December 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] leap422 okular printing issue
by Per Jessen 14 Dec '16

14 Dec '16

Printing an A4 page from Okular makes it come out scaled down to what looks like 2/3 size. Printing to the same printserver from 13.1 works fine. I don't even know where to begin to look. Any hints? -- Per Jessen, Zürich (1.0°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

Re: [opensuse] leap422 okular printing issue
by stakanov＠freenet.de 14 Dec '16

14 Dec '16

> -----Ursprüngliche Nachricht----- > Von: Per Jessen > Gesendet: Mi. 14.12.2016 11:49 > An: opensuse(a)opensuse.org > Betreff: Re: [opensuse] leap422 okular printing issue > > Per Jessen wrote: > >> stakanov(a)freenet.de wrote: >> >>>> -----Ursprüngliche Nachricht Ende----- >>> Sorry if this should be a "thred breaker" but I haven't yet been >>> accepted by another mailer (ip problem it seems). So, to make it >>> short: I am using 42.1 and Lexmark. With 13.1-13.2 no problems. But >>> with 42..1 I had quite a few with scaling. It boils down to the point >>> that with 13.2 and before, the printersettings in the printerfirmware >>> where ingnored or overridden. With 42.1 if there is Legal in the >>> firmware of the printer as size and A4 in the settings of >>> yast.....the thing prints badly formatted. >> >> The only YaST setting I ever use wrt printers is the first one to >> activate network printers, otherwise I never use YaST for anything >> printer-related. Anyway, according to the web-interface on the >> printer, it has A4 in the two input tray, and C5 in the multi-form >> feeder (for envelopes). Normally every print-job could ask for a >> different size and a different media. >> >>> When I did find out and corrected, within the firmware, to A4, the >>> problem stopped. This could also be your case. Look if you do not >>> have B4 or B5 setted for what ever reasons in your printer firmware. >> >> I'm not sure where to look for that. The scaled down output looks >> like it could be A5 size, but it was also shifted about 2cm to the >> right, cutting off those 2cm. >> >>> Or if it is et to "enveloppe". >> >> It looks too small for C5. >> >>> With me that caused disturbances in 42.1 that did NOT manifest before >>> with the very settings. Hope that helps. Controll also the settings >>> in yast. >> >> I'll check. > > There are no page-size related settings in YaST for this printer. It's > all about whether it is the default and which driver to use > (currently 'raw'). > > > > -- > Per Jessen, Zürich (0.6°C) >http://www.hostsuisse.com/ - dedicated server rental in Switzerland. > > > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- Sorry for being intrusive, in what way you talk to the printer? TCP, IPP, LDP, IPP via CUPS? Raw has sometimes some issue (e.g. if you use a printserver at home you will find that with the AVM Fritzbox you may run into issues with raw, with other servers it may depend on the producer) but mainly due to limitations of the protocol itself. You said you did print the very same(!) document in 13.2 and it worked? Or did you print other documents and they print out well. I trust you did try with another old one (pdf), known to work, to check if this is pdf or raw related? When I had a problem with AVM I changed from IPP to LDP. It was at the time a bit tedious because I had to find out the right setup but worked afterwards. But my Printer was on the usbport of the Fritzbox and the communication via ethernet. I think the most important would be first to check with another PDF, if you haven't done it already of course. If the PDF was created with some special adobe software a vendor lock in is possible. Some of the adobe formats are not working well with OSS (guess why). --- Die Bundesliga hat begonnen! Alle Tore, alle Ergebnisse, alle News: Pocket Liga jetzt im https://app.adjust.com/dpynzd oder https://app.adjust.com/dpynzd herunterladen - kostenlos! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Scary Suse? R me being hax0red?
by cagsm 14 Dec '16

14 Dec '16

Some sudo command give me the funny reply?! What the hecks? Is this serious? Found on a current leap 42.2 > sudo smbstatus -L > root's password: > Listen, burrito brains, I don't have time to listen to this trash. Never seen this message before on a bad password typo? Suse is scaring me :( -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 13

[opensuse] access logs on Nov 30
by jdd 14 Dec '16

14 Dec '16

Hello, Some malicious files where written to my openSUSE (13.1, I know... obsolete :-() on nov 30 How can I trace what access was used, I suspect ftp, but it may also be php thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 14

