April 2013 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] 12.3 power off issue with multicore?
by Cristian Rodríguez 19 Apr '13

19 Apr '13

On 04/18/2013 02:43 AM, Toshi Esumi wrote: > On Thu, 2013-04-18 at 01:15 -0300, Cristian Rodríguez wrote: > >> Ok, what happends when you issue "poweroff" in the command line as root >> ? does the system turns off ? >> > "poweroff" ends up with the same result. Restarted. > > Toshi > Ok, - has the motherboard manufacturer released any BIOS updates that you have not installed ? - try kernel_head : zypper ar -f -r http://download.opensuse.org/repositories/Kernel:/HEAD/standard/Kernel:HEAD… zypper dup --from Kernel_HEAD - if nothing of that helps, fill a bug report against the kernel. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] Allowing multiple protocols in SuSEfirewall2
by James Knott 18 Apr '13

18 Apr '13

I am trying to configure the firewall in 12.3 to allow more than one IPv6 protocol. If I use the example (with the correct address) listed in the file SuSEfirewall2: fd76:9dbb:91a3:1::/64,fd76:9dbb:91a3:4::/64,tcp,ssh" # allow ssh from one IPv6 network to another This works well and the port scan shows port 22 open as expected. However, I'd like to also be able to pass imaps on port 993. Is there any way I can get this to work with more than one protocol. If I add tcp, imaps or just imaps to the line, the IPv6 rule won't load. It also doesn't work if I create separate lines for both ssh and imaps. BTW, I'm using this as part of a FW_FORWARD statement, as this allows access to my network. Any ideas? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Broken perl?
by Bob Williams 18 Apr '13

18 Apr '13

Hi, For years I have run a weekly perl script that checks the integrity of some files (md5checksum comparisons), and then mails me a reassuring message. Today I got the following error message: *** Error in `/usr/bin/perl': double free or corruption (!prev): 0x000000000209fdd0 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7abf6)[0x7f35724efbf6] /lib64/libc.so.6(+0x7b973)[0x7f35724f0973] /usr/bin/perl(Perl_av_extend+0x1ed)[0x49ce5d] /usr/bin/perl(Perl_stack_grow+0x22)[0x4d2d72] /usr/bin/perl(Perl_pp_gv+0x24)[0x49f654] /usr/bin/perl(Perl_runops_standard+0x16)[0x49ee16] /usr/bin/perl(perl_run+0x402)[0x43cbb2] /usr/bin/perl(main+0x11b)[0x41ec5b] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f3572496a15] /usr/bin/perl[0x41ec95] ======= Memory map: ======== 00400000-00571000 r-xp 00000000 08:07 10853 /usr/bin/perl 00770000-00771000 r--p 00170000 08:07 10853 /usr/bin/perl 00771000-00776000 rw-p 00171000 08:07 10853 /usr/bin/perl 017cf000-0245d000 rw-p 00000000 00:00 0 [heap] 7f3572058000-7f357206d000 r-xp 00000000 08:07 785018 /lib64/libgcc_s.so.1 7f357206d000-7f357226c000 ---p 00015000 08:07 785018 /lib64/libgcc_s.so.1 7f357226c000-7f357226d000 r--p 00014000 08:07 785018 /lib64/libgcc_s.so.1 7f357226d000-7f357226e000 rw-p 00015000 08:07 785018 /lib64/libgcc_s.so.1 7f357226e000-7f3572274000 r-xp 00000000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572274000-7f3572473000 ---p 00006000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572473000-7f3572474000 r--p 00005000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572474000-7f3572475000 rw-p 00006000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572475000-7f3572618000 r-xp 00000000 08:07 784908 /lib64/libc-2.17.so 7f3572618000-7f3572818000 ---p 001a3000 08:07 784908 /lib64/libc-2.17.so 7f3572818000-7f357281c000 r--p 001a3000 08:07 784908 /lib64/libc-2.17.so 7f357281c000-7f357281e000 rw-p 001a7000 08:07 784908 /lib64/libc-2.17.so 7f357281e000-7f3572822000 rw-p 00000000 00:00 0 7f3572822000-7f3572839000 r-xp 00000000 08:07 784934 /lib64/libpthread-2.17.so 7f3572839000-7f3572a38000 ---p 00017000 08:07 784934 /lib64/libpthread-2.17.so 7f3572a38000-7f3572a39000 r--p 00016000 08:07 784934 /lib64/libpthread-2.17.so 7f3572a39000-7f3572a3a000 rw-p 00017000 08:07 784934 /lib64/libpthread-2.17.so 7f3572a3a000-7f3572a3e000 rw-p 00000000 00:00 0 7f3572a3e000-7f3572a4a000 r-xp 00000000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572a4a000-7f3572c4a000 ---p 0000c000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572c4a000-7f3572c4b000 r--p 0000c000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572c4b000-7f3572c4c000 rw-p 0000d000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572c4c000-7f3572c7a000 rw-p 00000000 00:00 0 7f3572c7a000-7f3572c7d000 r-xp 00000000 08:07 784914 /lib64/libdl-2.17.so 7f3572c7d000-7f3572e7c000 ---p 00003000 08:07 784914 /lib64/libdl-2.17.so 7f3572e7c000-7f3572e7d000 r--p 00002000 08:07 784914 /lib64/libdl-2.17.so 7f3572e7d000-7f3572e7e000 rw-p 00003000 08:07 784914 /lib64/libdl-2.17.so 7f3572e7e000-7f3572f7b000 r-xp 00000000 08:07 784916 /lib64/libm-2.17.so 7f3572f7b000-7f357317a000 ---p 000fd000 08:07 784916 /lib64/libm-2.17.so 7f357317a000-7f357317b000 r--p 000fc000 08:07 784916 /lib64/libm-2.17.so 7f357317b000-7f357317c000 rw-p 000fd000 08:07 784916 /lib64/libm-2.17.so 7f357317c000-7f357319d000 r-xp 00000000 08:07 784901 /lib64/ld-2.17.so 7f3573379000-7f357337d000 rw-p 00000000 00:00 0 7f357339b000-7f357339d000 rw-p 00000000 00:00 0 7f357339d000-7f357339e000 r--p 00021000 08:07 784901 /lib64/ld-2.17.so 7f357339e000-7f357339f000 rw-p 00022000 08:07 784901 /lib64/ld-2.17.so 7f357339f000-7f35733a0000 rw-p 00000000 00:00 0 7ffff3607000-7ffff3628000 rw-p 00000000 00:00 0 [stack] 7ffff371c000-7ffff371d000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] The script hasn't changed, so it must be due to a recent 'upgrade' to perl. /lib64/libc.so.6 is a symlink to libc-2.17.so which is also in /lib64/ Where should I start trying to solve this problem? Bob -- Bob Williams System: Linux 3.7.10-1.1-desktop Distro: openSUSE 12.3 (x86_64) with KDE Development Platform: 4.10.1 "release 545" Uptime: 06:00am up 1 day 16:20, 3 users, load average: 0.24, 0.14, 0.14 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] LXDE does not restart after logout
by Hearns, John 18 Apr '13

