August 2010 - openSUSE Users - openSUSE Mailing Lists

[opensuse] RandR
by Peter SHELLEY 27 Aug '10

27 Aug '10

Loaded SuSE Linux 11.0 then 11.1 and all seem OK, 1280x1024 (SXGA, Mode=0x31a) looked nice and then after checking at the "Yast/Hardware/Graphics Card and Monitor" it went bad. The "Yast/Hardware/Graphics Card and Monitor" still has the same settings but "Control Centre/Hardware/Display" has a note about RandR not having any configuration yet. Reading various sources has not helped me find out how to configure the RandR. The command "xrandr" gives the display resolution as 1024x768 when it should be 1280x1024. I cannot seem to get "xrandr" to modify anything !! How, when, where, what to do ?? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] 11.1v repos
by kanenas＠hawaii.rr.com 27 Aug '10

27 Aug '10

just checking, anything wrong with the 11.1 -x86-64 suse repos? some have been unavailable for more than a day., at least for me... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 10

[opensuse] weird mouse cursor
by Carlos F Lange 26 Aug '10

26 Aug '10

My mouse cursor in KDE4 suddenly looks like a long vertical shaded line. It does not change back when I change cursor themes. Any idea how I got this? How to get the normal arrow back? -- Carlos F Lange -- Recursive: Adj. See Recursive. -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Time Issues 11.3
by Tony 26 Aug '10

26 Aug '10

Howdy Running 11.3 with kde 4.4.4, and I've run into an issue with the system clock. I have the hardware clock set to local and of course the local time i'm on CDT, United States, Texas. I have used yast to set the timezone to Central (Chicago). I have dbl check /etc/localtime and /etc/sysconfig/clock, that it is pointing to central time zone. When the computer boots, the system clock is always set 1 hour in advance, the hardware clock is ok, until I shut down then of course the system time is written back to the hardware clock and now the hardware clock is off again. When update to 11.3 it worked ok, after adding the digital clock applet and using the adjust / date time in that applet is when the time started acting up. I have since removed this applet and removed config for it. At this point I'm thinking to turn off writing of system clock back to hardware clock, this is a band-aid fix, to me. Any suggestions help ? Thanks in advance, Tony -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] fetchmail daemon fails to start on 11.3
by Andre Truter 26 Aug '10

26 Aug '10

I installed a sever with openSUSE 11.3 and we use fetchmail on it. But when I try to start fetchmail, I get the following: --<snip>-- #rcfetchmail start Starting fetchmailfetchmail: can't find a password for fetchmail@/var/log/fetchmail. startproc: exit status of parent of /usr/bin/fetchmail: 3 --<snip>-- Any idea how to get the daemon to start? Thanks -- -- Andre Truter | Software Consultant | Registered Linux user #185282 Jabber: andre.truter(a)gmail.com | http://www.trusoft.co.za ~ Sometimes my mind wanders; other times it leaves completely. ~ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 15

[opensuse] YaST partitioner
by Dave Howorth 26 Aug '10

26 Aug '10

I really like YaST partitioner because it brings so many aspects of management together, so I use it quite a lot. In doing so I've noticed a couple of points and wanted to check whether anybody here had any information about them before I spend time trawling through bugzilla (they're not true bugs, more wishlist). (1) I still use the command line for various tasks alongside the partitioner. When I change anything via the command line, partitioner's view becomes out of date, which is expected. But the only way I've found to update the view is to close partitioner and restart it. It would be nice to have a refresh button. I'm using 11.2 so perhaps this is already available? (2) I like the Graph feature but I get confused about the file format, because I use it infrequently. The save dialog shows files of type .gv while the generated file is actually a DOT file. It would be useful if the dialog showed .dot files and/or if the help screen told users what the file format was and what application could be used to produce an image from the file. Again, I'm on 11.2 so perhaps this is already done. Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Kde 'info' pop ups
by ka1ifq 26 Aug '10

26 Aug '10

I just updated from 11.1 to 11.3 and for the life of me I can't find where to get rid of these pop up / hover over boxes. Thanks, Mike. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 4

