134:50.52 firefox 12020 vscan 20 0 711128 552372 1660 0 S 0,000 6,757 0:00.00 clamd ... Apparently this is done with cgroups, about which I know close to nothing. First I see: <https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/ht…> but I do not understand how to make use of it, except that I want to change memory.swappiness of the process. But I do not see where is that virtual file for the clamd process, if it exists. The examples there do things like: ~]# echo 1G > /cgroup/memory/lab1/memory.limit_in_bytes but they have a "lab1" entry for the particular process they are managing. I don't know how that entry appears. This is what I have: Telcontar:~ # ls /sys/fs/cgroup/memory/ cgroup.clone_children cgroup.sane_behavior memory.limit_in_bytes memory.move_charge_at_immigrate memory.pressure_level memory.swappiness notify_on_release cgroup.event_control memory.failcnt memory.low_limit_in_bytes memory.numa_stat memory.soft_limit_in_bytes memory.usage_in_bytes release_agent cgroup.procs memory.force_empty memory.max_usage_in_bytes memory.oom_control memory.stat memory.use_hierarchy tasks Telcontar:~ # So I continue googling. Aparently systemd can control cgroups. On systemd documentation site, <http://0pointer.de/blog/projects/resources.html>, I see that cgroup settings can be set on the systemd unit file. systemd for Administrators, Part XVIII Managing Resources ... Managing Other Resource Parameters which gives the exact example I want to try: [Service] ControlGroupAttribute=memory.swappiness 70 Fantastic! So I create "/etc/systemd/system/clamd.service.d/override.conf" file: [Service] ControlGroupAttribute=memory.swappiness 100 And try: Telcontar:~ # systemctl daemon-reload Telcontar:~ # systemctl status clamd.service ● clamd.service - Clamav antivirus Deamon Loaded: loaded (/usr/lib/systemd/system/clamd.service; disabled; vendor preset: disabled) Drop-In: /etc/systemd/system/clamd.service.d └─override.conf Active: active (running) since Mon 2018-10-15 14:07:56 CEST; 1min 2s ago Main PID: 12020 (clamd) Tasks: 2 (limit: 512) CGroup: /system.slice/clamd.service └─12020 /usr/sbin/clamd Oct 15 14:07:55 Telcontar clamd[12020]: Mail files support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: OLE2 support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: PDF support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: SWF support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: HTML support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: XMLDOCS support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: HWP3 support enabled. Oct 15 14:07:55 Telcontar clamd[12020]: Self checking every 3600 seconds. Oct 15 14:07:56 Telcontar systemd[1]: Started Clamav antivirus Deamon. Oct 15 14:08:49 Telcontar systemd[1]: [/etc/systemd/system/clamd.service.d/override.conf:2] Unknown lvalue 'ControlGroupAttribute' in section 'Service' Telcontar:~ # What? The lvalue is copied from the documentation! How can I then do it? - -- Cheers Carlos E. R. (from 42.3 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlvEiR4ACgkQtTMYHG2NR9XivACdGYCwgSru7a07vrXoejO/VP3A zXAAnjnb3Alv/2OxyH9Yit2rdBca2J0H =ZRmA -----END PGP SIGNATURE-----

3 8

[opensuse] with the system kernel a lot of noise with wlan. With the kernel stable not. What could be the cause?
by stakanov 30 Nov '18

