June 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] IPv6 in Firefox: does it work? The saga continues...
by Carlos E. R. 04 Jun '13

04 Jun '13

Long time ago, on Jan 2011 I asked this same question. http://lists.opensuse.org/opensuse/2011-01/msg00165.html > On Thu, 06 Jan 2011 18:14:52 +0100, I wrote: >> On 2011-01-06 09:20, Per Jessen wrote: >> Carlos E. R. wrote: >> >>> Firefox can't establish a connection to the server at >>> [ff02::1:ff08:4ccb]. >> >> >> Try this instead: >> >> http:///[FE80::21E:BFF:FE08:4CCB%eth0] >> >> That format works for me. > > > Indeed! That one works. Three or two bars, both work. > > But it is a terrible format! > > (thunderbird doesn't highlight it. It is not clickable) Here we go again. If in firefox I try to browse to “http:///[FE80::21E:BFF:FE08:4CCB%eth0]”, I get redirected to google. The address is correct, I can ping it: cer@rescate1:~> ping6 "FE80::21E:BFF:FE08:4CCB%eth0" PING FE80::21E:BFF:FE08:4CCB%eth0(fe80::21e:bff:fe08:4ccb) 56 data bytes 64 bytes from fe80::21e:bff:fe08:4ccb: icmp_seq=1 ttl=64 time=0.301 ms 64 bytes from fe80::21e:bff:fe08:4ccb: icmp_seq=2 ttl=64 time=0.136 ms 64 bytes from fe80::21e:bff:fe08:4ccb: icmp_seq=3 ttl=64 time=0.140 ms ^C --- FE80::21E:BFF:FE08:4CCB%eth0 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.136/0.192/0.301/0.077 ms cer@rescate1:~> I have tried several combinations, but firefox will accept none. And it's made worse because it insist on googling it instead of giving an error. Can I disable google on the address bar? I can search myself if I want it... Ok, I found how to disable search, set keyword.enabled to false. Then I get the proper error: “The URL is not valid and cannot be loaded.” Here, they talk about this, it appears to be a bug: “http://www.gossamer-threads.com/lists/gentoo/user/246633” Or that LL addresses should not be used, but I have no idea what I should use instead. -- Cheers / Saludos, Carlos E. R. (from oS 12.3 "Dartmouth" GM (rescate 1)) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 27

Re: [opensuse] UEFI and W7 recovery?
by j.e.perry＠cox.net 04 Jun '13

04 Jun '13

---- "Carlos E. R." <robin.listas(a)telefonica.net> wrote: > On 2013-06-04 04:43, j.e.perry(a)cox.net wrote: > > > > I backed up my W7 system, but I don't want to lose the vendor-supplied recovery partition > > (there is, of course, no recovery dvd). > > I'm almost sure you can clone it from Windows. Maybe there is a program supplied by the manufacturer > that creates it. If not, you can use ghost like tools to clone it externally. > I don't know of one. And another customer asked Samsung this question after he'd wiped it without thinking to back up the recovery partition, and the reply was "send it in for repair". I know I can do it with dd, but I have to get a dd running first, which means installing 12.3, which means possibly (probably?) wiping the partition. I have no compelling reason to believe the recovery partition is corrupt, but I've tried several times to repair the W7 partition (200G out of 1TB), and Windows always says it's succeeded, and appears to work fine, but if I fire up Windows maintenance again, it repeats the error message, and takes another 15 -- 20 minutes to repair it again. Repeat ... Repeat ... > > When I boot into 12.3 install, I get the message, > > "You have to delete all existing partitions to get a valid uefi boot partition", or text > > to that effect. There are no other options offered (the present partition setup is corrupt > > due to the disastrous 12.2 attempt), and I see no way to avoid wiping the recovery partition. > > If the layout is corrupt due to previous attempts, simply run the manufacturer recovery procedure on > that partition. Let it reinstall Windows, then try again with openSUSE. > Tried that; that's how I got a running system back after the VB/12.2 disaster. It's a 64-bit Home Premium system, Andrey. I've been thinking about buying a W7Pro package (several Windows-only programs needed), but the "send for repair" demand from Samsung worries me. And, of, course, the cost of W7Pro. jp -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] KDE4 4.10 problems
by Anton Aylward 04 Jun '13

