August 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Where to file the bug report
by John Andersen 29 Aug '13

29 Aug '13

I have a bug that is so odd, I have no idea who to blame, or where to file the bug report: Netshell: If I sleep my laptop (suspend to ram, not to disk) and awaken it some time later, dragging a window around is sluggish, the window will lag far behind the cursor. This will persist for as long as I care to wait. If I press Ctrl+P (the shortcut to toggel desktop effects off, wait just about 10 seconds (you can tell when the change has taken effect by watching the KDE taskbar), the press Ctrl+P again to turn the bling back on, everything is back to normal and the speed and responsiveness is virtually indistinguishable with effects on vs off. This happens ONLY after awakening from suspend to ram. ---The environment: OpenSuse 12.3 with the following upgrades: Xorg from: http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_12.3/ KDE4.11 from: http://download.opensuse.org/repositories/KDE:/Releas:/411/openSUSE_12.3/ Core 2 Duo machine with a ATI Radeon Mobility x1400 card supported by the community drivers. -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] forum nntp server down?
by Dave Howorth 29 Aug '13

29 Aug '13

I'm seeing 'connection refused' from nntp.opensuse.org, and 100% packet loss from ping. Does anybody know what the problem is? Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

Re: [opensuse] ddclient error
by Carlos E. R. 28 Aug '13

28 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Content-ID: <alpine.LNX.2.00.1308281308080.9215(a)minas-tirith.valinor> El 2013-08-28 a las 14:42 +0800, George Olson (SUSE list) escribió: > On 08/28/2013 07:43 AM, Carlos E. R. wrote: You forget to reply to the list. You are using thunderbird, so you should have a "reply to list" button. >> First, you configure the router to send the log to the computer. Many >> can do that, but some can not. If yours can't, then this can not be done. >> >> > Well, I appreciate the effort, but it looks like my router won't be able > to send the log regularly to the computer. My combination router/modem > that I received from my ISP has been scrubbed to the point where lots of > features were removed, I expect because the service company doesn't want > to add to their troubleshooting load when people mess with it that don't > know what they are doing. Well, my router came also from my ISP and had it. Years later I replaced it with a TP-Link which also has it. > It has a manual save button, but you have to log into the router and > click it with the mouse - there is no option to have it automatically > save on a pc on the network at certain times. No, it is not that function. In the logging details section, there is usually these settings: level of logging (normal, warning, debug, etc), and where to log. Default is local, ie, in router memory. Alternative is "remote", which means sending to port 514.udp of a machine in the network. If that machine is listening on that port, messages go to the syslog server daemon one by one as they are produced. This is important on any half serious installation because the router memory is volatile nad because of centralized logging. True, not all home routers have it. - -- Cheers Carlos E. R. (from 11.4, with Evergreen, x86_64 "Celadon" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlId3CwACgkQja8UbcUWM1y6vwD/QI+yhdoxz2+t0FUxBCWcvpQQ 9dpTaW9A2cKbh4twuhwA/R5VEvPRQC+qoxlsn9pVJIp19M+V1niE1msfNWS2lLj5 =F8Si -----END PGP SIGNATURE-----

1 0

[opensuse] Hard drive errors
by Dylan 28 Aug '13

28 Aug '13

Hi all, As part of upgrading, I'm testing my hard drives... On one I have the following in the report from smartctl: SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE [...] 5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 25 and ATA Error Count: 14 (device log contains only the most recent five errors) [...] Error 14 occurred at disk power-on lifetime: 11871 hours (494 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 01 00 00 00 Error: ICRC, ABRT at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 08 01 01 00 00 a0 ff 00:26:42.700 WRITE FPDMA QUEUED 61 08 10 37 94 50 40 ff 00:26:42.700 WRITE FPDMA QUEUED 61 08 58 17 4d 10 40 08 00:26:42.700 WRITE FPDMA QUEUED 61 10 50 e7 4c 10 40 08 00:26:42.700 WRITE FPDMA QUEUED 61 08 48 c7 4c 10 40 08 00:26:42.700 WRITE FPDMA QUEUED Do these mean the drive is going to fail completely very soon? Is there a way I can extend its life? These drives are going to be used in hobby machines for 'playing' with - ones which will have no important data on them and which will likely get regular re-installing. To some extent, learning to monitor the state of a dodgy drive would definitely fit with playing ... Cheers Dylan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