30 Nov '18

I am getting following errors (but only if I do use the system kernel, not with kernel stable - which I cannot use at the time for precaution because I am using EXT4. [ 161.024433] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 161.267921] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 161.365341] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 164.574845] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 164.820236] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1 [ 164.917233] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 182.261799] wlan1: authenticate with 00:0b:3b:d1:30:4f [ 182.307554] wlan1: send auth to 00:0b:3b:d1:30:4f (try 1/3) [ 182.310068] wlan1: authenticated [ 182.311690] wlan1: associate with 00:0b:3b:d1:30:4f (try 1/3) [ 182.315551] wlan1: RX AssocResp from 00:0b:3b:d1:30:4f (capab=0x431 status=0 aid=1) [ 182.322833] wlan1: associated [ 182.322890] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 185.182991] fuse init (API version 7.26) [ 197.863584] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=216.58.205.227 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=26162 PROTO=TCP SPT=443 DPT=59146 WINDOW=0 RES=0x00 RST URGP=0 [ 197.866873] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=216.58.205.227 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=26166 PROTO=TCP SPT=443 DPT=59146 WINDOW=0 RES=0x00 RST URGP=0 [ 226.552113] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=172.217.23.174 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=33933 PROTO=TCP SPT=443 DPT=57620 WINDOW=0 RES=0x00 RST URGP=0 [ 226.570121] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=172.217.23.174 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=33948 PROTO=TCP SPT=443 DPT=57620 WINDOW=0 RES=0x00 RST URGP=0 [ 239.107772] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 240.934644] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=159.122.87.153 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=14876 DF PROTO=TCP SPT=443 DPT=36474 WINDOW=0 RES=0x00 RST URGP=0 [ 240.943036] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=159.122.87.153 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=14878 DF PROTO=TCP SPT=443 DPT=36474 WINDOW=0 RES=0x00 RST URGP=0 [ 364.107361] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 371.311723] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=52.22.196.254 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=234 ID=15597 DF PROTO=TCP SPT=443 DPT=51308 WINDOW=0 RES=0x00 RST URGP=0 [ 379.223441] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.183 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=11299 DF PROTO=TCP SPT=443 DPT=34470 WINDOW=0 RES=0x00 RST URGP=0 [ 379.412010] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=188.121.36.239 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=117 ID=19790 DF PROTO=TCP SPT=80 DPT=49338 WINDOW=0 RES=0x00 RST URGP=0 [ 379.449340] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.183 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=11435 DF PROTO=TCP SPT=443 DPT=34466 WINDOW=0 RES=0x00 RST URGP=0 [ 382.615402] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=188.121.36.239 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=117 ID=19790 DF PROTO=TCP SPT=80 DPT=49346 WINDOW=0 RES=0x00 RST URGP=0 [ 385.782100] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=188.121.36.239 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=117 ID=19790 DF PROTO=TCP SPT=80 DPT=49348 WINDOW=0 RES=0x00 RST URGP=0 [ 390.640599] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.173 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=59801 DF PROTO=TCP SPT=443 DPT=33688 WINDOW=0 RES=0x00 RST URGP=0 [ 390.797843] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=208.100.17.173 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=59810 DF PROTO=TCP SPT=443 DPT=33688 WINDOW=0 RES=0x00 RST URGP=0 [ 393.648659] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=64.30.230.22 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=12579 DF PROTO=TCP SPT=443 DPT=40082 WINDOW=9300 RES=0x00 ACK RST URGP=0 [ 394.389016] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.220 DST=192.168.50.37 LEN=40 TOS=0x08 PREC=0x00 TTL=54 ID=39750 DF PROTO=TCP SPT=443 DPT=51920 WINDOW=0 RES=0x00 RST URGP=0 [ 394.398024] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.220 DST=192.168.50.37 LEN=40 TOS=0x08 PREC=0x00 TTL=54 ID=39751 DF PROTO=TCP SPT=443 DPT=51920 WINDOW=0 RES=0x00 RST URGP=0 [ 394.877650] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=152.195.15.114 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=49852 DF PROTO=TCP SPT=443 DPT=40200 WINDOW=0 RES=0x00 RST URGP=0 [ 394.943567] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=216.58.205.234 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=121 ID=62468 PROTO=TCP SPT=443 DPT=45320 WINDOW=0 RES=0x00 RST URGP=0 [ 397.147595] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=4364 DF PROTO=TCP SPT=443 DPT=33880 WINDOW=0 RES=0x00 RST URGP=0 [ 397.152185] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=4365 DF PROTO=TCP SPT=443 DPT=33880 WINDOW=0 RES=0x00 RST URGP=0 [ 397.157498] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=56299 DF PROTO=TCP SPT=443 DPT=33882 WINDOW=0 RES=0x00 RST URGP=0 [ 397.161730] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=56300 DF PROTO=TCP SPT=443 DPT=33882 WINDOW=0 RES=0x00 RST URGP=0 [ 397.210861] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=34.199.18.114 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=236 ID=38193 DF PROTO=TCP SPT=443 DPT=59810 WINDOW=0 RES=0x00 RST URGP=0 [ 397.263189] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=42212 DF PROTO=TCP SPT=443 DPT=33878 WINDOW=0 RES=0x00 RST URGP=0 [ 397.267533] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=52 ID=42213 DF PROTO=TCP SPT=443 DPT=33878 WINDOW=0 RES=0x00 RST URGP=0 [ 397.317183] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=34.199.18.114 DST=192.168.50.37 LEN=40 TOS=0x00 PREC=0x00 TTL=234 ID=38217 DF PROTO=TCP SPT=443 DPT=59804 WINDOW=0 RES=0x00 RST URGP=0 [ 476.462472] STATE_INVALID_DROP: IN=wlan1 OUT= MAC=0a:ed: 72:8d:f5:61:9c:c7:a6:84:9b:c6:08:00 SRC=173.241.240.143 DST=192.168.50.37 LEN=40 TOS=0x10 PREC=0x00 TTL=54 ID=27566 DF PROTO=TCP SPT=443 DPT=33876 WINDOW=0 RES=0x00 RST URGP=0 [ 489.106950] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 614.106412] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 739.106042] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e: 00:00:01:9c:c7:a6:84:9b:c6:08:00 SRC=192.168.50.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Which protocol is causing the noise? And is anybody able to understand what that is, seems to be a kind of search or a failed handling of some protocol? How can I switch it off? Thank you. PS. I am suffering from a privoxy problem that I try to debug. Could this be related? (Privoxy listens but traffic is nor resolved via privoxy). _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Q: MySQL 5.7 for Leap 15.0
by Andrei Verovski 29 Nov '18

