-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
In one computer (Isengard), on /etc/default/grub I got:
GRUB_CMDLINE_LINUX_DEFAULT="resume=/dev/sda2 splash=verbose showopts resume=/dev/disk/by-label/Swap splash=silent quiet showopts"
which I had to change back to the correct one:
GRUB_CMDLINE_LINUX_DEFAULT=" showopts resume=/dev/disk/by-label/Swap splash=verbose"
Why change that line at all, adding the same options (not
replacing) with unpredictable results?
On another computer (Minas-Tirith), I get a similar issue:
GRUB_CMDLINE_LINUX_DEFAULT="resume=/dev/disk/by-label/Swap splash=verbose console=tty1 loglevel=3 showopts resume=/dev/disk/by-label/Swap splash=silent quiet showopts"
It seems that what it thinks are the correct options are added to the end
of the line.
Correct line:
GRUB_CMDLINE_LINUX_DEFAULT="resume=/dev/disk/by-label/Swap splash=verbose console=tty1 loglevel=3 showopts"
On this computer I got a grub error during the update, of which I took a
photo; fortunately it did not impede reboot, but I have no idea what it
means.
Execution of command *[[*/usr/sbin/grub2-install* ... failed.
Exit code 1
Error output: Installing for i386-pc platform.
/usr/sbin/grub2-install: error: the drive hd0 is defined multiple times in
the device map /boot/grub2/device.map
Well, the file contains:
(hd0) /dev/sda
(hd0) /dev/sda
(hd1) /dev/sdb
This error I can find in the /var/log/YaST2/y2log-1.gz file:
2018-01-26 13:36:54 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Found initrd image: /boot/initrd-4.4.104-18.44-default
2018-01-26 13:36:54 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Found linux image: /boot/vmlinuz-4.4.103-18.41-default
2018-01-26 13:36:54 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Found initrd image: /boot/initrd-4.4.103-18.41-default
2018-01-26 13:36:55 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: /run/lvm/lvmetad.socket: connect failed: No such file or directory
2018-01-26 13:36:55 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: WARNING: Failed to connect to lvmetad. Falling back to internal scanning.
2018-01-26 13:36:58 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Found Windows 10 (loader) on /dev/sda1
2018-01-26 13:37:00 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Found Windows Recovery Environment (loader) on /dev/sda2
2018-01-26 13:37:02 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Found openSUSE 42.2 (x86_64) on /dev/sda9
2018-01-26 13:37:05 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: done
2018-01-26 13:37:05 <1> install(3382) [Ruby] lib/cheetah.rb:178 Status: 0
2018-01-26 13:37:05 <1> install(3382) [Ruby] bootloader/device_map.rb:36 writing device map: Device Map: {"hd0"=>"/dev/sda", "hd1"=>"/dev/sdb"}
2018-01-26 13:37:05 <1> install(3382) [Ruby] lib/cheetah.rb:158 Executing "/usr/sbin/grub2-install --target\=i386-pc --force --skip-fs-probe /dev/sda4".
2018-01-26 13:37:05 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: Installing for i386-pc platform.
2018-01-26 13:37:05 <3> install(3382) [Ruby] lib/cheetah.rb:206 Error output: /usr/sbin/grub2-install: error: the drive hd0 is defined multiple times in the device map /boot/grub2/device.map.
2018-01-26 13:37:05 <3> install(3382) [Ruby] lib/cheetah.rb:178 Status: 1
2018-01-26 13:37:05 <3> install(3382) [Ruby] yast2/execute.rb:63 Execution of command "[["/usr/sbin/grub2-install", "--target=i386-pc", "--force", "--skip-fs-probe", "/dev/sda4"]]" failed.
Exit code: 1
Error output: Installing for i386-pc platform.
/usr/sbin/grub2-install: error: the drive hd0 is defined multiple times in the device map /boot/grub2/device.map.
2018-01-26 13:37:05 <1> install(3382) [ui] YPushButton.cc(setFunctionKey):202 Guessing button role YOKButton for YPushButton "OK" at 0x7f7590078220 from function key F10
2018-01-26 13:38:45 <1> install(3382) [Ruby] bootloader/mbr_update.rb:20 Stage1: <Bootloader::Stage1 128846140 activate: true generic_mbr: true devices: ["/dev/sda4"]>
2018-01-26 13:38:45 <2> install(3382) [qt-ui] YQUI.cc(qMessageHandler):675 <libqt-warning> QXcbConnection: XCB error: 3 (BadWindow), sequence: 51769, resource id: 4195224, major code: 40 (TranslateCoords), minor code: 0
- --
Cheers
Carlos E. R.
(from 42.2 x86_64 "Malachite" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEARECAAYFAlprfa0ACgkQtTMYHG2NR9VWzACfRuLDjyCNGfeVZQv7h3p4tXhd
0CgAniiJuk0MTM1QeHibmKSUcpmTCuIL
=IgHi
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hi,
does someone know where okular is getting the printer list from?
When I try to print something okular hangs for the next few minutes, obviously
trying to contact some printers it found/knows.