[opensuse] rndis usbnet modules
by Valerio Mariani 26 Aug '10

26 Aug '10

Dear All, I am running OpenSuSE 11.3. Since I have an HTC legend Android phone, I want to use the usb tethering from it with my Linux box. In order to do this, I looked for an usb-rndis-lite-kmp package for 11.3. I did not find one (I only found one for 11.2 in the SynCE repository), so I just took the spec file and adapted it for 11.3. The module was built and everything works fine. I can us the tethering from the phone. Unfortunately, there are some modules from the kernel that I can't use any more. For example, once I modprobe the modules from the rpm package (usbnet, cdc_eth and rndis_host), if I modprobe sierra_net, I get: [90376.255544] sierra_net: Unknown symbol usbnet_change_mtu [90376.255847] sierra_net: Unknown symbol usbnet_open [90376.255932] sierra_net: disagrees about version of symbol usbnet_skb_return [90376.255934] sierra_net: Unknown symbol usbnet_skb_return [90376.256121] sierra_net: Unknown symbol usbnet_tx_timeout [90376.256505] sierra_net: Unknown symbol usbnet_start_xmit [90376.256664] sierra_net: disagrees about version of symbol usbnet_get_endpoints [90376.256665] sierra_net: Unknown symbol usbnet_get_endpoints [90376.256857] sierra_net: Unknown symbol usbnet_stop The problem seems to lie in the usbnet module. There are two, one from the kernel and on from my rpm pakcage. Sierra_net, which comes with the kernel, only works with the usbnet from the system. But cdc_eth only works with the one from my package. My question is: why? The "disagrees about version of symbol" error seem to point to the fact that the kernel and the new module were compiled using different compilers. But how is this possible? I always used the compiler from the 11.3 distribution. Has anyone more information on this? How can I build a module that is fully compatible with the kernel I am using (the kernel-desktop)? Valerio -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

Re: [opensuse] What's the purpose of Plasma?
by Anders Johansson 26 Aug '10

26 Aug '10

On Thursday 26 August 2010 17:24:27 Brian K. White wrote: > On 8/26/2010 7:33 AM, Michael S. Dunsaavage wrote: > > On 8/26/2010 5:23 AM, Ilya Chernykh wrote: > >> I have just discovered that in KDE3 you can imbeed any windows into the > >> desktop. The windows then has no borders, cannot be moved, shown > >> behind all > >> other windows, disappears from the taskbar and window selector. Like > >> as in > >> this screenshot: > >> > >> http://www.linux.org.ru/gallery/5266021.png > >> > >> Of note that the application have not to be specially written to allow > >> for > >> that. > >> > >> What's the purpose of Plasma then? > > > > You never stop do you? > > Actually, I think it's a perfectly valid question[...] ..which belongs on the opensuse-kde list (or opensuse-ot). Please stop Anders -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] rndis and usbnet modules symbol problems
by Valerio Mariani 26 Aug '10

26 Aug '10

Dear All, I am running OpenSuSE 11.3. Since I have an HTC legend Android phone, I want to use the usb tethering from it with my Linux box. In order to do this, I looked for an usb-rndis-lite-kmp package for 11.3. I did not find one (I only found one for 11.2 in the SynCE repository), so I just took the spec file and adapted it for 11.3. The module was built and everything works fine. I can us the tethering from the phone. Unfortunately, there are some modules from the kernel that I can't use any more. For example, once I modprobe the modules from the rpm package (usbnet, cdc_eth and rndis_host), if I modprobe sierra_net, I get: [90376.255544] sierra_net: Unknown symbol usbnet_change_mtu [90376.255847] sierra_net: Unknown symbol usbnet_open [90376.255932] sierra_net: disagrees about version of symbol usbnet_skb_return [90376.255934] sierra_net: Unknown symbol usbnet_skb_return [90376.256121] sierra_net: Unknown symbol usbnet_tx_timeout [90376.256505] sierra_net: Unknown symbol usbnet_start_xmit [90376.256664] sierra_net: disagrees about version of symbol usbnet_get_endpoints [90376.256665] sierra_net: Unknown symbol usbnet_get_endpoints [90376.256857] sierra_net: Unknown symbol usbnet_stop The problem seems to lie in the usbnet module. There are two, one from the kernel and on from my rpm pakcage. Sierra_net, which comes with the kernel, only works with the usbnet from the system. But cdc_eth only works with the one from my package. My question is: why? The "disagrees about version of symbol" error seem to point to the fact that the kernel and the new module were compiled using different compilers. But how is this possible? I always used the compiler from the 11.3 distribution. Has anyone more information on this? How can I build a module that is fully compatible with the kernel I am using (the kernel-desktop)? Valerio -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1