29 Nov '18

Hi ! For accounting system we need old MySQL 5.7, and NOT newer. Is it available anywhere in repositories (may be private) for Leap 15 ? I looked here, and through software search, not found anything. http://download.opensuse.org/repositories/server:/database/openSUSE_Leap_15… mysql-community-server RPMs here built for very old SLES 11 and can't be installed on leap 15 due to missing library dependencies. https://dev.mysql.com/downloads/file/?id=468312 Thanks in advance Andrei -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Best practices restarting services shown via zypper ps
by cagsm 29 Nov '18

29 Nov '18

13 28

[opensuse] DVD playback in Leap42.3
by Jon Cosby 29 Nov '18

29 Nov '18

I have some collections of shorts on DVDs. After the first short, VLC and GNOME video players lose the audio. Dragon doesn't respond after loading the DVD. I've tried MPlayer, which has always been reliable, but can only get the Spanish translation. libdvdcss is installed, along with the standard codecs. Full-length DVDs aren't any problem. I have GNOME 3.20.4 and KDE 5.8.7 on Leap 42.3. Can someone help me troubleshoot this? Jon Cosby -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 8

[opensuse] cannot mount a LUCKS encrypted usb3 hdd - disk broken or software error?
by stakanov 29 Nov '18

29 Nov '18

I am having a WD disc as external usb3 backup. In the past no problems, but for some time I did not backup. Wanted to do so today but: Before I had it in ext4 but the file system seems not to matter. Currently running the system with the system kernel but the kernel seems not to matter. error message in dolphin, the error is the same whether 4.12 or 4.19 and no matter if XFS or EXT4: "Si è verificato un errore durante l'accesso a «Disco fisso da 931,5 GiB», il sistema ha restituito: L'operazione richiesta non è riuscita: Error mounting / dev/dm-4 at /run/media/entropia/7e04d0f8-bffc-41ae-91c6-509c7a9d2f151: Command-line `mount -t "xfs" -o "uhelper=udisks2,nodev,nosuid" "/dev/dm-4" "/ run/media/entropia/7e04d0f8-bffc-41ae-91c6-509c7a9d2f151"' exited with non- zero exit status 32: mount: /run/media/entropia/7e04d0f8- bffc-41ae-91c6-509c7a9d2f151: can't read superblock on /dev/mapper/cr_ata- WDC_WD10JPVX-22JC3T0_WD-WXW1A372PSED-part1." dmesg: [ 4891.969438] device-mapper: table: 254:5: adding target device sdc1 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2097664 [ 4891.969443] device-mapper: table: 254:5: adding target device sdc1 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=2097664 [ 4903.245763] SGI XFS with ACLs, security attributes, no debug enabled [ 4903.248318] XFS (dm-5): Mounting V5 Filesystem [ 4906.141502] scsi host7: uas_eh_bus_reset_handler start [ 4906.144372] sd 7:0:0:0: [sdc] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD [ 4906.144378] sd 7:0:0:0: [sdc] tag#1 CDB: Read(10) 28 00 00 00 ff ff 00 00 01 00 [ 4906.225425] usb 1-1.1.2: reset high-speed USB device number 7 using ehci- pci [ 4906.379346] scsi host7: uas_eh_bus_reset_handler success [ 4917.603989] XFS (dm-5): Ending clean mount [ 4955.156691] XFS (dm-4): SB validate failed with error -5. journalctl -r nov 29 15:38:33 roadrunner.suse udisksd[2583]: Error performing housekeeping for drive /org/freedesktop/UDisks2/> 0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .....> 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .....> (g-io-error-quark, 0) nov 29 15:38:33 roadrunner.suse kernel: usb 1-1.1.2: reset high-speed USB device number 7 using ehci-pci nov 29 15:38:33 roadrunner.suse kernel: sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 ff ff 00 00 01 00 nov 29 15:38:33 roadrunner.suse kernel: sd 7:0:0:0: [sdc] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD nov 29 15:38:33 roadrunner.suse kernel: scsi host7: uas_eh_bus_reset_handler start nov 29 15:38:33 roadrunner.suse kernel: sd 7:0:0:0: [sdc] tag#1 CDB: ATA command pass through(16) 85 06 20 00 00> nov 29 15:38:33 roadrunner.suse kernel: sd 7:0:0:0: [sdc] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD with EXT4 was: journalctl -r nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: [sdb] Attached SCSI disk nov 29 14:33:30 roadrunner.suse kernel: sdb: sdb1 nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't sup> nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: [sdb] Write Protect is off nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: [sdb] 4096-byte physical blocks nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) nov 29 14:33:30 roadrunner.suse kernel: usbcore: registered new interface driver uas nov 29 14:33:30 roadrunner.suse kernel: sd 6:0:0:0: Attached scsi generic sg1 type 0 nov 29 14:33:30 roadrunner.suse kernel: scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANS> nov 29 14:33:30 roadrunner.suse kernel: scsi host6: uas nov 29 14:33:30 roadrunner.suse kernel: usbcore: registered new interface driver usb-storage nov 29 14:33:30 roadrunner.suse mtp-probe[5670]: bus: 1, device: 6 was not an MTP device nov 29 14:33:30 roadrunner.suse mtp-probe[5670]: checking bus 1, device 6: "/ sys/devices/pci0000:00/0000:00:1a.0> nov 29 14:33:30 roadrunner.suse kernel: usb 1-1.1.2: SerialNumber: AC0000000001 nov 29 14:33:30 roadrunner.suse kernel: usb 1-1.1.2: Manufacturer: Generic nov 29 14:33:30 roadrunner.suse kernel: usb 1-1.1.2: Product: USB3.0 Device nov 29 14:33:30 roadrunner.suse kernel: usb 1-1.1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 nov 29 14:33:30 roadrunner.suse kernel: usb 1-1.1.2: New USB device found, idVendor=174c, idProduct=1053 nov 29 14:33:30 roadrunner.suse kernel: usb 1-1.1.2: new high-speed USB device number 6 using ehci-pci But when trying to access data or the disc "I am not authorized (password correct and root also, the disc shows constantly "accessing drive" before giving up. What is this error? Disk broken or is this a software error? The error in EXT complained a alignment inconsistency of the files system too. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postfächer sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] additional open ports in Leap 15.0 firewall
by Istvan Gabor 29 Nov '18

29 Nov '18

Hello: In previous openSUSE versions I could add/open additonal ports to/in the firewall in yast / firewall / Allowed Services / Additional Allowed Ports / separate lines for TCP, UDP ports. How can I do the same in the firewall configurator of Leap 15? I guess I have select a zone then choose ports tab and click add button. But I don't know which zone to select from the many: dmz, external, public, work? I guess the configuration should be permanent. permament - survives reboot runtime - doesn't survive reboot. Is this correct? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] visited links' color in firefox quantum
by Istvan Gabor 28 Nov '18

28 Nov '18

Hello: I have set openSUSE list visited color link in userChrome.css as: @-moz-document domain("lists.opensuse.org") { a[href]:visited {color: #990000 !important;}} This works perfectly in Pale Moon browser. Recently I installed firefox quantum 60.3.0esr and added the above code to its userChrome.css but is has no any effect. I snipped the code to a[href]:visited {color: #990000 !important;} and it has no any effect either on visited links' color. I googled but could not find anything relevant. What would be the correct code in firefox quantum? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1