June 2010 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Uninformative error message when trying to mount an external partition
by Stan Goodman 16 Jun '10

16 Jun '10

Operating in v11.1, I have want to mount the /home partition of v11.2, so that I can transfer some files to the newer system. In the My Computer screen, I click MouseButton2 and select the Mount item. The system responds with the uninformative (to me) message: "org.freedesktop.hal.stprage.mount- fixed.auth_admin_keep_always<_(active,results)". I can mount it manually, but I would like to know what is bothering the system about selecting a menu item. -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Re: [opensuse-security] Howto restrict number of sshd sessions per minute
by Otto Rodusek 16 Jun '10

16 Jun '10

Admin TPdry wrote: > Dear Otto, > here is a command to extract the important ingredients of some data. > Please try it ... > > -- START COMMAND -- > cat /etc/sysconfig/SuSEfirewall2 | grep "^[^#]" > -- END -- > > best regards > Wolfgang > > #+#+ > > > Quoting Otto Rodusek <otto(a)applied.com.sg>: > >> Marcus Meissner wrote: >>> On Tue, Jun 15, 2010 at 10:40:22PM +0800, Otto Rodusek wrote: >>> >>>>> /etc/sysconfig/SuSEfirewall2 >>>>> >>> >>> Can you perhaps attach this file for review? >>> And which device is your network card? >>> >>> One suspicion would be you have the external network >>> card on the INTernal interface. >>> >>> Ciao, Marcus >>> >>> >>> >> Hi Marcus, >> >> I have a single ethernet card - eth0 - and I have defined it as >> "external" in yast2 firewall. >> >> Attached here is the listing of /etc/sysconfig/SuSEfirewall2. I'm >> going to feel like an idiot if you find something obvious!!! >> >> Much thanks for your help and advice. >> >> Best regards. Otto. >> >> ================================================================= Hi Wolfgang, I do apologize for just pasting the file instead of as you suggested just the important stuff. Please find below as requested. Hopefully someone can see what I'm doing wrong!! Best regards. Otto. ================================================================= FW_DEV_EXT="eth0 ppp0" FW_DEV_INT="" FW_DEV_DMZ="" FW_ROUTE="no" FW_MASQUERADE="no" FW_MASQ_DEV="zone:ext" FW_MASQ_NETS="0/0" FW_NOMASQ_NETS="" FW_PROTECT_FROM_INT="no" FW_SERVICES_EXT_TCP="10000 10001 1723 20 47" FW_SERVICES_EXT_UDP="" FW_SERVICES_EXT_IP="gre" FW_SERVICES_EXT_RPC="" FW_CONFIGURATIONS_EXT="apache2 apache2-ssl postfix samba-client samba-server vsftpd" FW_SERVICES_DMZ_TCP="" FW_SERVICES_DMZ_UDP="" FW_SERVICES_DMZ_IP="" FW_SERVICES_DMZ_RPC="" FW_CONFIGURATIONS_DMZ="" FW_SERVICES_INT_TCP="" FW_SERVICES_INT_UDP="" FW_SERVICES_INT_IP="" FW_SERVICES_INT_RPC="" FW_CONFIGURATIONS_INT="" FW_SERVICES_DROP_EXT="" FW_SERVICES_DROP_DMZ="" FW_SERVICES_DROP_INT="" FW_SERVICES_REJECT_EXT="" FW_SERVICES_REJECT_DMZ="" FW_SERVICES_REJECT_INT="" FW_SERVICES_ACCEPT_EXT="0/0,tcp,22,,hitcount=5,blockseconds=60,recentname=ssh" FW_SERVICES_ACCEPT_DMZ="" FW_SERVICES_ACCEPT_INT="" FW_SERVICES_ACCEPT_RELATED_EXT="" FW_SERVICES_ACCEPT_RELATED_DMZ="" FW_SERVICES_ACCEPT_RELATED_INT="" FW_TRUSTED_NETS="" FW_ALLOW_INCOMING_HIGHPORTS_TCP="" FW_ALLOW_INCOMING_HIGHPORTS_UDP="" FW_FORWARD="" FW_FORWARD_REJECT="" FW_FORWARD_DROP="" FW_FORWARD_MASQ="" FW_REDIRECT="" FW_LOG_DROP_CRIT="yes" FW_LOG_DROP_ALL="no" FW_LOG_ACCEPT_CRIT="yes" FW_LOG_ACCEPT_ALL="no" FW_LOG_LIMIT="" FW_LOG="" FW_KERNEL_SECURITY="yes" FW_STOP_KEEP_ROUTING_STATE="no" FW_ALLOW_PING_FW="yes" FW_ALLOW_PING_DMZ="no" FW_ALLOW_PING_EXT="no" FW_ALLOW_FW_SOURCEQUENCH="" FW_ALLOW_FW_BROADCAST_EXT="no" FW_ALLOW_FW_BROADCAST_INT="no" FW_ALLOW_FW_BROADCAST_DMZ="no" FW_IGNORE_FW_BROADCAST_EXT="yes" FW_IGNORE_FW_BROADCAST_INT="no" FW_IGNORE_FW_BROADCAST_DMZ="no" FW_ALLOW_CLASS_ROUTING="" FW_CUSTOMRULES="" FW_REJECT="" FW_REJECT_INT="yes" FW_HTB_TUNE_DEV="" FW_IPv6="" FW_IPv6_REJECT_OUTGOING="" FW_IPSEC_TRUST="no" FW_ZONES="" FW_ZONE_DEFAULT="" FW_USE_IPTABLES_BATCH="" FW_LOAD_MODULES="nf_conntrack_netbios_ns" FW_FORWARD_ALWAYS_INOUT_DEV="" FW_FORWARD_ALLOW_BRIDGING="" FW_WRITE_STATUS="" FW_RUNTIME_OVERRIDE="" FW_LO_NOTRACK="" -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] K3b question
by James Hatridge 16 Jun '10

