openSUSE Users April 2011

users@lists.opensuse.org

150 participants
187 discussions

[opensuse] lirc/streamzap remote with openSUSE 11.4
by Khanh Tran 28 Apr '11

28 Apr '11

I just attempted an upgrade from 11.3 to 11.4 and everything works fine except for lirc, and specifically the streamzap driver. I'm running 2.6.37.1-1.2-desktop and I keep getting kernel messages like the following. Any ideas are appreciated! Thanks. [ 207.754065] usb 3-2: new low speed USB device using ohci_hcd and address 19 [ 207.944785] usb 3-2: New USB device found, idVendor=0e9c, idProduct=0000 [ 207.944794] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 207.944801] usb 3-2: Product: Streamzap Remote Control [ 207.944806] usb 3-2: Manufacturer: Streamzap, Inc. [ 207.957789] Registered IR keymap rc-streamzap [ 207.958324] rc rc0: lirc_dev: driver ir-lirc-codec (streamzap) registered at minor = 0 [ 207.958474] input: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/rc/rc0/input273 [ 207.958592] rc0: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/rc/rc0 [ 207.958614] streamzap 3-2:1.0: Registered Streamzap, Inc. Streamzap Remote Control on usb3:19 [ 207.982596] usb 3-2: USB disconnect, address 19 [ 207.982759] streamzap 3-2:1.0: urb terminated, status: -108 [ 208.511060] usb 3-2: new low speed USB device using ohci_hcd and address 20 [ 208.701803] usb 3-2: New USB device found, idVendor=0e9c, idProduct=0000 [ 208.701813] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 208.701819] usb 3-2: Product: Streamzap Remote Control [ 208.701824] usb 3-2: Manufacturer: Streamzap, Inc. [ 208.714806] Registered IR keymap rc-streamzap [ 208.715290] rc rc0: lirc_dev: driver ir-lirc-codec (streamzap) registered at minor = 0 [ 208.715437] input: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/rc/rc0/input274 [ 208.715555] rc0: Streamzap PC Remote Infrared Receiver (0e9c:0000) as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/rc/rc0 [ 208.715578] streamzap 3-2:1.0: Registered Streamzap, Inc. Streamzap Remote Control on usb3:20 [ 208.739839] usb 3-2: USB disconnect, address 20 [ 208.740784] streamzap 3-2:1.0: urb terminated, status: -108 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] anyone else seeing this postfix/sendmail "without set-uid root" error message?
by Carl Hartung 27 Apr '11

27 Apr '11

Hi All, error message: postfix/sendmail[12129]: warning: the Postfix sendmail command \ must be installed without set-uid root file permissions system: oS 11.4 x86_64 GNOME rpm shows 'postfix-2.7.2-13.14.1' installed via update 'Thu 21 Apr 2011 10:29:35 PM EDT' Thx! Carl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 5

[opensuse] dell vostro 1710 and live-cd 11.4
by kanenas＠hawaii.rr.com 27 Apr '11

27 Apr '11

Tried the 11.4 live-cd on my Vostro 1710. The system booted up, things seemed to work, but the wireless card light never went on ant the slot used for camera memory chips is totally non functional. both items are fully functional in the main os of the laptop, suse 11.1 - x86-64, also in the windoze xp boot option. playing with Yast brought the message that the bcm43 firmware had to be intalled, clicked ok on it, still the wireless remained silent. Is there a way to get the wireless going in a live-cd boot? There is no space available for a test partition nor for a vm, so all testing must be done with the live-cd. also, any help in recognizing the sd (?) cards from cameras would be appreciated. thanks in advance, d. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] OpenSuse 11.3 and KDE 4.6.2 bad mix
by Tony 27 Apr '11

27 Apr '11

Upgraded kde 4.5.x to 4.6.2, after upgrade, I can not logout, reboot, or shutdown the computer via the kde menu options, anyone have a fix ? I found one fix that said to be sure the following was set in kdmrc |[Shutdown] BootManager=None HaltCmd=/sbin/halt RebootCmd=/sbin/reboot But does not fix the problem | No I'm not upgrading to 11.4, 11.4 has to many problems. For now I downgraded back to kde 4.5.2 Thanks in advance, Tony -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Webpin
by stuart＠bolin.org.uk 27 Apr '11

27 Apr '11

I am trying to find which repository I should use to get eclipse but I can't find webpin. I have tried yast's webpin interface but without success I can't find the website I used to just type webpin in google and it would be number 1 but now its not even on the first page!! So where has the webpage gone? What is the correct repository for eclipse and is eclipse the best ide for fortran is it eclipse for a linux newbie? Kind Regards Stuart Tanner Bolton Linux Sent from my BlackBerry® smartphone