04 Jun '13

There seems an inconsistency. I mentioned this earlier but lets have a thread specific to it I have # zypper lr | grep kde ....... edited for readability 9 | kde-extra http://download.opensuse.org/repositories/KDE:/Extra/KDE_Release_410_openSU… 10 | kde410 http://download.opensuse.org/repositories/KDE:/Release:/410/openSUSE_12.2/ But # zypper dup --from kde410 --from kde-extra Loading repository data... Reading installed packages... Computing distribution upgrade... 8 Problems: Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by plasmoid-veromix-0.18.3-5.20.noarch Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by plasmoid-activitymanager-wheeled-0.6.1-1.12.i586 Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by libhomerun0-1.0.0-1.3.i586 Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by kwave-0.8.10-2.6.i586 Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by komparator4-1.0-1.3.i586 Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by basket-1.90-1.10.i586 Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by homerun-1.0.0-1.3.i586 Problem: k3b-codecs-2.0.2-15.126.i586 requires k3b = 2.0.2-15.126, but this requirement cannot be provided Problem: nothing provides kdebase4-runtime >= 4.10.4 needed by plasmoid-veromix-0.18.3-5.20.noarch Solution 1: deinstallation of plasmoid-veromix-0.18.3-5.18.noarch Solution 2: keep obsolete plasmoid-veromix-0.18.3-5.18.noarch Solution 3: break plasmoid-veromix-0.18.3-5.20.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): And that goes on and on and on Why is there stuff in kde10 asking for kde4.10.4 if 4.10.4 isn't in there? -- How long did the whining go on when KDE2 went on KDE3? The only universal constant is change. If a species can not adapt it goes extinct. That's the law of the universe, adapt or die. -- Billie Walsh, May 18 2013 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] A collection of 40 pre-built server images!
by Greg Freemyer 03 Jun '13

03 Jun '13

All, I just saw the susestudio blog post for last month: http://blog.susestudio.com/2013_05_01_archive.html They interviewed the person who built about 40 pre-built opensuse releases for different kinds of servers: http://www.jopux.org/joomla/ I haven't tried them, but it looks pretty cool. fyi: I think they are all built on 64-bit openSUSE with Gnome, but that seems like a reasonable start for a server. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] LibreOffice:/Unstable/openSUSE_12.1/ has flown the coop?
by Roger Oberholtzer 03 Jun '13

03 Jun '13

Anyone else missing http://download.opensuse.org/repositories/LibreOffice:/Unstable/openSUSE_12… for the past couple of days? -- Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] named reverse zone
by lynn 03 Jun '13

03 Jun '13

12.3 bind with the BIND9_DLZ plugin Quick question, if there are any bind gurus around. What reverse zone should I add for a 192.168.x.y address? I've added: 168.192.in-addr.arpa to hold the PTR's but nada. . . Saludos, L x Just in case, here are the details: I'm trying to setup DLZ on a Samba4 DC. Our Linux clients send nsupdate -g's to the DC. The forward zone updates are fine: nslookup catral Server: 192.168.1.16 Address: 192.168.1.16#53 Name: catral.hh3.site Address: 192.168.1.22 nslookup 192.168.1.22 Server: 192.168.1.16 Address: 192.168.1.16#53 ** server can't find 22.1.168.192.in-addr.arpa.: NXDOMAIN These are the dynamic zones in named: samba-tool dns zonelist hh16 3 zone(s) found pszZoneName : 168.192.in-addr.arpa Flags : DNS_RPC_ZONE_DSINTEGRATED DNS_RPC_ZONE_UPDATE_SECURE ZoneType : DNS_ZONE_TYPE_PRIMARY Version : 50 dwDpFlags : DNS_DP_AUTOCREATED DNS_DP_DOMAIN_DEFAULT DNS_DP_ENLISTED pszDpFqdn : DomainDnsZones.hh3.site pszZoneName : hh3.site Flags : DNS_RPC_ZONE_DSINTEGRATED DNS_RPC_ZONE_UPDATE_SECURE ZoneType : DNS_ZONE_TYPE_PRIMARY Version : 50 dwDpFlags : DNS_DP_AUTOCREATED DNS_DP_DOMAIN_DEFAULT DNS_DP_ENLISTED pszDpFqdn : DomainDnsZones.hh3.site pszZoneName : _msdcs.hh3.site Flags : DNS_RPC_ZONE_DSINTEGRATED DNS_RPC_ZONE_UPDATE_SECURE ZoneType : DNS_ZONE_TYPE_PRIMARY Version : 50 dwDpFlags : DNS_DP_AUTOCREATED DNS_DP_FOREST_DEFAULT DNS_DP_ENLISTED pszDpFqdn : ForestDnsZones.hh3.site -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] Overloaded wireless?
by Greg Freemyer 03 Jun '13

03 Jun '13

All, At my parents house they have a old wireless router (maybe 7 or 8 years old). It normally works fine, but this weekend we had an extra 10 adults at their house and the wireless kept dropping from all the connected devices every minute or two. Then, this morning after everyone left, the wireless was stable again. The only thing I can think of is that there may be some kind of device limit on the router and when we exceeded the limit, it would kick off one connection in order to grant the next one and we ended up with a big game of king of the hill. Does that sound reasonable? To keep this on topic, one of the devices going on and off line was my opensuse 12.3 laptop. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] renaming a network dev w/udevadm from command line?
by Linda Walsh 03 Jun '13