18 Apr '13

I am having a problem with the LXDM display manager on OpenSUSE 12.1 I did post on the Opensuse forum, but no answers yet. Any help gratefully received! I can start it fine, log in and start a session etc. But when I use lxsession-logout and logout the display manager does not restart. I get the following in the system log: Apr 16 18:21:43 host23 systemd-logind[751]: Removed session 1000. Apr 16 18:21:43 host23 polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.3149, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8) (disconnected from bus) Apr 16 18:21:43 host23 dbus-daemon[906]: **** /proc/self/mountinfo changed Apr 16 18:21:43 host23 console-kit-daemon[22221]: rmdir: failed to remove â/var/run/dbus/at_console/hearnsjâ: Directory not empty Apr 16 18:21:47 host23 killproc: killproc: Usage: Apr 16 18:21:47 host23 xdm[22532]: ..done lxdm.log has: ** Message: find greeter (nil) ** Message: find idle 0x1180cb0 ** Message: add 0x1180cb0 ** Message: prepare greeter on :0 ** Message: start greeter on :0 Any ideas? Is the polkitd error significant? Dr John Hearns | McLaren Racing Limited The contents of this email are confidential and for the exclusive use of the intended recipient. If you receive this email in error you should not copy it, retransmit it, use it or disclose its contents but should return it to the sender immediately and delete your copy. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Audio is "crackling" on only some Flash streams played in Chromium?
by C 18 Apr '13

18 Apr '13

I've been poking around trying to resolve an audio issue specific to Chromium on openSUSE. The symptoms... Audio is "crackling" (actually is sounds like an old 8-bit helicopter game) on only some Flash streams. An example of a Flash stream that is showing this behaviour: http://www.desura.com/games/snorms The flash streams on other sites such as YouTube (and others) works fine... this issue only shows up in some places. The same website on Firefox works fine - so I assume it's not a general Flash on openSUSE issue. I do not have Pepper installed in Chromium. Flash version is 11.2.202.275 Chromium is 27.0.1425.0 (185065) I've dug up this bug report: https://code.google.com/p/chromium/issues/detail?id=224046 but no help. Anyone else having this issue? Ideas? C. -- openSUSE 12.3 x86_64, KDE 4.10 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] NetworkManager dialog box doesn't show WPA
by SCOTT 18 Apr '13

