November 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] kmail must have missed an update in the past
by C. Brouerius van Nidek 24 Nov '17

24 Nov '17

Remember that in the past pop emails could be found under " ~/.local/share/akonadi_maildir_resource_0" At the moment nothing is to be found in that directory but everything is found instead under the old directory "~.local/share/.local-mail.directory" Kmail is for the moment working satisfactory but I have the feeling that not all functions are working but there is nothing I miss . Is there a way to get the emails transferred to the directory "akonadi_maildir_resource_0" or should I keep it where it is now? -- opensuse:tumbleweed:20171122 Qt: 5.9.2 KDE Frameworks: 5.40.0 kf5-config KDE Plasma: 5.11.3 plasmashell 5.11.3 Kernel: 4.14.0-1-default~ Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Hackweek project: encrypted installation media
by Steffen Winterfeldt 23 Nov '17

23 Nov '17

Hi, - You’re still carrying around your precious autoyast config files on an unencrypted usb stick? - You have a customized installation disk that could reveal lots of personal details? - You use ad blockers, private browser tabs, or even tor but still carry around your install or rescue disk unencrypted for everyone to see? - You have your personal files and an openSUSE installation tree on the same partition just because you are lazy and can’t be bothered to tidy things up? - A simple Linux install stick is just not geekish enough for you? *** Not any longer! *** Interested? Check out the result of my Hackweek project: https://lizards.opensuse.org/2017/11/17/encrypted-installation-media/ Steffen -- Give orange me give eat orange me eat orange give me eat orange give me you. (chimp Nim, using sign language) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] Where are listed modules included in initrd in Leap 42.x ?
by andreil1 23 Nov '17

23 Nov '17

Hi ! Where are listed modules included in initrd in Leap 42.x ? /etc/sysconfig/kernel - this file doesn’t exists at all /etc/dracut.conf.d - not here Thanks in advance Andrei -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 12

[opensuse] Can't scp files to Tumbleweed box anymore?
by Christopher Myers 22 Nov '17

22 Nov '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 I'm not 100% sure at what point this broke, but I do know that it's been working sometime in the last few weeks. I regularly SCP log files from our servers to my Tumbleweed laptop for sending off to vendors, etc. However, the last few days I've noticed that this doesn't work anymore. I can pull them from my laptop successfully, but can't push them to my laptop. But, I don't see any errors reported by SCP, even with -vvv This is the results of the "-vvv" when trying to push a file from a server to my laptop (which doesn't work): http://susepaste.org/385d7b71 This is the results of the "-vvv", when trying to pull a file from a server onto my laptop (which does work): http://susepaste.org/f8874577 (Both of these logs start after I enter my authentication, either my password (for server to laptop) or SSH key passowrd (for laptop from server)) I've tried pushing files from: RHEL5 RHEL6 SLES12 openSuSE 13.2 but none of them are able to send the file successfully. I'm able to pull files from them all though. Also, this all used to work on all of these boxes until recently. I'm currently running oS Tumbleweed 20171113, but this was happening during my last version as well (I'm guessing I installed the last update the middle of last week.) Any ideas?? Chris -----BEGIN PGP SIGNATURE----- iQEzBAEBCgAdFiEE7GM/Dul8WSWn72odQ1nEo4DFCIUFAloMY6QACgkQQ1nEo4DF CIUUkwf8D/SyRimGRo9pIvfz+POsZf6gIxIc7ZMdzWvHsQo3FdHtMlcoE+Hg7X/s A+QQZ4uFKE4UMkl679b+C8F6WOv75leFrBJWC7YvH9c0rQ2os0wuujDM9R6zE7UK 3WS98YwwjCm/QYXZ+wyThYKNXZ8DqzajoOaFTkTmzSS8eWeBE3ngu1zuZDiSKf8D gnSdJumjrX1YKNyWwuw5s0e5koASD7u5OHXUTG+0C+zBnCT2DYXF792KsgK5bvy8 T7hu/pgZji1CLdMKQge0PFP7bg1MEzJLpo2AbSBZsccJOVAGExEOJNEmVmpoI/mb jQRi7AUXwCI5NRtvoSifLN+k/DM0tQ== =0VdM -----END PGP SIGNATURE----- N��r��y隊Z)z{.�ﮞ˛��m�)z{.��+�:�{Zr�az�'z��j)h��Ǿ� ޮ�^�ˬz��

6 14

[opensuse] Different TRIM Behavior in LEAP than SLES?
by Eric Robinson 22 Nov '17