03 Jun '13

How does one rename an ethernet interface from the command line using udevadm? I've looked at the man page on that, and it's about as clear as lead paint. On reboot the other day, my persistent netdev rules didn't run for some reason, likely some new 'gotcha' in disabling old boot procedures. Rather than doing what I did which was to make the modules in question dynamically loadable, and bring up the system by hand and load the modules in the order I wanted them loaded, I' figured it would be easier to ask on here how one does this? If they are already installed, do I need to do a udevadm control? Or do I need a udevadm action to emulate what is going on in the 70-persistent-net.rules? These all look like 'add', so aren't there old names that need to be moved out of the way? or does adding these at "new name" automatically deleted them at "old name"? Thanks... SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:26:b9:2c:a4:f1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x8086:0x105e (e1000e) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:bf:be:b2", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x8086:0x105e (e1000e) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:bf:be:b3", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x14e4:0x1639 (bnx2) (custom name provided by external tool) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:26:b9:2c:a4:ef", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"; # PCI device 0x8086:0x1528 (ixgbe) (custom name provided by external tool) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="a0:36:9f:15:c9:c0", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth_s2_0" # PCI device 0x8086:0x1528 (ixgbe) (custom name provided by external tool) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="a0:36:9f:15:c9:c2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth_s2_1" ~ ~ ~ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] Firefox and HP ILO card - any way of overriding this
by Per Jessen 03 Jun '13

03 Jun '13

When trying to connect to an HP ILO card, I get this error: -------------------- Secure Connection Failed An error occurred during a connection to adenauer.ilo. You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate containing a unique serial number. (Error code: sec_error_reused_issuer_and_serial) The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. ---------------------- Normally I should have a way of saying "Ignore this, I know what I'm doing", but Firefox isn't showing any such option. I have cleared out a lot of old certificate exceptions for ILO cards, didn't change anything. With Opera, I have no problems. It complains about the certificate, which I tell it to ignore, and that's it. -- Per Jessen, Zürich (11.2°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Fwd: remote logins have strange keyboard setting... mostly latin, but not sure what? after fact update
by Linda Walsh 03 Jun '13

03 Jun '13

Sending this here too, in case anyone has a clue about odd keyboard issues... I upgraded and rebooted my server this yesterday and have some oddness when I login to it remotely now -- at least until I type "reset". The most noticeable feature is some keys on my keyboard are remapped to some foreign keys...but NOT that many. Specifically, on the left, tilda and at sign ~@ => ß§ On the left side it's the brack/brace /backslash and vertical bar -> []\ => ÄÜÖ {}| => äüö ---- My keyboard/terminal is still set to a 'linux' terminal, and locale settings look like: LANG=en_US.UTF-8 LC_CTYPE=en_US.UTF-8 LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE=C LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= ---- If I type "reset", the terminal goes back to "normal". If I start an X11 app like gvim from the terminal BEFORE I reset it, the X11 app catches the weird characters as well. But if I type 'reset' (ncurses-utils-5.9 in /usr/bin/), it resets the term and then if I launch an X util, it's "normal". Anyone have an idea about what might be going on? Nothing in the environment before/after seems strange (this is how a pre-reset v. post reset looks from diff: GPG_TTY=/dev/ttyp2 ö GPG_TTY=/dev/ttyp1 HISTFILE=/home/law/.histIshtar_ttyp2 ö HISTFILE=/home/law/.histIshtar_ttyp1 PIPESTATUS=(Ä0Ü="0" Ä1Ü="0") ö PIPESTATUS=(Ä0Ü="0" Ä1Ü="0" Ä2Ü="0") PPID=79754 ö PPID=78347 SSH_AUTH_SOCK=/tmp/ssh-2FyrkLSyYB/age ö SSH_AUTH_SOCK=/tmp/ssh-lwihqyNyKw/age SSH_CLIENT='192.168.4.12 49606 22' ö SSH_CLIENT='192.168.4.12 49605 22' SSH_CONNECTION='192.168.4.12 49606 19 ö SSH_CONNECTION='192.168.4.12 49605 19 SSH_TTY=/dev/ttyp2 ö SSH_TTY=/dev/ttyp1 TTY=/dev/ttyp2 ö TTY=/dev/ttyp1 TTY_NAME=ttyp2 ö TTY_NAME=ttyp1 tty=/dev/ttyp2 ö tty=/dev/ttyp1 Even though the chars are displaying 'funny', they still seem to have their normal meaning and function. If I use a windows dumb term to ssh in, I don't see the problem, but it doesn't know how to switch charsets or do whatever "securecrt" or xterm is doing... I tried it from a different computer... same thing. it's definitely an update on the server that is causing this... its very weird. but fortunately not that difficult to get around... Any ideas? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1