December 2017 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Latest firmware update (intel graphics) destabilize ironlake chipset
by Carlos E. R. 22 Dec '17

22 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 You forgot to post to the list. > Carlos E. R. wrote: >> On Thursday, 2017-12-21 at 16:22 +0100, Rainer Fiebig wrote: >> >>> stakanov wrote: >>>> Just to let people know (I do not know if this is worth a bug report >>>> as older hardware is considered "older hardware". Unfortunately it is >>>> a perfectly functional "older hardware"...) With the 4.x versions of >>>> the leap kernel the stability of the system was admittedly not great >>>> (max uptime 1d and a few hours) but still you had a day to work >>>> peacefully. With the firware update time to graphics crash under kde >>>> plasma 5 is from some minutes to maximal 2-3 hours. And that without >>>> any suspend to ram or to disc (that was the issue before). >> >>> The i915-driver of 4.4.x doesn't work properly for Ironlake-GPUs - at >>> least not if you use s2disk/s2both (see >>> https://bugs.freedesktop.org/show_bug.cgi?id=99737) >> >> >> There is no more s2disk in openSUSE. >> It was superseded by systemd. > > pm-hibernate then. Doesn't matter here. The Intel-graphics-driver in There is nothing pm-* either. Again, it is systemd, not pmutils anymore. The current call is "systemctl hibernate". > kernels >= 4.3 <= 4.7 doesn't work properly with Ironlake-GPUs. So if he > wants to use the equivalent of s2disk/s2both with that GPU he can either > use another kernel or get new hardware. I'd rather switch the kernel. - -- Saludos Carlos E. R. (desde openSUSE 42.2 x86_64 "Malachite" en Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlo8RcgACgkQtTMYHG2NR9Xx/wCfbo6BaNqY3czVg9+6ojR56iOH 6WAAn3bS3Hl9ZXFx5m9rBMBRjaMuyYDj =P73z -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] trying to install dbus-1-python - depends on bumblebee' ??
by Per Jessen 21 Dec '17

21 Dec '17

I'm configuring a new storage server (leap423) and tried to run targetcli-fb. It seems I need a module 'dbus' which is provided by 'dbus-1-python'. Trying to install that means adding about 200 other packages :-( - with "-no-recommends", the selection is reduced to a mere 42: The following 42 NEW packages are going to be installed: bumblebee dbus-1-glib dbus-1-python fontconfig girepository-1_0 libcairo2 libdatrie1 libdrm2 libfltk1 libfreetype6 libgbm1 libgirepository-1_0-1 libGLU1 libharfbuzz0 libpango-1_0-0 libpixman-1-0 libpng16-16 libthai0 libthai-data libturbojpeg0 libwayland-client0 libwayland-server0 libX11-xcb1 libxcb-dri2-0 libxcb-dri3-0 libxcb-present0 libxcb-render0 libxcb-shm0 libxcb-sync1 libxcb-xfixes0 libXfixes3 libXft2 libXinerama1 libXrender1 libxshmfence1 libXv1 Mesa-libEGL1 primus python-gobject python-xml typelib-1_0-Pango-1_0 VirtualGL Why on earth would I want to install e.g. bumblebee? libthai0? X stuff? drm? fonts? turbojpeg? I locked out 'Mesa' and 'bumblebee', and provided I accept breaking some dependencies, the selection looks much more reasonable: The following 3 NEW packages are going to be installed: dbus-1-glib dbus-1-python python-xml It would appear that 'bumblebee' or 'Mesa' is the culprit - but how is that related to dbus-1-python? -- Per Jessen, Zürich (3.1°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Lowering the MTU
by Mikhail Ramendik 21 Dec '17

21 Dec '17

Hello, (trying to rephrase a failed thread) I have Leap 42.3 I am having issues with a new wireless dongle and I suspect I could fix them by lowering the MTU (ping is stable, some transfers hang, causing this suspicion). But somehow, no matter what I do, MTU remains at 1500. Using yast, I set it to 1400 in the /etc/sysconfig editor (then rebooted), and it is also at 1400 in the network settings editor, but it is still 1500 in the ifconfig output. A setting on the router side does ont seem to be available. So how do I force the MTU (for wlan1) to 1400? Thanks! -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] opensuse latest live usb distro?
by ken 21 Dec '17

21 Dec '17

Where can I find the newest live usb? Searching around, http://download.opensuse.org/distribution/13.2/iso/openSUSE-13.2-GNOME-Live… is the most recent I can find. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] Re: [opensuse-kde] Kontact email send problems
by Ianseeks 21 Dec '17

21 Dec '17

Please Ignore - sent to wrong list On Thursday, 21 December 2017 09:45:04 GMT Ianseeks wrote: > Hi > > Is anyone else experiencing a problem sending emails from kontact? > > It seems every email i send via kontact fails with a server error and this message is shown in the email you open in the outbox > "Dictionary was not found. Please verify that you will use a correct dictionary." > > It seems related to this https://bugs.kde.org/show_bug.cgi?id=356283 as the message "Grantlee theme "" is not valid" shown in akonadiconsole > > I can sometimes clear the problem by exiting kontact, stopping akonadi (just drops out with no messages most of the time), restart akonadi, do a fsck/vacuum then send the email from kmail instead of kontact (i sometimes have to delete the failed one and create a new one). But this only seems to work once. > > Regards > > Ian > > -- opensuse:tumbleweed:20171218 Qt: 5.9.3 KDE Frameworks: 5.40.0 - KDE Plasma: 5.11.4 - kwin 5.11.4 kmail2 5.7.0 - akonadiserver 5.7.0 - Kernel: 4.14.6-1-default - xf86-video-nouveau: 1.0.15 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Wine applications slowing down more with ever Tumbleweed upgrade
by Christopher Myers 20 Dec '17