Starting from command line I can see
begin enumerating printers
printomat _ _ 1
HP_Color_LaserJet_MFP_M277dw_Peter_s_MacBook_Pro _ _ 2
HP_Color_LaserJet_4700_tine_thinkpad _ _ 3
HP_DeskJet_5820_series_Poonam_s_MacBook_Pro _ _ 4
end enumerating printers
1 (printomat) is the only one defined in cups (as local queue, smb printer)
I disabled cups-browsed, Browsing in cupsd.conf is 'No', too
An 'lpstat -a' only lists the printomat printer.
Is okular/kde browsing by itself? Or is this some cache corpse from earlier?
It's really annoying having to wait that long for printing something :((
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
I am just installing a new xen guest with leap423 - I notice there are
68 'bioset' threads running? What are those all for? (just being
curious).
--
Per Jessen, Zürich (7.2°C)
http://www.hostsuisse.com/ - virtual servers, made in Switzerland.
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I'm right now in the process of upgrading one of my machines from 42.2 to
42.3 (DVD offline method). Ahead of the procedure I edited the repos URL
to point to the 42.3 version, and did a "zypper ref" to verify that the
URL were correct.
However, when actually running the upgrade, YaST is complaining that it
can not find the files:
(hand copied)
http://packman.inode.at/suse/openSUSE_Leap_42.3
file
./Essentials/x86_64/libavfilter....rpm
I have to hit "Skip", maybe hundreds of times. There is no chance to edit
the url, see what is happening and solve it.
- --
Cheers
Carlos E. R.
(from 42.2 x86_64 "Malachite" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEARECAAYFAlpp5nYACgkQtTMYHG2NR9W3IQCeIpBsn1o+XCbYESJtSX7Au6LU
FKsAnj5/cZFqPAVyqBR2tKym8lURAU+S
=tdIu
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
I have been running Tumbleweed on a iMac and it had been going great.
The other day I was doing an update. When I checked progress, I saw
that the power was off! It is not a laptop. I have no idea how the
power could have been off.
I have to boot with a previous kernel. And I do not get wlan. So I
thought I would undo the changes with snapper. The new kernel stops
when it accesses the initrd.
Unfortunately, it complains that there are no configs. I have never
seen an openSUSE install not set up snapper. Could this have happened?
Or could it be that it lost the config info when things went bad?
I really would like to recover this install. (Do I have a backup?
Umm.... It is just a home system used as a convenience.No data to
protect. But, yeah, I know...)
Is there any way that I can determine if snapper was in fact set up,
but that the config just lost? Or anything else I might do?
--
Roger Oberholtzer
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hi,
On my Leap 42.2 laptop I can't print PDF's in their original size. When
I print then they come out scaled to an A5 when the original is an A4.
That's with Okular.
Is there some configuration I miss ? I searched for some scale-effect
but I seem not to find it.
TIA.
Koenraad
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hi all,
Anyone around who succeeded in doing a kinit, based on the credentials
locked into a smartcard.
Obviously not an amateur endeavour, so any experience with any distro /
any version ?
Started today exploring, with absolute zero access to the kerberos
server.
I can do a kinit providing username@REALM, and after supplying PWD, i do
see with klist my TGT
Q1) Is it enough to configure krb5.conf on the client?
One search tells me:
PKCS11:[module_name=]modname[:slotid=slot-id][:token=token-label][:certid=cert-id][:certlabel=cert-label]
While another tells me that I also should provide the certificate of the
kerberos-server
Initially I'll test from inside, so hardly any firewall issues.
But I know for sure, I'll have to ask to tweak our firewall, when trying
from outside.
Q2) Should opening of TCP-port 88 be enough, or is that impossible to
predict?
(and before telling, yes, i know this is rather
client/server-time-critical)
Kind regards, Hans
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
I'm running 42.3. One thing I've noticed is that the domain name, as
entered in the Domain Name box, in Yast Network Settings, doesn't last
through a reboot. It also gets removed from /etc/resolv.conf.
Any idea why this happens? How to fix it?
tnx jk
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hi, all! Happy New Year :-)
I'm running Leap 42.3
davidtg@wench:~> egrep 'VERSION|NAME' /etc/S?SE* /etc/os-*
/etc/SUSE-brand:VERSION = 42.1
/etc/SuSE-release:VERSION = 42.3
/etc/SuSE-release:CODENAME = Malachite
/etc/os-release:NAME="openSUSE Leap"
/etc/os-release:VERSION="42.3"
/etc/os-release:VERSION_ID="42.3"
/etc/os-release:PRETTY_NAME="openSUSE Leap 42.3"
/etc/os-release:CPE_NAME="cpe:/o:opensuse:leap:42.3"
(although the OS appears to be confused about itself a bit :-) and have
some questions as I move in. One biggie is where best to put localized
configs -- hosts file, profile, language setting, etcetc -- so that they
will not only survive an upgrade but be easy to keep and transfer into a
fresh install again one day.
This is on a personal laptop that will likely be one of at most a handful;
I'm not running an enterprise, and while I like structure and organization
the ROI of creating an enterprise-level framework just isn't there. What
do you recommend?
TIA & HAND
:-D
--
David T-G
See http://justpickone.org/davidtg/email/
See http://justpickone.org/davidtg/tofu.txt
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hi *,
I'm missing recode since the before last Tumbleweed snapshot.
Has it been removed deliberately or by mistake?
Can it be readded?
TIA.
Bye.
Michael.
--
Michael Hirmke
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org