16 Jun '10

Hi all, When I try to burn a CD I get this error: cdrecord has no permission to open the device. It happens as user or root. How do I fix this? Thanks! JIM -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Stange emails arriving in Kmail Inbox.
by ianseeks 16 Jun '10

16 Jun '10

Hi I'm using these versions Opensuse 11.2 KDE4 : Factory Kontact: Version 4.3.5 Kmail: Version 1.12.4 Here is the sample text I am getting ------------------------------------------ Status: R X-Status: N X-KMail-EncryptionState: X-KMail-SignatureState: X-KMail-MDN-Sent: Subject: Date: Sunday 07 Feb 2106 From: To: 1 UID35-1224801402 2 UID36-1224801402 3 UID37-1224801402 ------------------------------------- The number of "UID" lines can vary from 1 upwards but this morning i got 35 emails like this. Anyone know whats going on? I realise its a Factory release but i was wondering if anyone else is getting these emails? They do not appear on my POP3 ISP inbox so it must be Kmail creating them. regards Ian -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] fun bash script to automate creating url lists for file download (especially from repos)
by David C. Rankin 16 Jun '10

16 Jun '10

Guys, I frequently need to pull multiple files from a remote host and I like to do it with a list of links that I just feed to wget with the -i option (and -b) and let it do its thing. The only pain is building the 'getfile' list. I wrote a little script that helps. If you are interested, you can grab it at: http://www.3111skyline.com/dl/dev/scr/net/lynxdump.sh As the name implies, it uses 'lynx -dump' to generate the list and then it parses the return to leave just the links in the output file. Normally, it will just create an output file with all links from the urls given on the command line in a single file 'without' any subdirectories included. Two options modify this behavior [-d|--dirs] causes subdirectories to be included and [-r|--rpms] return only links to rpms. (very handy for repos). The main timesaver of the script is the [-b|--base] option that tells the script to grab the baseURL from the next argument and use that for any subsequent directories specified on the command line. (again, very handy for working with repos -- you never have to enter the full url twice). For example, if you wanted the 11.2 libusb0 packages for i586, x86_64 and the src rpms, all you would need to do is: lynxdump -b http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/i… src x86_64 -r to grab the binary and src.rpm links and eliminate all the mirror and metadata junk. The default output file is ./lynxdump.txt [or as specified with the -o option]. In the case above, here is the output file you would get: 01:10 alchemy:~> cat lynxdump.txt http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/i… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/i… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/i… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/s… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/x… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/x… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/x… http://download.opensuse.org/repositories/hardware:/libusb0/openSUSE_11.2/x… All that is needed to retrieve the files now is 'wget -i lynxdump.txt' and your done. The script works equally well on 1 URL or 50 URLs. The only limitation is you cant specify more than 1 baseURL ( two -b options are not allowed). The script is reasonable commented and can be quickly adapted to handle time when you just want the .tar.gz files, .pdf files, etc... For those wanting to learn bash scripting a little better, this is a good script to dissect for a look at command line parameter handling with an array, array indexing, bash functions and returns, etc. Here the option specification order or position in the command line is unimportant. (obviously if you specify -b or -o, the next parameter must be a URL or output file, respectively. DNH, all, you see anything I could do better, let me know. I tried to rework the getdump() function to simply build the dumpSTR (see ## Scraps) at the bottom of the script, but I couldn't get lynx to accept a variable containing the pipes, etc... I was wanting to eliminate the 3 calls to lynx -dump in the function and simple pass the dumpSTR to a single call of lynx -dump at the bottom of the function, but ... "no dice." Thanks for any feedback you can offer. Enjoy :p -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] Making a DVD of a XEN image
by Bruce Ferrell 15 Jun '10