22 Nov '17

I have 2 Dell servers which formerly had SLES 12 SP2 installed, and fstrim worked fine on my SSD drives. Then I formatted both systems and installed LEAP 42.3. Now I get the following on both... fstrim: /: the discard operation is not supported No hardware has changed. The only thing that changed is the OS. Does LEAP disable some kind of TRIM functionality? --Eric -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Amarok progress bar sluggish
by James Knott 22 Nov '17

22 Nov '17

I've been using Amarok for years to listen to music. However, lately there seems to be a problem with the progress bar that shows the position in the music. Instead of moving steadily, along with the times displayed changing, as the music plays, the display seems to freeze. Then at some point it will jump and freeze again. At the moment, one song is playing, but the displays shows the previous song about 2/3 the way through. This is a very recent issue. Has anyone else noticed it? I'm running KDE on Leap 42.3. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] dd clone disk resulted in non-bootable system
by andreil1＠starlett.lv 22 Nov '17

22 Nov '17

Hi, I have cloned 1TB hard drive to 3TB hardware RAID 5 with dd if=/dev/sda of=/dev/sdb bs=64K conv=noerror,sync status=progress For whatever reason system don't start after boot prompt, its seems root partition can't be mounted. I checked in partition manager UUID of new cloned system - it remained the same and listed in /etc/fstab correctly. What I missed there ? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 38

[opensuse] logwatch and logdigest both fail
by Patrick Shanahan 22 Nov '17

22 Nov '17

openSUSE Leap 42.2 server logwatch and logdigest both fail since 09 Nov 17 with: running daily cronjob scripts Terminated SCRIPT: logdigest exited with RETURNCODE = 143. SCRIPT: output (stdout && stderr) follows compress_ext is /usr/bin/xz compress_ext was changed to .xz SCRIPT: logrotate and running daily cronjob scripts Terminated SCRIPT: 0logwatch exited with RETURNCODE = 143. SCRIPT: output (stdout && stderr) follows compress_ext is /usr/bin/xz compress_ext was changed to .xz SCRIPT: logrotate /etc/logrotate.conf weekly rotate 4 create dateext compresscmd /usr/bin/xz uncompresscmd /usr/bin/xzdec compressext .xz include /etc/logrotate.d wtf help pls :) -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 9

[opensuse] alsa-mixer.c: Failed to set switch of Speaker: Input/output error
by listreader 20 Nov '17

20 Nov '17

Brand new Dell Precision Workstation T3620 Mini Tower. I installed Leap 423 with an XFCE desktop and was working fine. Until today. Multiple hiccups. Don't know whether they are related or not so I'll post them in separate threads. This is 2-of-2: I had pulseaudio installed. The speaker would switch off. Checking I found that pulseaudio had switched to "headphones (plugged in)" which they were not, and "speakers" showed as "not available". I used yast2 sound module to reset/reload the card. That works. Pulseaudio shows speakers as live. Short time later, speakers go off again. Looking in the journal I see... "[alsa-sink-ALC3861 Analog] alsa-mixer.c: Failed to set switch of Speaker: Input/output error" "[alsa-sink-ALC3861 Analog] alsa-mixer.c: Failed to set switch of Headphone: Input/output error" ...repeated multiple times in multiple places. I uninstalled pulseaudio. Problems appear to be gone - no further speaker and headphone switch problems either real or in journal. Sound is ok (but very low volumn). But I'd like to put pulseaudio back for use with the "Skype Preview" (i.e. beta) and etc. Any ideas what I should be looking at? Thanks! Ralph -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Which is the proper method to set the language in XFCE?
by Carlos E. R. 20 Nov '17

20 Nov '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I do not see a setting to set the user language in XFCE, different from the system language. Traditionally I use the file .i18n file, like this: LC_TIME=en_DK.UTF-8 LC_MONETARY=es_ES@euro LC_NUMERIC=es_ES@euro LC_PAPER=es_ES@euro LC_TELEPHONE=es_ES@euro LC_MEASUREMENT=es_ES@euro LC_NAME=es_ES@euro which works. But if I try to set the entire environment to Spanish, it fails: LANG=es_ES.utf8 I get English (this is already reported in Bugzilla). Is there another "correct" way to set the language per user on XFCE? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAloJkLYACgkQtTMYHG2NR9X+TgCgigy+z8IRf5cgRt03e+Y1M1pq j+IAn0PxMr0wYLFAb8A1YWx3xdZD+ts/ =zJJo -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 23