November 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] dynamic ip address help wanted
by doiggl＠velocitynet.com.au 02 Nov '13

02 Nov '13

Hello, Question: How can I allow 2 laptops to share information between each other. The laptops are running opensuse 12.3 64 bit. They are both connected ta a adsl router/modem and the DHCP Server Status settings are listed at [1] - How can I allow setup the 2 laptops to get a dynamic DHCP ip address from router/modem Is there any existing documentation on this subject ? Thanks Glenn [1] DHCP Server Status Allow Bootp true Allow Unknown Clients true Enable true Subnet Definitions Subnet Value 192.168.1.0 Subnet Mask 255.255.255.0 Maximum Lease Time 86400 seconds Default Lease Time 43200 seconds Use local host address as DNS server true Use local host address as default gateway true Get subnet from IP interface iplan IP Range 192.168.1.1- 192.168.1.20 Option domain-name-servers= 0.0.0.0 other settings # /sbin/dhcpcd -d eth0 info, eth0: dhcpcd 3.2.3 starting info, eth0: hardware address = 20:cf:30:28:fd:a2 info, eth0: broadcasting for a lease debug, eth0: sending DHCP_DISCOVER with xid 0x5e04523d debug, eth0: waiting for 20 seconds debug, eth0: sending DHCP_DISCOVER with xid 0x5e04523d debug, eth0: sending DHCP_DISCOVER with xid 0x5e04523d debug, eth0: got a packet with xid 0x5e04523d info, eth0: offered 192.168.1.1 from 192.168.1.254 debug, eth0: sending DHCP_REQUEST with xid 0x5e04523d debug, eth0: waiting for 11 seconds debug, eth0: got a packet with xid 0x5e04523d info, eth0: checking 192.168.1.1 is available on attached networks debug, eth0: sending ARP probe #1 debug, eth0: sending ARP probe #2 debug, eth0: sending ARP probe #3 debug, eth0: sending ARP claim #1 debug, eth0: sending ARP claim #2 info, eth0: leased 192.168.1.1 for 43200 seconds debug, eth0: renew in 21600 seconds debug, eth0: rebind in 37800 seconds info, eth0: adding IP address 192.168.1.1/24 info, eth0: adding default route via 192.168.1.254 metric 0 info, eth0: adding route to 169.254.0.0/16 metric 0 debug, eth0: writing /etc/resolv.conf debug, eth0: writing /var/lib/dhcpcd/dhcpcd-eth0.info debug, eth0: forking to background info, eth0: exiting -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] starting lvm at boot-up ?
by Per Jessen 01 Nov '13

01 Nov '13

I have a newly installed 12.3 system. Yesterday I attached a disk-array to it, with a number of existing logical volumes. On boot-up, they weren't activated, apparently due to /etc/init.d/boot/lvm not being called. I ran 'insserv boot.lvm' which solved the problem, but I am wondering how that would/should normally be done? Also a little odd - I have a slightly older system which also uses LVM. Here I have presumably enabled boot.lvm a while ago, but: # find /etc/init.d -iname \*lvm\* /etc/init.d/boot.d/K05boot.lvm /etc/init.d/boot.d/S09boot.lvm /etc/init.d/boot.lvm On my new system: # find /etc/init.d -iname \*lvm\* /etc/init.d/boot.d/K50boot.lvm /etc/init.d/boot.d/S50boot.lvm /etc/init.d/boot.lvm In fact, everything in boot.d has priority 50 - why is that?? -- Per Jessen, Zürich (7.4°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 30

[opensuse] proliant support pack and systemd
by Per Jessen 01 Nov '13

01 Nov '13

Is anyone running 12.3+systemd on HP proliant? I've installed the PSP, but I can't start the SNMP agents. I get weird messages: 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: Starting Health agent (cmahealthd): ..done 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: redirecting to systemctl start 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: Starting Standard Equipment agent (cmastdeqd): ..done 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: redirecting to systemctl start 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: Starting Host agent (cmahostd): ..done 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: redirecting to systemctl start 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: Starting Threshold agent (cmathreshd): ..done 2013-10-31T17:26:45+01:00 rainbow hp-snmp-agents[13542]: redirecting to systemctl start Going through the scripts, it looks like "redirecting to systemctl start" is caused by: systemctl start hp-snmp-agents this calls /opt/hp/hp-snmp-agents/server/etc/cmad : case "$1" in start) $STARTADDON RETVAL=$? if [ $RETVAL -eq 0 ]; then touch $AGNTFILEPATH/$PNAME.pid pidlist=`$PIDOF -o $$ $PNAME` if [ -z "$pidlist" ]; then cmaechon "Starting $NAME ($PNAME): " $PNAME $PFLAGS < /dev/null > /dev/null 2>&1 & ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Why is systemd intercepting this? -- Per Jessen, Zürich (7.2°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] Follow-up on earlier swap issue
by Roger Oberholtzer 01 Nov '13

01 Nov '13

Back in the spring I reported a problem where an application would periodically not get to run when it was generating lots of data headed to an XFS file system. The good folk on this list helped me implement a work around that saved the day. (Gotta love this list!) I saw a reference in the oS 13.1 release info to a kernel improvement that sounds like it is addressing my very problem. http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7… I hope I get a chance to test this to see if it effects my problem. I just posted this FYI. -- Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] "Find my mouse pointer" feature
by Christopher Myers 01 Nov '13

01 Nov '13

Random question for everyone - On my old laptop at work, oS 11.4 had a "find my mouse pointer" feature where you could shake your mouse, and it would draw concentric circles around the pointer. Alas, I can't seem to find that feature in 12.3 on KDE :/ There is an option you can enable where you hit a key combination to do something similar, but it's not nearly as handy since you have to move your hands from where they are to hit that key combo. Finding your mouse pointer may not seem like a big deal, but I've got three 1920x1080 displays set up, one of them vertically, so sometimes the mouse can get lost for a little bit :P Anyone know how to get the old "shaker" feature back? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 14