[opensuse] Passport USB drive now failing to mount reliably on openSuSE12.3x64 system.
by Marc Chamberlin 28 Aug '13

28 Aug '13

Hi - I am running openSuSE12.3x64 and am encountering a problem that is unique to this machine. I have a USB Western Digital Passport drive and when I connect it, the drive is no longer working properly. I mostly have PortableApps and jpg images on it. It often connects initially and I can use Dolphin to browse files and folders, but always as soon as I try to use Gwenview to view an image it immediately disconnects/unmounts the drive. It often disconnects/unmounts the drive immediately after it is mounted also, but not always. Gwenview does cause it to disconnect/unmount the drive every time I try to use it. I am not having troubles with other USB devices (mouse, keyboard) connected via USB to this system (even on the same USB port) and the Passport drive works fine on another openSuSE12.2 system as well as Windoz systems. The following shows output from messages during a typical attempt to use the drive. Any ideas? Marc... 2013-08-26T09:45:01.196791-07:00 bigbang /usr/sbin/cron[5568]: pam_unix(crond:session): session opened for user root by (uid=0) 2013-08-26T09:45:01.504282-07:00 bigbang /USR/SBIN/CRON[5568]: pam_unix(crond:session): session closed for user root 2013-08-26T09:45:11.099225-07:00 bigbang udisksd[3268]: Mounted /dev/sdd1 at /run/media/marc/My Passport on behalf of uid 1000 2013-08-26T09:45:14.016953-07:00 bigbang kernel: [ 266.821664] usb 1-6: USB disconnect, device number 10 2013-08-26T09:45:14.036841-07:00 bigbang kernel: [ 266.825657] sd 12:0:0:0: [sdd] Unhandled error code 2013-08-26T09:45:14.036860-07:00 bigbang kernel: [ 266.825665] sd 12:0:0:0: [sdd] 2013-08-26T09:45:14.036863-07:00 bigbang kernel: [ 266.825670] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK 2013-08-26T09:45:14.036865-07:00 bigbang kernel: [ 266.825674] sd 12:0:0:0: [sdd] CDB: 2013-08-26T09:45:14.036867-07:00 bigbang kernel: [ 266.825676] Read(10): 28 00 00 0a f2 95 00 00 01 00 2013-08-26T09:45:14.036869-07:00 bigbang kernel: [ 266.825690] end_request: I/O error, dev sdd, sector 717461 2013-08-26T09:45:14.036878-07:00 bigbang kernel: [ 266.825771] sd 12:0:0:0: [sdd] Unhandled error code 2013-08-26T09:45:14.036881-07:00 bigbang kernel: [ 266.825775] sd 12:0:0:0: [sdd] 2013-08-26T09:45:14.036883-07:00 bigbang kernel: [ 266.825777] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK 2013-08-26T09:45:14.036885-07:00 bigbang kernel: [ 266.825780] sd 12:0:0:0: [sdd] CDB: 2013-08-26T09:45:14.036887-07:00 bigbang kernel: [ 266.825782] Read(10): 28 00 00 0a f2 96 00 00 01 00 2013-08-26T09:45:14.036888-07:00 bigbang kernel: [ 266.825793] end_request: I/O error, dev sdd, sector 717462 2013-08-26T09:45:14.036890-07:00 bigbang kernel: [ 266.827875] FAT-fs (sdd1): Directory bread(block 717398) failed 2013-08-26T09:45:14.036896-07:00 bigbang kernel: [ 266.827902] FAT-fs (sdd1): Directory bread(block 717399) failed 2013-08-26T09:45:14.036898-07:00 bigbang kernel: [ 266.827922] FAT-fs (sdd1): Directory bread(block 717400) failed 2013-08-26T09:45:14.036900-07:00 bigbang kernel: [ 266.827942] FAT-fs (sdd1): Directory bread(block 717401) failed 2013-08-26T09:45:14.036902-07:00 bigbang kernel: [ 266.827961] FAT-fs (sdd1): Directory bread(block 717402) failed 2013-08-26T09:45:14.036916-07:00 bigbang kernel: [ 266.827981] FAT-fs (sdd1): Directory bread(block 717403) failed 2013-08-26T09:45:14.036919-07:00 bigbang kernel: [ 266.828030] FAT-fs (sdd1): Directory bread(block 717404) failed 2013-08-26T09:45:14.036921-07:00 bigbang kernel: [ 266.828051] FAT-fs (sdd1): Directory bread(block 717405) failed 2013-08-26T09:45:14.038072-07:00 bigbang kernel: [ 266.828071] FAT-fs (sdd1): Directory