15 Jun '10

I have a XEN image of OpenSUSE. I want to make it into a DVD I can use to install to a "real" machine. Does anyone know if this is possible or a way to accomplish this goal? thanks in advance Bruce -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Fwd: Re: [opensuse] Re: How to install tar.bz
by Doug 15 Jun '10

15 Jun '10

I sent the following message to Jim Henderson, whose input was very useful, but now that I have T/B ver. 3.0.4 on the machine, it won't send. Jim's answer, and my original to him, follow: -------- Original Message -------- Subject: Re: [opensuse] Re: How to install tar.bz Date: Tue, 15 Jun 2010 08:57:43 -0600 From: Jim Henderson <hendersj(a)gmail.com> To: Doug <dmcgarrett(a)optonline.net> You may want to ask back on the list - I don't use Thunderbird myself. I vaguely recall that this is a setting in the server/account settings. Jim On Tue, Jun 15, 2010 at 00:33, Doug <dmcgarrett(a)optonline.net> wrote: > Hi, Jim-- > > Well, it almost worked. After a bunch of futzing, I got t/b > 3.0.4 installed. It receives OK, but it won't send. When > trying to send, one gets an error message as follows: > ______________________________________________________ > Sending of message failed. Unable to authenticate to > SMTP server mail.optonline.net. It does not support > authentication (SMTP-AUTH) but you have chosen to use > authentication. Uncheck 'Use name and password' for > that server or contact your service provider. > ______________________________________________________ > > Well, I looked all over for a place to uncheck "Use name and > password" and I cannot find it anywhere, nor do I find any > reference anywhere to authentication. > > This message is being sent from Windows t/b, ver 3.01, which I > know will send. > > If you can help in this area, I would appreciate it. If I > call the server, they will tell me they know nothing about > Linux. > > Thanx--doug > > -- > Blessed are the peacemakers...for they shall be shot at from both sides. > --A.M. Greeley > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] How to install tar.bz
by Doug 15 Jun '10

15 Jun '10

I guess somewhere in my dim past, I read how to convert .tar.bz to .rpm and then maybe Yast would install it. This is a follow-up to the email problem thread. Someone said there's a version 3 of Thunderbird, and there is: I d/l'd Thunderbird-3.0.4.tar.bz. (The system said I should d/l to ark, so I let it. Now somewhere on the computer, I know not where, there's a whole slew of files that were in the .tar.bz. [There's a thunderbird- 3.0.4.tar-1 in /doug/users]) (Yast could not find Thunderbird. 3.0.4.tar.bz, even tho I could find it on the net, with the help of the old t-bird. Yast can only find a 2.x version.) Now what? Please reply in words of one syllable, or similar. I really don't understand much jargon. --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Howto restrict number of sshd sessions per minute
by Otto Rodusek 15 Jun '10