18 Apr '13

OpenSUSE 12.3, NetworkManager dialog box (using nm-applet or nm-connection-editor) The dialog box is only showing WEP or none, not WPA2. Why? Fresh install. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] 12.3 power off issue with multicore?
by Toshi Esumi 18 Apr '13

18 Apr '13

I've read some threads in the past about symptoms similar to my long experience of the power off problem (doesn't power off but restarts). One of them said it's a problem with multicore CPU (mine is Athlonx2 64). Is it still an active problem w/ 12.3? Mine still does even after I re-built my machine with 12.3. Or is there a work around and I just don't know about it? Thanks, Toshi -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 12

[opensuse] How to import users and group ids?
by Marc Chamberlin 17 Apr '13

17 Apr '13

In my effort to upgrade our servers to openSuSE12.3, I have yet again encountered a problem that required a lot of time to debug and track down. This has plagued me and frosted my tootsies before... I often copy data (whole directory trees) that is required for various servers from an older OS into the realm of the new OS that I am upgrading to. For example, the MySQL databases, the Apache and Tomcat web site data, James mail data, etc. In the process user and group ID's from the old version of files can "change" because the underlying integer value - UID/GID - for these IDs is different for the two different OS versions. This in turn can lead to hard to debug security problems. It seems to me that when installing a new version of openSuSE, there ought to be a way to import the /etc/passwd and /etc/group files from an older OS into the new OS BEFORE anything gets actually installed. In that way, the underlying integer UID/GID could be kept consistent and not lead to problems that can/will result if/when a particular user/group identifier changes in value. If there is a way to do this, I was unable to find it in the documentation or via Google, so pointers will be much appreciated. Or perhaps, is there a tool that can merge and update a system, and all its files, from one set of /etc/passwd and /etc/group files into another set? Again, I am not able to find a tool that does it.... I know that I can use YaST to change the UID/GID for each user or group ID individually, and it seems to work OK, but gets tedious. Hoping there a better way? Marc... -- "The Truth is out there" - Spooky -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] imapd on openSUSE 12.3
by Roger Oberholtzer 17 Apr '13

17 Apr '13

I would like to enable courier IMAPD on an openSUSE 12.3 system. So I thought I would do so via yast. In the xinetd section, when I try to enable imap (/usr/sbin/imapd), yast wants to install a package called 'imap'. However, it seems this package is not available. I did a search for 'imap' on the openSUSE site and the package claims to be available. But alas the actual installable seems not to be available. Is it just a repository issue? When I look at this: https://build.opensuse.org/package/show?project=openSUSE% 3A12.3&package=imap it seems the standard builds are disabled. That must make it rather difficult for yast to install it... Another question is why it insists on adding a package called imap when /usr/sbin/imapd is already installed via courier-imap-4.12.0-2.1.1.i586. Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 17

[opensuse] zypper error message
by Phil Dobbin 17 Apr '13

17 Apr '13

Hi, all. I've recently install 64-bit OpenSuSE 12.3. It's my first experience of SuSE & I'm enjoying it. I recently added the packman repo in order to get the restricted codecs for Chromium & since doing so I see this error message every time I run 'zypper up': 'The following package updates will NOT be installed: gstreamer gstreamer-0_10 gstreamer-0_10-plugin-gnomevfs gstreamer-0_10-plugins-bad-lang gstreamer-0_10-plugins-base gstreamer-0_10-plugins-good gstreamer-0_10-utils gstreamer-0_10-utils-unversioned gstreamer-plugins-base gstreamer-plugins-good libcdio14 libgstapp-0_10-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstfft-1_0-0 libgstinterfaces-0_10-0 libgstpbutils-1_0-0 libgstreamer-0_10-0 libgstreamer-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgstvideo-1_0-0 libiso9660-8 libmjpegutils-2_0-0 libquicktime0 libquvi-scripts libxine2-pulse python-gstreamer-0_10 typelib-1_0-Gst-0_10 typelib-1_0-Gst-1_0 typelib-1_0-GstAudio-1_0 typelib-1_0-GstInterfaces-0_10 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0' I'm figuring there's a conflict somewhere hence the packages can't be installed. Is there anyway to clean up this situation? Any help appreciated. Cheers, Phil... -- currently (ab)using CentOS 5.9 & 6.4, Debian Squeeze & Wheezy, Fedora Beefy & Spherical, Lubuntu 12.10, OpenSuSE 12.3, OS X Snow Leopard & Ubuntu Precise & Quantal GnuPG Key : http://www.horse-latitudes.co.uk/publickey.asc -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6