bread(block 717406) failed 2013-08-26T09:45:14.038080-07:00 bigbang kernel: [ 266.828146] FAT-fs (sdd1): Directory bread(block 717407) failed 2013-08-26T09:45:14.061956-07:00 bigbang kernel: [ 266.866210] FAT-fs (sdd1): FAT read failed (blocknr 105) 2013-08-26T09:45:14.061978-07:00 bigbang kernel: [ 266.866231] FAT-fs (sdd1): unable to read inode block for updating (i_pos 1908068) 2013-08-26T09:45:14.061981-07:00 bigbang kernel: [ 266.866262] FAT-fs (sdd1): unable to read inode block for updating (i_pos 1908070) 2013-08-26T09:45:14.061983-07:00 bigbang kernel: [ 266.866292] FAT-fs (sdd1): unable to read inode block for updating (i_pos 1908075) 2013-08-26T09:45:14.061985-07:00 bigbang kernel: [ 266.866407] FAT-fs (sdd1): unable to read inode block for updating (i_pos 1908083) 2013-08-26T09:45:14.061987-07:00 bigbang kernel: [ 266.866440] FAT-fs (sdd1): unable to read inode block for updating (i_pos 1908092) 2013-08-26T09:45:14.097962-07:00 bigbang udisksd[3268]: Cleaning up mount point /run/media/marc/My Passport (device 8:49 no longer exist) 2013-08-26T09:45:14.111952-07:00 bigbang kernel: [ 266.916171] FAT-fs (sdd1): bread failed in fat_clusters_flush 2013-08-26T09:45:19.595939-07:00 bigbang kernel: [ 272.400021] usb 1-6: new high-speed USB device number 11 using ehci_hcd 2013-08-26T09:45:19.711205-07:00 bigbang kernel: [ 272.515046] usb 1-6: New USB device found, idVendor=1058, idProduct=0704 2013-08-26T09:45:19.711226-07:00 bigbang kernel: [ 272.515054] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 2013-08-26T09:45:19.711229-07:00 bigbang kernel: [ 272.515058] usb 1-6: Product: External HDD 2013-08-26T09:45:19.711231-07:00 bigbang kernel: [ 272.515061] usb 1-6: Manufacturer: Western Digital 2013-08-26T09:45:19.711233-07:00 bigbang kernel: [ 272.515065] usb 1-6: SerialNumber: 5758453930384C5631373730 2013-08-26T09:45:19.711235-07:00 bigbang kernel: [ 272.515400] usb-storage 1-6:1.0: Quirks match for vid 1058 pid 0704: 8000 2013-08-26T09:45:19.712242-07:00 bigbang kernel: [ 272.516567] scsi13 : usb-storage 1-6:1.0 2013-08-26T09:45:19.715959-07:00 bigbang mtp-probe: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6" 2013-08-26T09:45:19.717948-07:00 bigbang mtp-probe: bus: 1, device: 11 was not an MTP device 2013-08-26T09:45:20.714365-07:00 bigbang kernel: [ 273.518724] scsi 13:0:0:0: Direct-Access WD 2500BEV External 1.05 PQ: 0 ANSI: 4 2013-08-26T09:45:20.714388-07:00 bigbang kernel: [ 273.519098] sd 13:0:0:0: Attached scsi generic sg4 type 0 2013-08-26T09:45:20.715176-07:00 bigbang kernel: [ 273.519722] sd 13:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) 2013-08-26T09:45:20.715955-07:00 bigbang kernel: [ 273.520598] sd 13:0:0:0: [sdd] Write Protect is off 2013-08-26T09:45:20.715975-07:00 bigbang kernel: [ 273.520606] sd 13:0:0:0: [sdd] Mode Sense: 21 00 00 00 2013-08-26T09:45:20.716953-07:00 bigbang kernel: [ 273.521479] sd 13:0:0:0: [sdd] No Caching mode page present 2013-08-26T09:45:20.716968-07:00 bigbang kernel: [ 273.521485] sd 13:0:0:0: [sdd] Assuming drive cache: write through 2013-08-26T09:45:20.720453-07:00 bigbang kernel: [ 273.524610] sd 13:0:0:0: [sdd] No Caching mode page present 2013-08-26T09:45:20.720475-07:00 bigbang kernel: [ 273.524617] sd 13:0:0:0: [sdd] Assuming drive cache: write through 2013-08-26T09:45:20.763124-07:00 bigbang kernel: [ 273.567509] sdd: sdd1 2013-08-26T09:45:20.766120-07:00 bigbang kernel: [ 273.570964] sd 13:0:0:0: [sdd] No Caching mode page present 2013-08-26T09:45:20.766137-07:00 bigbang kernel: [ 273.570971] sd 13:0:0:0: [sdd] Assuming drive cache: write through 2013-08-26T09:45:20.766140-07:00 bigbang kernel: [ 273.570977] sd 13:0:0:0: [sdd] Attached SCSI disk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 9