15 Jun '10

Hi ListMates, I'm trying to resolve a problem with Susefirewall2 that I've had for some time and I'm hoping to get a resolution if possible. I'm trying this on a Dell Server T110 using opensuse linux 11.2 - uname: Linux bunyip 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/Linux. I'm trying to restrict the number of sshd login attempts to only 5 per minute and no more. I've read the docs and have modified /etc/sysconfig/SuSEfirewall2 (FW_SERVICES_ACCEPT_EXT="0/0,tcp,22") to (FW_SERVICES_ACCEPT_EXT="0/0,tcp,22,,hitcount=5,blockseconds=60,recentname=ssh"). If I check my logs I can still see that MANY sshd login attempts still happen within the 60 seconds. I have installed a perl program to catch and firewall those culprits BUT I would still like to know why the above code doesn't seem to work. Have I forgotten to edit something else? Any help would be much appreciated. If it helps, below is the result of the iptables -L - maybe someone can spot something here? Again much thanks for any help in this area. bunyip:/etc/sysconfig # iptables -L Chain INPUT (policy DROP) target prot opt source destination DROP all -- 60.210.8.234 anywhere DROP all -- 59.151.119.180 anywhere DROP all -- 61.160.249.80 anywhere DROP all -- 118.45.235.157 anywhere DROP all -- 210.51.191.232 anywhere DROP all -- pd95b8832.dip0.t-ipconnect.de anywhere DROP all -- 218.75.79.18 anywhere ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state ESTABLISHED ACCEPT icmp -- anywhere anywhere state RELATED input_ext all -- anywhere anywhere input_ext all -- anywhere anywhere LOG all -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-IN-ILL-TARGET ' DROP all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination LOG all -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-FWD-ILL-ROUTING ' Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state NEW,RELATED,ESTABLISHED LOG all -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-OUT-ERROR ' Chain forward_ext (0 references) target prot opt source destination Chain input_ext (2 references) target prot opt source destination DROP all -- anywhere anywhere PKTTYPE = broadcast ACCEPT icmp -- anywhere anywhere icmp source-quench ACCEPT icmp -- anywhere anywhere icmp echo-request ACCEPT udp -- anywhere anywhere udp spt:netbios-ns state RELATED ACCEPT gre -- anywhere anywhere LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ndmp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:ndmp LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:scp-config flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:scp-config LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:pptp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:pptp LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ftp-data flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ni-ftp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:ni-ftp LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:http flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:http LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:https flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:https LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:smtp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:smtp LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:urd flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:urd LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:netbios-ssn flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:netbios-ssn LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:microsoft-ds flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:microsoft-ds LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ssh flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:ssh LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ftp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpt:ftp LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpts:30000:30100 flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP ' ACCEPT tcp -- anywhere anywhere tcp dpts:30000:30100 ACCEPT udp -- anywhere anywhere udp dpt:http ACCEPT udp -- anywhere anywhere udp dpt:https LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ssh state NEW recent: CHECK seconds: 60 hit_count: 5 name: ssh side: source LOG level warning tcp-options ip-options prefix `SFW2-INext-DROPr ' DROP tcp -- anywhere anywhere tcp dpt:ssh state NEW recent: UPDATE seconds: 60 hit_count: 5 TTL-Match name: ssh side: source LOG tcp -- anywhere anywhere tcp dpt:ssh state NEW limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC ' ACCEPT tcp -- anywhere anywhere tcp dpt:ssh state NEW recent: SET name: ssh side: source ACCEPT tcp -- anywhere anywhere tcp dpt:ssh DROP all -- anywhere anywhere PKTTYPE = multicast DROP all -- anywhere anywhere PKTTYPE = broadcast LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT ' LOG icmp -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT ' LOG udp -- anywhere anywhere limit: avg 3/min burst 5 state NEW LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT ' DROP all -- anywhere anywhere Chain reject_func (0 references) target prot opt source destination REJECT tcp -- anywhere anywhere reject-with tcp-reset REJECT udp -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-proto-unreachable bunyip:/etc/sysconfig # -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 13

[opensuse] Need help with apache2/gallery2 problem
by Patrick Shanahan 15 Jun '10

15 Jun '10

A recent update has left me unable to albums and pictures to my web gallery. openSUSE 11.2 x86_64 kernel-desktop-2.6.31.13-18.1.x86_64 apache2-2.2.15-16.1.x86_64 gallery2 v2.3.1 (installed using gallery2's package - as I have done for several years) php5-5.3.2-23.4.x86_64 When attempting to add an album I get the response that the connection has been closed before receiving data for the request. /var/log/apache2/errors shows: [Sun Jun 13 12:22:53 2010] [notice] child pid 26923 exit signal Segmentation fault (11) Changes that I can document or remember since last successfully adding albums and pictures to gallery2: kernel update from kernel-desktop-2.6.31.12-0.2.1 apache2-mod_php5-5.3.2-23.4 pam-modules-11.2-4.2.1 php5-mysql-5.3.2-23.4 php5-5.3.2-23.4 hal-0.5.13-4.2.1 mysql-5.1.36-6.8.8 mysql-client-5.1.36-6.8.8 mysql-tools-5.1.36-6.8.8 *any* help appreciated tks, -- Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://counter.li.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 6