20 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 It seems like with every Tumbleweed upgrade, it takes longer and longer for my Wine applications to load. After they're loaded they seem to be fine, it's just that first initial start. I've tried kicking them up from the command line but haven't seen anything useful. Is this a known issue, or is there a good way to troubleshoot it? Chris -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEE7GM/Dul8WSWn72odQ1nEo4DFCIUFAlo6hrEACgkQQ1nEo4DF CIUoAwgAgQDKj9ld98cKWumf0p+1MSwultEMobtzpjBMunlvBhgY65KKnnU1Xzd0 jjWEdnZFkLOBv+HkYmTTo6M95OyY2ybgzO58lDSqSqgEFmsFOCLydPbWJtlDd3bd +v8GqCtmIeVuI3NmHbI5cTwB/IMA9J04DurnBOmY8t58GBVNBPqz9rsYsLwySc6r xuJ88Xs3gYyfkQ4wq0PrZLrg+o7G/T8wswDLRDEGPV3og/Z1yjjLfPxL6DT2Zaar QVaU6DqkTvUl9e4vrVqy2NC+BG2D4sQW42fR0m2TzR5pLBuYFxN2OKFyYwhex2Xq WYcNYTAMTysOIIxiL3dP4vy809fnnA== =ckKn -----END PGP SIGNATURE-----

1 0

[opensuse] USB3 mounts going away
by David T-G 20 Dec '17

20 Dec '17

Hi, all -- I wanted to mirror some data from one portable drive to another, so I plugged 'em in to my [new to me] Dell E6540 with SuSE to run rsync. Nothing automagically* showed up in the fstab file for me to use, so I let the notifier popup open the file manager for each of them, which then mounted them under /run/media/root/<vol-label> and away we went. Curiously, though, just minutes into the copy one or the other would disappear. Sometimes, by the time I walked past and saw the problem, the drive would [again?] be visible and I could click to open another file manager; sometimes it wouldn't show and I had to unplug the device to let it be recognized when I reconnected it. After a few of those, I got tired of the problem and just manually made /mnt/<vol-label} mount points and mounted 'em directly, but they STILL fell away. Uh oh. Do I suddenly have device issues? Did I buy a dud laptop? [Oh, and I am almost positive I rebooted at least once along the way just for giggles.] I took my Knoppix thumb drive out of my pocket and booted on that and -- on the same laptop with the same drives in the same USB slots -- we've been happily copying all night long and are still going strong. Yay that I don't have any hardware issues, but ... what's up with SuSE and its peripherals management? * I'll have to learn separately about USB and SD slot recognition, since I'd like to be able to mount something easily and without having to go and click somewhere, but that can be a separate thread. TIA & Happy Holidays :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 5

[opensuse] What is the current HowTo to get suspend to RAM working on Leap?
by David C. Rankin 20 Dec '17

20 Dec '17

All, What is the current link for getting s2ram working on Leap? I find https://en.opensuse.org/SDB:Suspend_to_RAM but that appears a bit old. I would like to get suspend working on my laptop, what is a good link to do this with leap? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] What file do I edit to fix 'systemd-modules-load' Failure?
by David C. Rankin 20 Dec '17

20 Dec '17

All, I have had this frustrating error on boot of Leap 42.2 ever since I installed, then uninstalled, the Nvidia drivers for my laptop. (I have since reinstalled the drivers after we got the backlight bug triaged and a xrandr workaround). However, I still have this nagging module fail to load error on every boot -- which I've ignored, but want to fix before attempting a 42.3 upgrade. The error is: Dec 19 19:18:54 wizard systemd-modules-load[110]: Failed to insert 'ppp_mppe': No such device Dec 19 19:18:54 wizard systemd-udevd[191]: Network interface NamePolicy= disabled by default. Dec 19 19:18:54 wizard systemd-modules-load[110]: Inserted module 'sg' Dec 19 19:18:54 wizard kernel: SCSI subsystem initialized Dec 19 19:18:54 wizard systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE Dec 19 19:18:54 wizard systemd[1]: Failed to start Load Kernel Modules. Dec 19 19:18:54 wizard systemd[1]: systemd-modules-load.service: Unit entered failed state. Dec 19 19:18:54 wizard systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. I don't know why it is looking for 'ppp_mppe' and don't know if it was related to the nvidia driver install/remove/reinstall, but it has been present ever since. There must be some file in the systemd-modules-load chain that is trying to load the module. What is that file and where does it live so I can go delete the 'ppp_mppe' entry. There is nothing in /etc/modules-load.d/, so where to check? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] zypper hangs - strange network-related issue?
by Mikhail Ramendik 20 Dec '17

20 Dec '17

Hello, When I start zypper in something, zypper sometimes hangs. I have looked into /var/log/zypper.log and here is where it hangs: https://pastebin.com/5EPs2gyW The last line is: 2017-12-20 02:36:20 <1> ramendik-desktop(22593) [zypp++] MediaCurl.cc(doGetDoesFileExist):1195 URL: http://download.opensuse.org/distribution/leap/42.3/repo/oss/content However, pings to download.opensuse.org pass successfully. What might be going on? -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6