[opensuse] Hamachi on openSuSE 12.x - working!
by Christopher Myers 28 Aug '13

28 Aug '13

Hi everyone, A while back someone posted about needing help getting Hamachi to work on oS 12.x. I've spent a fair bit of time working on it the last two days, and finally got it working. Ultimately, I had to find a different version of the Hamachi client - the current version on the website simply wouldn't work, even on older versions of oS. It was really hard finding an old version of the client though (just found links mostly,) but I finally found one here: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&ved… Tested, and it seems to work fine on oS 12.2 x64 and oS 12.1 i586, and allows connections from the current version Windows 7 client as well. I'm assuming it'll work on 12.3 as well, as the errors I was getting on 12.3 were identical to the ones on 12.1 and 12.2, but I haven't tested it just yet. However, it's really old (version 2.0.1.13.) If anyone is able to find a newer version, please let me know so I can download test it too :) Chris -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] ddclient error
by George Olson (SUSE list) 27 Aug '13

27 Aug '13

I posted this in the forums, but the forums seem to be down now and I am hoping that someone may be able to help quickly before I head off to work today. I hope I am not breaking protocol by doing this, but here goes. I enabled ddclient, to update my ddns on freedns.afraid.org. I have to use ddclient or some other application on my pc and cannot use ddns on my router, because my router's built in ddns is pre-set to dynDNS.org or TZO, and it doesn't allow any other hosting. I was in a konsole later and it said I had new system mail, so I opened it up. Here is what the contents of one of them was (sanitized): [code] >From root(a)tribaltrekker.site Tue Aug 27 19:57:55 2013 Return-Path: <root(a)tribaltrekker.site> X-Original-To: root Delivered-To: root(a)tribaltrekker.site Received: by tribaltrekker.site (Postfix, from userid 0) id 668E665F85; Tue, 27 Aug 2013 19:57:55 +0800 (PHT) To: root(a)tribaltrekker.site Subject: status report from ddclient(a)tribaltrekker.site Message-Id: <20130827115755.668E665F85(a)tribaltrekker.site> Date: Tue, 27 Aug 2013 19:57:55 +0800 (PHT) From: root(a)tribaltrekker.site (root) WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = '' WARNING: SENT: https://freedns.afraid.org/dynamic/update.php?MmNWYUQ2eDhrTUU1cDdYOFd4Zkk6M… WARNING: REPLIED: HTTP/1.1 200 OK WARNING: Server: nginx WARNING: Date: Tue, 27 Aug 2013 11:58:10 GMT WARNING: Content-Type: text/plain WARNING: Content-Length: 47 WARNING: Connection: close WARNING: Vary: Accept-Encoding WARNING: WARNING: ERROR: Address xxx.xxx.xxx.61 has not changed. FAILED: updating xxxxxxxx.xxxxxxxx.com: Invalid reply. regards, ddclient(a)tribaltrekker.site (version 3.8.1) [/code] I have been getting this system mail every 5 minutes because I have the timer set in /etc/ddclient.conf to 5 minutes. However, when I did look at my my IP address on my router, which did change, my subdomain that I chose on freedns had also updated correctly. So it tells me it is not updating, but apparently it is? Or is it telling me something else? In any case, some googling pointed that this could be an error in a perl library for SSL. So just to check I tried setting the ssl=no parameter in /etc/ddclient.conf, but I am still getting the error. So I set it back to ssl=yes. So I don't know if this has anything to do with SSL. I checked, and the version of the perl library that I have is: [code] # rpm -qa | grep perl | grep SSL perl-IO-Socket-SSL-1.55-4.1.1.noarch [/code] The file that supposedly has the error is as follows: [code] /var/cache/ddclient # cat ddclient.cache ## ddclient-3.8.1 ## last updated at Tue Aug 27 20:23:06 2013 (1377606186) atime=1377606186,host=xxxxxxxx.xxxxxxxx.com,ip=,mtime=0,status=failed,warned-min-error-interval=0,warned-min-interval=0,wtime=0 xxxxxxxx.xxxxxxxx.com [/code] One other question - I saw that some people that had a similar error in the past said it caused their hosting service to block them because it was updating all the time. Isn't ddclient supposed to be checking all the time anyway? I have it set for every 5 minutes. Why would a hosting service like dynDNS or freedns.afraid.org block someone if their pc had some kind of internal error when it went to update the ip on their subdomain? What I am really wondering on that is if I should disable this service altogether when I am not using it, so as not to cause problems for the hosting company. I don't know enough about how this works to know the answers to that. Any help would be great! -- George Olson Box #1: 12.3 | KDE 4.10 | AMD Phenom IIX4 | 64 | ATI Radeon HD 3300 | 16GB Box #2: 12.2 | KDE 4.9.2 | AMD Athlon X3 | 64 | nVidia C61 GeForce 7025 | 4GB Laptop: 12.3 | KDE 4.10 | Core i7-2620M | 64 | Intel HD Graphics 3000 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] KMail on 12.3
by Carlos E. R. 27 Aug '13