[opensuse] Remote sound app advice
by Roger Oberholtzer 14 Dec '16

14 Dec '16

I often connect to remote systems via vncviewer (remote is Linux) or rdesktop (remote is Windows). It works great to share the remote desktop with a remote user. One thing I miss is to be able to talk to the remote user at the same time. Obviously, the telephone works. But where is the challenge in doing that? Does anyone have a suggestion for an app supported on openSUSE that allows this? Something that is not too complicated. We don't need conference calls or anything fancy. Just two computers, each with a mic and speakers. If we stay with Linux on both sides, we can add KDE into the mix as that is the desktop on both ends. I see many apps. But they always seem so involved. And some like a server to mediate connections. I would like to avoid that if possible. Just two client apps that talk to each other. Looking forward to suggestions. Preferably ones where the apps are actually used. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 15

Re: [opensuse] access logs on Nov 30
by jdd 14 Dec '16

14 Dec '16

Le 13/12/2016 à 18:14, Darin Perusich a écrit : > Check the owner/group/time-stamps of these malicious files I was sure I could make an error... I copied out the faulty folder, but didn't do this as root and so the owner is no more the initial one. At first glance I only noted the date (nov 30) and try and > correlate those with entries in your ftp/apache/susefirewall/app logs. yes but where are these logs. No "ftp" in /var/logs. Probably some syntax with journalctl I certainly have them for the FW yes, I have them and for the dedicated day. but there are 15223 lines... how can I find the lines giving access to the computer? what have I to search for? > If you don't have logging enabled for said app then shame on you, if log > entries for those times are "missing" you've been pwned. Don't forget > logs from your router, if you're storing them, since they may also be > able to help correlate the connections/activity. > it's a hosted computer, online, no router thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] xdg-open + cups
by listreader 13 Dec '16

13 Dec '16

"http://localhost:631/" in a browser opens cups management as expected but "xdg-open http://localhost:631/" does not and instead opens an index view of /home in a webpage. Why? Thanks. Ralph Leap 42.1 / LXDE (gtk) Linux -.- 4.1.36-38-default #1 SMP PREEMPT Sun Dec 4 07:24:39 UTC 2016 (6c3b351) x86_64 x86_64 x86_64 GNU/Linux Firefox 50.0.2 Cups 1.7.5 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

Re: [opensuse] access logs on Nov 30
by Darin Perusich 13 Dec '16

13 Dec '16

Check the owner/group/time-stamps of these malicious files and try and correlate those with entries in your ftp/apache/susefirewall/app logs. If you don't have logging enabled for said app then shame on you, if log entries for those times are "missing" you've been pwned. Don't forget logs from your router, if you're storing them, since they may also be able to help correlate the connections/activity. -- Later, Darin On Tue, Dec 13, 2016 at 12:14 PM, Darin Perusich <darin(a)darins.net> wrote: > Check the owner/group/time-stamps of these malicious files and try and > correlate those with entries in your ftp/apache/susefirewall/app logs. If > you don't have logging enabled for said app then shame on you, if log > entries for those times are "missing" you've been pwned. Don't forget logs > from your router, if you're storing them, since they may also be able to > help correlate the connections/activity. > > -- > Later, > Darin > > On Tue, Dec 13, 2016 at 9:48 AM, jdd <jdd(a)dodin.org> wrote: >> >> Hello, >> >> Some malicious files where written to my openSUSE (13.1, I know... >> obsolete :-() on nov 30 >> >> How can I trace what access was used, I suspect ftp, but it may also be >> php >> >> thanks >> jdd >> >> -- >> To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org >> To contact the owner, e-mail: opensuse+owner(a)opensuse.org >> > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Virtualbox fails install
by James Knott 13 Dec '16

13 Dec '16

I downloaded the latest version of VirtualBox from the Oracle site. When I tried to install it, I get the error shown below. I ran sha256sum on the downloaded file and got the same sha256sum as on the web site. I then tried installing an older version that installed without problem in 13.1, but got the same error. Is there a problem with 42.2 causing this? Error: INVALID:VirtualBox-5.1-5.1.10_112026_openSUSE132-1.x86_64 (file-d7fca166): Signature verification failed [4-Signatures public key is not available] Header V4 DSA/SHA1 Signature, key ID 98ab5139: NOKEY Header SHA1 digest: OK (acc64e7f380ddec58b32e64dfa124bd4bcf06d94) MD5 digest: OK (5359b1e717a7c1fbef27432a117bb3b0) V4 DSA/SHA1 Signature, key ID 98ab5139: NOKEY -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] making windows consistent
by Dave Howorth 13 Dec '16

13 Dec '16

Some windows do not follow my window manager's conventions, with a traditional title bar and separate menu. They also don't respect my border widths. I think they are gnome applications, although there may be others. Is there any way to configure these applications to respect my choice of appearance and user interface style? Cheers, Dave Leap 42.1 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10