3 2

[opensuse] PTH Package creation for zypper
by Ruben Safir 26 Apr '11

26 Apr '11

hello I need to create a package for PTH threads that can drop in and replace the current standard one for opensuse 11.2 is there a resource to help me do that, or walk me through the steps I need to make sure that the pth threads has the –enable-syscall-hard flag set for the OKWS web server. Uninstalling pth with zypper would seem to be a disaster for a whole slew of core suse utilities. Ruben -- http://www.mrbrklyn.com - Interesting Stuff http://www.nylxs.com - Leadership Development in Free Software So many immigrant groups have swept through our town that Brooklyn, like Atlantis, reaches mythological proportions in the mind of the world - RI Safir 1998 http://fairuse.nylxs.com DRM is THEFT - We are the STAKEHOLDERS - RI Safir 2002 "Yeah - I write Free Software...so SUE ME" "The tremendous problem we face is that we are becoming sharecroppers to our own cultural heritage -- we need the ability to participate in our own society." "> I'm an engineer. I choose the best tool for the job, politics be damned.< You must be a stupid engineer then, because politcs and technology have been attached at the hip since the 1st dynasty in Ancient Egypt. I guess you missed that one." © Copyright for the Digital Millennium -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Script wizards help needed
by Peter Nikolic 26 Apr '11

26 Apr '11

Right the this is a fun one involving web pages i use a page of basically the following line <a class="thumbnail" href="#thumb"><img src="stagepics/car4-0.jpg" width="100px" height="75px" border="0" /><span><img src="stagepics/car4-0.jpg" /><br /></span></a> to display a gallery of images from one of our recent rallys but i have somethingh like another 300 photos yet to go on lots of typing can someone point me in the direction of scripting this to automatically read the dir with the pictures in and fill in a line as above for each picture Pete . PS the web site is "qmc.org.uk" click on Photo Galleries and the D'Isis . -- Powered by openSUSE 11.3 (x86_64) Kernel: 2.6.34.7-0.7-desktop KDE Development Platform: 4.6.00 (4.6.0) 09:05 up 2 days 23:02, 4 users, load average: 0.23, 0.18, 0.10 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 6

[opensuse] HEADS UP: Your devices' UDMA may not be set correctly!
by Basil Chupin 26 Apr '11

26 Apr '11

A bug in the kernel has reappeared after being reported as fixed way back in 2009. It concerns the UDMA of your device/(s) not being set to the maximum limit because the kernel thinks that the device(s) is/are connected with a 40-wire cable when, in fact, an 80-wire cable is in place. This is my setup: IDE #1 connector- ata1.00 HDD with UDMA 133 ata1.01 CDROM with UDMA 33 IDE #2 connector- ata2.00 HDD with UDMA 100 ata2.01 DVDRW with UDMA 100 however the devices on line #2 are being configured for UDMA 33 because it is "limited to UDMA/33 due to 40-wire cable". Devices on line #1 are correctly configured (133 and 33 UDMA, respectively). There is a work around to this but I sincerely hope that someone who has access to the kernel maintainers can "hard code" this into the kernel rather than have this "workaround" inserted in the grub menu on boot time. The work around is this: add this to the boot parameters in the grub message: libata.force=X:=80c where X is the IDE line number (for example 1 or 2); in my case the problem is with devices on line #2 so I have added "libata.force=2:80c" and now these devices are both being correctly set to UDMA 100 - which makes a damn big difference to the transfer rates on these devices! ADDENDUM. The above fix is applicable when the libata is statically embedded in the kernel - and this is the case with the kernel in openSUSE 11.4 (2.6.37.1-1.2) - but when it isn't embedded then use "force=X:80c". (For those interested you can find discussion on this if you google or you can go to this bug report on another distrubution (Ubuntu) here: https://bugs.launchpad.net/ubuntu/+bug/195221 . BC -- Any experiment in life will be at your own experience. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] bacula sources
by Koenraad Lelong 26 Apr '11

26 Apr '11

Hi, I'm trying to install the bacula sources. I downloaded the src-rpm from the factory buildservice. Then I did : # zypper install bacula-5.0.3-19.49.src.rpm Loading repository data... Reading installed packages... '_tmpRPMcache_:bacula=0:5.0.3-19.49' not found in package names. Trying capabilities. 'bacula-director-mysql' providing 'bacula = 0:5.0.3-19.49' is already installed. Resolving package dependencies... Nothing to do. So it seems I can't install the sources because I have installed the binaries ? Any solution, --force does not help ? Also, why is bacula not included in the standard repo's for OS 11.4 ? B.T.W. the same problem exists with the 11.4 version of the buildservice. Is there a way to see the contents of an rpm ? On OS 11.1 I use krpmview, which seems not to exist in OS 11.4. Thanks for any pointers, Koenraad Lelong. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Barry backup for balckberry
by Peter Nikolic 26 Apr '11

26 Apr '11

Hi all Well i have barry backup working on opensuse 11.3X86_64 with KDE4.6.0 i have put the file on dropbox the links are below if anyone wante totry or use it , It seems to work ok for me i cant promise it will for you but may well do .. these rae the shortened links . http://db.tt/lfRtd63 http://db.tt/ggy6iP6 http://db.tt/DrLQ9vs http://db.tt/fMzbFSU http://db.tt/Uan5i2f Pete . -- Powered by openSUSE 11.3 (x86_64) Kernel: 2.6.34.7-0.7-desktop KDE Development Platform: 4.6.00 (4.6.0) 00:07 up 2 days 14:04, 4 users, load average: 0.69, 0.39, 0.30 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

← Newer
1
2
3
4
5
6
7
...
19
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users April 2011