27 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Content-ID: <alpine.LNX.2.00.1308271901050.9215(a)minas-tirith.valinor> El 2013-08-27 a las 10:00 -0400, Anton Aylward escribió: I assume you wanted to post to the list :-? I see nothing private on this post. > Carlos E. R. said the following on 08/27/2013 09:26 AM: >> El 2013-08-27 a las 10:23 +0200, Hans Witvliet escribió: >>> Or is this a wrong assumption? >> >> No, it is correct. > > For some definitions of 'efficient'. > Particularly those concerned with opening of files and creating of files, > particularity large number of files in the same directory and hence indirect > blocks with some file system models. It is the typical behaviour :-) > I seem to recall that while ReiserFS (and BtrFS) is good about stuffing small > files in various places it isn't so good at creating large numbers of files > rapidly, as might be the case when fetchmail/smtp wakes up and delivers many > messages to your INBOX. No, I have tested it creating/removing lots of small files, and it was fast. I have not tested btrfs. I may test this another day, when I get back home. - -- Saludos Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlIc23UACgkQja8UbcUWM1xQ9gD/UjN4OvY0QjFdfgiLZB//xlxc U3uxfvm/67NGj6skZGYA/1wf0E/GsCytnOa3crm9LUJJp2edjqjheq3qSiyDBA+/ =FHsx -----END PGP SIGNATURE-----

1 0

[opensuse] (OT) repair mysql from frm: Can't open table
by Daniel Bauer 27 Aug '13

27 Aug '13

Hello, Somehow my backup only backuped the frm files for some databases. So I try to recreate at least the table structures from the frm files. I enter mysql from commandline, and USE the appropriate database. I created empty MYD and MYI files for the table, gave them -rw-rw---- for user and group mysql. But when I type repair table adrs USE_FRM; I get "Can't open table". Unfortunately I cannot search google, because google doesn't respect my search entry, although I added +'Can't open table' I get thousands of results for "can't" that google loves, but not for "can't open table" that would help me ... SO please forgive that I ask this off-topic here... Can anybody help me? Thanks! Daniel -- Daniel Bauer photographer Basel Barcelona professional photography: http://www.daniel-bauer.com google+: https://plus.google.com/109534388657020287386 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] 12.3 DynDNS Software
by Paul Groves 27 Aug '13

27 Aug '13

Hi all, I am migrating my webserver from ubuntu to opensuse. On Ubuntu I used Inadyn which worked very well but had to be configured through the command line. It seems more sensible to do this with YaST if possible. Does anyone know of YaST-compatible DynDNS client for OpenSUSE that I can use for freedns.afraid.org and dyn.org? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 17